Links for the products in the video: AirLift 88388 LoadLifter 5000 for AT4 & TrailBoss : amzn.to/3wZnIQy Air Lift 25980EZ WirelessONE Compressor : amzn.to/3y09CzI linktr.ee/donslife - Links to all of my products and discounts
@Donslife3 жыл бұрын
A full towing review will be coming soon!!
@caseyheberling18242 ай бұрын
Don - Thank you so much for making this video! I am going to be adding this Air Lift 25980EZ WirelessOne / EZ Mount and the Loadlifter 5000 Ultimate Air Springs to my 2018 Chevy Silverado. But I have some questions and hope you can provide some insights. I live in Montana and we do have wet / snow / cold etc. that would not be ideal for a frame mount. I do have the secondary battery spot on the drivers side under the engine compartment hood as you mentioned in this video and would love to place the compressor there since I don't have the awesome spot / space you have installed yours on your AT4 by the battery on the passenger side. Based on the recommendations for orientation installation, can I install the EZ Mount compressor in a face up configuration with the logo on top ( like you see it on the template copy) and orientate it on the battery tray to closely match the length / width of the compressor mount. It would be a fantastic OEM spot to use on my truck. Let me know your thoughts and recommendations. Thanks!
@Donslife2 ай бұрын
I think that location would be just fine!
@caseyheberling18242 ай бұрын
@@Donslife ... Thanks for the reply! I enjoy your videos and all of the cool and practical options you have installed on your AT4. Looking forward to your future videos. Have a great weekend!
@johnv76763 ай бұрын
Question, when you fuse tapped into you engine fuse box, what fuse location did you use for the ignition on off?
@Donslife3 ай бұрын
I used the fuse panel in the cab on the passenger side. Fuse #20 I think. Cooled seat circuit
@elinkieto10004 ай бұрын
I have a 4 inch lift in my truck will this work or do I need extra parts?
@Donslife4 ай бұрын
You’ll probably need a slightly different kit. Best to consult the manufacturer directly for guidance
@claytontycksen9472 Жыл бұрын
Did you have to relocate the horns? In my 2021 Sierra 3500 AT4 the horns are located in that spot. 4:05
@Donslife Жыл бұрын
No in the 1500’s they are by the front radiator
@ndeeeed8 ай бұрын
How is it holding up after a couple years?
@Donslife8 ай бұрын
Great. No issues. Even in the cold
@georgemargerum9248 Жыл бұрын
Important: No one told me I had to lift the front end at least 2.5 inches at the lower strut or 3 inches at the top as I ended up doing. I'm running pressure at 22 lbs to level my truck. if I had used maybe a 2.5-inch lift I could balance truck level at 10 lbs. Forget about 5 lbs riding without weight. my truck 2008 Sierra 1500 4 wd 4.8 crew cab short box. make sure the lines are equal in length if you are running dual lines. or the one side pumps up faster with the shortest line. coil it up if it's extra, make them equal lentgh good suggestion. Best to yous
@coreyandashleysumma26673 жыл бұрын
Slow down Don, you’re going to have a whole new truck before I even get mine 😂
@Donslife3 жыл бұрын
I can’t do it 😂
@5thGenNativeTexan Жыл бұрын
I opted to go with the Air Lift WirelessOne system. It's been fantastic. I keep the dedicated remote in the console, but I probably almost exclusively use the Air Lift app on my phone. Incredibly fast and convenient.
@Donslife Жыл бұрын
Mine has been very reliable - no issues
@kimhap4338 Жыл бұрын
I have second gen at4 1500 2023 , The original suspensions is rough to ride. Does this air suspension make the ride smoother ?
@dempseydoodles Жыл бұрын
Totally wicked bro! Disregard my last message on your Aux Beam controller install video where I asked you if you can, or if you made a video. I have a 2018 GMC Sierra Denali and I’d love to put a bag system/sir compressor. I do tow a tri-axle gooseneck dump trailer so i feel like this would work well with my application (plus I’d love to have on board air when we go to the lake and I gotta inflate all the kids tubes lol).
