DONT DO WHAT STEVE DID! 5.3 JUNK YARD DOG OFFICIAL GIVEAWAY!

[@rayrussell6064]

This old dog has learned something new from Bill's class room 101 single plain versus dual plain on a LS thats one mighty little motor for just a cam,intake and carb by the way the junkyard dog t-shirt is awesome. Uncle Bob's truck turned out to be one good looking truck and im sure you wont find one that has been better taken care of. I wish you all good luck at sick week. God bless and as always be safe.

[@randallcross5085]

I have a question for you Bill is your Malibu been frame notched and if not what is the width and back space on your rims

[@jeffreyweaver6355]

Single plane on everryyyyyyyythingggggggg lol

[@Anarchy-Is-Liberty]

@@jeffreyweaver6355 My BBC makes overall better horsepower and torque using a dual plane!

[@nicksavage1791]

That black Ford at Jax wax is absolutely beautiful. I can only dream of having a truck like that

[@CLRRS1963]

I love the little history lesson clips u do, it shows ur passion for this stuff. Keep up the great content Old Man!

[@williamcole464]

I love Bob's truck, kudos to Jack's Wax, and the paint treatment. Outstanding results. I would buy that truck in a Heartbeat.( No pun intended).

[@CCRider5312]

Bill Knew What he was talking about on that Intake Manifold ! Ya just can’t snuff the old School guys, we might not be computer savvy but common mechanic sense wins every Time! Great Job Bill 😁👍🏼

[@Anarchy-Is-Liberty]

Sounded like Terry told him what was what, Bill simply followed though.

[@gthomas5880]

Yea Bill I think you need to buy that truck. Truck looks brand new. Those guys do a hell of job.

[@steelmill]

Nice info,It would be interesting to see what a LQ9 6.0 ltr would put out with a cam and a carb setup.

[@enigmacamaro]

should be close to the same just more power. the bore is the big difference. 5.3 is 3.78 and 6.0 are 4. for a na set up on a 6.0 rec port ls heads and good cam will make a massive swing for you. that combo should make over 475 with ease.

[@davidreed6070]

I know an l96 Will make 550 hp 500 tq with a cam and springs.

[@RaceRedFairmont]

on my channel my wifes mustang lq9 with carb made 456 rwhp through a powerglide . Btr cam , viktor intake 799 heads were sent to texas speed lower end all factory 170k rings bearings and all kzbin.info/www/bejne/iYjLln1qeqxsbrc

[@RaceRedFairmont]

kzbin.infoY-iRUUMnNBQ

[@stevenbelue5496]

​@@enigmacamarothose rec port heads are massive for a production head and they raise the power potential considerably. I believe peak flow flowers, while not everything, are comparable to those gen 1 trick flow 230s or the 220 afr's. I feel like it's a trade off, air flow vs cylinder sealing with the LS vs SBC. More difficult to have symmetrical style ports with 5 bolts per cylinder but it's been done. The LS would have benefited from that one extra fastener.

[@jasonbose3507]

YES, A GREAT VIDEO WITH BOB THE ENGINE 🚂 BUILDER!!! Also, loving 💕 that Jimmy Dale for President shirt 👕!!! Jimmy or Bob for President, yeah 👍. At least the country will be ran right, a smooth running machine! Anyway, thanks for the video 📸.

[@pedroportalatin6751]

She's such a sweet heart god bless her

[@Zach-ku6eu]

@17:38 🙏 Would you give us a 'Walk Around ' video of this shop's cars?! *I see Herbie the Magic Bug back there!*

[@THATGUY4YOU]

Thanks guys I’ve got a new favorite channel to get me through the work day 😊

[@wizza2315]

That black Ford F-250 is the nicest thing I've ever seen on this channel!🔥

[@donaldfuller5041]

Been dreaming of one myself. I loved my old Ford trucks but Vermont winters destroyed them

[@brianherron3515]

Ford's suck balls!!¡

[@OpiTizzle]

