Don't (EVER) Remove TERMINAL 15 OR TERMINAL 30 On Your BMW !!

Don't (EVER) Remove TERMINAL 15 OR TERMINAL 30 On Your BMW !!
Click Here To Buy the Autel Maxisys MK808BT
amzn.to/319tvGd
Click Here To Buy The Autel MaxiCOM MK908P
amzn.to/2Sh8aq3
Click Here To Buy The Light Holding Clips
amzn.to/2GIFGT6
Click Here To Buy The Lights Used In My Video
amzn.to/3nN0v0C
Click Here to buy the Forte Power Steering Treatment
amzn.to/2ycpjd1
Click Here to buy the Temp Gun Used In my video
amzn.to/2U92AWE
Click Here to buy The LED Bulbs shown in my video
amzn.to/2Q89zxR
Click Here to buy The Forte Gearbox Treatment
amzn.to/2SPewgF
Click Here To Buy The Autel MaxiCOM MK908P
amzn.to/2Sh8aq3
Click here to buy The Glovebox Scanner
#BMWTERMINAL30 #BMWTERMINAL15 #BMWE60
amzn.to/2GbNN6W
Click here to buy the Oil system Protector
amzn.to/2rNmXyz
Click here to buy the forte advanced engine motor flush treatment
amzn.to/35mxfnJ
Click here to buy the camera used for my videos
amzn.to/2PJpe5H
Click here to buy the camera holder used to film
amzn.to/2YO1elR
Click here to buy my second camera used for filming
amzn.to/2RRJyV3
Click here to buy my third camera used for my videos
amzn.to/34j1Cu0
Click here to buy the tripod used for my filming
amzn.to/38EE6eb
Click here to buy the ICOM used in all my diagnostic videos
amzn.to/2YMjBrD
Click here to buy the K DCAN Cable used in my videos
amzn.to/38Najic
Click here to buy the cable needed for F & G series cars
amzn.to/2sqp2Ao
Click here to buy the Forte Petrol Saver
amzn.to/2P33bYu
Click here to Buy Forte Oil Fortifier
amzn.to/2s6f3Qh
click here to buy the forte seal conditioner for valve stem seals without removing head and rear main seal
amzn.to/33Y7ubY
click here to buy the forte top end treatment for diesel and petrol cars
amzn.to/2P2lcX2
click here to buy the forte injector cleaner for all PETROL cars
amzn.to/36e0Mjr\
Click here to buy the forte injector cleaner for all DIESEL cars
amzn.to/38h7hnp

[@BMWDoctor]

Click Here For The Newer Video Regarding Terminal 30 , Terminal 15 , Terminal 30G_F Faults With Full explanation as to why it happens and how to solve it kzbin.info/www/bejne/b3vLZpiGrtGAobM

[@Nastrusnicu]

The terminal 15 on e92 it's not located in the trunk. At least on the UK version. Where can I find him? There's no crank Thanks a lot

[@SaNdMaN3000]

Out of topic question, i got a e60 3.0d 218bhp did a egr and dpf delete + stage 1. At the moment i got a maf and map sensor error and increases emission message. My question is, the map sensor should it be replaced with a higher boost one as in to read 3-4 bars or just the stock one would do? Or should i try one out of 535d?

[@ellaharrrecoverycarsales1406]

Hi , very good videos , lots of info new to ownership of e60 , I’m getting taillight failure come up even tho all brake lights work, also what’s thoughts on auto box on 520d 06 is there a filter to replace got malfunction fault once ? Any help would be appreciated! Thanks

[@stuparualexandru]

Hi Dean, I have been watching almost all your YT videos regarding e60 and you really helped me alot with other issues now fixed, now I am stuck with a CAS error A0C0 terminal 15 output 3 ... my car is a BMW E60 520i M54B22 2003. The car cranks but no start and also get the Ignition Faulty on screen and a red car on stand with diamond key in position 2. I changed the battery, ibs ,ignition switch wire harness to cas (14pin) the transponder. Key is ok checked with Inpa. With Ista i get the same a0c0 cas error but no other issue. I did checked all fuses in rear fuse box, glove box. Changed terminal 30 relay, the green relay in globe box. Checked voltage on battery ok, front under bonnet ok, grounds are ok, starter connections are ok. Looking at your videos for this type of issue i am stuck at why the car shows ignition faulty on terminal 15 output 3 Value above threshold and no voltages or amps to be able use a voltmeter. I pulled out as much information as i could from ista+. If you are aware of this type of issue please help with advice. Regards.

