Dream Reef Tank Build Series | Ep. 8 | My Custom Reef Control Board

[@PhotographyInFlight4183]

Dude just making us look like scruffs, outstanding work and execution. Respect.

[@deejay2606]

That is slick and very clean install

[@PetmaluLife]

Thanks man! I just recreated it for my new tank. I'll be posting a new video soon.

[@tplummer217]

That guys shop is nice. Great setup and nice panel!

[@cjdangles]

Wow. Just wow. Well done.

[@skyking9248]

Such a phenomenal build. You must be pretty happy

[@PetmaluLife]

Thank you so much! Glad you appreciate the build. Yes, I’m pretty stoked how everything has turned out. Excited to see how it progresses.

[@Utubereefer]

Looks like a NASA controller board! You found the right people for the job for sure!

[@PetmaluLife]

Thanks! Yeah, I'm pretty happy with the way it turned out. I have to build another one since it got thrashed when my tank leaked.

[@chilson88]

This makes my OCD explode with joy. Absolutely beautiful build

[@garrycole9187]

Really detailed and well thought out, something I don't think I could do myself. I am one of those guys who just hook up new equipment over the top of old one.

[@PetmaluLife]

Thanks you so much! I’ve definitely been taking my time with the build. It helps prevent me from making decisions I would regret on the future. Also, the more I take my time, the more my rock gets to cycle in my Brute. Thanks for your support!

[@andyhemsted4570]

Seriously impressive

[@PetmaluLife]

Thank you so much!

[@Nippa1988]

The work that has gone into that is amazing

[@PetmaluLife]

Thank you so much! I appreciate your kind words!

[@joshadam5518]

Hope you rebuild! Nicest thought out setup out there

[@fanhojm]

Great job...looks amazing

[@PetmaluLife]

Thank you so much! 🙏

[@rrrreefer9721]

Don't think I've ever seen such an under subscribed channel!

[@PetmaluLife]

Lol 😂 Thanks for watching. I hope you enjoyed the video. Help share the word. Maybe I can get more subs!

[@g-reef]

Absolutely amazing

[@PetmaluLife]

Thank you so much! I appreciate your support!

[@hawjfamily321]

Trying to set up my own personal control board. This video is great inspiration. Looks so clean.

[@paulmeneely]

Wow that is one impressive control board. Not to mention the whole system.

[@PetmaluLife]

Thank you so much for watching and for the kind words! 🙏

[@tricktaylor]

fine line between detail oriented and obsession...from a guy with all his equipment dangling under the stand over a pretzel of power cords.

[@jjamontan]

Wow, what an amazing job. Well done

[@PetmaluLife]

Thank you so much!

[@rjawaid]

Lots of hard work has gone into this... amazing stuff, inspirational !

[@PetmaluLife]

Yes, definitely a lot of time and effort was put into it. I was sad when my tank seam failed and water leaked all over it. I’m going to have to rebuild it. Thanks for watching!

[@timfuller7291]

WOW.......................... I'm speechless.

[@PetmaluLife]

Haha! Thanks man! It was definitely a tougher project than anticipated. Thanks for watching!

[@ahoyskid]

Love it!! Some diffuser strips over the LED's would be the cherry on top! Well done.

[@PetmaluLife]

Thank you so much! I’ll keep the diffuser in mind for future builds. Thanks for watching!

[@kha1038]

The neatest I have seen , well thought of . Good job man

[@Reefahholic]

That dude is a wizard! 💯👍🏼🇺🇸

[@calanprc3]

Wow! What an impeccable job! Thank you for sharing!

[@mikemcgrath8453]

Cool set up bro

[@PetmaluLife]

Thank you so much!

[@firsttimereefertv1588]

Dude that is INCREDIBLE! Nice work!!

[@PetmaluLife]

Thank you so much! So much time an effort was put into it. It’s unfortunate that it got ruined from the leak. I’ll be rebuilding a new one.

[@Jojoboogie]

Ang lupet bro!

[@Mano0f]

love it reminds me of how i handle my diys, subscribed

[@PetmaluLife]

Thank you so much! I know my limits. I try to DIY when I can but I know my limits. I appreciate your support.

[@ryancampos5993]

Very nice money was no object in this build!

[@dray9392]

This is Genius! $$$. 👍🏼👍🏼👍🏼

[@PetmaluLife]

Thank you! Glad you enjoyed it.

[@868_av8r]

Amazing!

[@PetmaluLife]

Thank you so much!

[@FLSharkdiver]

Looks amzing!!! I am working on mine currently now!!

[@PetmaluLife]

Thanks so much! I have to make a few updates to my new one since this got thrashed when my tank leaked. Hope yours is going well.