​@donaldfuller5041 as uncle bucko would say, lack of maintenance 😅

[@JollUsARoint]

Pops Uncle Terry come to the rescue we're going to have to start calling Bob the Junkyard Dog we've been waiting on this video pop's those were some great numbers the merch is On Fire it all looks great see y'all soon hope everybody has a great one💚👍🏼👍🏼👍🏼🌍🇺🇲🥰✌🏼

[@ckfpv]

Wow that Truck looks so good guys and gals who worked on it great job 💯💯💯💯💯

[@benmccrady2152]

Frig yea finally ....I feel like old man's garage is a soap opera for men and I get all emotional when my "story "isn't on lol!!!💪 💪 💪 💪

[@petercasper224]

The brake fiasco looks very similar to a cummins game of chase your tail! The deck truck looks........fabulous, guys! Outstanding video. Don't let Rooney get wind of brake gate. Steve will not hear the end of it if rooney shows up again.

[@garyclarke2385]

Bill and Miss Vicky are, have already called it " our truck " so imo they already had been leaning towards buying it but after jaxwax, its OMGs now !!! Difference between the before and after was like taking it out of the showroom..that guy is great at his craft!!!

[@peetduplessis7401]

Rooney 🐒🤡💩

[@tonymorse7178]

I am enjoying watching Bill get excited making good power out of a LS. Carbs aren't dead yet - I think Bill has proved that. I also don't think a junkyard 327 old school small block can make those numbers in a comparable situation. That dually does really look brand new!! Those guys are the best - and good luck to Billy with his awesome '55 on sick week -my fav in your fleet. (Gandpa's was - but.....) drag week is truly the test of a real street car..

[@d_isturbed5493]

Lets get some Devil Dog oven mitts up in here!!! LOL Give me 10! Great video Bill thanks for taking us along! But seriously who is with me for the Devil Dog pot holders and oven mitts?? Be way better than the ones the wife makes me use currently! LOL

[@richardsmith-qy6vl]

Im off work today November 2nd 2024 and just wanted to relax and check out some old videos. I love this stuff

[@WhiteManXRP]

LS engines are the most reliable engine aside from the SBC ever...it's a wonderful, simplified newer V8, very mechanic friendly engine. GM 4 LIFE, what can I say 💪💪😎🇺🇸🇺🇸

[@terrenceadams3481]

Hey Bill! Fantastic and learning video. This is what I like. Great job! Learned a lot. Keep these coming please. The boys will keep the racing going. Always a big smile when Miss Vicky comes on air. Wonderful job. Look forward to the next one. As always stay safe! 😀😀❤️

[@skyhijinx]

Hey there! My brother told me about your channel and I had to check it out. I had a '79 Malibu Classic in highschool back in 2000. My first V8 and I loved it. Some lady with no lights on t-boned me one morning and destroyed it. Yours is beautiful.

[@Ron_Presley]

My 5.3 LS in my 2002 Suburban 1500 LT sure does have a ton of torque and it’s totally stock with 162,000 miles on it and runs smooth like a brand new sewing machine. Bill great video and full on pro edit. Thanks for all your time and hard work making these videos. ❤️🐕‍🦺🐕❤️ Well guess I’ll be buying a couple of these new shirts for myself and my granddaughter.

[@Peteblz1]

40 minutes of pure joy! Thanks for posting bill. Excellent work and excellent video. I love this dyno stuff.

[@jasonbose3507]

Oh my gosh, it was sooo funny hearing the Old Man talk about his kids. Taking on the heat for Billy's slow orders and mistakes, what a good Dad. Plus, his Mom helping on the orders, also, a very awesome Mom. A Mom or Dad don't have to chip in on a grown man's business. After High School, that's it! Everything else is the kindness of their hearts. These parents DO SO MUCH FOR THEIR KIDS. IT'S UNBELIEVABLE TO witness who have never had that kind of love or help. Great job AWESOME PARENTS TO TWO AMAZING 🤩 SONS!!! Anyway, thanks for the video 📸.

