Don't Screw Up Your Car Build. Ep 3 | Wheel Fitment

  Рет қаралды 13,427

MartiniWorks

MartiniWorks

Күн бұрын

Пікірлер
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
Looking for wheels or need help? Let us get you sitting right. Get your car ready for the season with www.martiniworks.com
@SpacedAug
@SpacedAug 9 ай бұрын
This is truly iconic timing. I just slapped +35s onto my E90, and i am now dealing with a wheel arch gap wider than my arm. Coilover time!
@ThruDaLenz
@ThruDaLenz 9 ай бұрын
have fun
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
Let us know if you need some coilovers! www.martiniworks.com
@davconelectric
@davconelectric 9 ай бұрын
+35 ? Width?
@masoncushnie5494
@masoncushnie5494 9 ай бұрын
@@davconelectricoffset
@davconelectric
@davconelectric 9 ай бұрын
@masoncushnie5494 yes I get that, offset means nothing without width.
@ChanoWilliams
@ChanoWilliams 9 ай бұрын
Flush wheel fitment is such drama. lol I had 18x8 +40 wheels, where the front wheels were flush, but the rear wheels were tucked. When I went to test fit Brembo calipers, they didn't clear up front by just a couple of mm. I didn't want to run spacers. Instead I purchased a new set of wheels: 18x8 +35. This time, the front wheels poked, but the rear wheels were nearly flush. After test fitting, the front Brembo calipers cleared the front wheels just fine, but I wound up having technical issues with the whole setup and decided to leave the brakes alone for now. At the moment I'm researching more about brake caliper fitment, which will determine my next wheel setup. Ultimately I'll need two different offsets to get the front AND rear flush. It has been a whirlwind of emotions trying to find something in 5x100 that has multiple offsets and is offered in 19". lol I think I've settled on Japan Racing SL01 wheels, although now I have to see who'll import them from Europe. Anyway, I appreciate the vid!
@davconelectric
@davconelectric 9 ай бұрын
Cool story bro
@ChanoWilliams
@ChanoWilliams 9 ай бұрын
@@davconelectric I'm disappointed this comment didn't arrive under an hour.
@jaron95
@jaron95 9 ай бұрын
God what a nightmare. This keeps me up at night bc I want flush fitment as wide as I can go that will also clear Brembos, but I want a square setup for easy tire rotation and I want to get it right the first time so I'm not wasting time and money on multiple wheel orders 😭
@davconelectric
@davconelectric 9 ай бұрын
@@jaron95 you're wasting time and money not keeping it stock
@FalconPunch1978
@FalconPunch1978 6 ай бұрын
When I was a young and dumb I had a red Nissan Pulsar with t-tops for a few years. I bought a set of 13” Crown wire wheels from some dude down the street. It was a harcore “mexi poke” but I loved my lowrider even though I’m white as a ghost. Those were the days, either playing with the car or trying to nail my gf…
@WELLITS3AM
@WELLITS3AM 9 ай бұрын
I'm trying to make a good daily drive out of my 8th gen accord. My plan is to get a 17-inch enkei performance j10 wheel. I'm confused about what coilover to get for daily drive ability, but get a nice lowered look. I all plan for about 1 to 1 1/2 inch drop.
@adrianbraga-de3ub
@adrianbraga-de3ub 9 ай бұрын
j10 is clapped honestly just get a vors tr4 if youre getting reps they have good offsets
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
Right here is a great option for you! martiniworks.com/products/suspension/coilovers/bc-racing-br-series-coilover-08-12-honda-accord-09-14-acura-tsx/ BC's are a great option for a daily driver that gives the adjustability you're after. If you have any questions or need help just send us a message!
@zaneelliott7538
@zaneelliott7538 9 ай бұрын
Is 16x7 +38 with a 225/45 tire setup perfect for a 5th gen prelude (keeping liners n no rolling)
@BaddDukk
@BaddDukk 9 ай бұрын
The wife's NA Miata runs a mild Poke/Old School fitment with a chrome lip wheel. Anyone who sees it seems to really like the look.
@Econo.rocket
@Econo.rocket 9 ай бұрын
Maybe it's just because I wasn't looking for anything specific in particular, but I got aftermarket wheels the same size as my stock wheels with some Bc coilovers(even on my old racelands) I would say the fitment is almost perfect. I'm just trying to dial in the right height at the moment with the BCs 😂
@buriedinpine
@buriedinpine 9 ай бұрын
I have a '19 Corolla Hatchback (non-GR, I ain't rich). I'm planning on getting some BC Racing Coilovers and a set of 18" wheels (probably Enkei Kojins). I'm looking for a flush fitment, so I'm assuming that I will need wheel spacers too. What is the best way to estimate the what size of wheel spacers will be needed. Loving the content. Thanks!
@aswedishkid2492
@aswedishkid2492 9 ай бұрын
I have a Porsche Cayenne with OEM air suspension. It's nice, however it is really slow both up and down. I don't really care how fast it is up, but I'd like for it to be faster downwards, how can I make that happen? Bigger valves, or something else? Thanks in advance, and keep up the good work with perfectly long and informal videos!