@bmejakester4 ай бұрын
Thanks for the video, installed mine this weekend on my AT4 diesel. Your videos have been amazing education for my 2022, keep up the great work. Could you share which 10A ignition fuse you used to tap into?
@Donslife4 ай бұрын
I used my cooled seats
@brandon.buchanan812 жыл бұрын
Very clean install. Nice work! I did something similar to this on my F150 years ago. Now I am getting ready to attempt an install of this unit on my F350. Got to find the room somewhere to keep it out of the weather
@Donslife2 жыл бұрын
Thank you. It’s been working well
@suncityyuyu11 ай бұрын
Now you can tow that beautiful 56 cameo that you have next to the at4 great video and clean set up , thanks for the info I’ll add it to my Sierra🍻
@KrafftyMan Жыл бұрын
Did the same location on my 2022 today. The bolts in the box were not long enough due to it not being totally flat in there. I bought a couple longer bolts and a couple rubber bushings to go between the compressor plate and the truck. It’s got just a bit of wiggle to it now. I’ll check it after a couple drives to ensure nothing is loosening up. I think I saw some spacers on your setup. How’s it holding up?
@DarkenFool11 ай бұрын
I put a on off switch inside the cab for this. Didn't want it to drain the battery maintaining the minimum air requirement. Do you find the compressor turns on randomly just to re-pressurize?
@Donslife11 ай бұрын
It can but I set up the remote turn on with a switched ignition source. Fast forward till now and I have a switch system in place
@CatterlinRanch Жыл бұрын
I’m going to install my wireless One in the same spot on my 2020 3500 Z71. That area looks even smaller in person! 🥴
@Donslife Жыл бұрын
It’s a. Challenge!
@harryash11Ай бұрын
I got this exact setup 3 weeks ago.....wow, it's awesome. Love it! Great vid dude!
@DonslifeАй бұрын
Awesome! Thank you!
@Thesheriff17763 жыл бұрын
It’d be cool if you could use this to air up your tires. Any possibility of that?
@Donslife3 жыл бұрын
Yes! A couple ways actually. You could hook up an auxiliary line with a shut off for the air bags that would redirect the air to a fill line for your wheels. Or you could install a tank using a similar idea. I will probably put a shut off bypass for bags and a quick connect for an auxiliary line to fill tires.
@JLeosnow14 ай бұрын
Thanks for the video Don, much appreciated! Question on the pink reigger wire, did ypu ever find a proper "ignition switched " fuse/circut to tap into? Im having a heck of a time finding one under the hood that only comes on with the ignition... Thanks for any info on this. BTW: Your tutorial/video was VERy informative while I installed this set up on my 24 Denali 1500!
@Donslife4 ай бұрын
Mine is connected to my cooled seat fuse. The main power wire still needs to be connected. From the installation manual: Connect the pink wire to any wire that is active when the ignition is on. This will allow WirelessONE to make adjustments as soon as the ignition is turned on. Otherwise, the system will only activate when the vehicle moves or when woken up by the controller or mobile app. Hardware to connect to the ignition is not included. This is a low-amperage circuit that should be connected to the output side of a 10A or smaller fuse-protected circuit.
@JLeosnow14 ай бұрын
Thank you!@@Donslife
@michaeldlacross1146 Жыл бұрын
On your Install of the compressor - even though you predrilled your holes. What size bolts did you use to secure it to the frame?? Thanks Great Video. Can't wait to install mine!!
@Donslife Жыл бұрын
I think they we 1/2" self tapping. I made the hole a little smaller than the bolts I used so they would bite well. They have never worked themselves loose either.
@brainsouffle Жыл бұрын
I was here to see the step by step of the electrical install, as I am ignorant on that. Then you skipped right through it. Otherwise helpful video.
