Nice video, and of course nice bike! I have purchased the same model in 2021, which I can use as road bike too. How much height did you leave between the stem and the top of the fork (head of the expansion cylinder)? And which torque did you apply for the expansion cylinder?
@mikemono2 жыл бұрын
Around 0.5 to 0.7cm
@mikemono2 жыл бұрын
You need to really take care! Look where the position of the upper stem clamp is and measure it! Don't forget to calculate the cone
@vlahovicsamira70842 жыл бұрын
@@mikemono Thanks very much for your reply. Indeed the bike shop forgot to take the thickness of the head of the expansion cylinder and thus the ahead cap was in slight contact with the top of the fork. I cut the tube fork about 2-3 mm, it was a nightmare because I left the fork on the frame, as I did not want to remove the brake caliper. Now, it seems that my problem is solved, the stem doesn't move more. Thanks again!
@mikemono2 жыл бұрын
@@vlahovicsamira7084 true! That's a thriller... 2-3mm are so thin. You need a lot of concentration! Well done