100 year old rare antique ratchet restoration | Dr. Hut of Handcraft

#ratchet #hutofhandcraft #restoration #toolrestoration
Second Channel: / @drhutslab
Patreon: / drhutofhandcraft
Instagram: / dr.hutofhandcraft
Facebook: / hutofhandcraft
Welcome to another restoration! Today: an antique ratchet. I did a lot of research but unfortunately couldn’t find out where this ratchet has it’s origin and which company built it. But from the type of construction I can tell that it must be very, very old, probably 100 years. If you have any idea where this ratchet comes from or how old it exactly is please write it in the comments!
You will see a lot of lathe turning, cold bluing, filing, grinding and wire brushing in this video.
If you are willing to support me leave a comment, subscribe and share my work, I really appreciate and it helps me a lot!
I hope you will have some fun watching the video! If you have any further questions on tools, the process or the chemistry behind removing rust with electrolysis, acetic acid, cold bluing or flame coloring please write a comment, I will be happy to answer your questions!
Disclaimer:
The experiments are only for educational purposes and serve as entertainment.
I am experienced in handling the used substances and I advise everyone who is not a trained professional not to imitate the experiments I show you.
For experiments which could cause potential danger I will not tell you which chemicals I am using to prevent imitating. Those who know what is happening, know the chemicals anyway and probably are trained professionals. :)
I am not responsible for personal injury or property damage if the experiments will be imitated.
I hope you understand.
Until next time :)
Music at the end: Carol of the Bells - Quincas Moreira
Instagram: / dr.hutofhandcraft
100 year old rare antique ratchet restoration I Dr. Hut of Handcraft

[@DrHutOfHandcraft]

Hey guys, I hope you liked the video! I also have Instagram, Patreon and Facebook. Here are the links: instagram.com/hutofhandcraft www.patreon.com/DrHutofHandcraft fb.me/HutOfHandcraft

[@luisgalvan956]

O

[@calinhanca5704]

Producătorii de scule falimentează dacă toată lumea procedează astfel 😏

[@nelsonsilvera8013]

porque el ( comentar)esta anulado en mis comentarios

[@jacquelinelayne7702]

AMEN

[@joebowser4443]

thats incredible, if everyone did this instead of throwing things away the world would be a better place

[@DrHutOfHandcraft]

I absolutely agree! So many things are thrown away unnecessarily, very sad. Anyways, thank you for your comment mate! 🙏🏼

[@Jmoney709]

I think i would be fired if i pulled this out at my job as a mechanic.

[@DrHutOfHandcraft]

@@Jmoney709 good then that you don’t have it to pull out at work 😄

[@Jmoney709]

@@DrHutOfHandcraft haha yes i hate it there anyways

[@DrHutOfHandcraft]

@@Jmoney709 Quit then 😂

[@bobbyb1607]

Nice work! You made an old guy happy. I worked on underground water mains and we used open ratchets like this. Very heavy duty and easy to clean the dirt and mud off of. Hose it off, blow it down with compressed air and spray it with WD40. I believe these are still made for the underground utility trades. Thanks

[@DrHutOfHandcraft]

Thank you for your comment Bobby, I am glad you liked the video! 🙏🏼

[@misterpatina]

I love this ratchet and what you made of it! Pretty sweet! 🥳

[@DrHutOfHandcraft]

Thank you my friend 🙏🏼

[@fado792]

No patina left!!!

[@AllThingsMech]

I would like to take a second to appreciate the fact that you gave this ratchet a very classy/functional matte brushed finish...instead of a ridiculous mirror polish (like 90% of the other tool restoration videos on KZbin). Outstanding job.

[@DrHutOfHandcraft]

Thank you very much mate 🙏🏼 I like brushed and matte more than mirror polish too..

[@ex-scientia4234]

I do restoration work as a hobby and it’s always great to watch your videos, not only to enjoy your working, but also to improve my own skills. I’m also a chemistry teacher and, unless it’s already been commented, the metal ion flame test you did shows either a strontium or lithium salt present to produce the red flame (calcium would produce an orange-red flame). It’s a great visual demonstration to do to show metal ion colours by adding a splash of alcohol to a solution of the metal salt then spraying into a clean flame. Keep it up!

[@DrHutOfHandcraft]

Thank you so much, I really appreciate it! It was a strontium salt 😄 Glad you liked it!

