Drag Mini Bike Build Ep2

Today we finish up the Drag Mini Bike Frame. Stay tuned to next weeks video where we test our build and get it closer to paint. Don't forget to like, comment and subscribe for more!!!
Parts Used In This Build -
Engine Parts -
Ported & Milled Head - goo.gl/3Rzrta
196cc, Tillotson & Clone Stage 4 Kit - goo.gl/rpwj1d
Predator Hemi 212 Stage 4 Kit - goo.gl/Z95uc6
Predator Non-Hemi 212 Stage 4 Kit - goo.gl/xhnvHq
3 Disk Race Clutch - goo.gl/1U6DUq
12 Tooth Sprocket - goo.gl/zFNuWD
Top Plate - goo.gl/EHHzof
Catch Can - amzn.to/2CZFU2j
Bike Parts -
Engine Plate - goo.gl/b9jgKj
Flip Engine Mount - goo.gl/ek2pWv
Pegs - amzn.to/2WAeqcL
Front Wheel - goo.gl/c9EpGV
Front Wheel Hub - goo.gl/3suuzE
Front Tire - goo.gl/owzBb6
Front Tube - goo.gl/UQnC3S
Rear Tire - goo.gl/jUUvuT
Rear Rim - goo.gl/1Ebgoa
Rear Wheel Hub - goo.gl/RKm9nn
Brake Disk - goo.gl/eqBa1V
Brake Disk Hub - goo.gl/4oHh3x
Sprocket - goo.gl/iv6Hmi
Sprocket Hub - goo.gl/t9kn1D
#35 Chain - goo.gl/my7MUN
5/8” Front Wheel Shaft - goo.gl/mg9QHg
1” Axle - goo.gl/4vqxkF
Axle Bearings - goo.gl/GPKbGY
1” Collars - goo.gl/VvMiyS
Lower Fork Collars - amzn.to/2CZEiph
----------------------------------------------------------------------------------------------------------------
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - goo.gl/V9dHPp
Everlast Welder - goo.gl/8DRgZe
RBG Sticker packs $15 (Includes 4 stickers)
Paypal.me/redbeardsgarage include your name, address & what you're sending money for.
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Snap Chat - redbeardsgarage
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Google+ - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
-------------------------------------------------------------------------------------------------------------
Check Out Go Power Sports for all your Go kart needs!
goo.gl/OoWVDK
-------------------------------------------------------------------------------------------------------------
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts

[@richardsellers71]

Man! I just graduated from welding school, that table is F’N SWEET! I love where y’all are going with your channel, keep doing God’s work and he’ll keep you working! Congrats on all your new success!

[@fashionableu5891]

Please send me a link for The fork assembly

[@silkcustoms520]

Why haven’t I welded anything up yet ???

[@Str8sixfan]

That's a dang nice welding table. Some day. I'm excited about this build. Love the look of the stretched frame.

[@technerdy]

think i could hang out here all day lol love the humor rolling

[@reidmiller4626]

Great Video!

[@jman6030]

Looks good

[@bigdawgsbusa2]

Kool build brother I love fab work and can never get enough.

[@mten8965]

Nice-looking bike thanks for the video red👍😎

[@jeremyware174]

The brotherly love in the RBG garage I bet off camera he gives you some lip on those welds

[@danbeacham6401]

That's an awesome fighting build

[@wannabebraap6944]

Where is fired me so much I just filled my foot first minibike for the 212 mL predator thank you so much love your videos keep going fast down that dragstrip

[@daviddavis5312]

Excellent as always

[@bradleyeason3511]

Drag mini looks awesome. Like watching your videos. Was hoping to see on on wiring a light to a battery on mini using a voltage regulator. Have been looking for one on KZbin.

[@leebee1295]

Awesome Work...

[@ebuff57]

Looks great!

[@kingavegarage8722]

ITs coming along, I'm glad you cover almost every step from beginning to end. Its great to see a project come from nothing.

[@teejizzleadams1275]

Y'all should build a frame jig around it so you can make more, I know you're gonna make 2 of them but you'll have a frame jig to make more and sell them, RBG's custom frame shop

[@markferguson4255]

Aways fun watching your builds from Australia.

[@kmikem78]

Hey great video! You guys are what makes youtube so great. People just doing what they love and sharing it.. I love watching you guys build things I can eat popcorn and watch for hours haha. Love the build on this bike its looking kinda like a chopper.

[@ciscochacho1751]

WOW, I'm GONNA start a hobby of building miny bikes just for fun. I am Learning a bunch from you guys mainly You l.o.l. Thanks man.

