Dragon tumbler. 3D dragon tumbler. 3D tumbler tutorial.

[@Septina-s1x]

You're speaking my language...I just learned how to make the dragon eyes by watching videos...this was going to be my next move..Thank you for sharing this tumbler...❤❤❤❤❤❤❤

[@ItsACraftThingAlishaVirgillo]

@@Septina-s1x you're welcome 😉

[@chanalowenthal3897]

Oh I have to try this for my daughter and her husband.

[@jessicablake2870]

These tumblers are amazing! I see this video is older, but I'm just running across it. I'm so glad I found it! What color did you use on the eyes of the black and red one?

[@ItsACraftThingAlishaVirgillo]

Hi! Thx. Red and yellow.

[@jessicablake2870]

@ItsACraftThingAlishaVirgillo Thank you for your quick response!

[@ItsACraftThingAlishaVirgillo]

@@jessicablake2870 your welcome 🤗

[@tinahaynes175]

you've got a little artist on your hands!! Encourage her!!

[@ItsACraftThingAlishaVirgillo]

Yes and I do. She amazes me. ❤️😊

[@akarph]

Once you've attached and painted your eye and claws, do you seal it and cover with epoxy?

[@ItsACraftThingAlishaVirgillo]

Yes but with a very thin layer and I apply it with a brush so to avoid the epoxy from pooling.

[@akarph]

@@ItsACraftThingAlishaVirgillo Thank you. I didn't use the vinyl wrap, I actually used the bubble method, but using a brush will be good to make sure all the knicks and crannies around the eyes are well covered.

[@ItsACraftThingAlishaVirgillo]

@@akarph yes, either way, applying the epoxy using a brush works great for that. Then clean your brush with 91 percent alcohol or acetone.

[@akarph]

@@ItsACraftThingAlishaVirgillo Will do! Thank you so much!

[@COREENABONIN]

Thanks for the inspiration! I love how this turned out. Inspired me to try my own idea.

[@ItsACraftThingAlishaVirgillo]

Awesome!

[@sworley1956]

Where did you get the black pattern for the other cup? Very nice❤️

[@ItsACraftThingAlishaVirgillo]

The same place I got the pink one.

[@sworley1956]

@@ItsACraftThingAlishaVirgillo which is??

[@ItsACraftThingAlishaVirgillo]

@@sworley1956 or sorry. It's linked in the description. It was a dragon scale bundle from Design Bundles.com.

[@sworley1956]

@@ItsACraftThingAlishaVirgillo OK thanks sorry I miss that

[@ItsACraftThingAlishaVirgillo]

@@sworley1956 no worries 😉

[@craigtreece8179]

How do you wash the cup after use?

[@ItsACraftThingAlishaVirgillo]

Same way you want any cup. Warm, not hot soapy water.

[@jenniferoerkfitz3519]

Beautiful Tumbler! Best dragon I have seen! I just wanted to comment in the UV resin... The more you agitate the UV resin, the longer it takes to cure. Straight out of the bottle without any manipulation, it cures in 20 seconds. Often it is tachy even though it has cured. Just give it a rub with alcohol. But that UV resin is really the best one. Thank you!

[@ItsACraftThingAlishaVirgillo]

Thank you so Much for that tip. Glad I'm using the good stuff 😊

[@yolandenichols]

Hi Alisha - What if anything did you add to the black one? I love it! :-)

[@ItsACraftThingAlishaVirgillo]

I didn't add anything to the black one because it was for a male and he didn't want glitter it shimmer 😃

[@yolandenichols]

@@ItsACraftThingAlishaVirgillo Thank you! I really enjoy your channel. :-) I need to find those tack it cloths!

[@ItsACraftThingAlishaVirgillo]

@@yolandenichols ty 😊. Amazon.

[@melissahunt18]

HI! Can I ask where you got your dragon eye mold and what resin do you use in it?

[@ItsACraftThingAlishaVirgillo]

Hi! I purchased the mold from Etsy and I use Super Clear epoxy which I get from Amazon.

[@honey562012]

These are gorgeous and you gave a lot of instructions to explain why you did what you did. Thanks for sharing.

[@ItsACraftThingAlishaVirgillo]

You are welcome 🤗

[@PRISSIEBURTN1212]

WOW !!!!!! She's good !!!!! Great Aria. Great video.

