Doom Metal Pedalboard

[@William.Driscoll]

'FU-2' might be the best name in pedals 😄

[@FuzzlordEffects]

Thanks hahahah! I liked it so much I got it tattooed inside my lip 😂

[@William.Driscoll]

@@FuzzlordEffects "A thing of beauty is a joy forever," said Keats 🤘🤣 Cheers!

[@lukaschris9333]

instablaster

[@shredderstv4929]

Can you make a sludge pedal board? Primitive man style like MASSIVE sound

[@HenryFordOfficial]

here is my sludge metal pedalboard: -Tuner -Tubescreamer -Proco Rat

[@camdero3294]

Shredders TV what kind of amp you running through?

[@FuzzlordEffects]

Perfect setup!

[@joncheuvront5487]

I look forward to seeing/hearing more of that echo pedal.

[@FuzzlordEffects]

Full demo coming soon!

[@sjaatime]

Going to sound a little weird, but I use a HM2 for a doom sound. It works. It's a very crunchy doom, kind of like Black Tomb. I don't know what makes it work, because it's that death metal pedal, but I love it. Could you maybe branch out and check out a HM2 and see if you can make it work for your sound? I use it the same way that everyone else does, everything to 10.

[@FuzzlordEffects]

Both the dudes on Conan were using HM2 style pedals when I say them last 🔮 Wild right?!?

[@nibrocnoel3240]

I think entombed used HM2 s in their first couple of albums

[@nicoguarini28]

@@nibrocnoel3240 No shit sherlock! Of course they did.

[@Nicholas-Santiago]

I'm loving the versatility in the different types of gain here, your pedals stack really well! On my board I'm running a Digitech Bass Synth for its crazy octaver/filter sounds into my Jelly Fuzz which is a heavily gated silicon fuzz reminiscent of a Big Muff but with much more midrange on tap, which I then send into my Dunwich DA120 which is my primary source of gain. I run that signal off my board and into my Ocean Machine which is essentially two delays, a reverb and a Looper in one pedal. You can swap the order of the effects within the pedal and create all sorts of loops and continue to send them into each other. The reason I keep the Ocean Machine off the floor and on its own stand is so I can adjust its paramaters as I play, I have found it's more of an instrument than effect pedal. Because it has stereo ins and outs, i can run my pedalboard and my Venom keyboard into both of my amps and switch at any time! For amps i run two of those high wattage Peavey heads from the 70's....Or at least I did before one of them broke! Get this, a fat rat crawled into the amp and died decades ago after chewing through one of the wires, and its nest was insulating the heat from the transformer. One day I looked inside the amp and discovered it, and I had it sent to a tech...and once it was cleaned and removed it stopped working. It's almost as if the poor little guy was grounding my amp. Sacrificial soul to keep my tone alive! Now my board sits packed up and I just play through my little Digitech multi effect unit with headphones :\

[@robertlewis9243]

I subscribed a couple of months ago because I knew I wanted to check back and really start watching your videos. They are absolutely amazing! These types of videos where pedalboards are customized are the best!

[@FuzzlordEffects]

Thanks!

[@jonathanb.3028]

I would love to see that doom screamer and the drone master together 🔥

[@FuzzlordEffects]

Great idea!

[@joshuataft5541]

I'd I ever see any of your pedals in the wild I'm getting one .I realy enjoy what your doing and the style you cater to .they looks so good to you do great on graphics and style

[@jkhan337]

that is a great idea on the tuner being used as a mute post fuzz/distortion!!!

[@FuzzlordEffects]

Thank you

[@horse_dog]

The coolest combo was Drone Master -> Dark Master -> model feT. My pedal board is very simple, only 4 pedals including a tuner. It’s a boss pitch black advance tuner, into a Abominable Electronics Hellmouth, into a Morley Power Fuzz Wah, into a Black Arts Toneworks Pharaoh. I use this board for both bass and guitar, but mostly bass.

[@FuzzlordEffects]

Now that is one cool pedalboard you have!

[@pissepartout]

Pharaoh fuzz is just a "god mode" pedal, a pity I can't afford it (around $220 in France :/ )

[@BeholdenToTheRiff]

Awesome video man! Love the new pedals coming out and the “Doom Screamer - Darkmatter - Model Fet” combo was killer🤜🤛🤘

[@FuzzlordEffects]

Cheers man thank you!!

