Drift Car Build: SC300 Ep4

[@Conker999]

I'm glad SCs are getting some more spotlight

[@rustyshackelford8758]

That red supra in the back looking spicy 🌶

[@MRCRASHOUTT]

Yessirrr

[@DieegoSC]

everything on this channel is extra clean. love it

[@darrenliggett7222]

Dan, talk to Hert form the Hoonigans, he was going to turbo his N/A 2JZ Lexus GS300 but then swapped the motor for a GTE 2JZ. He had a manifold and all the parts sitting in his garage?

[@CPTSaveAHoe247]

He did a GTE swap but Stayed with the GE Head so he used all the GE stuff he originally had

[@justinmalone8518]

I had a sc with a 1.5jz. 2j gte bottom end. Such a fun car!

[@RADIndustries]

That’s a perfect one, I bet you miss it

[@justinmalone8518]

RAD Industries for sure, that was my poor guy supra lol

[@rhysphillips3818]

It's going to be awesome to see Renee learn how to drift now

[@MrStonedBuddha]

Dan, on my JZS147 GS300 the only wire I had to swap for the manual transmission swap was pins 5 and 6 of connector P1; which looks identical to the one you pointed out. Although on my car it was Black/white and Black; but in the same pin positions you looped. You can either loop them or run it to a clutch switch. Also if you want reverse lights assuming its' the same, it is pins 4 and 8 on the same connector connected to the transmissions' reverse light harness.

[@Zinstalls]

Great Vid! Whenever Dans happy, that’s when he paints the real picture. He takes us on a verbal journey, then he escalates lmao really enjoyed the videos, Thanks guys for everything

[@RADIndustries]

Haha, you know me well. Thanks for watching Bud

[@NightcrawlerNC]

What kinda diff do u use for that soarer?

[@RADIndustries]

I just welded the diff

[@MrSpitfire510]

You can run a 12v motor controller for the valve on the steering rack to have it assist when you turn. I run one currently and it has made a difference low speed turning.

[@RADIndustries]

It’s stock, it still has the OEM plug. It was just not bled all the way. We got it going pretty well

[@jscoatings1207]

Good stuff! Just got a 93. Super pumped!

[@leezykp]

i love your shop ,,,my garage is a baby step to your shop,i own both sc and a mk4 supra, and doing a drift sc build right now

[@Alientraveler003]

You put so much cool stuff in your videos

[@Alientraveler003]

Woh you got the head gear and the flashlight , lovin the check list too

[@StreetTsukuru]

Turned out so sick!

[@TheEdiaz1987]

Sweeeeeeet!!! Can’t wait to see it in person 🤘🏾🤘🏾🤘🏾

[@sotearyuk05]

Awesome build... Can't wait to see more

[@Jovandesire]

Paint job next 😍🚗🚗🚗🚗🔥

[@arn6376]

Dan’s videos are straight fire 🔥

[@WillCouch]

You and Renee are the coolest!

[@RADIndustries]

Thanks man

[@zimble]

You're not dumb building on this car haha this is awesome!

[@mndlessdrwer]

I'd hold onto the carpets and try to make them work with the mods just because carpeting is a cheap form of sound dampening, which is very nice to have on a road car.

[@williamguldager]

Hey Dan!! Supra subframe is a direct bolt on om the sc300 if you want to change to some great adjustable arms.

[@chriswhalen748]

I have stock stuff for all the ac controls the whole module and little rid bits if you need anything I’m not using any of it, I will let it go for next to nothing

[@chriswhalen748]

I actually have tons of parts you can look through, I have two SC’s if you need to pick through anything

[@RADIndustries]

Thanks Dude, I’ll let you know

[@andrewkitchens3917]

Aye we got the same timing gear cover! I had to find mine

[@driftstunes1519]

I learned that rear arm situation the hard way. Literally why my rear wheels tuck now. I made the mistake of getting Supra rear uca's from Drift Works. When I got the camber right the wheel fell out.

[@tonkpils707]

Have treadstone bring the production of the 2jzge turbo manifold back in stock. Maybe a version 2.0?