[@kwrwjw]

Great work.

[@mikeinvegas1]

Best I've seen. Im new to saltwater. Love to see a video of everything u used for automation and what it does. Whats needed for a fully automated tank:) beautiful work.lol.. i typed this comment just before u started expaining what each thing does🤣

[@CMathis777]

Looks fantastic and super clean. You may want to keep an eye on the power supply velcro. The heat from the power supply can lose the velcro adhesive.

[@PetmaluLife]

Thank you so much! I appreciate the heads up. I’ll definitely keep an eye on them.

[@gencoupe3.8]

Jealous of your amazing build!

[@PetmaluLife]

Haha! Thank you 🙏!

[@taylor4tails]

Just watched all your series and subbed. Nice tank and bit of kit. Looking forward to see what you stock in it. Great editing and top notch video. Super impressive

[@PetmaluLife]

Thanks so much Taylor! Appreciate your kind words and support!

[@estebanjc1]

Great Job !

[@nathanielrombaoa4964]

woah lupet! Amazing build. Please do light canopy build video.

[@PetmaluLife]

Thank you so much! Yes! I’ll definitely be making a video on my light canopy. Appreciate your support!

[@joseluisrodriguez2900]

Excelent design, congratulations, its an amazing control panel 😃👏🏻🏆

[@jeffatkins8103]

I know you don’t need to know this now but they make white acrylic. 😁 Very nice!

[@luis.aceves]

How does this guy not have more Subs and likes? Much better content than other sponsored reefers that don't seem to know what they are talking about. Making mistakes on purpose for thumbnails and clicks. Keep it up with the awesome content. @petmalu life

[@PetmaluLife]

Thank you so much for your kind words. That means a lot. Glad you’ve enjoyed the content so far. Look forward to making more. Thanks for your support!

[@williamlind2843]

I used white PVC board. It's waterproof and cuts nice.

[@PetmaluLife]

Nice! I ended up using white acrylic with my new tank. It turned out really well. Thanks for watching!

[@williamlind2843]

@@PetmaluLife Good choice too! Did you do anything since the accident? I'll subscribe and check it out. I'm running an 80 gal with AI lighting and Neptune systems.

[@arturoaguilar1743]

Man this is Amazing 🤩 custom extensions and the setup nice work bro sign up to your Chanel definitely want to see more stuff out of this built

[@PetmaluLife]

Hi! Thanks so much for your kind words. Glad you enjoy the setup and I appreciate you subscribing. Stay tuned for more updates.

[@buggyloustudiotv7134]

One of a kind amazing work. I went crazy on black Friday and I brought a lot of Apex equipment. It would be great if I had someone to help me set up my fish tank now. Great video you explained everything smoothly,

[@PetmaluLife]

Thank you so much. Glad you enjoyed the video. You must be so excited about your gear. Let me know how it all works out for you.

[@teemer1282]

custom extension cords are nice! ... you got another subscriber. definitely should detail how you did it behind the scene for those.

[@PetmaluLife]

Thank you so much for subscribing! Yes, I’ll definitely make a detailed “how to” video for the extension cords. Appreciate your support!

[@PetmaluLife]

Hi Lawn! Sorry about that. Here’s a link to the female plug: www.harborfreight.com/125v-15-amp-female-plug-connector-63125.html Thanks for watching!

[@PetmaluLife]

@@ThePorkyJedi You're welcome. Yes, you can paint it because it can be taken apart.

[@fostee1]

Impressive

[@quransunnah96]

its looks amazing the 1st day hahaha

[@Reefbelontv]

❤très joli 😮👍

[@maw1000]

Very nice.

[@PetmaluLife]

Thank you! Cheers!

[@jdpierce21]

Love the tank and organization! Did you make a video on how you made the power cords?

[@Steven-zj6bw]

This is something I want reminds me of a water cool computer.

[@justaquestion5080]

man cant Waite to see the video about wiring the electric cord

[@PetmaluLife]

I'll make the video in the next few weeks.

[@alsfishbarn1589]

So amazing! PLEASE make the diy power cord video!

[@PetmaluLife]

Thank you so much! 🙏 Most definitely! I wanted to have it done by the time I put up this video but just didn’t have the time. I’ll be sure to post it in the next few weeks. Thanks for your support!

[@jimpaulbarcena4259]

Idol !!!!!

[@jvelasco3373]

Nice looking control board there! Patmalu talaga! Currently building my red sea reefer 350 and checking out some great ideas for my build. definitely this is one of the cleanest I’ve seen👌🏽

[@PetmaluLife]

Thank you so much! Be sure to keep me posted on your progress. Are you on Instagram?

