Dremel Right Angle Attachment 575 Demo & Review in HD how to

[@pph321]

An excellent video - tells you all you need to know if, like me, you're thinking of buying one of these. Your assistant, Mr Sparrow, was superb and really added to the experience!

[@CelticDreamsCoUk]

Thanks. Glad you liked the wildlife. Thanks for watching. Dave

[@chavezjss777]

You just made my day David, been able to see a birdie in your hand, Love it. God be with you.

[@CelticDreamsCoUk]

And you. Thanks for watching. Dave

[@SandraOrtmann1976]

I just ordered a new Dremel (my old 300 model just did not want to run anymore yesterday) and included is this device. Now I know what great things I can do with this item. Great video! And you have another subscriber.

[@CelticDreamsCoUk]

Thanks. Perhaps check out my other Dremel videos, as I show a few different accessories. Thanks for watching. Dave.

[@bryaneast2513]

Many thanks for this video, I was having a bit of trouble trying to work out how to fit this part and you have made it so simple. Dremel instructions are lacking for such a wonderful tool. Mine is a Dremel 4000. Thanks again.

[@CelticDreamsCoUk]

You're welcome. Check out my other Dremel videos for some tips on various accessories, like the Multi chuck. Thanks for watching. Dave

[@tammystone2683]

Another awesome video!! You have clear, concise speech, and are full of great information! The manuals don't help much, so your videos are a godsend!! Would love to see more things you use the dremel for! Thank you for putting these videos out there, and keep up the awesome work!!!

[@CelticDreamsCoUk]

+Tammy Eubank ...thanks for watching and for taking the time to send such lovely comments. Dave ; )

[@briw4647]

This accessory is probably my favourite dremel accessory. So handy

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@roberteddy8025]

Mate, again you've outdone all others with the quality of video. I've been setting myself up to do different hobby stuff to keep busy and your videos on the Dremel products are fabulous, keep them coming as I've come to hold your opinion on the products highly, well done.

[@CelticDreamsCoUk]

Thank you Robert, for such a lovely compliment. its nice to be appreciated. Something that most people don't know is that there are many products which I am given to test, but I never show . If I don't feel they are suitable. I will help the manufacturers and give them feedback as to what the issues are, but I do this privately. I wont make a video publicly criticising a product. That's not my place (and would probably get me sued anyway). So all the products you see in my videos are my own genuine items which I personally endorse and use. The little cordless Dremel Micro I use daily, as its just so convenient - despite having two professional flex shafts. Thanks for watching. Dave

[@josemariafrancogonzalez]

Yo this is the most wholesome intro i've seen on youtube hahahah, and I've watched a lot of youtube. The bird part was unique and quite nice! Subscribing :)

[@CelticDreamsCoUk]

Glad you enjoyed it! Dave

[@jimcorderman2649]

Very helpful on understanding the right angle attachment & how it attaches to the Dremel. Thanks

[@CelticDreamsCoUk]

+Jim Corderman Thanks Jim, glad you found it useful. Dave.

[@StormwatchDruid]

Simple and clear video, many thanks just got a Dremel not actually used it yet but watching a few videos for tips etc before I do.

[@CelticDreamsCoUk]

Check out "Dremel 3000 full review" in which i show some of the accessories. Thanks for watching, Dave

[@ilookafterthewater601]

Can listen to this fella all day long, with his "skwurr notts" and whatnots 😀 Best... ucksent... evurr!! Plus, I like the way he takes us through baby steps, when needed, so we can get a better idea about how things work. Outstanding.

[@CelticDreamsCoUk]

Thank you, very kind. Northern English. Dave

[@melleartz]

Your video is still really useful today Dave. It helped me work out what to do so easily. Thanks.

[@CelticDreamsCoUk]

Glad it helped. Dave

[@granadojl]

Amazing review. Thank you. This review has convinced me to purchased this as I need something like this to get into a tight space. Much appreciated.

[@CelticDreamsCoUk]

You're very welcome. Thanks for watching. Dave.

[@granadojl]

I just received my angle attachment today and i'm going to test it on the chassis of my '57 Ford F100. Thanks again

[@DreamingCatStudio]

Thank you for great instructions! I'm sure I'd be completely stumped by the spindle lock without them. Loved the bird moment too!

