Dongles, all about Dongles - Connect your alarms to ND

These systems allow other brand alarms to interface with the products of ND Tackle
(Smartband, H9PRO etc). Our innovative products are just too good to be limited to only our range so the dongles have been designed to act as an interface linking any product with a 2.5mm or 3.5mm jack port.

[@SouthWestCarpHunter]

Just ordered a set of these for my delkim standard plus alarms. Such a neater job than others out there and half the price. Great product nd 👍🏻

[@Fidelgasflo]

How did you get on with them pal? I’m looking to buy some for my EV+ and just curious how they pair

[@SouthWestCarpHunter]

@@Fidelgasflo they are good. They do the job. They don’t give the delkim tones but defo worth the investment

[@petercollins647]

What is the range on them m8?

[@SouthWestCarpHunter]

@@petercollins647 I used that to around 20 yards with no issues

[@UpTheBlues1997]

Sounds like a they do as they say on the box. I fish pretty close anyway and no wonder off due to a lot of snag fishing but just some security at night incase you crash

[@carpingchris61]

Great product well done on your release

[@MrDragan21]

Hello, will the dongles work with Gardners ATT base? Thanks Dragan

[@nathankerin8344]

Looks like you can't used delkim snag ears with this set up.. just a heads up

[@allencooke8925]

I have some Bitech Viper Micro alarms with 3.5mm sockets circa 1994. Looking for a dongle system will these be suitable?

[@domenicocusano4287]

What is the range of this reciver?

[@zackmajer1733]

are they any good ???

[@Michael-jd2li]

Can I use them with prologic bat+ ?

[@UpTheBlues1997]

My Delkim battery cover has the snag ears on the back of them. Take it I would have to find new snag ears when using these?

[@markfosterangling338]

Hi Harry If you have the Delkim D with the Snags on the cover the ND dongles are not compatible. They fit the standard alarms or the EV plus

[@UpTheBlues1997]

@@markfosterangling338 Hi Mark! Yeah I currently have the EV Plus alarms and been looking for a product like this. The snag ears fit on the back plate over the battery (which you have to swap out) so I take it I have to take the back off again to then put these on. Minor flaw but better to have the options and very cheap too

[@markfosterangling338]

@@UpTheBlues1997 if you have the EV they will fit. It replaces the original cover that the Snags are attached to so you would need to purchase different Snags that attach to the screw section at screws into the bank sticks. ND do these aswell

[@stevenbonnington9027]

How does this work with the older k9 alarms ? I already have the rechargeable battery’s on them

[@ndtackle]

Not very well. The problem is that the K9 gives for 10 seconds power on the 2.5mm socket after a bite indication. This means a single beep will be a 10 second run on the S9r receiver. However, the headtorch or new bivvylight would work with the dongles and the K9 bite alarm.

[@simondavies5578]

Do they work with the new fox mini micron alarms?

[@ndtackle]

The mini microns do have a 2.5mm port so in theory yes. But won't make sense to use our receivers because usually the sockets are programmed to give voltage on the socket for 10 seconds or so at a single bite indication. Would mean a 10 second run on our receivers. However it will work fine with our bivvy light and head torch.

[@paulhigham6047]

Do these fit the newer delkim alarms... The Delkim EV D alarms?

[@mikenorth1999]

Did you ever get an answer to this bud as I'm in the same situation

[@arnelippmann5390]

No, doesnt work

[@markeardley6836]

Is there a single dongle available? ie.. I have x2 + receiver already... but now require a 3rd! Hours searching and cant find anything other than the x2 dongle set plus receiver.. surely singles are available! Please help 😭😁

[@p9974]

Amazon

[@MrGooseberry86]

#newdirection

[@bushmanuk100]

Are these capable of connecting to the new delkim ev-d alarms thanks

[@adamaldred8623]

The new delkims do not have the socket for dongles :(