Don't tighten your running belt... Until you watch this video!

Do you think the running belt on your treadmill needs to be tightened? Is it catching or slipping? Does it feel weird when running or walking? Stop what you're doing, and watch this video! Joe the Treadmill Hero shows you what to look for if you're experiencing issues with the running belt.

[@treadheroes]

Hello and thank you for tuning into another Treadmill Heroes video! If you need further assistance, please call our technicians at our sister company, The Fitness Graveyard. Their number is 563-949-0799. If you are looking for parts for your machine, please visit fitnessgraveyard.com. If you are living in the US and are looking for new and used fitness equipment, please visit our website treadhero.com. Thank you! 😄

[@fernandopalacios3786]

Is it easier to take off the center nut or the 4 Allen bolts in order remove the stride select

[@fernandopalacios3786]

0:16

[@greasyclean]

After several hours of tinkering and googling, this has been the *only* comprehensive and straightforward tutorial on this kind of maintenance I could find. The only thing it could have used was a tip on how to know whether you've added too little vs too much lubricant under the belt. Thanks very much!

[@deborascott5757]

This is the most informative treadmill belt adjustment video I have found. Thank you so much.

[@treadheroes]

Glad it was helpful!

[@steffsaint]

Perfect

[@matthewcheney5099]

Got a free treadmill on marketplace and the guy had the back roller completely loosened up on one side trying to “figure out the issue”. A little bit of lube on the tread and deck and opened up to check the drive belt and the motor was loose in the mount and the drive belt could twist almost 360. Thank you for a quick and to the point video that worked perfect!!!

[@empoweredbychrist777]

Most comprehensive yet compact guide to how you can look after your treadmill thanks 🙏🏼

[@sarahpeeters4219]

Yes. This. Thank you for breaking down legit troubleshooting. Just spent an hour trolling through videos and forums for this exact information. 🙌 Clear, concise, and genuinely helped

[@rufus660]

Thank you, Joe, your explanation is crisp and to the point.

[@7steeles]

Super helpful! Thank you for making the effort to become an expert at what you do.

[@Ostnizdasht206]

Best vid I've seen on this issue. Fast and straight to the point. Thanks.

[@johnnywilliams8748]

What a fantastic video, thank you so much for producing it and sharing it with us! I’ll certainly be going to you all for parts and service in the future.

[@lewismwatelanyasimwatela5972]

Followed your advice and successfully got my treadmill up and running..thankyou very much😊

[@knowthebird]

Your video kept me from breaking something and treadmill is working again, thank you!

[@TefCom12]

Bravo Joe, straight to the point info. As a maintenance technician myself, I really appreciate a nicely done video. 👍👍

[@racoonman100]

Treadmill heroes in name and reality it should be treadmill legends!. Thankyou from Perth Western Australia

[@radiofhi]

Thanks for the explanation, particularly on the motor/drive belt assembly. Great video!

[@stephaniecoronado4484]

I was reading the comments thinking I would be the only person this did not work for. I am so thankful for your help. It worked perfectly. I was thinking I was gonna have to dish out so much$$$. Thank you. AMAZING!!!

[@MickyInsegnami]

Great stuff! Clear, short and exhaustive!

[@petermarie1468]

I maintain an industrial cutter, drill and printing presses but I've been too afraid to dig into my slipping treadmill until this morning. Thank you for the informative video (all of them). I'm going to fix my buddy up today!

[@2005jungsuman]

same here just bought new trade mill and its sliipping, and i don't feel it safe to start using it, now i think i can look into it to fix it.

[@user-ws6rz9to3v]

Very precise and clear explanation of how everything works. Good job 👍

[@Swabere]

Thank you!!! I had it completely cranked. You saved me a future headache

[@RedMan9381]

This is good to know keep posting more videos like these it helps a lot

[@markwolfheimer6334]

Joe, I wanted to thank you for saving me from destroying another running belt. I put a new belt on and tightened it up, but it was still slipping. I adjusted the motor location and was able to stop the slipping. Thank you!

[@robgrant8285]

Great info to know as I just bought a treadmill and Im going to get at it.Thankyou for this awesome video,very thorough as well.Cheers!

[@zanic5594]

Thank you so much your video worked for me finally got my treadmill going! 👍

[@TheHolydruid]

Nice information, just bought my first running belt and figured I'd do some reading before putting it to use.