[@ProfessorHumblesDelusions]

Excellent products and advice. I really liked seeing the underside of the board. ❤ 🤘🇨🇦🎸

[@FuzzlordEffects]

Glad it was helpful!

[@Crabdealer9]

Thanks for running through the board. Super helpful and amazing sounds!

[@FuzzlordEffects]

thanks for watching!

[@BOBRY1975]

Never would have thought to put a tube screamer in front of all my fuzz pedals... Stoked to try it out. That FU-2 looks like an awesome upgrade to my Behringer Super Fuzz... I tried out a Orange Fur Coat and it just didn't have the same balls some I'm still hanging with my Plastic Orange box. Thanks from the mountains of Colorado for producing your videos

[@FuzzlordEffects]

I was using it as a bit of volume and treble boost and tighten up the sound a bit (:

[@chrissteinbeck1734]

The timing on this could not be better. I am I the market for a new OD and the Doom Screamer may be the solution I am looking for. Can't wait to learn more about it!

[@FuzzlordEffects]

Should be done with first run next month 🔮

[@baileywatts1304]

currently I run an Ibanez AutoWah into a Boss AC-3 to an Earthquaker Devices Organizer to a Boss Super Chorus to a Caroine Meterore to a mini fuzz face. it's more psycho zydeco than metal, but it makes a lot of good sounds and probably needs a volume pedal

[@claytonblockenstienivanrot9291]

Man that model fits goes good with all of those pedals! My favorite was the drone master,micro pog & master fet. After watching another video you did on boards it got me to realize a better order of my board which was Acapulco gold-hypercoven-doomsaw-surya-doomcasterin my dirt chain but now your video got me to switch it to doomcaster-hypercoven-acapulco gold-surya. I have an active evp Jr. Volume pedal at the very front a custom audio electronic wah after the Surya into a electro faustus photo-theremin into a mxr talkbox all in the front of that little orange 15watt micro terror dark and that crappy 8in cab that can't handle the loss at all then in the effects loop im using a little more ge 100 for my 4everbs and equalizer and noise gate and or delay effects which is getting tossed for individual pedals soon .power supply is a Hiree Amazon unit not sure if itsa daisy chain if it is it sure doesn't look it . Oh yeah by the way the name is Clay Block from Dallas, Texas and I'm playing either a dean vendetta 7string with active eggs but my full time demon slayer is a 2012 dean Thourghbred with gus g active blackouts and 24 volt mod...it's so sick. Sonically the out shine a y emgs I've used. Really liking the boards steve is putting out I'd like to own one at some point, so what do you think of the pedals im running as far as the order . I removed the doom saw possibly for good and is that model fet in your opinion better than that uber expensive life pedal by earthquaker?

[@yodhanhunter]

Hello from West Michigan. My favorite pedal combo on the board was (surprisingly) the clean sound from the Micro Pog, Dark Master and Model Fet. The fuzz sounds were awesome too, but that clean was so cool. A lot of things move around on my board, but some mainstays are DOD BiFet Preamp -> Dod250 -> Dod Carcosa Fuzz or Modded Russian Muff -> DOD Rubberneck Delay

[@FuzzlordEffects]

What a cool clean tone yeah?? Cheers!

[@cupcakeannihilator6742]

Eagerly awaiting the release of the Doom Screamer!!! 🤘🏼🤘🏼🤘🏼 And more than likely that badass Dark Master!!!

[@FuzzlordEffects]

Cheers!

[@Themightywoodrow]

Tuning in from North Carolina. Love the content and the products!!! I’d love to hear this board or any of the pedals through the Peavey Windsor.

[@FuzzlordEffects]

I think I can make that happen! Cheers and thanks for watching

[@dan.miller35]

Ooh yeah, me too.

[@ManGoDead]

I’m from Vegas, I use a Jhs Muffiletta, linked into a Joyo TaiChi, into a OpAmp Muff, TC Electronic June-06, and canyon to top it off

[@RubyRoks]

Great tones! I'll have to check out those boards for my growing pedal collection

[@FuzzlordEffects]

Cheers!