[@looneytunes307]

Great job on the LS JUNKYARD DOG..The old carburetor is a lot better.. Hope you and SRC, And Jimmy Dale have a awesome time at Sick Week.

[@2old2rodeo]

I didn't even know there was such a thing as silicone break fluid. I guess a guy might have to take some out of the master and test it in a container on the bench by adding some regular break fluid and seeing if it thickens up? Thanks for the videos!

[@jondahl3173]

Never mix dot 5 with dot 3&4 fluids. Completely clean out the brake system when swapping to dot 5.

[@danielheadrick7286]

Is uncle Bob going on sick week with you Bill. And yes that truck looks brand new.

[@garyclarke2385]

26:05, seeing Bob hollering and his surprise with adding the 2" spacer just shows even with his vast knowledge and yours to Bill, you both said it "YOU LEARN SOMETHING EVERYDAY & WITH EVERY PULL ON THE ENGINE DYNO... I CAN ONLY IMAGINE HOW MANY ENGINES BOB HAS HAD ON HIS DYNO, NOT MANY WOULD HAVE HAD A REACTION LIKE THAT... BOB N BILL & THE COMPUTER DIALING GUY !!! GREAT SEEING BOB ENJOYING HIMSELF AND COASTING ALONG WITH SRC & OMG & GEN2 KEEPING HIM BUSY BUT NOT PUSHED REGARDING STRICT TIME LIMITS.... 🙏🇺🇲🇺🇲BOB MC VEY🇮🇪🇮🇪🙏

[@feff5717]

Question Bill, what are your thoughts on the tick tak toe grid on the bottom of the single plane intake being smooth? Wouldnt atomize the fuel properly if not there? I would think that would cause the fuel to tumble in the runners slowing it down making less hp. Someone smarter than me designed it but just curious your thoughts?

[@WhiteManXRP]

440ci SBC. Wow.. I can't wait Bill, that thing is definitely gona be interesting, with your expertise 😎💪💪 Maybe do a dyno session and tuning on that bad boy.. Heck yeah man, wooo Gets me so happy to see chevrolets being built,saved, tuned, and back frolicking on the streets, just brings me happiness beyond anything.. Keep saving those GMs brother, hats off to ya 🙏

[@carlgill5946]

I absolutely love exactly how you run your channel. The content is exactly what I’m looking for . You talk about the things I’m always wondering about , you explain the details of things I’m always wanting to know about it’s killer my friend! I am a big fan for life bud

[@jonrider8277]

Whether you buy Bob's truck or not, take the wiring loom that sits against the a/c line and move it so it doesn't rub on the line. it will short the cam sensor wire to the metal line and kill the truck randomly. I've seen it several times in that year of Duramax

[@jbrissey2872]

I've been running a carbed LS for about 7 yrs now. We started with a junkyard 6.0 with cam motions junkyard dog cam. Specifically designed for a sbe 6.0 with rec port heads. This cam with matching valve springs, vic jr intake and 750 HP holley made over 500hp. And with a th400 and 3.55 gears it ran 10.80's @ 125mph. At IRP. In my junkyard third gen Camaro. 3500lb raceweight.

[@theoldmansgarage]

That’s pretty good!

[@jbrissey2872]

@@theoldmansgarage Like you said. For someone on a tight budget thats just trying to have fun. It gets the job done. I eventually saved up for forged 408ci rotating assembly. With some good 2618 wiseco pistons. Its been together since 2017 with at least 300 passes and a few hundred street miles . My winter upgrades are throwing in some new valve springs and changing the rear main seal. Last fall we played with a 200 shot on an Induction Solutions Saturday night special plate system. After some suspension tweaks it ran a best 9.01 @ 149.98mph 5.74@120mph with a 1.24 60' @ 3500lb raceweight. Built the engine before covid for just under 5k in parts & machine work . Definitely not be the fastest or coolest car. but it does alright for a budget beater lol.

[@dragin79]

What’s the white nova replacement? The suspense is killing me!!!!