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
Sometimes people make aftermarket solutions to adjust factory OEM air suspension. Typically the size of the air lines controls the speed of airing up and down.
@aswedishkid2492
@aswedishkid2492 9 ай бұрын
@@MartiniWorksOfficial thanks, will research that further! Thanks for response!
@wrexy_vb
@wrexy_vb 9 ай бұрын
what would be my best rim and tire size for a 23 wrx on faction fab fr spec v2(i was looking for flush) scared to spend money cause ik ima mess it up lol
@lowkey.egg14
@lowkey.egg14 9 ай бұрын
great video Alex! Information I wish my 16 year old self knew haha. Learn the hard way though that’s for sure.
@TheRealSkullduggery
@TheRealSkullduggery 9 ай бұрын
Mom said it's my turn to contribute to the algorithm
@inthemakingdk
@inthemakingdk 9 ай бұрын
Speaking of Chattanooga, when are you coming back?
@BelowAboveAverage
@BelowAboveAverage 9 ай бұрын
I want to support and love all my other automotive enthusiasts but the stance stuff makes that difficult. When you objectively make a car worse at being a car, I have this hangup. But I've been trying to see it as art rather than performance, but it's a hard mental switch.
@markbeach8996
@markbeach8996 9 ай бұрын
350z rear tire poke hits different expecially when the front is flush
@indirectkey
@indirectkey 9 ай бұрын
First literally Heya Martini
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
Howdy
@RabidJz
@RabidJz 9 ай бұрын
Hi its me, my dogbox must be getting pretty popular.😂😂
@darrylbrooks851
@darrylbrooks851 8 ай бұрын
good info👍🏼
@mikeceo5351
@mikeceo5351 6 ай бұрын
What ever happened to the fitment industries channel? Just curious😅 Still love your video's Alex, if my country had a better exchange rate, i would buy from you, looking for wheels and tyres for 2012 GT86 at the moment.
@Anonymoose0913
@Anonymoose0913 9 ай бұрын
Alexxxxxx we need a tires video bro
@andymutale368
@andymutale368 9 ай бұрын
Firt time im seeing an avanza on KZbin
@DanielPungky-tf1og
@DanielPungky-tf1og 8 ай бұрын
Try to live in Jakarta city, Indonesia and driving manual car during rush hour. you'll invite the masseus come every day or even hire them 😂
@tankedjackish7592
@tankedjackish7592 9 ай бұрын
2nd, hey guys 👋
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
oh hiiiiiiiiiiiiiiiiiiiiiiii
@tankedjackish7592
@tankedjackish7592 9 ай бұрын
@MartiniWorksOfficial just got my wheels in for my ST, thank y'all for being an easy company to order from 🙏
@ValenThePowerful
@ValenThePowerful 9 ай бұрын
Im a simple man. I see martini works vid I hit like
@MartiniWorksOfficial
@MartiniWorksOfficial 9 ай бұрын
Love you
@WheelieMedia
@WheelieMedia 9 ай бұрын
Can you do how to mod a V6 muscle car.
@Treaxvour
@Treaxvour 9 ай бұрын
Step 1. Sell it and buy a v8.
@jaycalibre609
@jaycalibre609 8 ай бұрын
Haha so funny, nobody has ever said that before ​@@Treaxvour
@dustysgarage5732
@dustysgarage5732 9 ай бұрын
Hey Alex do you have a suggestion for a Mazdaspeed Miata exhaust? I don’t want one too loud but I wanna be able to hear the car. LOVE YOUR CONTENT, KEEP UP THE GOOD WORK!
@chase276
@chase276 9 ай бұрын
Day 8 asking for a how to modify a 4g prelude
@sebastianmorrison6114
@sebastianmorrison6114 9 ай бұрын
But my fitment is pretty good for lowering springs 😢
@Alex-vz2jz
@Alex-vz2jz 9 ай бұрын
Day 15 of asking for: How to Modify a Kei Truck. . . . 🙃
@wjanes11
@wjanes11 5 ай бұрын
So, proper fitment is considered "old-school fitment". Why is it that everything I like makes me feel old. I'm only 36 lol
@pradyumn2453
@pradyumn2453 7 ай бұрын
Gf
@Vvvcx-i9i
@Vvvcx-i9i 9 ай бұрын
8th comment
@bmxregginable
@bmxregginable 9 ай бұрын
Shout-out to my boy @rabidjz In the first clip
Don't Screw Up Your Car Build. Ep 4 | Performance Parts
10:49
MartiniWorks
Рет қаралды 13 М.
Why You Should Lower Your Car
7:34
Fitment Industries
Рет қаралды 376 М.
99.9% IMPOSSIBLE
00:24
STORROR
Рет қаралды 31 МЛН
REAL or FAKE? #beatbox #tiktok
01:03
BeatboxJCOP
Рет қаралды 18 МЛН
Try this prank with your friends 😂 @karina-kola
00:18
Andrey Grechka
Рет қаралды 9 МЛН
Don't Screw Up Your Car Build. Ep 1 Wheels
11:39
MartiniWorks
Рет қаралды 29 М.
BEST Wheels When You're On a Budget!
7:52
Fitment Industries
Рет қаралды 153 М.
New forged products from Konig Wheels | SEMA 2024
7:23
BIG EURO (MrBIGEURO)
Рет қаралды 1 М.
Everything You NEED To Know About Rep Wheels In 20 Minutes
20:00
MartiniWorks
Рет қаралды 25 М.
Don't Screw Up Your Car Build. Ep 2 | Coilovers
9:02
MartiniWorks
Рет қаралды 32 М.
What Wheels Fit a MK5 Volkswagen Golf GTI
7:11
Fitment Industries Garage
Рет қаралды 39 М.
The ULTIMATE BMW F30/F32 SPACER GUIDE For BEST FITMENT!
14:31
Kies Motorsports
Рет қаралды 87 М.
Don't Screw Up Your Car Build. Ep 5 | Air Suspension
7:32
MartiniWorks
Рет қаралды 22 М.
Rookie Mistakes When Making Your Wheels Fit
8:21
Fitment Industries
Рет қаралды 64 М.
You NEED To Hear This Before Buying Air Suspension
20:00
MartiniWorks
Рет қаралды 8 М.