DRIFT TRUCK Gets a MAJOR Suspension Upgrade - Custom Panhard Bar

[@TheVoid435]

“Looks like I’m welding my schlong”-Gingium 2019

[@bovolino0149]

TheVoidWalker435 schmall**

[@jacobtighe3234]

Gingium: "still haven't found a hammer" Also Gingium: *uses hammer to shape brackets*

[@mathiasmang848]

Maybe because he found it afterwards?

[@KK001]

@@mathiasmang848 nah i dont think he found it

[@migueldenboer5186]

When does a update on the dadsun come? Im so excited about that car to be fully restored!

[@_Gingium_]

Soon! We're waiting on some chrome to be restored!

[@470whp-deathtrap]

Gingium is this gonna be like a *Molly's new engine* "soon" or actually soon? No hate just wondering

[@hetism]

@@470whp-deathtrap soon

[@boosted_john]

Words cannot express how grateful I am to have you as a friend ❤️

[@150limited]

no one: me when im home alone: 11:26

[@TheWolverine-rm2kr]

Yea, I sand my dick smooth when I'm home alone too!!

[@uglymiata9071]

Nah sorry I gotta pull out the grinder

[@deangelolawson6184]

One of my favorite builds. Always has me dreaming about everything i need to do with my truck

[@samuelaudet845]

3:25 compilations of tools not being used as they were designed XD

[@thomashixson8572]

Every time I see this thing in a video I can't get over how good it sounds

[@keithperonilla8414]

Same!

[@theginjaninja132]

@Matt's Gaming/Vlogging Channel 100% the correct choice of motor

[@zippyoya]

Update log 10/26/19 Drift truck -fixes bug where the back suspension would move -adjusted shock dampening Other -shouted out the best KZbinr boosted John -added epic Fabium montage -added hammer back -added 10 foot shlong/vape

[@Cobra_427]

here before the update log was filled out

[@_Gingium_]

2nd best KZbinr* Gingium is #1

[@jacobshaw1547]

your back!

[@dandanthebabyman]

zippyoya -hammer files corrupted -hammer files recovered

[@perfectentrytrading]

@@_Gingium_ now 3rd best pasha just overtook

[@Metalcop5150]

Couple of things I noticed: When installing suspension/braking/steering bolts I always use the aircraft standard, for their orientation. Meaning that you should have installed the panhard bar bolts, from the top, so that if the nut ever came loose, gravity would hold the bolt in place. All your bolts threads should point to the rear of the truck, for direction of travel, or down towards the ground to use gravity. Whenever possible, of course. The other thing, and I'm not so sure it's important for your drift truck; panhard bars are usually filled with lead shot or sand etc. to eliminate noise, vibration and harshness (NVH) being transmitted into the passenger compartment. Might be a cool video, filling the panhard bar with lead shot!! Great video, btw. Keep 'em coming...

[@VS666]

"brackets" project binky: *heavy breathing*

[@Avetho]

XD _[funk starts playing]_

[@SailingFrolic]

Caleb, seeing all those sparks at 4:19 flying towards those clearly flammable cans made me really want to remind you that *you have already had a vehicle catch fire before*. Invest in a fire safe flammable cabinet. They're not very expensive. And it will save your shop and all your cars if one of those sparks decided to puncture the can and explode it. Propellant cans are insanely flammable.

[@CarsOverdose]

That action music and those cinematics made me ROFL. But it made you look 100% professional for sure lol. Plus it gained you +50XP 😂

[@GoblinGamers02]

I came from the video of you drifting the open diff rx7 and messing up but you just accepted it and said you need to learn I respect that. I think you got a subscriber.

[@keithdosik]

Oh I needed something gingy, I am feeling horrible this weekend

[@_Gingium_]

Sorry to hear that :( Hope you feel better soon!

[@asiakunnossa666]

You need to also remember to enjoy your cars instead of only working on them :D nice vid though, loved those tig welds on the panhard!

[@willpernal6229]

Love you videos and your dedication, you’re and inspiration.

[@_Gingium_]

Thank you

[@michaelgabbard7178]

It might be because I’m drunk and high but you make it seem like miracle and I appreciate the greatness

[@FabifeatIPhone]

Crazy how you stepped up your overall skills, congratulations bro!🔥🔥🔥

[@TheWolverine-rm2kr]

I just noticed Gingium bolted down the vise!!!!!

[@supercarmio]

sick episode man! change of pace at 6:42 was 🔥great work!

[@Jayblack2120]

Bro I Fr think gingium is the best spray painter ever😂🤟

[@mrnege81]

I believe that you should get a plasma cutter. You fab so much that it will be easier and faster than grinding everything. Nice work anyway. Keep going!

[@TheWolverine-rm2kr]

12:58 you should patch those 2 square holes on the back of the truck where the bumper uses to be

[@2pack4norbi]

Oh yeah! I love seeing when you are fabbing stuff. Great video Gingium. :)

[@jaymiesawyer2662]

Would a 4 link triangulated suspension be better? Then no panhard bar? Just curious ;)

[@roachwerks3043]

Since nobody ever answered, no, not necessarily. It takes a lot more work to get the proper roll center, that is the axis that the axle rotated about. And it’s Also counting on the rigidity of the suspension links and all the mounts. You can’t beat a direct acting panhard bar from the frame to the rear axle for both rigidity and easily adjustable roll center. This design from the original kit is really poor, and like a bare minimum for keeping the axle in line

[@ImLostInLimbo]

Hey Gingium you should put the bolts holding the lanyard bar in from the top instead of the bottom that way if the nuts ever come loose the bolts won't fall out

[@RantzCore]

That is quite a difference in diameter! Glad you can improve the build to perform better and do it safely.