[@alextv8975]

That extra length you went to by torching and prying apart the ends to take out the ratcheting cylinder was over the top, dude. Good work.

[@DrHutOfHandcraft]

Thank you 🙏🏼

[@robapple78]

Only Stallone is Over The Top

[@kenholt8297]

@@robapple78 Stallone? That dude resides in a senior center. His exercise now is having Walker races with old fart Swartsnager. 😯🤣🤣

[@JeremyCooperIsAwesomeSauce]

Anyone else get close to the end and think, "man I'd really love to see this in action"? AND THEN AT 16:29, HE DELIVERS!! 100% satisfaction, lol. Bravo on a job well done!

[@DrHutOfHandcraft]

Glad you liked it, thank you Jeremy! 😄

[@arungaddam64]

Old is gold .Beautiful restoration.

[@DrHutOfHandcraft]

Thank you!!

[@Centurion785]

Amazing work. I love the combination of bluing and silver finishes as well as preserving some of the patina.

[@DrHutOfHandcraft]

Thank you very much for your kind words ✌🏻

[@MrTruckerf]

I hope the silver finish doesn't rust; I have trouble like that with metal left 'in the white'.

[@glaglos3414]

I am really impressed! I know you're good at it, I didn't expect that! ! ❤️

[@DrHutOfHandcraft]

Thanks mate ❤️

[@norndev]

With so many fake restoration channels I'm always happy to come across a genuine one. Good job.

[@DrHutOfHandcraft]

Thank you!

[@muchmining7672]

Okay. The ratchet part dropping and the symbol crash’s got me. 😂😂

[@DrHutOfHandcraft]

😄

[@mikerayle6103]

Pretty cool hobby to get into. I've always loved old tools even though they don't have practical uses in todays industry. Atleast they were meant to be serviced. Maybe one day they will make a return. Great job.

[@DrHutOfHandcraft]

Yep I can confirm, it’s a great hobby! Thank you very much! 🙏🏼

[@jerrybrown1446]

That looks really good. The color of the blueing against the silvery steel is pretty cool.

[@DrHutOfHandcraft]

Thank you!

[@billdouglas1721]

Wonderful! I have a few specific items to praise. First, thank you for using electrolysis for rust removal. It is the least expensive and least invasive rust-removal technique there is, leaving the original metal as intact as possible. Second, it was wonderful to see a restoration in which the tool wasn't tortured with the lazy man's approach of using a grinder or sandblasting, both of which harm the tool's original surface, requiring more time and resulting in unnecessary removal of good metal. The way you did the restoration preserved absolutely as much of the original metal as possible. Finally, a comment on the tool itself: What a great design, doing without a forward-reverse switch and all its attendant potential problems. The one-way rotation of the ratchet is a much simpler and trouble-free design. Overall, great job on a nice tool!

[@DrHutOfHandcraft]

Thank you for your comment and your kind words! Yes, the design of the ratchet is very nice, I like it a lot too!

[@MWRestoration]

Nice Video 👌

[@DrHutOfHandcraft]

Thank you!

[@SuperTruebrit]

the sound of the ratchet made it all worthwhile! excellent renovation!

[@DrHutOfHandcraft]

Thank you!! 🙏🏼

[@raptors3164]

Excellent restoration, what a beautiful ratchet wrench it is now. Thanks for sharing 👍👍👍👍👍

[@DrHutOfHandcraft]

Thank you very much, I really appreciate it!

[@BB_Chaptsick]

Very impressive job, sir. Funny how such a small part can require so much work. Looking forward to your next project. Be safe.

[@DrHutOfHandcraft]

Thank you mate, I really appreciate your support!

[@496bot]

amazing how it turned out so beautiful classic tool. Great job Dr. Hut!

[@DrHutOfHandcraft]

Thank you mate 🙏🏼

[@TheAngelOfDeath01]

What an absolutely miraculous transformation. Well done, sir!

[@DrHutOfHandcraft]

Thank you very much Martin!

[@hiddentruth1982]

that finish was a nice touch and looked good together. a great improvement on the ratchet.

[@DrHutOfHandcraft]

Thank you very much!

[@lucieleimbach]

Looks better than if we’re brand new. Nice job.

[@DrHutOfHandcraft]

Thank you Lucie, I appreciate your comment!