[@nicefellow787]

As long as this bike is I think you could mount a small block Chevy on it.

[@jllovellette]

Really can't wait to see finished product don't take too long now.lol

[@27Zangle]

Used to bend metal to custom weld (mostly aluminum). My shop had a hydraulic tube bender and they taught how to quickly find the angle with a special tool (this tool is homemade and easy to make). I would bend my first piece and write down the degrees to insure the next one is exact since the bender would electronically tell you want angle you are at. Makes life so much simpler.

[@joshuarogers5233]

I always love you're builds! 👍

[@jeffshearer5125]

Gonna be killer.

[@evilbeetlekustomscreations4965]

Nice job!

[@davinkeittfishingd.k.frebu1393]

Great job I have to edit my mini chopper build

[@mingusbreeze]

Thanks, guys looks like fun.

[@martygp266]

Looks fantastic. Pleasure to watch and can't wait for the reveal.

[@dedipolikul5513]

assalamualaikum, mahakarya yang baik salam dari INDONESIA

[@elesjuan]

Damn. I need to buy a tubing bender. And a bigger welding table. And a bigger house that actually has a garage/shop. This thing is awesome man!

[@SportbikerNZ]

Looking good. Enjoying your vids.

[@ysfdd3805]

Y'all should put a wheelie bar on it but either way it's pretty sweet

[@danmidkiff5416]

Can't wait to see the end product. In the video, when you jump from weld to weld, the noise sounds like my cat farting!!

[@sweeneysweeney1901]

Love the larger front wheel👍

[@LuchMobGarage]

Stretcheeeeeeed 🤘🏻🐿🤘🏻 goood stuff bud

[@lloydpowell8923]

Hell yea nice frame can't wait to see the lite wait version

[@stephaniehart8241]

Looks nice

[@obiwan1062]

This ones gonna rip, nice frame work. Look forward for the next video

[@silentdeath9237]

Once you have a frame built you should build a jig so you just lay in your pipes clamp them and when all are in place start tack welding then do the full weld it would speed up your process 60-70%

[@brandonrodriuges1094]

I really love your content

[@steveroach6043]

Didn't know keep up the good work you guys are awesome

[@overdrivegokarts6849]

Looks nice man

[@NICKSSHOP]

very cool

[@drewtooker4243]

Looks like that frame will be big enough to fit a big block in the future. Will it ever get a built 420 or a duromax 18hp motor?

[@froggersgarage5127]

That would be sweet

[@468delray]

you might want the handle bars pointing more straight out then pointing in/back. you will have more control of the steering at higher speeds. if the front tire starts to dance? your done.

[@RedBeardsGarage]

Going to use a steering dampener on it

[@468delray]

@@RedBeardsGarage good,that will help.

[@468delray]

hey , if you every deicide to actually drag race it. maybe think about road trip to symco wis. they drag race 125ft on clay track. last summer(august) they had 105 bikes and 5 classes. they make a hoosier tire with grooves cut in them for clay surface. Friday is a test day and Saturday race day. contact chris nelson Midwest 608 mini bike ,facebook.

[@bighomieJ5X]

Hey RB ,what are your powerplant ideas? And mph goals ..id say built 420 with huge slide carb. And if your gonna use a torque converter change the spring & weights on the driven pulley. No1 on KZbin does that even with built motors..

[@jhitt79]

Cheap or expensive tubing notcher, it doesn't matter. You should slide the part that holds drill arbor as close to the work piece as possible. You want as little deflection as possible.

[@larrycoleman8298]

I agree with Mullin performance more of a mini chopper than a mini drag but still bad ass I like it it's a shame we don't live closer to each other cause I have a real sweet mini drag bike

[@shanesgarage1105]

As always great work, love the build. Keep it up.

[@geoffolson2939]

👍👍 bout time lol I won't beat the dead horse anymore

[@budzy9369]

Hello from briceville tennessee

[@ups3357]

That is gunna rip!

[@coryturk4050]

Love it

[@johnelledge6685]

Freakn awesome!!!!!

[@cadillaccrow808]

yall should put a 670 on that thing it would be bad ass

[@davekimbler2308]

Low and hot ! Ya might need a jackshaft otherwise your chain will be 10ft long !

[@michellebarnes5261]

670 Turbo drag bike

[@keithlong3129]

Sweet

[@williamwayman441]

Howdy Mr. Beard, just wondering where you got your tubing notcher from

[@MRT_H]

Looks like a jd2'd. Purely guessing. I'm sure some keyboard fabricator will correct me though. If not, jd2'd notchers/benders are awesome imo.