[@CelticDreamsCoUk]

mbajhi Thanks. It took me a while to understand what the image was referring to. Glad it helps. Dave.

[@bluefernlove]

You know what that bird on your finger means don't you? You are officially a Disney Princess 😂😂😂 that was amazing!!! 😁

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@deborahfalkowski1841]

Great video I couldn't get it attached by the instructions or other videos until I saw yours

[@CelticDreamsCoUk]

Glad I could help. Dave

[@tobuslieven]

0:31 Legendary moment here. Love the videos.

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@Eternaltools]

I love your new video chum Dave! That sparrow must be wanting to do a bit of DIY to his nest and thought he'd listen in on your latest review. Another super video by the way

[@CelticDreamsCoUk]

Eternal Tools Thanks Lucy.!

[@johnnymclachlan7493]

Awesome video, thanks for your help. I would have been messing around with this dam thing for hours if I didn’t watch your video. Great instructions and very easy to follow. Thank you for your help.

[@CelticDreamsCoUk]

Glad I could help. Dave

[@houndsmanone4563]

Nice demonstration. I am going to purchase the right angle attachment. Enjoyed a full watch of your video. Thanks! 👍

[@CelticDreamsCoUk]

Thank you. At least you can make a more informed decision. Dave

[@kmwrites7456]

what a lovely bird visit. Thank you for this great instruction video as I am planning on getting one soon.

[@CelticDreamsCoUk]

Glad it was helpful! Dave

[@TheGlitteredBones]

Thank you! my attachment didn't come with accessories so I was kinda lost lol. This was so helpful!

[@CelticDreamsCoUk]

Ashleigh Anderson No the right angle attachment just comes on its own. Glad you found the video useful. Dave.

[@tmontero8492]

You had me at the songbird... The rest of the video was good, too. Thanks!

[@CelticDreamsCoUk]

Glad you enjoyed it. Dave

[@anastaciocastro89]

badass video, thanks for clear concise instructions dremel should hire you

[@CelticDreamsCoUk]

Thanks. Do check out my other Dremel videos for info on some of the accessories. Dave

[@Johnthedagger]

Great video. Very clear video and explanations. Enjoyed it.

[@CelticDreamsCoUk]

Thank you. Glad to have helped. Dave

[@jungleowl]

Hi the best I liked in this video was the sparrow on your finger. How did you manage that ? Splendid I must say. Sparrows just take off at the tiniest of threat. You must be a bird lover too. God bless you. And yes, the demo was good too cause I have just ordered mine from Amazon and it's going to come today. Thanks.

[@CelticDreamsCoUk]

Well, I had to leave him in the video. Dave

[@jensg.breuer6636]

Great video Dave, very helpful!

[@CelticDreamsCoUk]

Glad you enjoyed it. Dave

[@tonym6920]

Very nice video, well demonstrated and highly informative! Thanks so much! I'm now a subscriber!

[@CelticDreamsCoUk]

Thanks for watching. Don't forget to check out the dremel itself... Dave. kzbin.info/www/bejne/nHrKd519mdFgn7c

[@mattodrums]

Cheers from from California. Noticed your Celtic reference. Come on you Bhoys in Green! ;)

[@CelticDreamsCoUk]

Thank you. Dave

[@victorbrown9850]

Always been a sparrow lover, one of the most beautiful birds in the world

[@CelticDreamsCoUk]

Indeed Cute little things. Dave

[@peterdurnien9084]

Thanks for the video, I got no instructions with mine. It came as a gift and due to watching the video I can now see whats wrong. I have no drive spindle with the right angle attachment. I hope that I can get one some place? Do you or anyone know where?

[@CelticDreamsCoUk]

If there's something missing, then just buy a new one and send this one back. Dave

[@kennyk4134]

Good , well explained no nonsense video. just the way i like my reviews.

[@CelticDreamsCoUk]

Thanks....and thanks fro the Sparrow too. Dave ; )

[@kennyk4134]

The sparrow was cool you must have a good nature birds can sense that .