[@ItsACraftThingAlishaVirgillo]

Thank you :). Yeah. She's got talent. I'm such a proud mom!

[@catlogan4711]

I’m sorry, but I’m still learning all of this Cricut stuff and I’m lost! If I order this dragon design, does it come ready to put on tumbler? Or is it digital and I have to print it out?

[@ItsACraftThingAlishaVirgillo]

Never apologize! We all never stop Learning. This one is a digital DL and you have to print it out.

[@lindsayslovelycreations320]

These are absolutely stunning!

[@ItsACraftThingAlishaVirgillo]

Thank you 😊

[@You_said_what1]

Absolutely amazing! Damn, 30% off. Ur awesome!!!

[@ItsACraftThingAlishaVirgillo]

Ty 😊

[@debbiesmith6703]

Wow😍love it!.....I hope i can make this, I'm switching over to CrystaLac Brite Tone....the Epoxy sent me to the hospital. I was wearing a respirator mask and 2 pairs of gloves and sleeves with elastic bands on to keep the sleeves down.I was so careful but omg what a mess! Anyway Im done with epoxy. Brite Tone is safer and no ppe , except when sanding or spray painting, and you can use it around children and pets. This was the second time the epoxy did that too me. The doctor's advice was STOP USING EPOXY. Well I still want to make tumblers and other thing's so I'm switching to CrystaLac.The order should be here tomorrow. I will let you know how it turns out as I love crafting and I had to find another alternative. Cheers☕from Ontario Canada. Be safe😷

[@ItsACraftThingAlishaVirgillo]

Omg! I'm so sorry to hear. Yeah definitely let me know how the Crystalac works. I want to try it.

[@debbiesmith6703]

@@ItsACraftThingAlishaVirgillo your daughter is a little Artist in the making. I watched the video 3 times and i must have missed her but shes got it going on for sure!!And i love love love the music! Cheers☕

[@ItsACraftThingAlishaVirgillo]

@@debbiesmith6703 Cheers!

[@jeridawnchamberlain7327]

I love this video watched it all. If I made one id have to just make for myself cause its so much work it would be worth 100$ lol nobody wanna pay and it looks so awesome that id keep for myself. U rock I love it.

[@ItsACraftThingAlishaVirgillo]

Lol thank you. They were very hard to part and others I made as well. Go ahead and treat yourself! It's so worth it. 😊😁

[@jeridawnchamberlain7327]

@@ItsACraftThingAlishaVirgillo how much did you sale them for a piece or set cause not sure how I did. I love them but I just don't think I have enough patients I can paint I mean I can if colors are already picked out and have instructions or image to go by but just going off of my head I'm not that creative like that, I really wish tho cause I love to craft and it would make my life easier. Definitely gonna keep watching it videos as I learn alot Everytime. And I had the lamp for my first too and I hated it I have a flashlight called Dulex and I'm in love it literally 5 secs and bam I think it was time 20$ on Amazon but worth every dollar. I also use UV resin from DecorRom and it's the hard but I'm 8 months pregnant and b4 I used another and it smelled so awful but the DR brand has no smell well a faint resin smell but without mask it's not bad at all hardly smell anything with mask I smell nothing. And dries very quickly with the dulex light, so if u do wanna continue to use I recommend them. And thank you for taking time out of ur day ur life to share these videos with us, we all appreciate them tons. So keep up the good work and have fun!!(:

[@ItsACraftThingAlishaVirgillo]

@@jeridawnchamberlain7327 ty for watching and your support. Congrats on the baby! I'll have to check out the resin. I use a UV flash light now that works much better. If you have other questions you can also message me on FB or IG. Happy crafting! 😊

[@mies.1742]

Absolutely stunning. Wow! By far the best dragon tumbler I have ever seen. So impressed, I ordered the mold and materials. Love your page.

[@ItsACraftThingAlishaVirgillo]

Thank you so much! Post a pic when your done. I'd love to see it.

[@shannonvincent3710]

Where do you get the mold?

[@ItsACraftThingAlishaVirgillo]

Etsy

[@heatherspicer3784]

Where can I buy this? I only see a link for the mold not the finished cup. Do you sell them?