[@robertwest3093]

Like I always say... better than anything on television! Thank you brother for sharing your totally awesome cars with us who don't quite have the coin to own.

[@Rust_Belt_Fab]

Awesome video at the machine shop with the LS engine. It was like watching Engine Masters. 👊🏻😎

[@Rust_Belt_Fab]

@theoIdmansgarage Wrong scammer!! Everyone that watches this channel knows the scammers.

[@TheEpmd40]

I have to say that I just stumbled across the channel a few days ago and I thoroughly enjoy it and was binge watching.

[@theoldmansgarage]

Welcome! And I’m glad you enjoy it

[@TheEpmd40]

Thank you and I’m glad you have merch for husky guys. But any blue oval cars or all bow tie?

[@flakesinyershoe8137]

Man, that little engine would be a lot of fun in any hotrod. Nice job.

[@otisbailey5455]

Learned and expensive lesson this week with E85 in my 5.3 LS. Would be wise to periodically use pump gas with a detergent. Deposits over the long term can be expensive.

[@garylucier6817]

Hint, not necessarily silicone fluid. I think someone actually put power steering fluid in the master, ass that stuff destroys the rubber internally on brake systems, the 2 fluids not only do not mix they get nasty together. Though they can look very much the same.

[@nativenation3296]

20:38😆...with that grin ya know it only gets better with racing with family and friends. What an awesome upload. 💯👌...

[@stevenminix]

ice work splittin hairs on dyno, really nice seeing that thing work. awesome video…

[@WilliamShaw-vn2lm]

Great to see uncle bob getting to work on different types of engines thank you for the content bill

[@jaredspear8140]

Safe travels to Florida. Hope y’all have a great time at Sick Week! That event is turning out to be one of the biggest and only two years old. But having a winter time drag & drive I believe is allowing it to grow because everyone wants to get out! Hopefully one day our Nova will participate.

[@gtnoslp]

Good vlog....surprised a parachute is being put on the '55 and its still using old school drum brakes in the rear?! Yep, single plane manifold is great for higher rpm applications, Dual plane is better for torque and lower rpm street applications 😉. Devil-dog shirts look great!

[@ohdamnitsthatguy60]

Hmm a documentary style video I like it. This is not a budget build but channel. Nice to have the money for it. That saves time when you need to get parts. And I think this is a great way to teach new car builders. Keep doing what you are doing.

[@robertjohnson4784]

Hey, bill. I live in the Tampa Bay area 30 miles North of Tampa E85 gets scarce around here. Not all stations carry E85 especially in North Florida. It will be hard to find. Good luck, guys will see you in Bradenton.

[@docholiday6944]

Thanks Bill!!! I liked uncle Bob’s shirt! 👊✌️❤️🤙🏼🤙🏼🤙🏼🫡

[@darrellclark8112]

Like that you show on the screen what you have done with jets timing etc really helps me keep up with what you are doing and the results of the change

[@waltersmith1018]

Love the video!!!! Question about merch?!?! Back in my day all the racer tees were white. Now everything is black. We race in the heat most of the time. White is way cooler for us old buzzards. Plus if a fan greases up a white shirt too bad they will buy a new one! Even though I’ve bought your merchandise I’d rather have white shirts! Sorry if I’m a pest! Just thinking out loud.

[@jasonmillspaw6970]

Sweet job on the junk LS. I just like how your videos are put together. Very good job sir. Thanks for the update. Been waiting for it.

[@kennethimpelmance9107]

I love these videos. That Duramax is a great purchase. I’d your getting it for less than 40k your winning. My 09 with the 6.6 has 350k miles. I’m the original owner and trans and motor are original. Only maintenance has been done. I think the trans is coming but I’ve thought that am for the last 100plus k miles.

[@MrBurris_]

Great job Bill to you and ALL your team, you're getting us great videos in a timely manner .... Tommy is on the struggle bus it seems, NO videos from SRC in 9 days and you have brought us TWO nice quality videos. This last one was over 40 minutes instead of the the normal 20 minute videos that most other KZbin channels release. Keep us the good work and tell Tanner to keep his head up, we are glad he is a part of the team.