[@spoonfedtruth7666]

Thank you!! Finally I can use my right angle attachment

[@CelticDreamsCoUk]

Glad I could help! Dave

[@davemcd100]

Hi, great video. Just wondering if you could use this attachment with the dremel mounted in the dremel drill press (220)? If you put a cutting disc in it you could use it as a mini chop saw type of thing. Dave.

[@CelticDreamsCoUk]

Hmm interesting point. I don't see why not, as long as you have the height clearance. You've got me intrigued now. Dave

[@davemcd100]

I’ll try it and let you know if it works or if I lose a finger!

[@franceswinyard2101]

As always. ...great tutorial ! Thanks Dave !

[@CelticDreamsCoUk]

Frances Winyard Thanks Frances.

[@joeblow1942]

Will this fit on the Harbor Freight rotary tool?

[@CelticDreamsCoUk]

I'm Not familiar with the Harbour freight unit. So I cant say. But if the Harbour freight unit is a Dremel copy then it probably will. Sorry I cant be more specific. Dave

[@joeblow1942]

Celtic Dreams Thanks for replying. I got one and can see that it doesn’t fit the HF tool at all.

[@tlsajak]

I was going to buy the attachment for my dremel 4300 but a lot of reviews said it broke after very little use and many said it caused a loud sound and made them feel it was unsafe to use. I guess because the internal parts are plastic? Is there a supplier that makes this 90 degree attachment out of sturdier materials?

[@CelticDreamsCoUk]

yes its plastic. with two internal plastic gears. many people criticise this, but it is what it is. The Dremel tools are designed for home and hobby use, and this is reflected in the price. For light use they are fine. The main alternatives are professional fordom flex shaft attachments, Superior quality, but obviously a more expensive professional option. As for a metal version of this, I've never seen one. Dave

[@emmanuelleguerin5679]

Thank you. Your video is very clear.

[@CelticDreamsCoUk]

Glad it was helpful! Dave

[@RecetasDukanMariaMartinez]

Really helpful, thank you and greetings from northern Spain

[@CelticDreamsCoUk]

Hola. Thanks for watching. Dave.

[@vvillem9]

When storing the attachment you can screw the tiny adapter nut on the business end of the hook attachment for safe-keeping

[@CelticDreamsCoUk]

+Willem Arnhem ..great tip, thanks for sharing. Dave

[@saltyfox7056]

Thank you for this video. It helped me a lot.

[@CelticDreamsCoUk]

You're welcome. Dave

[@TheUnofficialMaker]

yes, its a great item. Just used it after watching this video.

[@CelticDreamsCoUk]

Glad it inspired you. Dave

[@710tommy]

Did you know you can actually use the cap to tighten and loosen the collects its basically as wrench

[@CelticDreamsCoUk]

Yes, I show this in my other Dremel videos. Its not well known. Thanks. Dave

[@mmmallory1649]

Thank you. After viewing your video it seems common sensical but for the life of me I couldn’t figure it out. I still don’t know how to attach the bird. I guess that’s another video.

[@CelticDreamsCoUk]

Staples ! Well, I just had to leave him in. So many people ask about the bird noises. Thanks for watching. Dave

[@mmmallory1649]

Celtic Dreams nice to know that people still have a sense of humor regardless of its color.

[@ginnyprivate7537]

This was so helpful! Thank you.

[@CelticDreamsCoUk]

Thanks. Do check out my other Dremel videos too, for lots f tips on other accessories. Thanks for watching. Dave

[@peewee678]

Thanks man. You saved my day!

[@CelticDreamsCoUk]

You're welcome. Glad to help. Dave

[@o.eugene]

Hi, great tool and video! Just wonder whether this Dremel product works with Proxxon drills (like FBS 240/E)? I have already got Proxxon tool but no attachments for them so far...Please advice.

[@CelticDreamsCoUk]

Probably not. It is designed to screw onto the end of a Dremel. Dave.

[@o.eugene]

Thank you, Dave! You are right - checked my Proxxon FSB 240/E, it does not have the screw on its wide front 'nozzle' to be attached to Dremel 575. Proxxon had angle attachment before but now it is not manufactured. Will check with them on Monday what they have. Thanks again, great video, I was dreaming about such angle attachment for years. Eugene

[@rickflairsplash]

how are there thumbs on this video smh great tutorial, two thumbs up 👍👍

[@CelticDreamsCoUk]

Thanks. But not sure what you mean? Dave.