[@calebtylershepherd21]

I’m from West Virginia. Favorite pedals I use are Behringer super fuzz, Blaxx Metal Distortion I think it’s made by MXR. I never hear anyone talk about that pedal, but it’s like a big muff on steroids with a boost switch. From there my chain goes to my graphic eq, to my afterneath reverb/delay, then my Looper. Seriously check out the Blaxx Metal Distortion pedal if you can get ahold of one. It’s a badass Distortion pedal. Btw I love what you’re doing making these moded versions of some classic pedal designs. Pushing boundaries and coming up with something that’s not been done before. I’d love to try a few, but I know it’s hard to keep up with demand as a boutique builder. Just hoping I can eventually get a FU-2 to try out at some point.

[@FuzzlordEffects]

Behringer Superfuzz is an awesome one! I’ll have to check out that MXR something cheers Caleb!

[@georgieguidestones4881]

Would add a digitech hendrix experience wah because aside from having a wah and fuzzface model, it has a ton of other modeled effects in one box. Including a rotovibe, tape flanger, Leslie, octave fuzz, reverb, delay. Cheers from so cal

[@williamdesilva67]

Great video.. tuning in from springtucky..lol.. i like that doom screamer.. ill be watching for the release in my emails..

[@FuzzlordEffects]

Nice!!

[@murphyia1980]

Cool vid and some gnarly tones! My "pedal board" (aka the carpet) is a cheap compressor, into a Hotone Whip distortion, into a Keeley Fuzzbender, with a Keeley Caverns (which I *love*) into the FX loop of my Marshall solid state combo amp thing. Les Paul tuned down to C standard and it sounds pretty doomy ;-)

[@hailmaryrecordings8255]

I love your les Paul. Great sounds!

[@FuzzlordEffects]

Thank you!

[@cassvirgillo3395]

Hey Jason, I hope 2020 is off to a good start. A big shout out to Eric on the great work on the videos, a pleasure to watch. Your pedals look to be of the highest quality, and, with your electronics knowledge and engineering degree, well designed and thought out. Every success. Watching in Willamina, Oregon,C.

[@FuzzlordEffects]

Thank you Cass! Eric is really good at what he does (:

[@keithrohr6116]

Greetings from Green Bay, as a bass player my favorite pedal is the Darkglass Microtubes x. I would be curious how bass would sound through the Fu-2.

[@FuzzlordEffects]

Seems bass players dig the FU-2! Cheers from Oregon

[@dronefinger]

Hail Fuzzlord! Watching from Canada! 🇨🇦 Great video. Doom Screamer and Dark Master sound awesome. 💜

[@FuzzlordEffects]

Cheers Larry!!!!!

[@spdking01]

Greetings from Sao Paulo, Brazil. I have a Big Muff Pumpkin Pi and a Catalinbread Sabbra Cadabra pedals for Doom music. I also have a Boss Metal Zone MT-2, Turbo Distortion DS-2, Super Overdrive SD-1 and a Marshall Jackhammer JH-1 when I want to play heavier Doom music (more modern sound) or color a little bit my tone. The Super Overdrive I use it more for guitar solos - I set its overdrive level quite low, about 9 o'clock, raise up a far bit of the volume louder than my clean/off effect and dirty volume levels and set the tone to darken a little bit, about 12 o'clock or less, thus pronouncing more the middle frequencies, perfect for solos. The SD-1 has a strong output, enhancing any tone and volumes to highlight the guitar. And I put it as the last distortion pedal in the chain. I must say the Jackhammer does a pretty decent job for Doom music, even with Sabbath tones (although I know early 70's Sabbath relies more on fuzz type effect than distortion effect itself). It is a powerful and one of the most underrated pedals out there.

[@FuzzlordEffects]

All sounds like awesome gear and thank you for watching!

[@christopherkennedy873]

love screamers into fuzzes (pdx here) experimenting a lot with running different dirt in parallel loops - like to hear what other people are doing - slowly getting into more doomy territory 🤘💥❤

[@yoshiobermeyer2867]

Hello from Leipzig! Awesome board! My personal favorite of your board will be the doomscreamer! What I'd like to learn more about is modulation pedals (espacially vibratos, univibes and phasers) and how to put and stack them. And I really would like to learn more about amp combinations, because I started using a splitter by Lehle to run two different amps at the same time. Now I am able to actually use my old Fender with built in tremolo for wet/dry in a band context, yesssss. Perhaps, one of these themes fit into your video plans. Hope to see lots of your new ones in 2020!!! And a happy new year!!!

