Dorman Speed Bleeder Review and How to Install Tips!

I've installed the M7-1.0X32mm version that fit my Nissan Sentra B16 2007 rear brakes: extrafudge.com...
Front brakes are: extrafudge.com...
I also recommend either using a rubber hose to collect the brake fluid or have it collect on a disposable rag. In this case I wanted you to see the fluid stream.

[@ureviews]

I've installed the M7-1.0X32mm version that fit my Nissan Sentra B16 2007: extrafudge.com/ref/B000C5I1UO Front brakes are: extrafudge.com/ref/B000CPCOAM I also recommend either using a rubber hose to collect the brake fluid or have it collect on a disposable rag. In this case I wanted you to see the fluid stream.

[@nodnarbz_1327]

Also a good idea to not get corrosive brake fluid all over everywhere. Put a old vacuum line or clear tube on the nipple for no mess 👍🏽

[@ureviews]

Agree

[@Nuke21]

Look at the threads dude. They are precoated. You don't need to - and shouldn't - add teflon tape to them.

[@ureviews]

I think it's a good idea to make sure you don't get air bypassing. Do whatever you want.

[@Cantsaydog]

Yeah but you used white Teflon tape when you should use yellow whites just gonna dissolve in cause you’re a bunch of problems they’re already coated wow