[@jvelasco3373]

@@PetmaluLife will do! I am, but not active on Ig. Just saw what happened to your aquarium, hope to see your new setup soon, build 2.0! More power to you and your channel.

[@915Mang]

Prettty Sweeet!

[@andreaandmarioposani445]

This looks amazing. Do you mind sharing where you got the custom cords and covers with the logo on them? Thank you so much.

[@Two1owT]

Such a clean build I think I need to print you new Cor strainers. Can’t be having those broken ones.

[@PetmaluLife]

Hey man! You actually gave me two, one slightly broken and one perfect. It seems to be working pretty well. Did you make any modifications to the one you gave me? I'll be in touch with you if I have any issues. Do you print other stuff too?

[@PetmaluLife]

Thank you BTW!

[@Two1owT]

@@PetmaluLife Oh yeah. So I’m guessing you’re only running one return pump. It’s just a shared file on Thingiverse. No changes. I can only design basic stuff to print.

[@PetmaluLife]

Yup! Just one return pump. Cool man! Lets keep in touch for any future needs.

[@Two1owT]

@@PetmaluLife Cool. I’m in the process of upgrading too. Building a stand out of 80/20 and redo my controller cabinet.

[@keithbratley6187]

This build is amazing. I am very interested in doing something like this. I may reach out for some info on the panel. I was blow away by that. Props to you for not being satisfied til it was perfect. Looks so good!!

[@PetmaluLife]

Thanks so much! Happy to assist you in any way. I had a vision from the beginning and I didn’t want to give up until I got it the way I wanted. I definitely learned a lot during the process. Took a lot of work but well worth it. Keep me posted on your build!

[@JermGLo]

Can you tell me where you found the female ends you used for the extension cords the link you posted brings you to the male ends. Love your setup! Thank you.

[@brandonpelayo1112]

Just a heads up, you may want to use a small amount of super glue to adhere the velcro strips to the stand and power bricks, as the heat generated from the power bricks tends to loosen the velcro’s “sticky side” over time; I mounted mine in the same manner and after regular use they kept falling off the stand until I applied the superglue. Great videos so far, those subs and likes should keep rising as your build progresses 👍🏼

[@PetmaluLife]

Thanks for the tip! I think I’m going a add a couple screws through them for extra support. Thanks for watching!

[@josemorales-uk6gw]

Did you plug the apex into the surge protector?

[@PetmaluLife]

Yes, here's a link to the surge protector I plugged the APEX to: www.bhphotovideo.com/c/product/1508653-REG/cyberpower_ht705uc_7_outlet_premium_surge.html/?ap=y&ap=y&smp=y&smp=y&lsft=BI%3A514&gclid=CjwKCAiA65iBBhB-EiwAW253WylVpbTm4_JfSyZe37lK0Wup9Wk8FSWEeVQTSpStgQQgEIS4o4AbIBoC1tsQAvD_BwE

[@JasonStJohn-my1cs]

I would like to know where you got that switchbox from I didn’t see it in the description. The one for the Neptune system

[@Isd0429]

I could be wrong but I think I remember on one of the brs videos Ryan was going to hang a power bar upside down like you did with the EB4 but didn't after people told him that there is a fire hazard in doing this. The fire hazard coming from a risk of gravity gradually pulling out the plugs and a partially pulled out plug runs the risk of causing an arc. Please anyone who is more knowledgeable on this weigh in as to it's safety. But love the videos, I need to check through your videos to see if you have shown off your nano.

[@PetmaluLife]

Thanks for your comment and interest in the videos. I don’t see any issues with the plugs being upside down. They are fully plugged in and snug. However I’ll be sure keep an eye on it. I have a shot of my nano tank in my first video. I’ll be sure to showcase more of it once I get my 100g up and running. Thanks for your support!

[@ocnbrze2003]

so i never have played around with electrical stuff. i'm scared of cutting the cords for each device. but i really would like to be able to shorten or add length to my cables and have them all uniform in colors like yours. any tips? should i practice on something else? or do you think it is pretty easy and i'm making more of a bigger deal then it really is?

[@PetmaluLife]

Hey man! Thanks for watching my video. The chords are super easy to make as long as you have the right tools. Here’s the reference video I used. I’m eventually going to make my own video. kzbin.info/www/bejne/r4HIoaOklrWcmMU

[@PetmaluLife]

Here links to all the materials: www.creative-cables.us/pendant-light-cord/15291-orange-white-chevron-covered-round-electric-cable-rz15-8057730776271.html www.acehardware.com/departments/lighting-and-electrical/switches-outlets-and-plugs/electric-plugs/3201233 www.harborfreight.com/125v-15-amp-female-plug-connector-63125.html www.creative-cables.us/home/30002-cable-cutter-stripper-for-cloth-covered-wire-9000006000055.html Be sure to buy extra cable just in case you mess up or need more. Let me know if you have any other questions.