[@d46512]

My treadmill came out of the box tight as a fiddlestring. Backed it off three turns and it works fine.

[@treadheroes]

Glad you were able to remedy the issue. Good deal

[@DistrictFire]

A better preventive maintenance video can’t exist. Very informative!

[@notwrkn2mch]

That was a really good explanation on what to do.... Just purchased a used treadmill and want to be sure it's up to specs....thanx :)

[@heksogen4788]

You can see that the guy know his stuff! Thanks, shame i hadnt seen this video earlier. The treadmill repair guy i've called of course wont tell any of that because he earns repairing this stuff.Glad that you shared your knowledge of the topic.

[@Prxsumo]

So how much did you pay??

[@heksogen4788]

@@Prxsumo $100.

[@Kadeeist]

That’s so helpful and great simple explanation. Im giving away my moms old treadmill she hasn’t used in years and it had been working fine then when I fired it up to check it when giving it away the tread stopped when we stood on it..I lubed it and it got a lot better but still glitching and slowing. Thanks for the other suggestions. There is a senior in need of this tread mill and Im determined to fix it and get it to her.

[@thatoneguyagain0]

Awesome vid and helped me figure out my drive belt on the motor was slipping.

[@StephenSmith-it5zy]

Fantastic explanation! Thank you.

[@JoeTheCheapskate]

This is super helpful. Showing me directionals of the 2 adjustments, as well as the lubrication importance helps. The amount of lubricant that came with my treadmill wasn't even enough to lubricate it once. I ordered some more

[@champspec]

You are incorrect on the lubricant. The lube that came with your treadmill is more than enough to lube your treadmill more than a couple times. If you take advise from other videos on youtube, using FAR more lube than you need to, you will destroy your treadmill.

[@MsQuantification]

Verrry informative! Thank you!! Will check oil before trying to adjust again.

[@HerrDreyer]

After ruining a (rather old) belt, I'm glad I saw this. It will save me from doing the same to the new belt!

[@lewishughes3424]

Bought a second hand reebok treadmill a week ago, £250, I kept sticking and slipping. Tightening the motor belt has stopped it, thanks man!🙌

[@leefont6116]

best video I've seen on this issue. Thank you. I was thinking it was my rollers, belt, treadbelt, or motor. working on a freemotion xtr or its clone the nordictrack c1500, nice to be able to properly diagnose the issue.

[@treadheroes]

Glad we could help! If you ever need to speak with a technician about issues you're having, feel free to give our sister company, Fitness Graveyard, a call at 563-949-0799.

[@mel1daa]

Brother you probably saved my treadmill. Mine was slipping badly and I kept tightening the tread-belt bolts in the back. Saw your vid and although the drive-belt could turn about 90 deg it was off by a thread and not quite seating. I loosened it a bit to move the belt and then tightened it well per your specs and BINGO it no longer slips. Can't thank you enough. I probably would have blown something out with as tight as the back was. Great video!!!

[@shawnszyjka9181]

great video! thank you! I wish I saw this before I tightened my rear roller. About to pop the hood and look at the drive belt!

[@cisur9848]

THANKS YOU FOR THIS INFORMATIVE VIDEO, YOU EXPLAIN A VERY IMPORTANT THINGS ABOUT TREADMILL

[@Come-What-May]

Nicely explained. Much appreciated.

[@kebabimpaler]

Wow yeah totally guilty of over tightening - oops. What a clear explanation of everything thank you!

[@2005jungsuman]

this video helps, and the previous one who said to tighten the belt helps too. it means there is a problem occurring from somewhere we just need to figure out what exactly it is ,before starting to fix it from every possible way.

[@matthewbogue9283]

Very much appreciated! Great tutorial!

[@mihneabulzan432]

amazing video , thank you verry much all the way from Romania ! God bless yall

[@romanbeastmodehankins9642]

I really don’t like to put comments but I had to put one This video really answer all my questions that I had about my treadmill

[@theresafilm4489]

Excellent video, Sir!