@Donslife Жыл бұрын
Sorry about that
@robertrambert41722 жыл бұрын
Let me ask you I have a 2002 Gmc Yukon Denali and I have air shocks can I just hook the system to the air shocks and use it.
@Donslife2 жыл бұрын
I don’t think I would recommend adding this to your existing Air suspension. I think your existing sensors would send fault codes when the new gear is introduced. We have a 2022 Escalade with 4 wheel air ride and I wouldn’t change it
@BrianFox-m4w Жыл бұрын
Can you elaborate on where you made up the connection, mounted the switch, etc? Thanks for all the great content. "I also have the pink wire connected to an ignition source so the compressor will only come on in specific situations when the vehicle is off. I am wiring the compressor up to a switch this week too just to avoid a dead battery if a line blew when the truck is unattended."
@Donslife Жыл бұрын
I connected the positive and negative to my Auxbeam AR-800 switch. The remote wire is tapped to my cooled seat fuse
@Lerchcon3 жыл бұрын
Interesting note. When you scroll through videos on KZbin (iPhone KZbin) if you leave at the top of screen it auto plays the thumbnails. KZbin says “welcome to Dawns life” in the closed captions Good work brother.
@Donslife3 жыл бұрын
A.I. isn’t so smart I guess 🤔
@shawncarrell85282 жыл бұрын
Thinks for the Video and idea of were to install my system in my 2019 Chevy. Because I did not like the under the frame do to the weather. Once thanks again for the video and idea.
@Donslife2 жыл бұрын
Cool. Just realize the length of the lines impacts fill times
@eloyvaldez49212 жыл бұрын
By any chance you got the actual dimensions im installing on a 2021 gmc 2500
@Donslife2 жыл бұрын
I just measured it for you. It was difficult to be precise since everything is mounted. The wireless compressor with the steel cage is 10.5-11” in length. 6” wide and 6” high.
@eloyvaldez49212 жыл бұрын
Thank you
@CowtownJames6 ай бұрын
Just found your videos....Good Job...I'm fixing to install this same system on my 2021 GMC Sierra 1500 Elevation X31.....When you bolted the unit in there did you use bolts od self tapping screws
@Donslife6 ай бұрын
1/2” self tapping bolts with a hex head.
@Donslife6 ай бұрын
Maybe 3/8”. It has been awhile 😂
@CowtownJames6 ай бұрын
@@DonslifeThanks
@cruzrodriguez6398 Жыл бұрын
12 v?
@Donslife Жыл бұрын
Yes 12 volt
@leeolmstead6288 Жыл бұрын
Does installing this Air Lift VOID the Warranty?
@Donslife Жыл бұрын
In my opinion…Nope
@GabrielLujano2 жыл бұрын
What are the chances of you doing a video on how to to use the using the same air compressor and adding and aux air tank? Could come in handyFor airing up tires running air tools and my maybe a train horn lol
@Donslife2 жыл бұрын
I have always had the idea too, but not sure if I will do that install anytime soon. Never say never
@rogeliogonzales473111 ай бұрын
I’m in northern Wisconsin, so I was just wonder if you’ve heard of the supplied air lines freezing in below zero temperatures? Thank you for your time.
@Donslife11 ай бұрын
I am in Saskatoon where it gets colder than Wisconsin. I park outside year round too and I haven’t had a problem with the supplied lines.
@rogeliogonzales473111 ай бұрын
Perfect! Thank you for the response.
@jasonclark625 Жыл бұрын
Hey don. Love the videos man. Was wanting to install my compressor like u did. I have a 2021 Chevy 2500. Was wondering if u rerouted the horn on yours? Looks like my horn is in that spot on the Chevy. I should be able to move the horn maybe but was wondering if u did the same. Another thing I was hoping u could help me on is, did u drill all the way through to get nuts and bolts on the compressor or did u just use screws? I just ordered bags and compressor so I’m not sure what comes with the compressor
@Donslife Жыл бұрын
Hey Jason! I was lucky on the 1500 that the horn is in a different location. I used some coarse thread self tapping bolts to grab the metal, no need to drill all the way through. Everything is working flawlessly still since the install
@jasonclark625 Жыл бұрын
Thank u on the quick response. Keep up the great work man. Much appreciated
@michaeldlacross1146 Жыл бұрын
On your Install
@NateLugo3 жыл бұрын
I'm looking at the same setup. Since I put 2" add a leafs on my SLT, do you think I should get the bags for AT4? Seems logical to me.