[@grankulla2]

He I have problem with my bmw e61 530xd 08 No power to left side headlight,rearlight And got this terminal 30B with no power. What is needed to be replaced?

[@nazzan3801]

Truly one of the most experienced BMW experts I’ve ever seen if not the most, and I’ve seen a lot trust me, never useless videos nor useless infos, wondering how u still haven’t been hunted by one of the giant corporations man, Many of BMW owners went or going through hell from dropping their cars over and over from dealership to another just to know what’s wrong with their cars and what’s causing but no luck, while u my friend lying it all out, the cause, the diagnose, solutions, and in a very straight forward style... thanks a lot It’s highly appreciated, wanted to tell you this in a while before asking any question or anything, it’s is very nice of u, thanks a lot and God bless

[@nickmatthews4939]

It's always good to see your YT BMW videos. Hopefully my Z4 roadster is not suffering IBS - Irritable Bowel Syndrome. Another 👍🏻s up

[@sharamrock2580]

Brother, you are amazing in your expertise. The information you are providing in this video answers what I have been researching and asking for a long time. Thank you!!!

[@mkm7962]

Invaluable information on these cars which I am very grateful of, not had any of these problems as of yet but still find this very interesting 👍

[@MarioDallaRiva]

Fantastic information, Dean! 👍🏻 The electrical info is super interesting.

[@driponnahoelip6550]

Being American in America I realize more and more Europeans understand BMW 1000X better than we do here smh. Fixed starter, alternator, and starter when it was something this simple 🤦🏿‍♂️ you definitely have a new subscriber boss!

[@clau2xlc]

Freshly subscribed! Good work & Congrats 🍾

[@chrisphillipson9505]

Interesting stuff. Just replaced the entire rear power distribution unit on my e61 today as it had been soaked by sunroof leak under previous owner and was heavily corroded. This solved a few electric problems I was having, but still left with 2 annoying ones: 1) heated rear window is ALWAYS on even when ign is off 2) car will not wake up using remote key fob but will on key in lock. Once unlocked and awake remote fob works as expected Both issues doing my head in. Was interested to see that red wire bridging 2 looms in your video. I have the same and assumed it wasn’t factory

[@Putnam1103]

Thank you Dean, this was very informative and I will definitely check before removing my starter on my 08 750li

[@Enchong50]

Thanks Dean it was very helpful and important to us Bmw owners

[@CarlosEduardo-ci6iz]

Awesome video. I got my question answered. Thanks, Doc!

[@Trond_Karlsen]

Great info! I guess this goes for the F-series as well, I have a power leak and an "8040bd reset or deactivation of terminal 30f" and an "80442a light operating unit BEL: Rotary switch is defective" error so I guess the rotary switch (whatever that is) is failing and triggering the terminal 30. Thx for the input!

[@steveallam]

Dean you are the man! Great video Sir👌🏻

[@baratha_aquatic1927]

Thanks so much bro 👌Its working when i have this problem with my e60 Good job and always keep healty guys 🤗

[@4bearz-reztorationz509]

Very good information thanks man ill be checking more of your videos!!

[@blessedbeyondmeasure5070]

Great info. My car stuck in park, mechanic has had it for almost 4 weeks. I asked them to check fuses first.

[@singhsarabjit]

Hello. Did you figure it out? thank you G

[@naeemyamin4925]

Great video Doctor.

[@micheldenbesten2382]

Thx Dean i hope my car Starts en Run ,because its cranking but no start...No fuse are blown..I.ll hope its Runs, I.m out of options dock

[@tomtom4633]

Hi great video very well explained, I have seen terminal 15 reset on my wurth diagnostic tablet when plugged into a 2012 520d, I've got no front or side left indicators and both halos not working and a long list of fault codes, can you recommend anyone who will test the frm? Is it possible to fit standard lights (not the expensive hella afl xenon) and be able to have lights without any coding needed?