[@richiesquest3283]

Great tutorial helped me a lot thanks.

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@sondon7103]

I love this tool! I have used it for over a year and it has never disappointed me. kzbin.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR As long as you remember it is a battery tool and not intended to do continuous heavy work (I have a corded tools for that), it will give you great service for quickie jobs. I get long use out of the batteries and just watch my charge levels, and have yet to use an entire charge on one project. I would also highly recommend the keyless chuck which I also find very useful. Today I cut nine heavy wires on a piece of concrete wire mesh which is used for a garden trellis with a cut-off disk and then used a grindstone to smooth the edges. I tried first to use one of my heavy-duty 20v lithium grinders/cut-off tools and it was just too hard to control the tool on the wires and get good close edges, so I switched to the Dremel and had no problem. It was so much easier to control to get nice flush cuts.

[@CelticDreamsCoUk]

I think so. I don't use it a lot, but when I do its quite invaluable. Dave

[@venice77]

Does the attachment reverse the direction the bit spins?

[@CelticDreamsCoUk]

No it doesn't it simply turns it 90 degrees. indeed there is no reverse facility on the Dremel either. If you you think about it this makes sense as many burs and accessories only work in one direction. Burrs with cutters on such as setting burrs, engraving burs etc only cut in one direction. Sanding and cutting discs that screw onto a mandrel would unscrew. rubber polishing points and felt pad that use a long threaded mandrel would also unscrew. etc etc ...You get the idea. Hope this makes sense. Dave.

[@Midnightkid00]

The Jesus we didn't ask for, but got. lol

[@CelticDreamsCoUk]

Thanks (...I think). Dave

[@robalan57]

I have heard the attachment doesn't work long. I guess it burns out. Does that happen? If so, can it be oiled or something to extend the life?

[@CelticDreamsCoUk]

Inside it's very basic, just two gears at right angles - simple as that. So not really much to go wrong. You could open up the unit with an allen key and grease the gears if you really want to. But it's only a couple of pounds to buy a new one, so i wouldn't waste to much time on it. Dave.

[@albertoortiz3574]

Thanks! Great practical, vide o!

[@CelticDreamsCoUk]

You're welcome! Dave

[@youtuuba]

Too bad there is no mention of how hot this attachment can get, especially with the higher speeds required by some attachments, or with extended run times. Can get too hot to hold. Basically, the design is faulty in that the right angle gears are running dry. They are in a plastic chamber with a glob of grease that gets flung off the gears as soon as you first spin it up, and then they never see any lubrication again. The correct design would have been to make the housing out of metal or a stiffer plastic, gasket it, and have another couple screws to hold the halves together, then have the gears running in oil. But that probably would have pushed an occasional use accessory into a higher selling price.

[@CelticDreamsCoUk]

I agree that a metal housing would be better. But I guess that’s not the market that Dremel are going for. The attachment is intended for light hobby use and only costs a few pounds, being made of plastic. I don’t believe its really intended for extended periods of use. I’ve used it for small polishing jobs, and it’s been fine, run at low speeds for a few minutes at a time. But thanks for sharing your experiences, it all helps. Dave

[@balthebat]

So clear and helpful, thank you

[@CelticDreamsCoUk]

You're welcome ! Note I also have videos on the Dremel 3000 and cordless models too. Thanks for watching. Dave

[@frankg3072]

Excellent tutorial, thank you!

[@CelticDreamsCoUk]

You're welcome. Dave

[@nestorguevarra6071]

thanks for the demo sir

[@CelticDreamsCoUk]

You're welcome. Thanks for watching.Dave

[@victorbrown9850]

how did you get sparrow on hand ???? sparrows are usually afraid of people. is sparrow yours ???????

[@CelticDreamsCoUk]

Just as you see, never happened before or since. It was probably just a youngster, they live in the ivy at the back. Wanted its moment of fame. Just perfect timing. Thanks for watching. Dave

[@FuriaDjs]

Will this attachment work with a Dremel 200?

[@CelticDreamsCoUk]

Yes, it should do. It will work with any Dremel which has the screw on knob at the end. The 200 has one and should be fine. Dave.