[@kaylamarie8309]

Wow, incredible! I love the character and heavy build of the old tools. I collect them when I find them. You are an amazing craftsman!🙂👍

[@DrHutOfHandcraft]

Thank you so much! 🙏🏼

[@tombarlow6176]

Beautiful restoration of a nice old retched

[@DrHutOfHandcraft]

Thank you very much mate!

[@SlickArmor]

I about retched too.

[@Austeration]

Very nice job on that one 👍also I really liked all the lathe work. Turned out absolutely amazing.

[@DrHutOfHandcraft]

Thank you very much, I really appreciate it!

[@LadyLeigh]

Beautiful restoration! The older tools were so much more robust than the newer ones.

[@DrHutOfHandcraft]

Thank you! Yes they were

[@Mitch_Bierma]

Nice! I think a brass wear sleeve would have tightened up the slop. And would have looked awesome!

[@DrHutOfHandcraft]

Indeed yes, that would’ve been a good idea!

[@michaelszabo3071]

Mmmm that would have added a nice little touch to it.

[@whocares0692]

Beautiful restoration Sir.

[@DrHutOfHandcraft]

Thank you! 🙏🏼

[@brucefreedman3655]

Awesome video. Love the finished product! 👍🏻😊

[@DrHutOfHandcraft]

Thanks a lot!

[@Painless61]

You turn scrap into a tool that looks brand new. Awesome 👍🏽

[@DrHutOfHandcraft]

Thank you!

[@stephenviola9204]

Amazing what you can do with the right tools and incredible skill!! Beautiful!

[@DrHutOfHandcraft]

Thank you so much!

[@remyaworld1]

Im always amazed how much effort you guys on KZbin put into this worn out tools to make them look great again. These tools in general don't look like they could never be used again. But with a little hard work they are now ready to do their duty one more lifetime. Thank you for sharing this with us ❤️

[@DrHutOfHandcraft]

Thank you very much for your kind words 🙏🏼

[@thomasmartin4591]

Awesoome video what did you use to blackin or patina the parts?

[@DrHutOfHandcraft]

@@thomasmartin4591 It is called bluing, in this case cold bluing. There are many different methods of bluing

[@thomasmartin4591]

Ty....I apreciate you're reply..awesome videos

[@DrHutOfHandcraft]

@@thomasmartin4591 🙏🏼

[@diyresttube]

Nice restoration ...I love the outcome of your work.

[@DrHutOfHandcraft]

Thank you !

[@jgar6643]

i like the sound of ratchets... and the older ratchet it has a sound of wisdom to my ears... its reminds me that there is always a tool to do the job inside ur garage.

[@DrHutOfHandcraft]

Thank you for your comment!

[@johanschoeman869]

As good as new. Glad to see that you got the wobble out of you steel brush device. Nice job.

[@DrHutOfHandcraft]

Thank you! Yeah it was the steal brush that was wobbling around, I replaced it..

[@rubenbernal9244]

Very nice job; man; and the socket looks awesome in that ratchet... together they look really solid. Warm regards from Mexico.

[@DrHutOfHandcraft]

Thank you very much, I really appreciate it! Much love from Germany

[@briansworkshop01]

Fantastic job and video great Finish it looks amazing thanks for sharing your time 🍺🍺👍👍

[@DrHutOfHandcraft]

Thank you very much and thank you for your support! 🙏🏼

[@themrdominic1]

Love to see how different tool designs evolved from this and so cool to see you bring this guy back to life

[@DrHutOfHandcraft]

Indeed it is! Thank you for your comment

[@jamescaron6465]

I like the fact that you blew Ed all the working moving parts that was a very nice design decision, and it looks great

[@DrHutOfHandcraft]

Thank you!

[@ebbios]

Wow...juggling between study, work and making content. Gotta say you have a bright future friend. Wish you all the best. Thank you for sharing this restoration project. Beautifull old iron I must say

[@DrHutOfHandcraft]

Thank you so much for your kind words, it’s much appreciated 🙏🏼

[@c.j.cleveland7475]

Nice job on the restoration, Doc! I don't think it looked that good when it was new. And thank you for not over restoring it so you can't actually use it because "it's just too nice." 😁👍

[@DrHutOfHandcraft]

Thanks a lot! 🙏🏼

[@jacquelinelayne7702]

"THE RE-ANIMATOR'. beautiful restoration ❤

[@DrHutOfHandcraft]

Thank you! 🙏🏼

[@MNDashcam]

Great job!