[@MadCrack3r]

I have a 2012 750 xDrive that sometimes throws errors on ignition start related to ABS, Parking Brake, and Traction Control. Othertimes it will show DriveTrain Malfunction. If I crank in a certain sequence it does not have the problem. I have to Power the car off, driver door as if exiting the vehicle, close the driver door, and then wait for the dash lights to go out on their own based on the timer setting. It is usually 30 seconds. I was looking for a faulty ground wire, but I am going to check your relay suggestion as well. Very good video. Thank you! --Matt

[@MohammadAbuYousuf]

very useful information. thank you from KSA

[@michaelmulle8110]

Alright Dean, I have a BMW e92 320i coupe. I removed fuse 30 as I have seatbelt and airbag light on. On the fuse list it states fuse 30 is for seatbelt that why I removed fuse, I did remove other fuses. My car cranks but does not start, do you have any advice? Regards, Mike

[@agoodneighborautorepair2176]

Very good explanation and information,thanks and blessing.

[@robtzg]

Thanks heaps!. But my 08 740i is different. Where on earth can I find dme relay in e65? Thanks!

[@coolarrow9127]

I came out to my car a few months ago and it was DEAD. its a 2014 550i. someone was looking at me and said the headlights had been on and flashing. alsoihear some clicking in my glove and trunk. I didnt know what the hell was going on, it was like the devil was controlling my car...lol. I pulled a relay out or the glove that was clicking, and again in the trunk. I measured the battery it was doun to 9.9v. after looking into it i found out about terminal 15, 30 and there was one other. i love learning about my car, Im mexican and i love learning about my german babe!! This guy is awesome, look at his videos before your car breaks down so you know what's going on with it.

[@sebczajna700]

Good video, but i have two question; 1. For relay diagnostics can I this relay pull up? 2. Can I replace battery in BMW E60 without voltage support?

[@joe52567]

Hi Dean, do you have any experience with the error retrieved from ISTA code 000090 IKE: Voltage supply, terminal 15, faulty or INPA code 144 Terminal 15 open circuit ECU: IKI. Vehicle: 04/99 BMW e39 m5, Symptoms: when engine is at operating temp longer than usual cranking required to start the car, but if you turn key to pos "0" and try again all is ok Thanks in Advance

[@hassanpakarachie8728]

The only Bimmer KZbinR I believe ❤ Inspired by you I started my channel on Bimmers as well

[@aamiryaqub1]

Great video! G12 bmw. Front end smash airbags deployed. Now power to the tailgate and unable to open boot. Anyway of opening the tailgate from front fuse boxes?

[@lefora87]

this man is gold.

[@godla26]

Hi Dean I have simular problem with my e60 m5. I had problem with radiator fan turning on and sometimes off so my car would start overheat but just sometimes. So my friend chased the wires to this Jackson behind the fuse box in the trunk . So I replaced this Seminole with power bar in it and now the radiator fan works all the time accept when the car sits over night I can't start and no crank looks like the starter is gone but I keep trying for 5 - 10 min. And then it starts and it starts everything after that first start. And then over night same problem again. My buddy may took couple relays and fuses out before so I don't know even when we scan the car it's shows CAS but not the issue. Also I found GPS tracking device from previous owner so I took it out. We did lots of thinks at one time and now it's hard the find the cost. And also it's draining the battery fast. If I don't start the car in week or two then I can't start due to battery low. Please any ideas? Thank you for your videos

[@kurwinramsran8509]

Hello is that the audio wiring with all the different colors wrapped up in the black tape? I'm trying to tap into a speaker wire to run a low input rca box? Thanks

[@alainmartinez9930]

Thank you for your videos. Always great content and great advice. I have a 2008, 328xi US with I-Drive and it will not crank. I ran a data stream with "Protool" and the automatic transition signal is stuck stuck in 5th gear while in park or any other position for that mater. What should I be looking for? Thank you in advance.

[@760sky9]

Transmission range sensor.Sometimes called Park neutral safety switch I believe.

[@kevinbaker2470]

Should be lookin for a Toyota, Honda, or Ford 😂

[@likasomebodiefakku]

@@kevinbaker2470 fords suck

[@justinplowman7442]

Proper. Wish this was available for e46 chassis. Took me weeks to trace down a failing relay. 🙃 sounds dumb but the relay was allowing enough current to give false readings but not viable as heat built up across the relay from increased resistance etc etc... Thank you Sir for great information quickly.

[@MyManTman]

what relay did u fix on your e46 i had a terimal 15 code and am having kbus issues.. lmk man

[@donaldburdette3344]

I have E46 where is the relay u speak of

[@marionatour8051]

i appreciate you BMW DOCTOR THANKS A MILLION .IF YOU EVER THINK OF VISITING FLORIDA I LOVE TO SEE YOU

[@stevenerekson3415]

Where are these relays found on the e90's? I've seen the relay 30 in the glove compartment, but I don't think I know where the terminal 15 and those 100amp fuses are.