[@MintMonte87ACSS312]

446 is pretty damn good for just a cam and intake. Imagine what a set of heads, more tuning, and some nitrous or boost on it. Very cool! Glad to see another video bill!

[@williamstamper442]

When i see an old Ford pickup like that black one my mind always goes back to the old farm truck when my mom lived on a farm in western Kentucky. It was a short bed 1975 F250 with a cleveland and the granny gear 4 speed. It had dry rotted 35s to the right rear #4 spark plug was broken off for years but otherwise hit on all 7 just fine. Every fall we went way out back and cut cedar for fence posts. Every year we all said the same thing "dont smash the back window" and every year the truck got a new back window. That truck was a beast, we used to use it to pull the old john deere tractor out of the mud! I was only 15 maybe and could drive that old thing anywhere on the property with ease. Such a unique piece of property, the main farm was only 55 acres but when you passed thru one little gate in the rear tree line it was like opening up another world...there were literally thousands of acres of land locked land owned by heirs of the rich people up in L'ville who didn't even know they owned the land. When i say thousands of acres im talking like one half of Ohio county, one of the poorest counties in all of Kentucky, one could ride the trx honda 4 wheeler for 8 hours a day and not see the same place twice. It was also scarily easy to get lost. If one got lost the plan was to ride due west until finally coming out to the only 2 lane county road in the area. Going north or east would prove futile as you could ride for 2 days and still not find a road. Man those were the days for a young boy from Detroit who spent his summers down there visiting with mom and played on a farm all day long. That old F250 Ford had a farm truck license plate which meant it was streetable but anything over 35 was a teeth chattering bad time!

[@Gokywildcats11]

Alot of deer in Western ky. I live near Lexington. My bucket list is to find a place to hunt in western ky

[@jasoncook9269]

Dude the truck was detailed. I mean if you know what you’re doing, then it’s gonna look like that! Man it must be really nice to be you all!!!

[@xsuperstar95]

The stripes and the snorkel scoop look great together . So different in todays times.. Its definitely a sceamer too!! Congrats on the 9s its sceamer

[@GrayMatterBBC]

That Devil dog shirt is pretty freaking cool! I missed the 427 giveaway and I'm at least getting one or two of these shirts! Love the family and your different channels. Y'all have a blessed day ❤🙏🏻

[@jeffhughes2913]

That motor is what I need for my sons c10 going to start teaching to bracket race this spring.

[@bobtucker8875]

Great content guys 👏 thanks for sharing. Man oh man I love looks of Bob's truck. Sure hope you get it.

[@spooler7828]

I am always on Ignite Red. I only run pump E85 when I am just dinking around.

[@looneylonzo28]

37:13 red eye, junkyard, dog all the way it matches the build I mean if it was a four-cylinder yeah, you could use a Chihuahua😂 I love Miss Vicky, but I think she’s wrong on this one but you know our better have always win in the end.

[@TheDennisWagner2]

Great video Bill. You guys did a great job getting that little LS to reach its potential. I'm a SBC/BBC guy, but there is no denying the potential of the LS platform. Pretty cool to see you keeping it somewhat old school with the single plane intake and ATM carburetor. Congrats to all involved. I have to say my OMG hoodie has became a favorite of mine and people love my 427 t-shirt. I'll have to get on the pre-order list for the two new t-shirts. Keep cranking out the great videos and we'll keep watching. Best wishes for success during Sick Week. Stay safe and Have fun!

[@kennethchapman9564]

An aftermarket EFI intake may make even more power. Fuel injection distributes the fuel much better than a carburetor. That said all my muscle cars have and will have carbs because I know more about carbs. Old guy here too, is what its is. Bobs old truck is painted one of my favorite colors. I have owned more red vehicles than any other color. Two of them Ford F-250 Super Duty Diesel 4x4 trucks. I lived just around the corner from the little airport when I had my 67 Fairlane GTA with 428cj running about 13.75 to one compression and ran it on aviation gas which low lead 106+ octane naturally aspirated with a Holley double pumper. Looking forward to see what your going to do with the older white nova. Brake gate saga very entertaining content btw. Go fast and be safe. God bless you and your family and friends.