[@BamBamm681]

I love the board scared of the placement of towel by the plugs a spark from them could be very bad. how much for the work.

[@buggyloustudiotv7134]

its good to see you have a new tank. From the last message i wrote I went online to try to get a male and female plug. On the link you posted it shows a male plug but i don't see the female plug. I also don't see a custom made switches. Can you please post the link so i can know where can I get it from. I like what you did with your new tank. Thank you so much. I also want to know where are you from because I need help with my fish tank I brought almost all my equipment from your listing.

[@rickyhaduca3977]

Dope

[@PetmaluLife]

Thank you so much!

[@stadt-mensch6302]

You should be german. That is absolutely amazing. 😀

[@PetmaluLife]

Haha! Yes, Germans are known for they clean designs. I’m a big fan of several German reef tanks.

[@pinay56]

What size lumber did you use for the main frame of your cabinet?

[@PetmaluLife]

The company I purchased from, Crystal Dynamic Aquariums made the cabinet. From the looks of it, it’s a combination or 4”x4”s and 2”x4”.

[@mrmr5918]

Do you have the cad drawing for the control board? Id like the measurements of the modules, esp the mp40

[@MySimpleReef]

Just amazing work man!! I have a question where you get the wire and the plugs 🔌 thanks 🙏

[@PetmaluLife]

Thank you so much! Here are the links to the materials used for the extension cords: www.acehardware.com/departments/lighting-and-electrical/switches-outlets-and-plugs/electric-plugs/3201233

[@PetmaluLife]

www.acehardware.com/departments/lighting-and-electrical/switches-outlets-and-plugs/electric-plugs/3201233 www.creative-cables.us/pendant-light-cord/15291-orange-white-chevron-covered-round-electric-cable-rz15-8057730776271.html

[@MySimpleReef]

@@PetmaluLife thank you 🙏🏻 for the help

[@MySimpleReef]

@@PetmaluLife thank you 🙏🏻 so much!

[@pdwinc.1077]

I did not notice any wire to your iPad. how do you keep it juiced up?

[@PetmaluLife]

I didn’t have power to it. I would have to remove it once or twice a week to charge.

[@miltonenglish1679]

this is so well thought out and nicely done. what about having that cabinet on some kind of wheel so you can roll it out to access your gears?

[@PetmaluLife]

Thank you so much! I thought of several different ways. A wheel probably could have worked too. The hinges have made it pretty easy to remove as well.

[@MrAntihero1001]

insane

[@PetmaluLife]

Thanks brotha! 🤙🏽

[@MrAntihero1001]

Working on getting it back up and going ? Can’t wait for the new vids

[@PetmaluLife]

Yes!!! My tank got delivered this past weekend so I’ll be planning it out and making some video updates soon.

[@MrAntihero1001]

@@PetmaluLife sweeet

[@davidmerriam2287]

@@PetmaluLife what size cables did you order from creative cables?

[@militaryreefer9128]

Can you make a video on how you made the custom extention cords

[@PetmaluLife]

Yes! It's on my to do list. Thanks for watching.

[@ocnbrze2003]

so i'm building my own dream reef tank. i would love to know how you did those custom cables. i hope you put out that video soon. i do not have the tank yet. it is being built as we speak. but right now i am thinking about wire management. and those custom cables are so cool. i would love to do it in blue. so far i have a blue theme going with blue pipes, blue sump, and a blue pump. so i'm looking forward to seeing the video on how you did it.

[@PetmaluLife]

Awesome! Dream tanks are the best. I’m planning to make the video next week. They are super easy to make. Did you see the links to all the materials in the video description? They offer a lot of different colors. Thanks for watching!

[@ocnbrze2003]

@@PetmaluLife i did thanx. i ordered some blue cables as that is my color scheme i'm going with. i am also plan on building a control box....not quite as nice as yours, but i wanted to do something similar. looking forward to that video.

[@kaseyascani127]

How did you get this toggle box? I have looked on Harry’s Aquatics and I’ve tried to contact them. I can’t find it.

[@PetmaluLife]

Hey Bud! I had it custom made last year by Harry. I know he’s been super busy but he’s definitely the man. Just keep trying to reach him. Try DMing him on Instagram or Facebook.

[@joelvos2006]

Hey so hope the new tank is working great! Quick question, so did you run the new extension cords plug ins to the power bricks and wire them there?