[@DrHutOfHandcraft]

Thank you!

[@user-eo7tc2ik9w]

Щедрівка наприкінці просто супер. Дякую.

[@benjleath9406]

Cool video man, they don’t make things like they used to !! Some of the Rubbish I’ve bought in the past doesn’t last two minutes, that ratchet will last you a lifetime ! Great video and thanks for sharing 👍👍😀

[@DrHutOfHandcraft]

Yes this ratchet is so massive, it will definitely last a lifetime! You could probably do pull-ups with it 😂 thanks for your comment! 🙏🏼

[@bigfysh]

Wonderful shot of the safety shoes at around 5:30

[@DrHutOfHandcraft]

Never wearing safety shoes to be honest 😄

[@garyostrander2507]

VERY - VERY - VERY - NICE = I dought that the wrench ever looked so good

[@DrHutOfHandcraft]

Thank you so much!

[@Maniacfusion69]

That was so damn good… honestly didn’t think it’d turn out as nice as it did… you’re seriously under subbed ( new sub)

[@DrHutOfHandcraft]

Thank you very much for your support and your kind words, I really appreciate it!

[@art1muz13]

Very impressive job, sir. Love this ratchet ! I am really impressed! I know you're good at it, I didn't expect that! ! I think a brass wear sleeve would have tightened up the slop. And would have looked awesome!

[@DrHutOfHandcraft]

Yes that would’ve been a good idea! I’ll remember it for the next time! Thanks a lot!

[@riyazsu6376]

The humour in your videos remind me of the Nekkid Watchmaker 😂

[@DrHutOfHandcraft]

okay, I unfortunately don’t know him 😅

[@riyazsu6376]

@@DrHutOfHandcraft you should watch it the resemblance is uncanny. I am not being disrespectful to you I genuinely chuckled watching your videos when I was reading the captions

[@DrHutOfHandcraft]

@@riyazsu6376 okay 😅

[@bmo14lax]

Oh I love ratchet mechanisms so much, It's going to be a good one. :)

[@DrHutOfHandcraft]

🙏🏼

[@pascaljeske7307]

A very good Job Love it ❤️👍❤️

[@DrHutOfHandcraft]

Thank you mate! And thank you very much for your support!

[@DrMrSmooth]

Nice restore

[@DrHutOfHandcraft]

Thank you very much! 🙏🏼

[@mikehorb9485]

Yo is that a 7 tooth ratchet!!!! That thing must be way smoother than my 5 tooth!

[@DrHutOfHandcraft]

😂

[@gbrooke5580]

You did a really great job on this project. Plus the video quality definitely set you apart from other channels.

[@DrHutOfHandcraft]

Thank you very much for your kind words 🙏🏼

[@WeGoWalk]

Nice job! If it were mine, I think I would’ve nickel plated the main body to keep it from rusting.

[@DrHutOfHandcraft]

Thanks mate!

[@loydevan1311]

Putting all that work into the restoration, which was fantastic 👌, I agree all metal surfaces need to be nickel treated and not just oiled.

[@loydevan1311]

I say again. Excellent video. Respectfully submitted.

[@DrHutOfHandcraft]

@@loydevan1311 thank you very much! 🙏🏼

[@jamesrichardson771]

Wow💥 turned out gorgeous !! 🔩

[@DrHutOfHandcraft]

Thank you very much!

[@DrHutOfHandcraft]

Thank you very much!

[@weekendstuff]

Very good rebuild and video. Thanks for sharing.

[@DrHutOfHandcraft]

Thanks mate!

[@marcosfugiwara3238]

Você é muito bom, parabéns 👏👏👏🇧🇷

[@DrHutOfHandcraft]

🙏🏼🙏🏼

[@janbill79]

I like the black wheel shine. I've never seen a ratchet that looked like that, where the center drive pulls out. Looks like a nice useable ratchet . I don't know how it compares to modern ratchet. or ones from the 1970's or 1980's. My favorite 1/2 " drive ratchet is a Stanley pro. easy to change directions , from the way they built the thing you push

[@DrHutOfHandcraft]

Thank you very much for your comment!