@Donslife3 жыл бұрын
I had a set of bags on my Sierra Denali prior to this truck and never regretted it for a second.
@brandonbray2857 Жыл бұрын
Hey don I just wanted to tell you that you are a huge inspiration to me I have a 22 LTZ I’ve watched a ton of your videos!!!Today I installed my airlift bags and compressor and I tried to mount the compressor like you did but I couldn’t get my hands in there to get the bolts started that was really hard you are a bad ass haha any way so I mounted it on the frame not ideal location but it came out super clean so anyway thanks man appreciate you!!!!!
@Donslife Жыл бұрын
Thank you for being so kind. I make the videos for people like you 🍻
@MrRedwolf19783 жыл бұрын
Interesting, my air lift remote looks different. Is this the single path version?
@Donslife3 жыл бұрын
Yes I chose single path as it is all I need
@garrettpayment9982 жыл бұрын
What compressor model is that, I have manual fill bags independent fill per side, wanting to install onboard air like yours with a tiny tank hidden in my tool box for filling tires.
@Donslife2 жыл бұрын
Hey there! I had independent bags in my last truck too! The model info in near the top of the video description for you.
@garrettpayment9982 жыл бұрын
@@Donslife your last truck was the 2019 at4 right? Do you know if there is any difference between the sle in terms of engine bay room? I have airlift 5000 bags with internal bump stop and wanted to do the install under the hood for a compressor but the shop said impossible lol I live in Winnipeg and 1 snow fall will trash that compressor if frame mounted.
@maxbrosig8366 Жыл бұрын
I put a 2 in leveling kit on my 2016 sierra, 4 door, 5.5 bed. It is level but any weight tilts the truck back. Worse when I tow my tractor, horse trailer or snowmobile in the bed. Will the kit level my truck with no load?
@RyanDoty-fc8dk4 ай бұрын
what's the name of the long drill bit attachment please?
@Donslife4 ай бұрын
I don't know the brand but this is what it is: amzn.to/44yC5hd
@brett18092 жыл бұрын
Don, you seriously show me how to do everything I want to on my AT4, thank you for the clear videos! I’m mounting a dual path compressor and it fits where you did yours but it’s tight. I also find it doesn’t flush mount due to the bends and welds on the beam you’re mounting it to. Did you find your compressor isn’t flush, or did you some metal shaping in the compartment?
@Donslife2 жыл бұрын
Hey! You can email me (in video description) or DM on Instagram. I can send you a picture
@nickpapa69552 жыл бұрын
What kind of tires do you have? Do you use tire spacers?
@Donslife2 жыл бұрын
Factory 18” Duratracs with 1.5” spacers
@viciomaple2 жыл бұрын
It can be used in four wheels at same time?, or u need two kits?
@Donslife2 жыл бұрын
This one is meant for two rear bags. Usually a 4 corner setup, you’d want a tank added as well
@72olds455 Жыл бұрын
The compressor sounds sorta loud on camera, is it that loud in person?
@Donslife Жыл бұрын
Yes it is the standard loudness for a compressor this size.
@drakemath2 жыл бұрын
What did you bolt it too or use to fasten the mounts in the holes you drilled
@Donslife2 жыл бұрын
Large self tapping bolts. I predrilled holes a little smaller than the bolts and the large coarse threads of the bolts did the rest
@jasonbrier99577 ай бұрын
Did you wire key on only yet? Im looking for the correct fuse for that
@Donslife7 ай бұрын
I did and used my cooled seats circuit.