[@pjhoneycut]

Man it's hard to watch a key being shaken about. Good info man , thank you.

[@BigLifeAhTellYuh]

😓

[@gjergjenrigentianarbersino4862]

Hello Doc.Can you please let me know the location of cooling fan relay, on a 2010 e60 528i xdrive according to BMW dealership Its in the trunk but it's not there or neither in the glove box or neither inside fender box. can you please let me know if you have the knowledge.Thank you.

[@newtonthairu4292]

So much information in just 12 minutes!!

[@rickyroquejr.6496]

Thanks for the video great info on the electrical portion. Will check some of those areas & see which one needs replacing. My idrive went dark, no sterio, cd & dvd ejection buttons stay lit as well as the parking gear area stays lit all the time,causing battery to drain. Will check all fuses & reinsert some of the relays to see if it starts working. removed the ccc and saw the fan ejected on the ground . attached everything back on after 2.0 hrs of work slowly while sipping on a cold cheve & still same situation. I also replaced the fuse on back of the ccc module. no luck. Will check the fuses under the floor trunk & see what is dead.

[@gatiyovideo]

Did you figure it out ?

[@Harpo1]

I there I have been looking at your videos great stuff I have just bought a f40 128 ti and because I work away all week when I come home the battery doesn’t turn over very good can I put a solar panel tricycle charger on the jump connection under the bonnet I used to use this on my Golf GTI and had no problems hope you can help mike

[@vallenatos26]

E60 kicks ass!!!!!! Dean you are the man !!!!!!!!

[@shuroopceo]

Thank you for useful information...I don't know if I can ask a question. I have a bmw e66 750 and once a month the crankshaft and start motor are running but it won't start. But it starts the next morning, is this also related to the relay? Or does it have something to do with the b-pillar sensor?

[@crazychild2002]

Did u fix

[@miniulabsreview7744]

Hi just quick question I have bmw f10 and after diagnostic scan come out with terminal 30 relay under voltage is that mean I need to replace the terminal 30 relay ? If yes should I disconnect battery before replacing this relay ? Many thanks for your response.

[@battlehrfred]

Great information dean ty for sharing your Knowledge sir ty 100-100 excellent

[@tomkaraitiana6136]

Thanks for that bro. My 2008 135i has that no crank no want to go thing happening to it and every time l go to start it l get this buzzing sound coming from around the fuse box some where. What's going on there bro?

[@sanjverma8256]

Hi there, great video. My 2012 bmw is will not crank at alll. Battery is good, will this apply?

[@italianjob-vx6hp]

Hello Dean , have you had the latest recall done?

[@bilalahmed2386]

Looking for a remote off solution for an aftermarket amplifier. Which of these goes on/off with the car? Cheers

[@SultanAU]

Hi I have 2015 F32 just repaired after impact incident. Airbags were replaced, tensioner replaced, crash data cleared but I am still having an issue with terminal N15 starter relay error. Battery has been replaced but registered a bit later. Can you please recommend what can be done about it. Thank you!

[@eugenemcardle117]

Will fitting a 'kill switch' to the fuel pump as an added anti theft device to a 2014 BMW 640d cause any unwanted issues. Thanks.

[@nunoseverino973]

Awesome information well done

[@kristineb8235]

Doc please help 😊, i have 2006 e65 750 . It was parked in garage for 10months . Car not recognizing key for comfort access . Need to be insert in to work . All button on remote working. New battery on remote and on the car as well. Remote key was changed two years ago from dealer and everything was good before . Thank you in advance.

[@furryeyelid]

Can I buy replacement relays, pull the old ones out and fit?? If this is the problem, will this work?

[@luiscalderon5552]

Very good video thanks bro :)

[@BMWDoctor]

No problem 👍

[@mikkifreeky]

Thank you Doc for info, i have on my E61 2010 (520d) diagnosed error code :"MPM relay sticking", can you please tell me, is MPM relay located in KGM modul? i found 4 NEC relays in KGM modul, those are in perfect condition, so i think MPM relay is somewhere else

[@floraifauna8530]

he never answer :)

[@TMGEE]

Great job. Well done.

[@larrycoerudy8458]

When ISTA+ says " carry out a terminal change" does it concern unplug and plug one of these ? I'm trying to service function my new valvetronic (n55) but it fails everytime..