[@gf6.6]

You guys need to do this more!!!! This dyno and tech stuff is so interesting!! Ps that Duramax looks beautiful... it's a keeper if Bob will sell it.

[@aeroflopper]

many years ago when brake fluid wtc came in small tins, my mate and i was working on his mk5 ford cortina, working on the brakes my mate not the brightest lamp in the box poured a tin of epoxy resin in his master cylinder and we continued to bleed the barkes, later that day i asked my mate why is the brake fluid tin still sealed snd where did the tin of epoxy go? he had that car many years after never had an issue with the mixing in the resin.

[@ronsherfy6291]

The 5.3 is impressive and I’m looking forward to the 327 build if you commit! Awesome work!

[@brandonjohnston7746]

Love you Bill, can't believe bobs truck turned out so good, that black Ford pickup is super sharp, I love Billy's 55 as well even tho it's got covid lol, the Malibu still holds my top spot tho, all I need is a job working for you Bill and I'll be forever happy, I am ase certified but it's never really done me any justice, I've been working on cars and race cars my entire life, I spent 1500 hours on my old buddy's 69 gto, full rotisserie resto, 468 stroker with a 4 speed, he's sending it to barret Jackson this year, I hate to see it go. I've got blood sweat and tears in that car, I need a job bill hire me lolol😂

[@mrhighlight8771]

The earliest crew is here for support and we hope you have tons of fun in Florida. We need consistency in those times..save the fastest for the last day.

[@davidblain2714]

Thanks Bill- will see when your on my dirt at Bradenton Buddy..... Find Vic, He will take care of the crew....

[@automotiveaddiction428]

Might need to send my motorcycle to Jax wax..I put spray on polish 3 years ago..its in everything..I can't polish enoughto get it cleaned out of everywhere. stuff just comes out of everywhere.never clean.

[@deansutherland3570]

Bill,,you had ignition "issues" and intake "issues". None of that is a "problem" not for you & Bob.. Man I love these episodes. I was pretty excited to see this video up this am. Keep up the good work Cheers from🇨🇦

[@alertgasper]

I wonder if sleeving that pump gas block would be cheaper than replacing it with another aftermarket block.

[@donhorner6019]

That ole GMC looks better than new,mileage is great,I’m sure you will not be disappointed in that purchase.

[@davesperformance88]

Nice to see people putting timing in these motors. There are tons of youtube guys saying they don't make power over 24° lol

[@tico4940]

That GMC has features you just cant find,dont slib Bill,snatch it up,realy enjoy how youve added Uncle Bobs shop into your program,and he benefits to without the stress of working on customers stuff.Nice colaboration and bob looks like hes enjoying it verses stress of to many projects.

[@1975napier]

I hope y’all have a great time and enjoy sick week without any major complications. Prayers for a safe trip.

[@zachniverson8816]

Bill my favorite videos are those like these. I love in depth tuning. Like you said no trick or secrets just what works and what doesn't. I watch engine power on power nation and I like their shows but Pat doesn't really do in depth tuning. They focus more on the build and specs which I do like but all that won't get you anywhere without proper tuning. Keep up the great work!

[@MrImpalaRider]

My 03 5.3 with an Frankenstein intake and 53 pound injectors with a Texas speed cam made 484 horse and 402 torque. You can say a carb is better than fuel injection but those that really TRY with fuel injection know the truth

[@natejames5720]

That was a Hell of a Dyno session gentleman!!

[@BDauto86]

I wouldnt expect 1 or 2 engines to change you but gotta give credit where its do. Thats just alil 5.3(325ci) engine with cam, headers and intake 448hp is respectable. The 6.0 and 6.2 only gets better. Either way good tests and data thanks for sharing and that GMC is really sharp now, def hard not to keep.