@jasonbrier99577 ай бұрын
I used my headlights Still runs with key off
@Dmac6969 Жыл бұрын
It would be sweet if they made a rubber bag with quick coupler air fittings so that you could have a temporary air tank that could easily be stored under the back seat
@Donslife Жыл бұрын
I bought an auxiliary airtank but I might need to upgrade the compressor since it would take 3-4 mins to fill with this one
@Dmac6969 Жыл бұрын
@@Donslife ahh gotcha. I think it's perfect for a emergency situation out in the bush! Just getting to the aux tank video now haha
@bobbyhenry48992 жыл бұрын
Where did you get the long extension to drill the hole from ?
@Donslife2 жыл бұрын
A local retailer (Canada) called Princess Auto. Kind of like Harbor Freight in the US I think
@Livefreewhileucan5 ай бұрын
You do an excellent job on these videos sir.
@Donslife5 ай бұрын
Thank you very much!
@michaelcarlson6863 Жыл бұрын
What system did you install?
@Donslife Жыл бұрын
This one was an Air Lift 5000
@ashleytowson98212 жыл бұрын
what kind of airbags did you use sir
@Donslife2 жыл бұрын
For this install, Air Lift
@selfbuilfab Жыл бұрын
Great videos! Where did you tap into ignition for the compressor?
@Donslife Жыл бұрын
I wired the accessory turn on to my cooled seats circuit in the fuse panel (in the cab) on the passenger side.
@Donslife Жыл бұрын
I have also added a wireless remote turn on as well : kzbin.info/www/bejne/l4ealqxraZZomqs
@thawk72233 жыл бұрын
Can you add this to a 2019 dodge ram
@Donslife3 жыл бұрын
Yes but it will be a different part number
@pjohnson08188 ай бұрын
Can you ever turn this system completely off?
@Donslife8 ай бұрын
Yes
@vaneshiadixon3 ай бұрын
How
@jimsymborski908110 ай бұрын
What is the benefit for that extra wire for the ignition?
@Donslife10 ай бұрын
So it doesn’t power itself up if it senses a drop in minimum pressure. If you had a faulty line it would eventually kill your battery if you weren’t there to observe what was happening
@jimsymborski908110 ай бұрын
Aww , understood. I ordered one and hopefully it will be here soon. Do you have a video on wiring that one wire? @@Donslife
@samasenter2 жыл бұрын
Any reason you didn't mount it under the bed? Seems like there's a lot of room under there. Going to be doing something similar on my 2018 Dually. Is there any way for the compressor to be installed so it can work double duty for tires and such? I guess it would work it hard since there's no tank.
@Donslife2 жыл бұрын
You can mount under the bed for sure. My climate and weather it would be rusted and worn out after one winter. I did add an auxiliary fill line and you can use the bags as a tiny tank. I could add a tank anytime and I might. Check out the video: kzbin.info/www/bejne/iJnUpHxqg6hlqLc
@samasenter2 жыл бұрын
@@Donslife I saw your other video right after I asked the question. That's a clean install. Have you found it sufficient for tire maintenance. My only fear is high pressure. The trailer I'm towing maxes at 110psi
@Donslife2 жыл бұрын
@@samasenter you would need a tank for sure for something like that
@samasenter2 жыл бұрын
@@Donslife I wonder if it would make more sense in stall the bags with a manual fill only.. then a separate, higher capacity on-board air system. Just thinking out loud.
@eyemanm60452 жыл бұрын
amazing....seems expensive
@Donslife2 жыл бұрын
Going wireless is a little more expensive, yes. I feel it is a reasonable cost for the benefit
@michaelkirk39762 жыл бұрын
I installed the same system a few weeks ago and your video influenced me to install install the compressor in the engine area. I like the idea of keeping it out of the weather. Recently the unit has been acting up and I'm speculating that it is getting too hot for it in the engine area. After the engine is on for a little while (maybe over 10 minutes) the unit becomes unresponsive. Have you experienced any issues like this?