[@kevina8524]

Dammit my friend!! If I could bet on one thing today on this 08' 328i ive got from my customer is that any person who knows that they think they know ,, well its just that, think ya know" ....LISTEN TO THIS MAN EVERYBODY CAUSE HE ISNT BLOWIN SMOKE. Any problem before you even go tearing into these rides , watch and listen to the words that come out of a pros mouth.. he just saved again for the 30th time , my time, customers being without their cars and got me on to the next customer.. Thanks again B est M echanic W orldwide... 😁🤘👍

[@mikehowitt481]

Hi bmw doctor...Great informative video 👍 I have a e92 320i..crank no start which was intermittently happening garage cloned and replaced dme as codes indicated that a problem she ran fir a few days...now crank started and died instantly...could this be a ckp sensor or should I look else where..it has had high and low fuel pressure sensor changed and working fine..car wakes up long cranks no start. Appreciate any advice. Cheers

[@josesoto307]

Did you figure it out

[@lindokuhlemandisi8652]

Good explanation 👏

[@c0mm0on]

I swapped my fuse box due to terminal 15 failing whenever it got over 85F, now the new one has no signal to DME but everything else is great. Would you have any suggestions? IF i paid you would you walk me through it remotely?

[@shawnwilkinson1739]

hey good night thanks for the info ws driving and lost power went in the gas station then car won't start many guys came and everyone is lost car park for weeks so will check those in the morning

[@richardvaladez7106]

👏😎🫵informative video! Thanks

[@bumfluff4133]

My cigarette lighters won’t work and I was going to check the fuses by pulling them out and checking them but now you’ve made me afraid to touch them😂

[@airoh11]

If you want to replace the relay. Can you remove terminal 30 relay with the battery still connected? Just wait for sleep mode to engage ?

[@shaunvine2587]

hello can i ask have you had this relay cause canbus issues i am testing one at the moment and the faults keep moving around the car ,abs ,then it clear's up terminal 15 and 30 faults then after checking connections , ok, then i had canbus faults on other modules ,intermittent faults .

[@etongawajiatabi5968]

Hi. Thank you for your informative information. Pls am having a difficulty Bmw e66 730i. The car is not cranking and not starting. The complaint is PT CAN communication fault. Pls help me. Thank you

[@mistsmogguru8378]

Great help Many thanks

[@dragosdima9950]

Nice explinations . thanks

[@ceddy1031]

Hi BMW Dr,. Today after I started the car, my wiper started moving , central lock and trunk, backup camera all malfunction. I noticed that when its a hot sunny day, it goes crazy. When I scanned the car, I got this error "Code 8021D3 Terminal 30F: no reset / shutdown due to error in terminal 30B input" Does it mean I need to replace the RELAY ? After 1 hr , the car went back to normal. What do you think the problem is ? My car is a 2011 F10 535i

[@Felixfixitfelix]

Hey sup bro,I have a 2013 X1 28i xdrive N20 I’m doing a new turbo cause the old one has the RATTLE issues with the waste gate valve, witch scanner can I perform the calibration test for the Wastegate actuator nd the other common reprogramming,like if I need to get new injectors I’ll need to set the flo rate to the dme…

[@gabymaldo2424]

Hey doc,i got a 2005 bmw 525i 5 series and i got a code AOB2 supply, terminal 30E/30L Can't find nothing on the web for this code, do you have any idea??

[@rydgomez2]

I have a similar problem with a 2005 X3. 3.0. If it sits for a few days or more there is no power anywhere. When I hook up jumper cables under the hood still no power. I have jump it directly at the battery. Then I’ll g get lights on the dash. Where should I look. Is this video the same for the x3 ? Thank you from Phoenix Arizona.

[@650nava]

Can that affect all my modules also the driver restraining error

[@ceondecember4995]

I notice tht doing my bleeding on my e90 clutch laying on my back i kept hearing something priming good tip

[@marjori67az]

I park in the garage & in my previous Chevy Malibu, I used to just leave the keys in the vehicle. Should I not do that for my 2012 X3?

[@a2sss5]

E90 2005. Auto trans runs fine on smoth road, but once hit road bumps or hard accelerate gearbox start to fail.. Even on park just heavily acceleration makes P icon on dash blink. Where should I look for problem? I think it should be electrical fault? Maybe some demaged wires or plugs? Please help.

