Don’t Crack Up: Protect Tile with a Crack Isolation Membrane

Help prevent cracked porcelain, ceramic or stone tile installations by using a crack isolation membrane that meets ANSI A118.12. Learn how to use liquid or sheet membranes with TCNA Detail F125 to treat cracks in the concrete slab and protect tile from ongoing substrate movement.
Today’s tile and stone assemblies need effective crack isolation!
Why? Structures are built faster, using lighter materials, which leads to increased substrate movement. Add large format tile, and it creates a perfect storm for breakage. All of these factors make crack isolation a critical part of modern tile assemblies.
As you know, the tile contractor is responsible for accepting that the substrate is suitable for tile installation.
Traditionally, a wire-reinforced, 1-1/2” thick mortar bed was used with a cleavage membrane to separate the tile from the substrate.
Now, the best way to prevent cracked tile is to include an isolation membrane. The membrane avoids the mass, weight and height of a mortar bed, while providing better protection to the tile.
Crack isolation membranes are designed to deform with movement, absorbing some of the force, which helps to prevent cracks from transferring to the tile and grout.
For the best results, install a product that meets or exceeds the requirements ANSI A118.12 for high-performance. These membranes isolate tile from horizontal, in-plane substrate movement up to 1/8".
When choosing a membrane, consider end use factors beyond the existing condition of the substrate. Will the tile assembly be exposed to thermal cycling, deflection or heavy traffic? Will the project need waterproofing or impact sound reduction? Many crack isolation membranes offer these additional features.
Liquid membranes provide the simplest, most versatile installation option. They’re faster to apply than sheet membranes, but cure time depends on environmental conditions.
These elastomeric membranes elongate to absorb horizontal movement from the substrate. Always follow the manufacturer’s instructions carefully to achieve the correct film thickness.
The components in sheet-applied membranes vary, but all are installed using primers, adhesives or mortar. Most can be tiled right away.
They do require extra labor for measuring, cutting and piecing together, so plan accordingly.
For tiling over young concrete less than 28 days old, an uncoupling mat membrane provides the best solution.
Air space is part of the design, which allows moisture to escape while absorbing movement stresses to keep the tile and grout intact.
The TCNA Handbook describes use of crack isolation membranes in Detail F125.
Partial coverage addresses existing cracks, while full coverage of the substrate also helps protect against future cracks.
Instead of placing a movement joint directly over an existing crack, F125 partial allows them to be relocated to the next tile joint.
This involves installing a section of membrane over the crack to avoid bonding to the concrete under these tiles. Each section should measure three times the width of the tile along the length of each crack.
On substrates with numerous cracks, or under large format tile, F125 full coverage is recommended, as it provides better protection during future cracking of the slab.
Unless full coverage is specified or approved by the owner, the installer’s responsibility is limited to partial coverage.
For either F125 application, pre-existing shrinkage cracks exceeding 1/8” should be patched prior to membrane installation.
The tile assembly may also require one or two additional soft joints parallel to the relocated cracks, depending on the manufacturer’s recommendation.
Always follow the membrane manufacturer’s directions carefully for the most effective protection.
Remember, crack isolation membranes cannot be used to treat construction, isolation or cold joints.
Any joints that are intended to move must be carried through the tile assembly.
Also, any differential crack may be structural and must be assessed by an engineer, as these cannot be relocated with a membrane.
Ultimately, a crack isolation system controls and directs movement to the soft joints in the tile assembly and this help the tile stay bonded.
Installing movement and perimeter joints per TCNA Detail EJ 171 is critical - even with membrane!
The use of ANSI A118.12 crack isolation membranes is an important investment. Membranes protect the tile assembly and significantly increase its life expectancy.
For more information on crack isolation, consult the references at the end of this video or contact the National Tile Contractors Association.

[@IppiopaidFEEDBACK]

Damn I love technical talk, my brain just gets excited when it hears it. This gives you a greater respect for tilers and what they have to do.

[@SF-fb6lv]

Really really good stuff, well presented, information-rich content. I had no idea these materials even existed.

[@randorfja]

Thanks for this video!

[@murphyshsu]

Really good video!

[@nitro7726]

great video

[@lorenzoalmanza4765]

Excelente información gracias por compartir,

[@turq57nomad]

I have some very small hairline cracks in some self leveling concrete poured over a concrete floor that I wanted to paint. Would this product help cover/seal those small cracks and can I paint over it?

[@dahartwick]

My outdoor entrance way tile was installed two years over a control joint with some sort of membrane. Water penetrated the tiled surface under the membrane and eventually the tiles have separated from the membrane and thin set and raised up or broken the grout allowing more water to enter. To repair, should I replace the membrane or re-install my tile in a manner than does not cover up the control joint? Thx.

[@castanedagus]

Can I apply the liquid membrane over a concrete stain? My patio tile wax removed and contractor said the stain would be sufficient. But if stains really easy and I hate it. So I’m going yo told it over it’s 20’x18’ in size

[@matthewhegstrom8478]

I wish this guy was my dad.

[@hulk01921]

Not only Structures are building faster using lighter materials, every thing now days is junk

[@miacarlany]

Im interested in purchasing your this product for a concrete basement floor that keeps suffering from moisture and efflorescence issues. Will this seal areas that have efflorescence? and can you put tile over it once it dries?

[@lyndagruen2047]

I'd recommend consulting a licensed structural engineer or chemist. I am neither, just a homeowner, although I minored in geology in college - schooling that included introductory coursework in aqueous geochemistry, minerology / petrology, hydrogeology, structural geology and geophysics. (A lot of geology is chemistry. A good bit of it is also physics, with biology playing a role in hydrocarbon deposits and sedimentary rocks.) I can almost guarantee you that you will continue to have problems until you address the water issue. You would need to divert the water, seal the outside from further damage, maybe install a sump pump or similar - something like that - because even with the benefits of these fancy products, chances are that the amount of water you're noticing will still be beyond what these fancy products are capable of handling. Also, I don't know how much this matters when it comes to tile installation, but rainwater oxidizes concrete, as commonly found in many basements. The reason for this is due to the lower pH of acid rain, vs. the relatively high pH of new concrete. So, concrete exposed to the elements ends up with a lowered pH over time. The lower pH oxidizes the steel rebar or post-tension cables in the concrete slabs, which results in cracks and foundation failure over time, because the rusted steel in the concrete expands. It is probably repairable, but it may take a lot of labor, engineering expertise and money. So, to summarize: take care of the water intrusion before installing tile. That would be my suggestion.

[@miacarlany]

@@lyndagruen2047 you are a year too late. this issue was taken care of year ago when the comment was new. You should check dates of comments

[@galactus211]

@@miacarlany lol

[@Aahfjfkakndnf]

@@miacarlanyno need to be a dick. damn. 💀

[@pramodpandit236]

I would like to work in your team

[@alexcastaneda6830]

You don't answer questions so thumbs down no follow

[@MRFLAPPYTREE]

This a KZbin channel not your personal assistant

[@alexcastaneda6830]

@@MRFLAPPYTREE Ok Karen

[@svengalilord]

@@alexcastaneda6830 OK Cancel Culture