DON'T MISS This Key Step Replacing Garage Door Seals

Looking to add a touch of style and weather protection to your garage door? Then installing vinyl molding is the perfect DIY project for you! In this video, we'll walk you through the entire process, step-by-step, making sure you don't miss a beat.
Remember, measuring twice and cutting once is crucial! We'll emphasize the importance of accurate measurements throughout the video to ensure a professional-looking finished product.
Here's what you'll learn:
Essential tools and materials needed
How to take precise measurements
Cutting techniques for clean edges
Easy installation process
Tips and tricks for a flawless finish
By the end of this video, you'll be confident in tackling your garage door vinyl molding installation like a pro!
Don't forget to like and subscribe for more helpful DIY content!
#garagedoorweatherseal #garagedoorsealreplacement #garagedoor
Visit our website:
sosgdo.com/
Check out our Merch!:
www.dontstress...
Donate to our channel:
paypal.me/sosgdos
Want to send us something?
DM: / sosgds
Best Pricing on Garage Door Parts!
www.expressgar...
As an Amazon Associate I earn from qualifying purchases. Affiliate links below might pay us a commission:
Randall Manufacturing V-37, 7-Feet Dual Vinyl Garage Door Seal for Top or Sides (Almond/Tan)
amzn.to/49YZ9Ha
Randall Manufacturing Co., Inc | Garage Door Weatherstrip Door Seal
amzn.to/3InkNco
Ronan Multi-Cut 401 Cutting Tool
amzn.to/3TiEmZE
DEWALT 20V MAX* Finish Nailer, Angled, 16GA, Tool Only
amzn.to/3uSCWfb
GEAR I USE TO MAKE MY VIDEOS
Sony ZV-1 Camera for Content Creators, Vlogging and KZbin with Flip Screen and Microphone
amzn.to/3mX45oK
Sony ZV-1 Digital Camera with Vlogger Accessory Kit (4 Items)
amzn.to/3aoHa0G
DJI Osmo Action - 4K Action Cam 12MP Digital Camera with 2 Displays 36ft Underwater Waterproof WiFi HDR Video 145° Angle, Black
amzn.to/32E83JP
Manfrotto PIXI Mini Tripod, Black (MTPIXI-B)
amzn.to/2QCbZbb

[@rct8884]

So far this year for my family room I am either going to go with a 85" 900D or a 98" Hisense UX.

[@sosgds]

Thanks for the feedback!

[@AHUMANCORPSE]

I always use painted nails. I tap/preset nails then install as that is so much easier than setting them one by one on the door frame. I never use pvc as it has the tendency to break, especially if you have to remove or readjust, or in you are installing in cold, (although some colors cannot be had in vinyl) I always measure half over on a 16' wide or 18' wide then mark a line, then measure from line over. If need be, tap a brad nail in and run the tape off that. Always install with the door closed.

[@sosgds]

Thanks for the great feedback!

[@RichB0330]

I do my seals with the door down so I'm sure that it's making a good seal. And the vert seals I cut the vinyl on a 45*.

[@theMOTAs95]

Same

[@sosgds]

Thanks for sharing!

[@zulian420]

Literally scrolled down to say the same thing lol. I also do my molding with the door down. And I don't measure. Top piece I just start nailing in from right to left. When I get a couple feet from the end, I make small cuts and dry fit until it's perfect. Same for the verts. Start nailing in from the bottom so it's touching the floor and when I get close to the top, small cuts, dry fit, perfect.

[@sosgds]

Thanks for sharing!