[@RADIndustries]

That would be cool

[@RipstickMaster1998]

This should be a budget build where you build it with whatever turbo and other parts you have laying around

[@RADIndustries]

That’s an idea I had but it just hasn’t happened yet

[@theWesHatch]

Keep it up man!

[@emiliochignola4383]

If the steering still feels a little on the heavy side - measure voltage on that rack solenoid at idle - If it’s anything like Nissan speed sensitive steering on r32/33/34 that solenoid should receive around 5-6v at idle/low speed and slowly decrease as wheel speed increases, down to around 1-2v at 100km/h - it’s used to allow light steering in car parks/low speed and heavier steering at high speed for more stability, but it requires input from your wheel speed sensors to function as per factory - Can fit an adjustable voltage step down converter and tweak the power input to allow more flow through the rack/tune how light you want your steering to a degree 😎 Keep up the rad work! 🤙🏾🤙🏾

[@RADIndustries]

It’s been ok, but I’ll look into that

[@tazclaw]

You mind sharing the SC300 driveshaft measurements for a ZF trans? You think those measurements would work for a SC400 with a 1uzfe?

[@quicktechautoelectricsairc6807]

We are in the process of building a Soarer drift project which is running Wisefab front. Just wanted to know how you've gone for clearance on the back of the front tyre against the front fender? What front tyre size are you running there also?

[@shawniebeans8382]

Custom wide fenders soon? (rocket bunny looking )

[@RADIndustries]

No, that’s so much work

[@shawniebeans8382]

@@RADIndustries dang ok. Car has a great stance and would look sick. Strange how no one has made a kit with that style for this car, with the popularity its getting in the car community. Well your build is looking good. Motivating me to put my time into my SC.

[@BK0924]

I have a manual swapped ls400 and I jump my park neutral switch with a fuse I need to make something better but it works

[@RADIndustries]

That’s a pretty easy way, if it’s working just leave it

[@BK0924]

@@RADIndustries it has some wiggle room so some time it does and some times it doesn't work

[@samuelmancia7360]

Custom wide body on the sc?🤔

[@RADIndustries]

True

[@jefferyserrano1964]

Need to get wide fenders

[@tylerjohn97]

gotta start using them p clamps right! they gotta hang from the bolt not sit above it

[@RADIndustries]

No way dude. I use them both ways. Depends on the the area. In this case I wanted the clamps in this direction. I flip them over sometimes as well if it helps clear things in the way. The purpose of a p-clamp is to hold the given item in place. That’s it. If I was to only use p-clamps in the so called “right way” hanging from the bolt above. They would only be used on very rare occasions. But they are all throughout every car I build and the shop builds. Never had a p clamp failure yet.

[@wadepreston5298]

Leave it the stock color and call it Sandy 🙌🙏👌🏁

[@RADIndustries]

This is my favorite suggestion so far. Might do it 😎

[@wadepreston5298]

@@RADIndustries always loved the SC400 I think it would be a great platform for a drag car also👍🤘✌️

[@wadepreston5298]

@@RADIndustries your work is freaking amazing,and always like seeing Renee 😉🏁🏁🏁 can't wait to see her behind the wheel!!

[@zmohan69]

Theres a company from poland that makes rear arms for that. My buddy dave dembroski has them. He talked to u about that ps solenoid. Ask him the name of the company.

[@RADIndustries]

Ok cool, I’ll look into it

[@darrencamou4754]

Send it🤙

[@W2TW]

sc feels great sideways. not a dumb build IMO.

[@blakesupra4440]

where did you get the steering rack rebuilt?

[@mv6160]

connect NSW and STA pins together

[@RADIndustries]

Are these the two I connected, or is that an even easier route to go about it

[@mv6160]

RAD Industries I did same way you did, later on somebody told me, that it can be done connecting pins to run auto ecu in manual

[@benmeyer9368]

i want to know if you are leaving the stock vvti rods in the n/a because i am about to start my n/a-T build on the exact same motor in my gs300 so i will be following this very closely

[@brettdotcom14]

Hey dan what wheels do you have on there and what are the specs?