[@FuriaDjs]

It does work I've contacted Dremel and they send me all the info thank you.

[@CelticDreamsCoUk]

Thanks for the input. Dave.

[@HamChex]

Do they make this for the E-Z lock dremel?

[@CelticDreamsCoUk]

Most of the Dremel attachments are intended to fir onto the screw section as seen here. so most attachments only work with these "standard" Dremels. Dave

[@Gjmahn]

Dimension from chuck nut to back of unit?

[@CelticDreamsCoUk]

65 mm. including the nut. Dave

[@saltpepper1894]

top knotch video! love the bird moment too!

[@CelticDreamsCoUk]

Thanks. I just had to leave it in. Dave

[@nixland]

Very helpful. Thanks.

[@CelticDreamsCoUk]

Thank you. Glad you found it useful. Dave

[@JRD_MEDIA]

When my friend pops by 00:35

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@oneofyou6773]

You did say ''Keep it coming'' before the bird nearly landed where you are lol

[@CelticDreamsCoUk]

Well, I had to keep that bity in. Thanks for watching. Dave

[@TheNeverFinishedProject]

Likes up and subscription just for the bird moment 👍😂

[@CelticDreamsCoUk]

Glad you liked it. I had to leave it in. Thanks for watching. Dave

[@lynnperez1363]

Wonderful bird!💕

[@CelticDreamsCoUk]

Thanks. A youtube star in the making I think. Dave

[@nitsan]

great vid. subbed.

[@CelticDreamsCoUk]

Thanks. See also.... kzbin.info/www/bejne/nHrKd519mdFgn7c Dave.

[@Tronextools]

Great video - hilarious!!

[@CelticDreamsCoUk]

Tronex Tools Thanks Nina. I decided to keep it in. Why not. : )

[@Sommerchan]

Simply brilliant

[@CelticDreamsCoUk]

Thank you. Do check out the full review....Dave. kzbin.info/www/bejne/nHrKd519mdFgn7c

[@WarPigstheHun]

Yah but why don't you use the quick attachment? I bought like 2 of them for my 2 attachments :)

[@CelticDreamsCoUk]

A quick attachment for your attachment? Not sure what you mean. The idea here is simply to show you something that not many people are aware of, and show you what it does. Weather its of any use to you, I guess is for you to decide. I'm simply showing you what it is. Thanks for watching. Dave

[@jerseycasull4546]

Just the bird on your finger gets you a like and subscribe

[@CelticDreamsCoUk]

Thanks. Dave

[@misfit138zwc]

Bird whisperer!

[@CelticDreamsCoUk]

They add a nice background to my videos. Dave

[@1PITIFULDUDE]

Informative video. Thanks.

[@CelticDreamsCoUk]

+Mike Penske Thanks. : )

[@kwanfong3204]

I actually had to look around on the web to find out whether this attachment is compatible with my model 100 (base model). Here is a tool/attachment compatibility chart for those who are interested in this Right Angle Attachment: www.micromark.com/html_pages/misc/dremel-attachment-chart.jpg If you are a computer case modder like myself you are going to love this attachment.

[@CelticDreamsCoUk]

+Kwan Fong Thanks for the added info and link. Dave

[@christinakeenan9044]

Thank you for making the instructions clear. : ) Dremel sure didn't. : ( Seems like a very useful attachment.

[@CelticDreamsCoUk]

You're welcome! Thanks for watching. Dave

[@Mohamedalnaas]

thanks for great review

[@CelticDreamsCoUk]

Thanks for watching. And for taking the time to say Hi. Dave

[@tgaent2]

great teacher!!

[@CelticDreamsCoUk]

Thanks for watching. Dave.

[@aaronchapman9148]

Sold!!

[@CelticDreamsCoUk]

At least you can now make an informed decision. Thanks for watching.Dave

[@bobdehuisbaas1]

Came for the review, liked for the bird

[@CelticDreamsCoUk]

Thanks. I decided to leave it in...why not? Thanks for watching. Dave

[@ShittySwag]

man, the bird made my day

[@CelticDreamsCoUk]

Thanks, Just lucky timing to have the camera on. Had to leave it in. Thanks for watching, Dave

[@laudenclear4220]

thumbs up for the bird. :)

[@CelticDreamsCoUk]

Thank you. I had to leave it in. Dave

[@mrpresident5186]

good vibes that bird spotted it

[@CelticDreamsCoUk]

indeed. Thanks for watching. Dave.