@Donslife2 жыл бұрын
I haven't experienced that at all. How long is the compressor running? Mine will only kick in when I adjust my bags between 5-10 lbs. The odd time when cold, the air pressure drops and the system tops up to the minimum 5lbs. I also have the pink wire connected to an ignition source so the compressor will only come on in specific situations when the vehicle is off. I am wiring the compressor up to a switch this week too just to avoid a dead battery if a line blew when the truck is unattended.
@ffdoingwork7845 Жыл бұрын
I know this comment was a year ago but @michaelkirk did you find the issue?
@wipatriot5103 жыл бұрын
Living in the climate that you do, and knowing that you can have some colder weather, one thing you have to watch for is water(condensation) in the air lines, it can freeze leaving your system inoperable and quite possibly damaging air lines and other components...
@Donslife3 жыл бұрын
Very true. I had a pair of compressors and a 4 bag system on a lowrider back in the day I had to keep an eye on. Thanks for lookin’ out
@NateLugo3 жыл бұрын
@@Donslife maybe you can put an added water separator to keep moisture out of the lions. Similar to any other air compressor.
@Donslife3 жыл бұрын
True, I could do that, or worst case pull the compressor for the winter and use the schrader valve and manually fill. I don’t really tow anything when it is winter here
@americantoylife8 ай бұрын
Too many AD
@Donslife8 ай бұрын
KZbin puts ads in the videos automatically
@yourunclefab2 ай бұрын
Great vid! This void warranty's?
@Donslife2 ай бұрын
It didn’t void mine. GM service techs liked the idea and the integration
@yourunclefab2 ай бұрын
@@Donslife super cool integration. I got the regular kit tho, not sure it will all fit in the same spot. Thanks!
@yourunclefab2 ай бұрын
@@Donslife you happen to have footage from when you tapped the ignition hot wire? Was it from the panel under the hood?
@justinperkins8642 жыл бұрын
Hey Don, Question for you as it was hard to tell in the video, when you bolted the Compressor were you able to get a nut on the opposite side of the metal, if so do you have any tips as its a tight space, if not, what type of fastener did you use to ensure it doesnt vibrate loose over time. Thanks in advance.
@Donslife2 жыл бұрын
Hi Justin, I used self tapping bolts a little larger than the predrilled holes I made. I also added lock washers. Zero issues, and nice and snug. The compressor is mounted with rubber bushings too inside the brackets.
@justinperkins8642 жыл бұрын
@@Donslife Thank you for the info I truely appreciate it. One more question if you happen to know. I am using a Viair comressor and it fits in that same spot, but it seems a bit heavy. Do you know roughly how much weight can safely be bolted to the metal there? The compressor and mount combined are roughly 10-15 lbs. Thanks again.
@Donslife2 жыл бұрын
@@justinperkins864 no worries. My unit with the mount is 10lbs. You should be good up to 15. You could always switch to nuts and bolts 🔩 vs the self tapping bolts w/lock wahsers like me.
@kazuha3149 Жыл бұрын
Would this work for a car
@Donslife Жыл бұрын
Yes but the compressor in this video is geared more towards load levelling air bags
@idaholanesadventures8157 Жыл бұрын
How did you pair your phone to the bags?
@neil88073 жыл бұрын
Did it squat alot before the airbags?
@Donslife3 жыл бұрын
Not with my boat, but I expect it to with my holiday trailer. Boat is about 6000lbs with the trailer and just levelled the suspension out. The holiday trailer, loaded with stuff will be closer to 7500lbs
@neil88073 жыл бұрын
What does your door jam sticker list for payload and tow capacity?
@Donslife3 жыл бұрын
@@neil8807 8800lbs
@CatterlinRanch Жыл бұрын
Nice install!