[@FuzzlordEffects]

Hi Yoshi! Will try to do some modulation videos this year

[@yoshiobermeyer2867]

@@FuzzlordEffects Yesssss, looking forward to that...Have a good time!

[@BAD-jt7ss]

The whole Fuzzlord pedal is so sick! A great video! follow ur instagram too!!

[@FuzzlordEffects]

Cheers!

[@dogehellkitty2926]

Got a TC Electronic Sub n Up....similar to pog. I have a killer clean tone now

[@FuzzlordEffects]

Nice!

[@marzbitenhaussen]

you should try the Model Fet first in the chain instead of last, I like the sound enhanced cleans going to your fuzzes is greatly improved that way, just my opinion

[@FuzzlordEffects]

I really need to get one!

[@brycet1505]

really liked the doom screamer. Been looking for a pedal for my clean channel that allows me to get a dark, light to medium break up sound for certain passages of songs and that might be it. Currently using a Bogner Shiva 20th anniversary to play sludge and post metal type stuff and it gets absolutely massive. It's not a traditional doom amp, but it definitely dooms. It would be cool to hear videos on different amps and how you can get certain sounds for doom metal out of them. Like for example, the jcm 800 has one of my favorite tones for sludge (iron monkey sound) but you never hear any demos playing doom out of them. Would also be cool to see how you EQ these amps to get certain doom tones.

[@FuzzlordEffects]

Ah cool will have to do a eq video sometime!

[@brycet1505]

@@FuzzlordEffects Would be awesome! it could also be useful because it can be hard to get a sound thats not muddy when you're tuned down several steps but you want a decent amount of gain. anyway, just a few thoughts. thanks for doing these videos.

[@kaytwoso7480]

Excellent video really liked hearing your pedals with a pog as well as hearing your new pedal I'd love to hear a bass played through that board

[@FuzzlordEffects]

Will try to make more bass videos this year

[@kaytwoso7480]

@@FuzzlordEffects cheers, thanks for replying

[@groteandreas1482]

Hi Jason, thanx a lot, another very informative video. Started building pedals two years ago because i was looking for my favourite (stoner rock) sound and after buying 3 fuzz pedals i started realizing that this is going to be really really expensive. So i started building heaps of fuzz pedals. My favourite ones are a boss fz2 clone, a univox superfuzz clone and a eqd sunn life clone. From the last one i got the idea to push the front end of my non master volume amp (laney la30bl) into a light crunch. So a maxed out clean boost last in my pedal chain. That sounds glorious with various dirt pedals in front but is a little tricky with noisy pickups (unfortunately i like single coils and P90s). At the moment i try to sort out what i built (because u can't use twentysomething fuzz pedals on one board) and make a working pedal board out of it. So what you tell in this video is really informative for me because that's just about the sound i want 😁🤘 What do you think about clean boost last especially into a non master amp? Cheers from the austrian alps Andi

[@FuzzlordEffects]

Superfuzz is a favorite! I think for sound stuff testing it different ways and recording a audio is best way to figure that stuff out (:

[@thinkingape7655]

Drone Master is my favorite here. Also Velcro sucks. Give this a try: 3M Dual Lock Reclosable Fastener TB3550 🤘

[@MetalHeadHippie]

Nice Board Jason. Pedals sound awesome as always. I'm going to do a demo of all my fuzz pedals up against each other. Calling it the Fuzz Gauntlet. I have 8 Fuzz Pedals So Far. To many to mention. Keep an eye out for the video next week maybe. I Dug the FU-2. From AK Bro Thanks. Peace.

[@FuzzlordEffects]

Cheers man! That’s a collection for sure

[@lucasdelgado4659]

Whoa! That’s piping! For some reason I thought it was a zip tie. Anyways, that board rules. This video is awesome!

[@FuzzlordEffects]

Cheers!

[@willbilly81]

An in-depth build video would be nice.

[@FuzzlordEffects]

Stay tuned!

[@willbilly81]

@@FuzzlordEffects yes sir!

[@uzelbruzel]

Will the DOOM SCREAMER be available as a DIY kit? 🛠 I believe you talked about releasing a kit in your Q&A 2 video 💜

[@FuzzlordEffects]

Not as a kit, decided that wasn’t a good fit for the kit.