[@sampankratov9586]

Thank you

[@CelticDreamsCoUk]

You're welcome Glad I could help .Dave

[@HowlingUlf]

Man! Dremel should pay you for making proper instructions for them, right? :D

[@CelticDreamsCoUk]

Sadly they don't... and note no ads either. Just helping out my fellow jewellers. Dave

[@shaneroberg309]

THANKS MATE CHEERS 575

[@CelticDreamsCoUk]

Hope it helps. Thanks for watching. Dave

[@carlosfraija6216]

Excellent!!!

[@CelticDreamsCoUk]

Thanks for watching. Dave

[@universeskater7679]

That sparrow was so cute!

[@CelticDreamsCoUk]

Imndeed. Although I do worry where the name sharp shooter comes from. Thanks for watching. Dave

[@universeskater7679]

Celtic Dreams And once again, you have helped me make a decision in life. l was in doubt if I should change my channel name as it might be the cause of confusion some day. Now I have decided. I WILL. *HOW THE NAME CAME INTO BEING. IMPORTANT* I used to play a game called *8 ball pool* 🎱 Hence I had made an account to sign in and play the game online. Because *I was a sharp **_pool_** shooter* . And that ended up being my KZbin channel. Thanks for being open; It really helped to get an opinion. 😀🙃🤝🤝🤝🤝

[@universeskater7679]

Celtic Dreams umm.. did you comment something and deleted it which said :- “ *any thing to get on TV* “ ? Did you?

[@CelticDreamsCoUk]

yes. Just cleaning up. Dave

[@universeskater7679]

Celtic Dreams 😂 That’s a KZbin programming bug, then! I had the notification INSIDE the KZbin app! It hadn’t gone away!

[@albaidol234]

God bless you,,,, with that bird

[@CelticDreamsCoUk]

Thanks. Dave

[@TheGalaxyhopper]

last time i saw a guy do that bird trick, he went to the pen in a few weeks

[@CelticDreamsCoUk]

ha!. Thanks for watching. Dave

[@beanbaguk]

Wish I had it to cut off my exhaust pipe! It would have made my life so easy!!!!

[@CelticDreamsCoUk]

+beanbaguk ....Indeed, The 90 degree attachment allows for much greater accessibility in tight areas. Thanks for watching. Dave.

[@CelticDreamsCoUk]

+MrSierra5000 ... I think the Dremel 4000 is smaller. it is refereed to as miniature. So the attachment screw on the end may be smaller. Dave.

[@shaneroberg309]

IT WILL BROTHER ALWAYS REMEMBER SAFTEY FIRST CHEERS MATE ALL GOOD BROTHER BE CREATIVE PEACE LOVE OUT SHANE

[@CelticDreamsCoUk]

?? Erm... Thanks for watching. Dave

[@brunolovadina5723]

Bello !!!!!

[@CelticDreamsCoUk]

gracias. Dave

[@donaldsmalley6108]

Trouble shooting dremel 2000

[@CelticDreamsCoUk]

Is that a statement or a question ? Dave

[@chessguru900]

The conclusion is that this will not work with dremel 7.2v battery operating version.

[@CelticDreamsCoUk]

You need a Dremel with the screw cap for accepting attachments. The cordless versions don't usually have this, as they are not intended for use with attachments. Dave

[@jarekjarek19]

Masz zajebistego ptaszka.

[@CelticDreamsCoUk]

Dzięki za oglądanie. Dave

[@Séananigans69]

"Skwer".....hel'low darn ther....!

[@CelticDreamsCoUk]

Greetings. Thanks for watching. Dave

[@Mokimanify]

Dremel instructions do suck. I think the flex tool seems much more useful

[@CelticDreamsCoUk]

I have several flex shafts and they are brilliant. But I must admit, I have not yet tried the Dremel Fortiflex. Dave.

[@davidgodby6096]

Excellent instructions! Thank you!

[@CelticDreamsCoUk]

Thanks for watching! Dave