[@texasrattlesnake31637]

Great restoration Doc! 👍👍👍

[@DrHutOfHandcraft]

Thank you so much! 🙏🏼

[@davidcoats1037]

Well done! She’s a beauty 😃👌🏼

[@DrHutOfHandcraft]

Thank you! 😄

[@ravendark2422]

You should’ve cut a bit out of a cheap paint scraper to replace that pitted part but great job anyway.

[@DrHutOfHandcraft]

Thank you for your comment! I actually made a new part but then decided to keep the old one to keep it’s character.

[@perryberens618]

Knowing how to operate the restoration tools and chemicals . Thanks for sharing your knowledge. The tool turned out fantastic.

[@DrHutOfHandcraft]

Thank you very much!

[@ARUSApacecarHAMPTON]

You just brought a tool out of retirement for another 100 years of service.

[@DrHutOfHandcraft]

🙏🏼🙏🏼

[@wayneandrus240]

Excellent restoration. Love this stuff!!

[@DrHutOfHandcraft]

Thank you!

[@matthewsimmons8644]

I plan on subbing directly after making this comment but this is awesome! I’m not sure if I’m the only one but if you were to learn clocksmithing and do some restoration that would be fantastic! My grandfather was a clock smith for the better part of 50 years and now my dad has taken it over. One day I will too. Look forward to watching more videos!

[@DrHutOfHandcraft]

Thank you for your support! I actually did some minor stuff on clocks before, but just for my own ones or for friends/family. Maybe one day I will try a whole restoration on one 🙂

[@mikeburnett7028]

Love watching you work

[@DrHutOfHandcraft]

Thank you very much, I really appreciate it!

[@northwesthome4692]

This one was an easy one. Great work

[@DrHutOfHandcraft]

Thanks 🙏🏼

[@johnconnor555]

I like how you did'it , well done. Final result is amazing ,you're good ,really good but why so few posts, something is missing to increase the number of views and subscribers. 👍👍👌👌❤❤❤🙏🙏

[@DrHutOfHandcraft]

Hey mate, thank you for your comment, I really appreciate it! Well yes I am trying to increase the number of videos, but I am doing this while going to the university and work, so it is pretty hard to upload more videos. And of course I want to present good content, not some stuff I just worked a couple of hours on.

[@johnconnor555]

@@DrHutOfHandcraft You're right, now I understand you ,what can I say...do the right things !!!

[@DrHutOfHandcraft]

@@johnconnor555 I will try my best to produce more content! Thank you for your support!

[@terryegan3831]

@@DrHutOfHandcraft If you continue to produce more content with interesting items I guarantee that your channel will spread like wildfire. You, are good. Very good. Take it from a restorer and restoration channel critic. Best!

[@DrHutOfHandcraft]

@@terryegan3831 Thank you very much for your kind words mate, it really means a lot to me! I will try my best, but like I said, there is work, university and much more 😅

[@rap31264]

NOICE!

[@DrHutOfHandcraft]

😄🙏🏼

[@chrysny413]

Very Mymechanics vibe to your style. Can’t wait to see more!

[@DrHutOfHandcraft]

Thank you for your support!

[@antonioirineudemoura991]

Gostei muito 👏👏👏 🇧🇷

[@DrHutOfHandcraft]

Obrigado 🙏🏼

[@nicovandyk3856]

Awesome video as s as always and happy to have Mr. Patina in the mix! Question: In this video, you used two different processes for rust removal (Electrolysis and acid): How do you decide when to use which? 🤔

[@DrHutOfHandcraft]

Thank you Nico! Good question. In this case it’s not very exciting, it was just because I didn’t have enough acetic acid to fill the box with it. But there are some things to consider when deciding which method you use. When I make a second channel one day I will make a whole video on that!

[@nicovandyk3856]

@@DrHutOfHandcraft : Thank you very much! Another one which I would also want know is when you select cold vs hot bluing 😉

[@DrHutOfHandcraft]

@@nicovandyk3856 I personally prefer hot bluing rather than cold bluing because it’s cheaper, eco friendly and a lot faster. But cold bluing is good for bigger parts , on which you can’t (or at least I can’t because I don’t have a powerful burner) achieve an equal temperature everywhere on that part. I also use it on heat treated and hardened parts and thin sheet metal, since hot bluing could damage the heat treatment and bring sheet metal out of it’s form.

[@nicovandyk3856]

@@DrHutOfHandcraft thank you soo much for your response: That makes soo much sense (Almost embarrassed that I could not figure that one out for myself). Keep well!!!