[@nzzs203]

Just guessing, but I've noticed he gets everything either from HF or Amazon. Could start there with an internet search with the model mentioned above ☝️

[@overdrivegokarts6849]

das nice

[@SKYENET-zy2cn]

You might have to do wheelie bars too. But the Bike looks sick so far. 👍🏻

[@Firebird_876]

1st. Notification squad where y’all at??

[@frederik.h.n9502]

It could be freaking Amazing to see If you could use 2 torque converters with 1 Engine to see If it would increase topspeed and acceleration

[@theone9475]

so much room on the frame drop a 670 on that bad boy

[@martinduddridge329]

How’s the engine oil doing with that tilted mount? Between that and g force on launch it must make it marginal. Nice build with some neat ideas.

[@CainSample]

EPIC! ✌

[@duanewhite3184]

Use some cutting lube it will cut faster and help save the bit.

[@andrewjohnson4]

Are you going to use a manual clutch on it

[@MullinPerformance]

More of a chopper than a drag bike but should still get the job done.

[@mattproud8898]

You should put a dirtbike engine in that like a built 125 or 150

[@drewalsup9200]

Its kind of weird using a live axle on a mini bike. Usually on motorcycles your just spinning the wheel with the sproket and the bearings are in the wheel. Makes the frame design easier for the dropouts since you wouldnt have to incorporate the bearings. And less rolling mass.

[@MRT_H]

I used a live axle setup on my quad engine mini bike. Works just fine. But I agree a standard motorcycle setup would make more sense.

[@Baldys_projects]

Hell yeah bud 💪💪

[@RexSmithII]

the tube between the two triple trees in the steering, what size ID and OD is that? I think you are using go power sports 5/8" bearings there!

[@ramiroramirez6995]

Question. Thats a nice frame for the bike. Do yall se the frame?

[@anthonymazzetta2841]

Needs a 670 for sure

[@ryanrohauer5940]

That thing better get a big block it's going to be way to heavy for a small block

[@2guys1RC]

Cant wait to see it run. would look awesome with some cool fairings on it

[@fredjackson4063]

I can see some custom orders coming in real soon RBG!

[@matt3x37]

You should put the foot pegs at the back of the bike so you can lay on it like a real drag bike

[@playinwithfirecustoms7954]

I've got a couple of opinions on this build...first, I'm diggin it... mostly, BUT, (here come the opinions...and you know what they say about opinions...) I think the seat should follow the line of the frame, and you should run clip on bars...there's my 2 cents... 😂😂

[@larryrenard8125]

Looking assume

[@cameronm1445]

I love the videos man just subscribed a couple weeks ago and I can’t get enough

[@P3mpi]

Nice build. What size tubing are you guys using?

[@citicospeedshop3739]

Red beard I love you

[@nicksluder4764]

Man I just looked at those tables online bc I really want one but dang they are pricey haha they look really nice though. Great content btw, love the vids 👌🤙

[@bryduhbikeguy]

That looks Awesome ! You going for'Blue Streak',or 'Reds Rocket' colors?

[@RedBeardsGarage]

It's actually going to be white and green

[@lactosefarts7963]

You should put clamp on grips for it

[@howtoguroo2686]

RED , WHERE DO YOU BUY YOUR TUBING AT. ?

[@RedBeardsGarage]

A local steel company

[@froggersgarage5127]

I wish I had one my hardwear stores don't have much to pick from

[@mark-gi9nq]

What happend to the 28hp Briggs you guys bought a while ago?, you should put that one if you still have it!

[@fabianmurray7230]

I was thinking for a drag bike wouldn't you good pegs need to be in a different position to get maximum aero ?

[@luislopez5523]

Do you think you will put a parachute on it?

[@andrejohnson1771]

How can I get a frame like that.

[@joker2919]

Would you be able to build a Yamaha XS 400 from the ground up?

[@t2nate137]

God bless

[@samiam917]

thats one nice a$% welding table with the clamps and such! Did the clamps etc come with it?

[@RedBeardsGarage]

The same company sells a clamp kit but it doesn't come with the table

[@thejohn7821]

how long until the predator 420 gets dyno'ed?

[@DaleDayTheBigDayDJ]

Needs a 670 after seeing the size of the frame

[@ryanrohauer5940]

No just a high compression big block fully done up an alcohol it could make 50hp there are BB mini drag bikes that run 7s

[@DaleDayTheBigDayDJ]

@@ryanrohauer5940 but a 670 has that v-twin sound

[@biggusdickus666]

Where is Red Beard's Garage? In the south somewhere?

[@rawrap9781]

How much for one of those drag frame and where are you located? ? got to get me one

[@nathanweaverfarmscreutzbur958]

999th like