[@jaywebb3105]

I'm going to put that LS in my one owner 1977 Chevrolet Malibu Classic Sport. Taking the 100k mile 305 out and keeping it in reserve.

[@williamwidener4571]

You might want to do some investigating about where to get E85 on day three at Gainesville raceway. I live here and have only seen it in Ocala which is 20 or so miles south, the way your gonna b coming from. Just a heads up. Looking forward to seeing yall for the first time in person.

[@scottmckeighan1201]

I must have missed your video about what the plan is for the white Nova. Also the E85 deal is kinda like finding a charger for your EV when you're at 10%. Lol

[@LonnySelf]

only one I know doing so is that old Canadian Mopar guy he has changed heads and intake and playes with the time a lot fuel , great stuff you all

[@michaelkirkwood3316]

😮so I get the single plan intake what kind of cam components did bob install and carb

[@allanlee5196]

Really enjoyed the dyno session and the real results. Your videos are all very informative and the hands on is perfect 👌 Thank you for always going the extra mile for us !!

[@alankieffer7631]

Great video Bobs truck looks amazing i hope you buy it that LS sounds awesome great little motor t shirt designs look killer iwe will be in Florida at Orlando on Sunday gope to see you guys there and at the end of the video sounds like you guys bought another car cant wait to see itstay safe in Florida

[@gilbertwashburn7095]

Great video that little LS really talks that'd be awesome in a Vega with a Powerglide that would be a lot of fun perfect for hopping around town thanks to the inspiration

[@travispeoples]

Flex fuel sensor and efi eliminates all those pump gas / e85 issues... just sayin' 😂

[@theoldmansgarage]

Yeah if you don’t mind being down on power 🤣

[@travispeoples]

Just jabbing you in the ribs 😂... Love you guys and Love your content!

[@NastyNate98]

I really hope you read this Bill and really would love to see you try it or get some and study it maybe with Bob in the machine shop. Please research Energy Release engine additive or ER. My old man used this product in all of his race engines. To this day we still use it in everything we have. We put it in the engine, transmission, front end and rear end. If your asking do I believe if it works this is the only thing I can say. My Dad flipped his old 97 Cummins 5 spd truck yrs ago in a snow storm in Idaho. Due to the fresh soft snow pretty much all that was hurt was the cab. But it sat upside down overnight. Long story short the transmission was obviously almost completely empty. Body shop didn't remember to refill it but had checked it off the list. Go figure. The truck drove 172 miles before the transmission locked up. My old man believes the only way in sam hell it made it that far was due to the Energy Release in the transmission. Also note that you only add 1 ounce to every quart of fluid as it's a metal conditioner. No one in family is in business or is a dealer of this product and we don't know anyone that owns it. We buy it at 120 a gallon just like anyone else. I personally don't think it's snake oil but hey who knows. I would be willing to bet you and Bob could figure out if it is or not.

[@cchevyboy]

Junkyard dog shirt design is badass🔥🐶 Cmmonnn now

[@timhuddleson3614]

I can relate I run my 377 on E85 with a 6/71 and I always have to check my route to make sure there will be fuel and have run into out of order pumps even here in Iowa

[@dirigodave7801]

That black Ford f250 in the detailing shop was gorgeous!

[@hunterharper1891]

I want one

[@def1791]

I would take it over anything else.

[@rongeipel7076]

Not to sure about that ole LS but like to see that 440 ci small block on dump with #’s great video

[@Patricia-no1ri]

Great video! Love the new merch. Any chance the 55 and Nova design will be available in a zip up hoodie?

[@thomasariss9601]

I'm just surprised that Billy didn't go all out on his brakes and get strange brakes set up on the 55 lol

[@rpturbo]

Just wanted to mention I can't click on the "more" button in the description to get to the shopping links. Wanted to see the newest shirts......

[@shanegerhardt6316]

Never thought I'd see the day that Bill would be buying LS stuff!!😂😂