[@jimo4350]

Very good and knowledgeable video. Thanks

[@audi_kid]

Thank you so much for This video!!!! I was so close to adjusting the roller but it needed Lube 😆 thank you so much!!! Watched 2022 🤘🏼

[@krissycovey3289]

Lots of helpful advice Thank You so much 😁

[@wojvera]

Hello! Thank you very much! Greetings from Europa, Hungary!!! Perfect video!!!

[@michelerussell188]

Excellent video, thx so much for the detailed instruction!

[@donvape336]

I have had my E2500 for like 20 years. It has never been lubricated. I lubed it. It's smooth now. Still need to go under the hood. I had no idea how to tell if its over tight. Your the best. V

[@dporrasxtremeLS3]

This video is Super Helpful! Thanks

[@imeldacitrowski]

Wow. This is great news. This Information is very helpful. Thank You!!

[@marcelinomarmolejo4876]

Thanks for the big help am gonna start working on mine tomorrow

[@davedavies6518]

Great job on the video. I lubricated my belt as per the instructions on the treadmill lube box. Then I taken off the motor cover and vacuumed all the dust and stuff out. With the cover off I used the tread mill and it was still slipping. While I held the handles I pushed down on the belt while I was walking on it. I found the running belt would slip on the roller and the drive belt was good. I never have adjusted the tension on the running belt, but it looks good. I can only get my hand half way under the belt. I may give it a little time for the lube to soak into the belt and if it still slips maybe try another tube of lubricate?

[@duifuinator]

You are the best. The explanation was so clear and I feel like so much less of an idiot trying to fix this thing haha thanks a bunch

[@treadheroes]

Thank you!! Positive Vibes are always appreciated

[@jaymontecalvo6315]

Thank you. My treadmill needed a hero.

[@jasonlenihan9854]

Great video, thanks

[@cormond]

Fantastic video, Thanks!

[@katesmiles4208]

Great info and explanations. Thanks

[@treadheroes]

My pleasure!

[@dazwud]

Thanks for the video! Mine was the drive belt, not the rollers, just as you suggested 👍🏼

[@treadheroes]

Glad it helped!

[@jimwu1182]

i guess mine is drive bell， so even i am not step in, but just turn on , I can hear noise in the front of tread. I will try to open

[@nof8kn]

Great info, Sir. Thank you

[@sandradummer4726]

Thank you for the info.

[@bobchase1441]

Some things he didn't mention. I've been in the repair business for 17 years. 1/2 oz of lubricant every 2 - 3 months of use is a good amount. Over lubrication causes slipping. I've had customer's putting 1 oz or more on and it leaches into the top of the walking belt. It also squeezes out a mist into the motor cavity as it goes around the front roller. The air current from the motor fan will mist lube into your motor belt. At this point you will need to take motor belt out and soak the motor belt in dishwashing soap and water,dry and make sure both pulleys are cleaned of all lube. Paper towel with the dishwashing solution helps. If your walking belt absorbed too much lube you may have to replace it too as you may repeat your problem. Do not put lube on like motor oil. A thin glaze is good. One other thing to note is the motor belt wears out at some time and that causes slipping no matter how tight your motor belt is. The teeth on your pulleys are 60 degrees approximately so a lot of your power comes from the edges of the grooves. When the grooves wear wider or you can see the nylon cord in the bottom of the grooves or sections of the motor belt broken out its time for a new motor belt. One last thing. Lube is most important in the area you use, not so much the 2" outside edges where you could accumulate an excess over time.

[@BigLapper]

This is a fantastic addition. Thank you so much for commenting and mentioning this. I really appreciate it

[@rizuwan1244]

kzbin.infogZorSns-XQo?feature=share

[@rizuwan1244]

can u see my treadmill, slipyy...

[@bobchase1441]

@@rizuwan1244 without being there it's possible the motor belt needs replacing. Check the grooves to see if they are worn out

[@petersack5074]

Hi, am wondering if graphite, would perhaps, be a better lube ...??

[@peter-jason5298]

saved me a lot of frustration, Thank you;)

[@chrisconstantine8521]

Great video!

[@sefamoa7877]

Wow really great review. Thank you.

[@ceasarchan9821]

Thank you for your videos

[@ddugan]

Super helpful thank you!

[@traderj1876]

Thank you. Very Informative video. I'm now a subscriber.

[@kellycoombs8867]

It was my drive belt! Thank you so much your expertise. I’m so glad I watched your video BEFORE I started messing with the running belt! I just wish you had explained further as to how to do that. Also how do you know how much lube is needed?