[@Bigscott4130]

Still droning it out from Detroit here Jason. I really like how the FET really tightened up anything that went into it, not sure if it's got a really harsh compression on it or what, but damn did that add some definition with out thining out the tone... I'd be curious to hear what the Dark Master sounds like with a Bass Guitar. As for my favorite on my personal pedal board? I love my Tech 21 DP-3X dUg Pinnick (Yes, I'm primarily a bass player) distortion/over drive/frequency hammer pedal. I use it mostly as a pre-amp actaully and just love the way it chunks and growls.

[@FuzzlordEffects]

I’ll have to make a demo with bass soon!

[@bilhorinek7406]

Love the doom screamer. Hopkinsville, Kentucky

[@Goya_11]

the best pedal combo i have its a Rat into a ibanez metal screamer (a tube screamer with more bass). The screamer totally changes the sound giving that middle freq boost after the rat. Ít works amazing for leads. A suggestion for a video can be abot the digital echo, the proccess of designing, because i guess a bit of programming was involved into it, or what kind of circuit was used? Kaixo Euskal Herritik (let's see if you guess that language)

[@mattfleming2287]

Hello from Yonkers NY! Great video, as always. I really appreciate your approach to videos. You have such a calm voice and manner it just ,Ames me smile every time I watch you. I love the sound of the new delay. My fav tones were anything with the Drone Master-that pedal sounds awesome! The only pedal that I didn’t like was the FET pedal. It was a bit too brittle and harsh to my ears. As far as new videos, how about one on pickups? I have tried many pickups in my years of playing and as I’ve mentioned before nothing comes close to the Gibson Tony Iommi humbucker. Currently using the Behringer SF-300 (SuperFuzz clone) into another clone, the NS-300 Noise Gate. That goes into a Orange MicroDark into a Barefaced 2x12 guitar cab-which you should all check out! Absolutely amazing cab! Very cool Steve is making those beautiful boards. Anyway, Happy Doom Year!

[@FuzzlordEffects]

Happy new year Matt and thanks for the kind words! Would be fun to compare some more pickups. I believe the only one like that to date is the Les Paul video and used two different LPs with different styles of pickup. Just stock vs one aftermarket set though. Cheers!

[@mrittmaier4941]

I'm looking forward for you to make some drone masters this year. I set back the funds to I'm ready when they are.

[@FuzzlordEffects]

That one should be ready in just a few weeks!

[@Asmodeus_CE]

Watching from Brasil and running a Behringer SF300 before my high gain pedal, the Behringer SF300 was your tip on other video (Pedal board budget) My favorite one ever is the big muff, BUT!!! A need more space om my board for the other ones.

[@FuzzlordEffects]

Isn’t that a fun pedal to use??! Love that one. Totally have to make room for muff. Thanks for watching!

[@vincenzoerriquenz2356]

Hello from Italy! I liked a lot the Void Master, it added a whole different spectrum to the other pedals combined with! To be honest with you, I' m keen on the " softer", more vintage-y side of Doom, and i would like to hear and see how to create those kind of sounds, not so heavily downtuned ( D or C#) starting with a clean Fender style amp, and if it' s not too much in a budget friendly way! Thank you very much, Doom on! \m/

[@FuzzlordEffects]

I’ll try to add some stuff on standard tuning this year cheers!

[@FuzzlordEffects]

Will try to add some stuff in standard tuning this year!

[@vincenzoerriquenz2356]

@@FuzzlordEffects thank you very much!

[@phantomspcmn]

Hey Jason, greetings from St Louis! That's an awesome board man. Mine is just some wood I got from a DIY shelf kit with some rubber feet screwed on. I need to get one where I can put the power supply and the cables underneath. Favorite pedal combo? I'm really enjoying the Riff Master lately. Either into the crunch channel on my 5150 or into the FET-120 and bypass the 5150's preamp. Regards, Steve

[@TheDistortionPrinciple]

St.louis here too

[@phantomspcmn]

@@TheDistortionPrinciple awesome! Been to any good shows lately?

[@TheDistortionPrinciple]

@@phantomspcmn nah. Only been here a few months and have been work over 60 hours a week. Hard to catch a show. I hear fubar is a good place?

[@phantomspcmn]

@@TheDistortionPrinciple I went there last month to see Monolord and Blackwater Holylight. Nice place, killer show. 60 hours a week is no joke! Hope things go well for you!