[@gnptravels2540]

I have a 2007 550i V8 that after trying to jump start it (yes properly) I got a crank no start. Checked all fuses, have good fuel pressure and getting spark. It appears my injectors are not activating. Changed the Crankshaft Position Sensor and had my DME tested. Still crank no start. Could these relays be the problem?

[@user-uf6dm6tz2s]

Great info bro

[@Adam.minyan]

Where can I find the Park sensors relay? Bmw 420i F32 model 2014

[@ghassanrached3880]

Hello I’m having a random no start no crank issues with my 135 2008 n54 The car drives great with no faults And till now,happened 3 times ,it won’t turn on. I leave it for 30 minutes, and it’s fires directly. No codes,,battery new,starter changed 2 weeks ago ( had a code on scanner so i changed it) I Tested the grounds,,,all fine. Any idea what to check?

[@ThatGuyTez]

I love you I have the no crank no start and I think this is gonna fix it

[@a.c.ssportulstudentesciasi3365]

Same heRe, fixed It?

[@cristorosales4046]

I have a question I having problems with 1b5202 supply terminal 15n_1: short circuit to ground

[@kellreacts1373]

Please do a video removing the VVT Module. I really need the?

[@ajson1232]

Hey bmw doctor I’ve got that pesky cylinder 6 misfire even after changing everything freeze frame always says it misfire in cold start at around 1000rpm any idea???

[@Sp3ctreWolf]

is there a part number for terminal 15 on a 2011 BMW e93 N55?

At 08:48 you are talking about all different colors of those wires... could you elaborate on this topic in a separate video? Which wire color is which terminal, etc. Thank you!!

[@kamilm4656]

It dosent work like that, it can be different on other cars

[@slimdugger99]

I just ran across your video when I was trying to fix my dead drivers side window. Car was at dealers for new radiator. It took them 30 days to replace and when I got car back(e39 m5), the time and date had to be reset. I’m guessing that they disconnected my battery while it sat there and that has caused the window problem. When I plug in a generic diagnostic tool it says that terminal 30 is off and also that fuse1 on the GM is off. Except for the drivers side window, everything else works perfectly, each individual window works using its own door switch and also using the drivers master switch. Only the drivers window doesn’t operate and I need a logical place to begin.

[@CbrHJ]

Ive got this problem on my e91

[@akacjasturmmand7420]

In one video, it was said that you can turn off the block by 30 so that they could not steal. And by the way, if the remote control does not work, can you close the car with the ignition unit removed?🤔

[@jazzi4431]

Do you know which fuse will cause my interior lights to stay on. For ex my lights turn off and the cluster and I drive but the lights for the shifter and AC and heat are still on all night.

[@JohnDoe-it4kw]

Thanks Man

[@capicapuchino5675]

I have a 2001 BMW Z3 with the M54 Motor I have no clue where that relay is located I know how to check if relay is bad. I am having issue with starter and yes I already checked starter Thanks

[@thethomasj1795]

Great video. On the e63/e64 I am currently getting this fault: 94F2 SZL: Steering wheel heating: heating mat, short-circuit to terminal 30 My Heated steering wheel is not working, and I have 2 different Airbag codes. How does terminal 30 play into this? These issues started right after a battery replacement.

[@stevethompson2566]

Is it that the relays themselves cause the battery drain issue or is it what the relays are powering that is causing the battery drain issue? Is it possible that the terminal relays themselves cause a battery drain?

[@michaelconstantinides1939]

I have a problem on my 330 convertible E93 Passingers seat controllers do not work I can only move the passingers seat while I am in the driving seat but moves the opposite way to the driver seat when the switch is pushed forward or up and down. What could this be?

[@jacobjose2539]

Hi Thank you !!. Could you please let me know where is this T 30 and T 15 relay on 2004 BMW 525i Touring (Europe). I tried to find it on internet, but no success. I am occasionally having no crank, no start and not even the dashboard lights come on when I try to start the car. I was thinking about pulling it off and put it back after checking the connections. Please let me know.

[@williamsugochukwu1146]

Hello.. please did you find the location of the relay?

[@m.r.f8261]

I have been receiving the a559 fault for a long time and my battery is quite dead. I changed it 2 years ago and it shows me 61 and 54ah, it doesn't charge more than 49 or 50 percent. Could it be that they are poor quality batteries or a problem with the ibs? xo.or detect it?? Thank you

[@miltonvarghese9895]

If the vehicle is not started for long period of time and the battery drains up. Can there be an issue of FOB key not detected no lock unlock, no ignition on even after charging battery?