What More Could You Ask For?! Holybro H7 Flight Controller & ESC 🤑

[@DavidTechEs]

Yes please! Build it!! Can’t wait to see it. I was just thinking to buy this stack for my next build. Great video as always bro!

[@SquatchWerks]

Planning out all the bits for my 5” build - may have to go with one of these. I like the idea of plug and play with the digital unit. Thanks man!

[@KrotowX]

Those ESCs look totally metal. I want one of these stacks. Had quite good experience with Kakute FCs in past. Atlatls VTXes though burned few in row, but FCs and ESCs was always solid on 4S. I hope that on 6S they will still work the same.

[@sleepyheadfpv1507]

The all metal esc is the best hands down

[@Mikebfpv]

Looks awesome. What I'd like to see, is you putting all 8 of those motor outputs to use. Build a cinelifter! Edit: with dji preferably.. 🤘

[@gtaitbiz7787]

This vs the mamba, which is easiest for beginners?

[@waltj2640]

So if your not using DJI controller you will need to remove 2 wires from the Air unit to FC plug correct?

[@WrongWayFPV]

Are you gonna do anymore ESC torture tests?

[@sleepyheadfpv1507]

I’m dropping the f4 esc mini and the mini H7 in my Kopis pusher

[@danialfpv]

Build, build, build video, Mr D! 🤘😜. (Cinelift 🙊)

[@lmfdjtiko]

Great stuff drainman!!

[@superseaner]

Great job man!

[@gtaitbiz7787]

Can this be powered by a LiPo?

[@nickyhart5553]

Can you wire a holybro ublox m8n gps module to the kakute h7 I read something on using the i2c and cutting a wire back thanks your videos have been a big help to me thanks again

[@godsun358]

I like holybro great vid

[@zira_fluff4105]

I'm late to this review. I'm an EE into drones and this is a masterpiece FC and ESC board. Going in my next build. Also - subbed - excellent video and thanks.

[@aidanfarley9566]

Im also an EE. I have this fc and 65a esc in 3 quads now. It's the best stack I have ever used

[@canigetachannel]

Thanks. Pretty stoked when I saw it. Gettin' the 65A full stack on the way, any day now. Should be a sweetheart, too. I'll let you know.

[@canigetachannel]

p.s. subbed too [wink]

[@md.m.8372]

I just had 4 of the same ESC's & 4 Matex 30x30 H7 FC's show up in the mail yesterday! Already got one into my main 7" & I can't complain 😅 Now the question is how long is it going to last? From the component choice & build quality of both hoards I'm confident its going to be a good long while 👍🏼

[@colter7300]

How are they holding up?

[@Krunked]

man those plugs are moving a lot when youre touching them.

[@godsun358]

Yes build it for analog

[@EdturdEnfart]

I feel like I’m getting really low lq on this stack do you know of anything like that with these boards

[@k4x4map46]

yup build it up analog will do just fine! great review!!

[@TheOuterDrive]

random question..Could i use a crossfire antenna as a ufl vtx antenna?

[@ksped1]

Hi DM: Great Vid just wish i saw it before getting the KAKUTE F7 HDV, would you know if it's possible to use a analog Camera on this board by using the wires from the DJI plugin or do I just wait to purchase a DJI unit, Thanks.

[@robert_g_fbg]

He pointed out the analog in & out solder pads. This H7 handles one analog cam. The Matek and Luminier H7s handle dual analog cams.

[@lokkiez]

Make a video of how to make a waypoint drone with obstacle avoidance please! =D

[@h2o40fpv]

Wow great video

[@quad55555]

will this be compatible to flash INAV to?

[@HolybroLimited]

Soon!

[@Tonkabollocks]

WOW! ; ) Why did it take me so long to find you? ; ) As many of us know H7 FC's have MORE than enough RAM to run FULL Ardupilot/iNAV/Betaflight etc. If I want to run: H7 (full Ardupilot): WITH DUAL/TWO HD air units and a digital air speed sensor in VTOL Wings, can you/anyone recommend a list of H7's FC's that can manage that?

[@fistedfpv2922]

worth the money, buy nice or buy twice

[@StR8KiLLA_FPV]

First good videos brother

[@cwwCADAVER]

Hum.. the ESC looks a little sketchy with another board soldered on it, with the heat flex and a few crashes I would be worried..

[@ІҬҎЅ]

The other board u speak of is the logic board and isolates the power delivery board and is a good thing to see. The V1 version of this esc had some issues but this is v3 or v4 I think and this esc is a monster. I have 2 of these escs and just purchased the H7 FC for a cinelifter i'am building. I also have this esc in a 5.5" cruiser and no issues. I wish it wasn't so expensive but if you look at the components its hard to scoff at.

[@bungle6334]

I feel like I'm missing something... Arducopter requires over 1mb, yet H7s are super rare compared to F7, especially F722s. Which only have 1/2MB which isn't even enough to run betaflight, correct? Why are F722s the most common in a landslide? What am I missing? I am building my first Quad, and I would like a MCU that is both futureproof and large enough to run any firmware. Being an engineer, ultimately, I want to develop a drone with new capabilities, such as the ability to self charge, automated patrolling, flir, etc -- so the extra I/O is also desired. Although expensive, H7 seems to be the way to go?

[@marinehm]

I love my Matek but, this looks awesome @2:12

[@mattraymond2935]

nice vid Fettech vs kiss ultra?

[@BaldmanFPV]

Are you getting these in stock?!

[@derrickmitchell39dm]

You think k our hobby will benefit from LiDar?

[@lalanediaz8095]

🤘🤘😎😎

[@Maorifpv]

Holybro ? No thanks

[@jeramboo8511]

Whats wrong?