[@TheDistortionPrinciple]

@@phantomspcmn thanks! I wanted that monolord show so bad

[@hansmartinjrgensen5252]

Hi Fuzzy I'm writing you from Vendsyssel(top of Jutland) Denmark. Ok here goes: Boss tuner,T.REX Bass Juice,T.REX Bloody Mary,Washburn Stack in a box,Boss DS1,Morley dual bass wah,Roland COSM chorus/flange/phase/delay/reverb. Tak for alt... Hanx

[@rickic8240]

I’m curious about the Dark Master now.

[@FuzzlordEffects]

First set available February

[@joshshadowens3634]

Hey from Joliet Illinois, i really really love the drone master and im mad i missed my chance at grabbing one when it came in used at the Guitar Center i work at haha. But for my board ive got just my digitech drop into a duality fuzz from dark glass into a 90s small clone. Super simple but does the job!!

[@FuzzlordEffects]

That’s cool there was one at your work!

[@joshshadowens3634]

@@FuzzlordEffects yeah im really sad i missed it but one day I'll have a drone master haha

[@Viscerok]

How do you get away with not running a noise gate with all that fuzz?

[@armata6530]

Man I wanna hear the FU-2 with the micro pog

[@FuzzlordEffects]

We will have to do more of that in a future video! Cheers Cannon, ~Jason

[@tyerestes7554]

Hey, what's up. I'm in Columbia, Missouri. A little over an hour from the JHS headquarters. My favorite pedal in this video was the Doom Screamer. The riff you played with it was fuckin' sick and I really hope I have enough money in my account when you put a batch up for sale. The favorite pedal I have is the Old Blood Noise Endeavors Rêver and it sounds great with my Big Muff.

[@FuzzlordEffects]

Cheers! That’s rad you are so close to them Tyler! Thanks on the riff (:

[@chriscurran1967]

Sorry Jason, watched this video yesterday on my Apple TV and forgot to comment. Watching from Pittsburgh as always!!! Loved the sound of the Doom Screamer, is it still gonna be a kit or a fully assembled pedal when it comes out? As for the combination I liked, I’d have to say that I dig them all!!! Great start to 2020, keep it coming Jason!!! 🤘🤘🤘

[@FuzzlordEffects]

Doom screamer will be a production pedal and doing a very similar version in kit form very soon

[@DarkCrowCity]

I'm Jordanian living in Libya I really injoy your video... I spent two years saving for a guitar amplifier I don't think that I can afford a pedal nice pedal though

[@FuzzlordEffects]

Check out stuff from behringer if you ever want a good pedal for a lower price (:

[@ericgonzalez8619]

Viewing from San Antonio, Tx. Can't wait to see what's in store for 2020. Cheers Jason!

[@FuzzlordEffects]

Cheers Eric! Hoping for a great year

[@akastonefaceddog]

Holy's fuck, thats a dream pedalboard right there, the Dark Master sounds incredible, gives me chills through the micro pog and FU-2. I think 2020 is going to be a good year for Fuzzlord Effects. Nice, nice work. Greetings from the UK. 👍

[@FuzzlordEffects]

Thank you!!

[@mindbodylightsound10]

I just purchased a white guild sg a bit inspired by your white sg and kim thayil doomy riffs. think i'm on deck for an fu-2 to go with it

[@FuzzlordEffects]

Badass!!!! Guild SG has got to be awesome!

[@dogehellkitty2926]

Would love more of that micro pog clean tone!!!

[@FuzzlordEffects]

My favorite clean tone ever

[@dogehellkitty2926]

@@FuzzlordEffects yess it is beautiful

[@MegaPrice3]

Thanks Jason, I guess that explains why you didn't want to make a FU-2 with the Vlad graphics!

[@FuzzlordEffects]

Cheers!

[@jeremieloisel-payette7882]

Greetings from montreal. I really like to stack a eae longsword into an abominable electronics throne torcher and into a green russian muff for different drives tones !

[@FuzzlordEffects]

Badass!

[@profile1251]

What was that arpeggio riff played first, it was really nice

[@FuzzlordEffects]

Just something I have been working on

[@Defekcija]

I'd love to hear this on a 29.75" or a 30" baritone guitar tuned really low.