[@DrHutOfHandcraft]

@@nicovandyk3856 You are very welcome and thank you for your support! No reason to be embarrassed, I also had to learn this stuff somehow, since I am not a mechanic (this stuff is only a hobby for me and not my job) and come from a completely other work field and I still have a lot to learn! 😄

[@CrotchetRocket]

Bro with the closing I was so scared you weren’t going to show it in action!😅

[@DrHutOfHandcraft]

I always show them in action 🙂

[@DaveTheTurd]

Beautiful work.

[@DrHutOfHandcraft]

Thank you 🙏🏼

[@jeromebarois1875]

Nice job, as usual 👍 Strontium chloride for the red flame? (Ok, I googled it 😋)

[@DrHutOfHandcraft]

Thank you very much! Close, it was Strontiumcarbonate, but you are right, Strontium is the component that makes the flames red. Strontium chloride would make it red too 😄🙏🏼

[@corywagner46]

Lithium salts will too but it will be reddish pink

[@Jettaheizer]

A really nice video of a really nice restoration! Just two little things: 1. the ratchet has a lot of play, maybe it would have been a good idea to turn the head (or what it´s called) a little smaller and make bushings for it. 2. the christmas music at the end (carol of the bells) is a little bit strange for a video postet on march 12th. ;o) Anyways, you´ve got one new subscriber!

[@DrHutOfHandcraft]

Hey mate, thank you for your comment and support, I really appreciate it! You’re right, the ratchet has some play, but it had the play before and I didn’t think of the solution you suggested.. I will definitely consider that in the future! You are not the first one to mention the christmas music 😅 I really didn’t know that it is a christmas song, because it’s not that popular in germany, I just thought it’s nice 😄 Thanks again! 🙏🏼

[@busybee6889]

lovin the sense of humour in your videos

[@DrHutOfHandcraft]

Happy that you like it! 🙏🏼 thank you!

[@giorgosslayeridis1997]

That is beautiful work. I admire your dedication, sir. Well done!

[@DrHutOfHandcraft]

Much appreciated, thank you!

[@crazylaceashira]

I did look it up after but my guess was lithium

[@DrHutOfHandcraft]

Lithium is correct, but that’s not what I used. That is the other correct answer I mentioned 😄

[@antoniocrespo4441]

When he said dont try this at home, I followed the rules. Tried it when i was 12 in a camping trip with a lighter and some off, my cousin got a lit haircut

[@DrHutOfHandcraft]

Oh wow 😅😅

[@victorjeffers1993]

Looks great ! 👍👍

[@DrHutOfHandcraft]

Thanks 🙏🏼

[@geedub7912]

Beautiful!!!!!!!!!

[@DrHutOfHandcraft]

Thank you! 🙏🏼

Like

[@DrHutOfHandcraft]

🙏🏼

[@johnalecsscalemodeling]

Very clever video!! So enjoyable - cheers

[@DrHutOfHandcraft]

Thank you very much!

[@HanyMoh2017yt]

Wow good job 👏

[@DrHutOfHandcraft]

Thank you very much!

[@peterbeley3067]

wonderful job

[@DrHutOfHandcraft]

Thank you!

[@niloofarsadr4649]

Das ist so ein Genuss immer😍

[@DrHutOfHandcraft]

😄 danke 😘

[@fredbrooks1386]

Beautiful!

[@DrHutOfHandcraft]

Thank you!

[@jeffwagner7946]

Beautiful work

[@DrHutOfHandcraft]

Thank you! 🙏🏼

[@chadwedul1787]

What an elegant piece of machinery.

[@DrHutOfHandcraft]

That’s so true!

[@jalton9416]

Awesome work.

[@DrHutOfHandcraft]

Thank you! 🙏🏼

[@derrineckelmann3523]

Great restoration !

[@DrHutOfHandcraft]

Thank you!

[@ferragus00]

Ready for another 100 years. That for sure!

[@DrHutOfHandcraft]

I hope so 😄

[@fumeti4197]

Awesome job

[@DrHutOfHandcraft]

Thank you very much! 🙏🏼

[@mr.hustlaelsuperior8293]

Great progress

[@DrHutOfHandcraft]

Thanks!

[@mikecorrado4971]

Wonderful attention to detail.👏

[@DrHutOfHandcraft]

Thank you!