[@harmonygibbs7904]

Thank you for a great video.

[@marklorden1]

Great video! Thanks!

[@ClayBlasdel44]

you have the best info I have seen. My main belt stops suddenly. I have lubed it. Maybe not enuf or maybe I'm too heavy (300lbs+)

[@ryeweskey]

Nice, was oiling the treadbelt with the factory lubricant and already had the hood off to clean out the dust with an air can and vaccuum. Checked the belt since it's right there. I'd say it goes more than 45° but not near 90° should be good. Thanks for the info.

[@vajraheart6052]

Great tips. 🙏

[@treadheroes]

Glad it was helpful!

[@iatatekin]

Great video....Thank you.

[@UberBman]

Glad I found your video. I’m going to check the drive belt. But, I’ve lubricated my treadmill and cleaned it regularly but for some reason it gets out of alignment. I can adjust the belt to where it’s centered but once I step on to it it begins to drift to one side or another. Also depending on the speed, I can think it’s adjusted correctly but once I get up to running speed the belt will begin to rub the motor casing. Any ideas what I’m doing wrong?

[@cearacarrier4154]

Thank you!!! I have spent hours trying to fix this problem and would get it to run for a couple days then it would catch again.

[@doogiehowser78]

excellent advise

[@ptyler74]

Thanks Joe for the information. Really informative video. Please show me where I can adjust the motor to tighten the dry belt.

[@treadheroes]

You can always give our company, Fitness Graveyard, a call at 563-949-0799. They can help answer any questions you may have. Thanks!

[@lodi888]

Really thanks bro u explained all what's going on with my proform treadmill how do u. Adjust the motor .

[@treadheroes]

Hi Tee Man, Please give our technicians over at the Fitness Graveyard a call. Their number is 563-949-0369. Thanks!

[@rob8761]

Cheers very helpful

[@Nishijin1975]

🖖🎃THANK YOU for the video! It was GREATLY appreciated!

[@SeanBaker]

Very informative!

[@LesSummer]

Thanks!!

[@dosiodosev740]

Very cool, thank you

[@Just.N20]

Best one so far.

[@MickyInsegnami]

Good stuff! 🎉

[@kewebco]

Fanfreakingtastic! I've watched about 4 lube vids. All just a few minutes and all good. This vid added another element and also a quick catch. I'm helping a friend with her treadmill as its years old and (forever un-maintenanced and way past the warranty). Its her one exercise obsession that she uses everyday. She did not want to pay for out-of-warranty maintenance/repair cost, so she contacted me. Now that I know, I will pop the motor cover and inspect, determine and maintenance, or suggest her next step. You da man! (Can't believe how you just cut that well maintained runner. But hey, you know- I don't. I ain't gettin it twisted, ok? :-) 😁

[@daveladd7046]

Awesome - thank you...very nice Job..

[@Tinker_Balambao]

Wow, huh. I am using a treadmill that had 0 maintenance done on it for years before I started using it. So I am trying to solve a creaking noise... I lubed the belt for the first time in its life... just cleaned out around the motor housing.. cat hair and belt shavings.. Thinking it is just an unevenly tightened running belt. 🤔 Going to check the drive belt now.. the treadmill does slip.. but the running belt seems plenty snug. Thx, this will make my gaming experience a little safer. 🤣

[@dalesmith7777]

Thanks for the info! .....

[@jezmez68]

Fantastic!

[@cerir4033]

that is exactly the issue, I have noise when I run the treadmill (Superfit), that sounds like a wheel turning, louder when I walk on it. Occasionally it feels "bumpy". I've wondered if I over lubricated it, but I'm not certain that tightening the belt is the issue. Two people I know who talk of having done that said what ever the problem was, they made it worse adjusting the tension on the belt. I hoped to find some videos that demonstrated what noises mean, the belt looks straight, but becoming loud enough to be annoying and causing some concern of more damage happening, sounds like it is making noise at both rollers. I guess I have to make the space and get up the nerve to try to open the motor area... great video, thank you

[@naqashhaider3469]

Thanks a lot.

[@kourtneytschirhart1234]

Wow thank you soo much!!

[@curtisjohnson944]

Thanks man.