[@BlackClawDoom]

Such an awesome board man 🤙 I'm planning on buying an Orangr CR120 pro because I'm poor as fuck so it's an amp within my price range. So I'm wondering would the model fet be a good add to my board to run at the end of my chain like you to help fatten up the sound of that amp? Cheers.

[@FuzzlordEffects]

Lots of amps in that price range, used Laney AOR always a good one! When I had a CR120 I can’t remember if I used a FET120 with it or not sorry!

[@BlackClawDoom]

@@FuzzlordEffects unfortunately good cheap gear isn't always that easy to come by in the uk, and by the time you ship something over from the u.s the shipping adds another 100-200 to the price and then it's no longer cheap lol.

[@red240red2]

New too doom and stoner rock. What are some Kool atmospheric doom bands to check out? Started using a octive fuzz on my axe fx and I'm hooked!

[@motograter2011]

Awesome brother

[@FuzzlordEffects]

Cheers!

[@gaetanasusani6350]

GRANDE Jason!!!!!!!!!!!!

[@FuzzlordEffects]

Gracias por vernos!

[@jjg5193]

Yeah. That’ll do. Thanks for that.

[@FuzzlordEffects]

Cheers!

[@ShewolfOvDenver]

Greetings from Brooklyn, NY! That Drone Master is lovely and I didn't realize Does It Doom is making those Tolex boards, absolutely getting one! Personally I've been combining the Fuzz & Burn by Minotaur Sonic Terrors with a number of other fuzz pedals and the results are thicker than an asphalt milkshake. Lastly, a question: how often do you find the need for shielding to mitigate noise coming from germanium transistor pedals? Even without a daisy chained power supply I can hear noise from mine pretty easily, even the occasional radio transmission. Thanks for all the goodness

[@FuzzlordEffects]

Yeah he just started offering them recently! As far as noise some of those circuits are just more prone to that than others. Humbuckers may help!

[@ShewolfOvDenver]

Hmm, I just recently got an Epiphone G 400 that's entirely humbucked and it can still get pretty noisy. Guess that's par for the course with germanium?

[@oloftorvaldson6224]

Everything is great. Thanks. But one question - why camera mostly on host? Because I can't see what he show exactly on pedalboard))

[@FuzzlordEffects]

Board fairly easy to see, I think it my luxurious gray beard that is distracting you a bit. Livin that lavish gray beard life

[@dan.miller35]

Gah, I keep trying to not buy a ModelFET and you're not helping. South Carolina here. I do think I need to put a MicroPOG back on my board. I switched to a SubNUp a while back to save on size but I don't think it sounds as good. My favorite pedal is probably a tie between my Caroline Guitar Co Shigeharu and my IdiotBox Effects Whores. Fuzz Freq. 2 totally different fuzzes but each adds it's own flair. Also, my board is kinda modeled after Christian from Whores' board. I'm running my dirt pedals through a 2 loop switcher (One Control white loop) and have one loop for medium gain or OD and the other for the super heavy stuff.

[@FuzzlordEffects]

It’s a cool pedal!

[@drdfx159]

Great starter for 2020 ;) I really loved the Modell FeT, and the Doom Screamer is an interesting approach too. Also I was hoping for a delay/echo, so was happy to see the Dark Master. We play more like a psychedelic stoner kind of music with my band, so I have less gain on my board, my favorite is my own 8Ball pedal that is based on the Keeler Push OD. I also love my Phase 90 clone, one pedal that I would definitely not leave out of my board. I love your board, especially the way it is made quite uniform. Only the tuner and the Micro POG stick out quite a bit. Haven't you considered to change them? I would recommend the Korg Pitchblack as a tuner, I love mine, as for the POG... That is a harder nut to crack, but you could maybe rehouse it? That is if you want a more uniform look for your board ;) Anyways, üdvözlet Magyarországról and I'm waiting for the next one (could be maybe another episode for "what guitars to use for doom"...? Another interesting topic is speakers and cabinets. They influence tone so much, yet people seem to overlook this topic quite often.)

[@FuzzlordEffects]

All great ideas cheers!

[@Psyfonify]

Hey, i think multiple (or infinite?) pedalboard vids would be sweet, cause theres always so many ways that it can be done haha. Like i know there was already a doom pedalboard build so, this is cool, just sayin, keep rockin

[@FuzzlordEffects]

Cheers!

[@Makiruot]

Drone Master + Model FeT =

[@FuzzlordEffects]

Cheers!