[@RADIndustries]

Rays 57CR 17x9 +22 fronts and 18x10.5 +22 rears

[@monstersquashracing]

Great video👌👌👌👌👌

[@doomango597]

Awesome :D

[@danielabarcada2012]

🔥🔥🔥🔥

[@spenserdenovich1678]

I'm having an issue with my 99 sc300. It died on me a while back and I'm able to get it to start but It wont stay running. Has anyone had/know how to fix this

[@Boostgravyy]

Still wanna know what this intro song is lol

[@chrispyfryguy]

I used shazam. the song is called "The World Doesn't Care" by Dazed Marrow

[@SDSBBQs]

*I name all of my grills and smokers... Just like Renee said... the name will come to you don't rush it. If it didn't immediately come to you let it grow on you and the name will fall in to place!*

[@honestredneck580]

Yall should name it fancy blue especially if its gonna look like the 2 supras

[@liamporter1297]

what about the name "SCary slow" ???

[@juliocortez5398]

Call it the Messy300

[@Singlecam96]

Call it “ lil bit “

[@BMXAndy1994]

Name for it? Theres big blue, Baby blue. So big bird

[@RADIndustries]

Lol, hmm 🤔

[@timtiminy]

Name idea: Angelica (think Rugrats lol)

[@RADIndustries]

Nice 👍🏻

[@kelevra558]

Name the lexus Han Solo!!!

[@waynesalter908]

Wrap it blue and call it midget blue

[@Jovandesire]

Paint 🎨 it white bro 🤍

[@brettdotcom14]

First off no drift car project is cheap. Drift cars go through a ton of abuse. Another good platform with a 2jz is an is300. More and more companies are producing parts for both chassis. He got the sc300 because the chassis is very close to the Supra he’s very use to. Realistically you can do this build for well under 10k You can pick up a running manual sc300 for 2k If you cant find a manual swap to factory or the way he did it can be had for $1500 or less New clutch $500 Weld diff free or 50-100$ if you can’t do it Bc coils 1k Hydro brake $200 Hydro bolt on bracket from battle version $150 and you can use a 2nd pair of sc300 rear calipers from the junkyard for $50 build your own brake lines for $50 eBay intake $50 not necessary Cat delete cheap not necessary Bucket seat and rails $800 not necessary Also you can add a decent amount of steering angle by modifying the stock knuckles or send them to pbm and they’ll do it for $250 He’s just successful and a pro drift car driver and has his own shop so he has a ton of sponsors and a ton of extra parts but totally doable for cheap.

[@RADIndustries]

Thanks for the extremely elaborate breakdown 👌🏻. You nailed it

[@blakenflams]

you cannot find a manual sc300 for 2k lmfao

[@brettdotcom14]

keeko yea you can I bought mine for 2k. 1992 factory manual running and driving

[@eliyesovitch7087]

@@brettdotcom14 Maybe in Florida but in California... no way you can find one for less than 4-5k

[@KrucialKB]

Let me buy your Door panels por favor...

[@rainshadows7086]

just call it the soarer

[@addicted2fuel]

It's a SC300 so name it the Sideways Coupe

[@bigmikepimp2003]

It needs to be painted blue. NAME: TINY BLUE

[@RADIndustries]

Lol that’s a good one, if I ever paint it that would make perfect sense

[@brandon2jz]

Ill sell you my bomex front bumper lol i also have some kbd overs and i had 2 SCs named them both lexi cuz why not its a lexus

[@RADIndustries]

Not a bad idea

[@anthonyciccariello8089]

Why is it that when somebody says they're going to do a budget drift car, it ends up turning into a $10,000 bill

[@RADIndustries]

Sorry dude 🙈, without my shop tools and equipment and sponsored parts it would have ended slightly different, but it’s still a simple enough build

[@anthonyciccariello8089]

@@RADIndustries I'm not mad at you

[@bulletholez]

Ol fella looks like a "Tucker". No good reason behind it.

[@umana93]

No offense but just cause you have a shop and lots of cool cars around to work on etc. doesn’t mean you make good content.. shits boring af