[@dewaynehess3314]

Love the board. I’d love to have something like that once I get mine up and going. I might have missed the video. But did you ever make the how to video for the extension cords? And do you still have your tank?

[@fitchaj]

I may be a simple man. But I know what love is

[@jamesparrott2073]

Will he do custom work and ship?

[@aarondus]

Solid cabinet build. I agree with the Andy, your OCD is admirable and inspiring. Out of curiosity, was there enough ventilation inside the cabinet? I’ve done a few different builds recently and always added a fan and temp probe to keep the equipment from overheating. Looking forward to seeing the rest of the tank come to life. 👊🏻👊🏻

[@PetmaluLife]

Hey Aaron! Thanks so much for your kind words. I too was concerned with the equipment getting too hot. I installed 4 of these to help: www.amazon.com/gp/product/B00ZDCCPUS/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 Hopefully they can help keep the temp down. Good idea on the temp probe! I might have to install one. So far my first fish are doing well.. I'll probably be adding coral around Christmas.

[@melaniesimpson6322]

Wow!! Amazing...Do you hire out? Happen to be in California by chance?..lol

[@closetocreamy]

Ohh i seen the tank in the back we gotta see it

[@closetocreamy]

Congrats on 400 subscriber's

[@PetmaluLife]

Hi @king slong! Yes, once I get my 100g up and running I’ll do some videos showing my nano tank. It’s been up and running since 2013. Thanks so much for watching and for your support!

[@echoavu2376]

Amazing. Mind sharing your cad file ?

[@matthewdevera6697]

Wow

[@PetmaluLife]

Thank you!

[@joeb1906]

your lucky! im trying to get this done but i dont think there is resources in 559 area like this

[@truereefkeeping6022]

I guess I’ll be the one to ask, how much did this cost you to make?

[@bigwavecoralsllp]

How much did this end up costing? I’m guessing quite a bit…

[@adambahe9309]

Can you release all of the measurements/3d files for this? It would save me a ton of time having to also measure every point of the components to build my own.

[@PetmaluLife]

Possibly. That's what made it pricey. I paid the guy an hourly rate and a lot of it was spent on measuring. It's the most tedious aspect. I'll most likely be able to get the file from him and plan to sell it for people interested..

[@pauljeffreys9984]

Do you fancy coming to the UK and doing this to my tank for me ? Lol

[@PetmaluLife]

I’d love to someday! I’ve never been across the pond. Or at least the Atlantic pond.

[@brianaltmann613]

what was the cost? Im looking to do this too and if he tells me a high price i want to show him this video...

[@vernonflowers]

Did you fall off the planet? You the earth is flat? I enjoy your content, if you have time I'd really like a video on the custom extension cords and an update on how the Dream is doing, holla at you boy....peace

[@Val_Halla777]

Absolutely incredible build. Turned out Awesome! One note of caution ..could be a risky move relying on Velcro adhesive for the power bricks like that..It can loosen from heat and humidity over time. Also it was a bit odd to me why that cnc guy didn’t recommend styrene or pvc board instead of something requiring lacquering. Appreciate sharing this sweet build!

[@PetmaluLife]

Thank you! Appreciate the heads up on the Velcro. I’ll keep an eye on them. Yeah, not sure he didn’t recommend anything else. I think it’s because I came in there with my mdf board I previously made so we just ended up recreating it more precisely.

[@frostyhardtruth3170]

Awesome brother. Such as sweet system. Really looking forward to see your future progress. Thanks again for all🙏

[@itsyouboysati]

22:14 PROVIDE OXYGEN HE IS GAPSPING 😂

[@raisethereef]

It's already in the comments but your power supplies will go for a swim at some point. Velcro never holds up for our use. Go get the Ecotech power brick brackets. They screw in to the wood and won't fail you

[@PetmaluLife]

Thanks for your advice. If you had a chance to see my latest video, I'll be doing a build 2.0. So I'll definitely consider that. Thanks for watching.

[@raisethereef]

@@PetmaluLife Just saw it...heart breaking man. Left a comment there too

[@christianpolk4801]

Very nice but too sure it’s too expensive for me to follow

[@PetmaluLife]

Thank you! It’s definitely a pricey hobby. There are ways to save some $$$ though. This is my dream tank so it took me some time to save up to get the gear I wanted. Thanks so much for watching and for your support!

[@icazuchi]

yeahhhhhhh keep drilling out massive holes in your framework.... surely thats not going to impact on the structural capacity of your stand?

[@PetmaluLife]

No worries buddy. My new tank has a steel stand. No drilling will be done. Thanks for your concern!