[@y7r1um]

Watching from Tallinn,Estonia

[@FuzzlordEffects]

Nice!!! Cheers from Oregon

[@hh239-73]

Was about to be the FU-2, but it's out of stock.....

[@FuzzlordEffects]

They tend to sell out same day as we re stock. They will be available this Saturday at 3pm EST

[@kinglizard2587]

Any plans on doing another amp build?

[@FuzzlordEffects]

Hope to build myself one sometime this year

[@elliotedlund591]

Man, i love Paddle-Boards! :))

[@FuzzlordEffects]

Happy for you!

[@FearFrost]

I think I need an octave pedal now... Idea: tube amp maintenance maybe? Halifax ns canada

[@FuzzlordEffects]

Like tube replacement?

[@FearFrost]

@@FuzzlordEffects check burnt out tubes, replacement, match ohms via cab and head, letting it warms up....

[@adamallie1043]

Just recently discovered your channel and just got into pedals I have use a big muff and a abominable hail Satan. I'm from Sioux falls SD

[@TonyHookedonVanlife]

For a non-fuzz(perish the thought! LOL) stoner-doom tone, an old school DOD 250 into an Orange-something w/greenbacks is hard not to love.

[@FuzzlordEffects]

Totally!!!

[@treefeelerDE]

Hey thanks to Fuzzlord for a guide of a pedalboard in this genre. its hard to find settings/tunings for gear in this genre of doom stoner. thanks for that. besides that especially this example of pedal settings is not my lovely sound but i get a lot of important informations out of it. my question is how can i compress my baritone guitar sound better ? in my band we have the issue that our sound is to wide and not compressed enough. but i dont know which compressor is good for us ? maybe someone can help. we have a Drop-A tuning on both guitars and the bass one octave lower. which pedals we need to get more compressed sound like DOPE SMOKER for example ? lovely regards to all doomers .[],,[]

[@omarinman3380]

Yo I’m from East Stroudsburg PA my board has a Darkglass Fuzz Duality ProCo Rat Blackarts Toneworks Black Forest Dunlap 105Q bass wah DOD Gonkulator

[@myguitardidyermom212]

forget your brand of velcro, where do I get one of those DoggO))) stickers???

[@FuzzlordEffects]

🐦)))

[@thisisours1]

Hi from new zealand, just wondering why you dont run the pog and dark master through the fx loop?

[@FuzzlordEffects]

Amp set pretty clean and dirt pedals before it so I just wrong straight into front. Usually want tone effects in loop when using lots of amp gain as far as I know

[@WrathVictory]

I want all these pedals :)

[@FuzzlordEffects]

Cheers!

[@DestinationUnknown4x4]

I'm curious how much he is asking for those does it doom pedalboards?

[@FuzzlordEffects]

Should be info on his website

[@DestinationUnknown4x4]

@@FuzzlordEffects It's not but I hit him up and he said he's working on another batch

[@oldskull70]

Hi Fuzz lord! Could you please explain why did you put a distortion before Void Master ? What’s the level of Volume did you set? And final : are you using some noise gate ?

[@FuzzlordEffects]

No noise gate, just what you see on board

[@dogehellkitty2926]

Hey man is it possible to see the settings for the micro pog?

[@martinorazza9325]

Why not to make a series about how to properly setup your guitar/bass for Doom Metal? Cheers from Italy bud!

[@mikowl5713]

kzbin.info/www/bejne/lWK9lZx4mauma7s

[@FuzzlordEffects]

Thank you 🦇

[@tylerclarke5591]

A lot of these pedals remind me of Tool’s aenima album for some reason

[@jetaimemina]

Is the riff at 7:54 one of your own songs? It's awesome!

[@FuzzlordEffects]

Yeah check out Fuzzlord - Refractor on Spotify and iTunes 🤘

[@almostliterally593]

What do you þink of a ſilicon mini blue fuzz face?

[@XbotulinumX]

Can you make a pedalboard for electric wizard dopethrone? And I’m from North Carolina! Greetings from the Carolinas

[@FuzzlordEffects]

Pretty sure a legit dopethrone setup is a TU-2 tuner and FZ2 taped to floor 🔮

[@schindlersfist8839]

Why are there so many pedal companies based in Oregon?

[@FuzzlordEffects]

Not sure but maybe they can start making videos also haha