[@ItsACraftThingAlishaVirgillo]

Hi Heather. I don't have a shop. Usually people just contact me through FB if they want to place an order. If you don't have FB you can email me at [e-mail]

[@AP-hn3yl]

LOVE THIS!!! was any mica powder used on the black and red cup?

[@ItsACraftThingAlishaVirgillo]

No. I did not use any mica powder on the black cup. It was for a guy and he did not want shimmer on it.

[@deborahtinagullinelson852]

Hi, I have a question, I really love this method and I have purchased the SVG of course it's too small to put on a tumbler, so I heard how you said you sized it on Word, but how exactly did you do that? I have been trying relentlessly to size and it keeps printing the same size over, and over again. I wasted so much paper. Do you have any pointers? Thanks in advance, Tina

[@ItsACraftThingAlishaVirgillo]

Hi Tina. I guess it is a bit tricky but first I change my page layout to landscape. Change all margins to .5. I import the image. I size the image as 8" by 9.33. When I print, I will get a message about the margins but I ignore it and the full image prints. I hope this helps. If not, I'll do a video to walk you through it.

[@deborahtinagullinelson852]

@@ItsACraftThingAlishaVirgillo Thank you, I was about to lose my mind lol

[@ItsACraftThingAlishaVirgillo]

@@deborahtinagullinelson852 did you get it to work?

[@deborahtinagullinelson852]

@@ItsACraftThingAlishaVirgillo I Am actually working on right now

[@judith7]

Question ? How long did you leave the dragon eye mold on? I just got my mold today 🥳 I will start my tumbler soon🙏🏼

[@ItsACraftThingAlishaVirgillo]

Overnight.

[@judith7]

@@ItsACraftThingAlishaVirgillo like 12hours ? Thank you 🤗

[@ItsACraftThingAlishaVirgillo]

@@judith7 yeah, like 10 to 12 hours.

[@carriemcarthur2121]

I love this cup and tutorial. I really Ike the idea of printable vinyl too! What kind of printer do you use?

[@ItsACraftThingAlishaVirgillo]

Thank you 😊. I have an HP printer.

[@joannewilson384]

I ordered one in purple. Looking forward to getting it. Great tutorial Alisha.

[@wilmawilliams8768]

Getting up the nerves to try this,I love this,but I can't tell if you are just using the mica to adhere the small specks of glitter on the second half of video

[@ItsACraftThingAlishaVirgillo]

I use tack-it glue when placing any glitter or mica down. Sorry that I wasn't clear on that.

[@lorenajimenezlopez471]

OMG!!! Love these tumblers. Absolutely gorgeous! I'm the newbie on the FB group and really am grateful and thank you for sharing your KZbin channel info with me today. I've subscribed to your channel now and will most definitely be checking out your other vids. 🥰

[@ItsACraftThingAlishaVirgillo]

Thank you and you are very welcome. Welcome to the group. We are glad to have you. ❤️

[@judith7]

Just wow !!😍

[@heatherdeal9714]

Awesome!

[@aundriachaboya6583]

Question…. I’ve been doing tumblers for a few years and you gave a real informative video but you do have a lot of newbies watching and I noticed your daughter and pet come into the space. Are you using your PPE and is your daughter cuz eventually resin will cause health issues. Just wondering?

[@ItsACraftThingAlishaVirgillo]

I do not allow my pets in my craft space. Yes on occasion they do sneak in. They are not allowed to stay in there. My daughter is not working with me when I'm dealing with epoxy. More recently I have a new space where I do all of my epoxy work down in my basement with high ventilation but again she's not down there when I'm working with a epoxy. Thank you for your concern.

[@sueglossop2732]

Love this! Thank you for sharing! I'm a new subscriber 🙂. When you say we can use sublimation files to print on vinyl, does it have to be printed with the sublimation printer also?

[@ItsACraftThingAlishaVirgillo]

Ty Thank you for subscribing. No you do not have to print on sublimation. Just print on printable vinyl

[@katieprice4201]

I'm so glad I came across this video

[@dianesevilla8633]

Omgosh I love them...do you sell these?

[@BNDesigns72]

This is so awesome

[@PRISSIEBURTN1212]

One is feminine and one is masculine

[@ItsACraftThingAlishaVirgillo]

Yes

[@robinhanff4248]

Pretty darn cool!!!