@Donslife Жыл бұрын
Thanks. It has performed beautifully
@AndresGutierrez-ej9ng2 жыл бұрын
Hey Don, Your Videos are very informative and well made, I agree I think that is a good place for the compressor I’m about to install the same system, Did you need to relocate the horn, I have 2021 Dinali package 3500 HD and the dual horn is in that location from factory,
@Donslife2 жыл бұрын
Hey there 👋🏼. I haven’t paid attention to the horn location on the 3500’s. I think you’d have to plan a good spot for relocation if that’s what you want to do…and extend the wiring.
@bermudezluis69 Жыл бұрын
Thanks for sharing. Great idea. I’m looking to do the same. Do you know what length you used for the self tapping bolts? I ask because it appears the bracket for the compressor won’t sit flush because of the fender bracket.
@Donslife Жыл бұрын
I think they were approximately 1.5" long since the fender bracket isn't a flush surface. You just need about 1/2" to penetrate to get a good hold.
@galotamburini74392 жыл бұрын
Great video
@Donslife2 жыл бұрын
Thanks
@danielrios-ym4hm2 жыл бұрын
What shocks did you installed my truck is rides funny
@Donslife2 жыл бұрын
Bilstein 5100 ride height adjustable in the front for the AT4. Air bags will add a little more stiffness even with minimal air in the bags too
@hysonperez9110 Жыл бұрын
I need the pairing 😂
@brianpossin53523 жыл бұрын
Where did you end terminating the wire that will only allow the compressor to work when the ignition is on?
@Donslife3 жыл бұрын
😂 I haven’t got around to it yet. My plan is to trace a circuit in the engine fuse panel that is only active when the ignition or acc is on. When I do it, I will report back.
@brianpossin53523 жыл бұрын
Which bolts did you use to anchor the compressor? Self tapping bolts? That support you drill into is a full tube so I assume you didn’t use lock nuts as there is now way to get at them.
@Donslife3 жыл бұрын
@@brianpossin5352 I did use the self tapping bolts once I bored a smaller hole for them to bite into. Still just as tight as the first day
@brianpossin53523 жыл бұрын
@@Donslife thank you!
@ckillion332 жыл бұрын
Hi Don, I think you mentioned that you ended up tapping into the existing trigger wire of the air compressor when you wired up the Auxbeam 8 gang switch. I see here that some asked the question I had, what fuse did you end up using as the trigger wire? Inside the cabin or engine fuse box? Fuse #? Sorry if you already answered this but I didn’t see it in any of the comments.
@ZampostOk2 жыл бұрын
Did it ever overheat and where it stops working?
@Donslife2 жыл бұрын
I haven’t encountered an overheating situation
@ZampostOk2 жыл бұрын
@@Donslife thank you very much for you answer!
@sneakyassbastard3 жыл бұрын
Will this kit work on my 2019 Denali 1500? Tow a camper and another small work trailer and had to add timberen bump stops to get the truck level off. But they kill the ride when I'm not towing.
@Donslife3 жыл бұрын
Since it isn't an AT4 it does require a different part number. Air Lift's site can show you the exact ones.
@scottsyellowrubicon13 жыл бұрын
Where did you get that long 90 degree extension for you drill?
@Donslife3 жыл бұрын
I think Home Depot. 1/4” 90° drill adapter. Then you can add any extensions needed for either end
@cowboy010102 жыл бұрын
thanks for the instructions just curious how you connected the pink ignition wire and what fuse adapter did you use
@Donslife2 жыл бұрын
I used a micro 2 fuse tap from Amazon and connected to the heated or cooled seat circuit. I forget the fuse # 24 or 27 maybe?
@javieralcala9805 Жыл бұрын
Its on the right side the number is f20 cool seat
@rubencastano67713 жыл бұрын
Cant wait for the towing review.
@Donslife3 жыл бұрын
You and me both! My plan is pull both the boat and holiday trailer in the video and see how they each handle with the bags empty and filled.
@rubencastano67713 жыл бұрын
@@Donslife nice! I pulled my heartland trailer last week with my 19 at4 for the first time and it did feel a bit bouncy in the back. Trailer weights 5700lbs dry.