[@tylerbryan7823]

I like that Masterforce drill you got! Reppin' Midwest hardware stores!

[@bigmikes2140]

Get some “Steel-it” paint don’t need to prime before painting and it last forever

[@bmxkelowna]

Put the bolts in from the top so that if the nuts ever come lose the bolts won't fall out

[@Duckmaneg]

Logan Noel was thinking the same thing.

[@NoName-mv3nk]

Thanks for making me smile and laugh,you're a great youtuber continue like that!

[@STDavis-em1df]

I know you're trying to get those angles, but make sure you boys have at least a clear uv filter on your lens when getting those close-ups. A $10 filter can save you hundreds when little shards of metal get to flying and hit the lens. 🤙🏾🤙🏾🤙🏾

[@lagulagunation]

Gingium! By experence i tell you.... You should always mount the bolts with the nut in the bottom, that way if it gets loose, you still have the Bolt in

[@thekeyboardking2928]

Your skills are improving 👌 Much love from guys who love d.i.y works.

[@chunkuswumpus3515]

Thanks to you and your amazing videos and the awesome job from fabium I have much more seriously looked into going to a welding college. Before I wasn't going to go to college but these videos make me REALLY excited to weld. Love the vids and keep up the good work

[@keithperonilla8414]

Nice to see fabium at work! ❤

[@MariaFernanda-zn2nk]

Look at @gingium tig welding! Congratulations!!!!🍾🎉🎊

[@kapys1722]

Good to see Fabium back

[@Tigermoto]

Finally a track I like on the channel. Queen of the night FTW.

[@chucko83]

Yeah HTP! Local near Chicago. I bought a welder for our mechanic in wheaton.

[@RygarTheDestroyer212]

I think that you should add a custom sheet metal roof spoiler on the back of the cab. I think like that would be super aggressive since this thing is a drift machine :)

[@pennycopperhatch9315]

Dope Stuff dude!....Wish I had the room & tools to Fabricate stuff!

[@mike.135i]

subbed for the bus. stayed for the truck!

[@KageStelhman]

I noticed that you don't preheat your joints before you start tig welding... which would explain why your beads aren't as good as they can be.

[@MrAtomic3x]

you should install the panhard bolts from the top, in case the nut unscrew, the bolt won't fall out.

[@nytovaok516]

you should install the bolts from the top in case the nus come loose. if the nut comes loose and falls off the bolt will stay in the hole and not get destroyed

[@elitesbeast9183]

on the panhard bar i would put the bolts though the top so if the nuts fall off the bar doesn't make a mess

[@dkinley334]

Tig welding is so relaxing to watch

[@victor440_]

That was a very good upgrade great job 👍 thanks

[@brianpardee1281]

Damn that new track bar is overkill, really good to make it beefy but too beefy is bad too

[@treykneller2027]

side skirts? and you should fab a defuser or you should do a rear bash bar. keep up the work its turning out dope

[@rlscustoms]

Money shot right there, so bad ass 13:48

[@adept7709]

You should get a Milwaukee portable band saw and the table jig so you don't have to use grinder for everything. Taylor Ray has one and he uses it all the time when he's going to tig stuff.

[@matthewwandrey1287]

Is this a Gingium video in my bday?! Awesome vid Caleb!!

[@nickmorrison5856]

Happy b day

[@YesSir34]

such a cool dude, you do great work! keep the content coming sir!!

[@Zaaf2003]

The rock n roll is different... I like it

[@GhostieXV]

Serious question why do you still have 2 plates on the back end of the drift truck??🤔 Love the videos as always tho lol

[@quancast1141]

Ghostie & Friends just about to ask

[@firsttimediesels6289]

Keep up the good work, love this vids been following since you bought Molly

[@baddonkey6876]

I still think a parallel panhard mounted behind the diff would serve better than a track bar and mounting your shocks at an angle with the bottom end towards the wheen and the top towards the center

[@SurferKenTV3]

Next vid: “So I decided to weld my schlong.”

[@lucassanches3568]

*(gone wrong)*

[@onlyetm]

I Really like all the work you have done to this truck but why didn't you go IRS, their is an Local S10 to me that swaped to IRS as with the Axle you have no side bit. Would good for tire ware. Grip is Fun in Drift.

[@macaulayholland3516]

just subscribed to johns channel for u gingium. good jjob on the drift truck

[@Smart215]

Suspension bolts are supposed to go from the top down so that if the nut gets lose it does not disintegrate immediately.

[@dustindemkowski2939]

Pro tip grease all the threads on the Heim joints to keep them from Seizing

[@GODOFGUITAR2112]

Another fabrication tool that would help out a lot would be a metal cutting bandsaw. No more cutting metal with the deathwheel and much cleaner cuts

[@TobyBurt]

Always put suspension bolts in from the top so if the nut comes off you are less likely to have a complete fail or at the very least not have to buy a new bolt.

[@andrewkitchens3917]

The pause at the beginning had me dead lol

[@derekhansen6652]

Now your panhard bar is beefier than the 4 link bars... Can get more Tig practice making new 4 link bars to match, and have a heavy duty suspension upgrade. 👍

[@kim.w1471]

YOU'RE AWSOME GINGIUM!!!

[@smilesfourmiles2714]

Of course I’m a little surprised you didn’t notice this problem before hand installing it but love what you do keep pushing One more thing get a proper hammer 😂

[@evannoriega-thomas371]

I like the change up of music

[@Conman-xc8px]

Good job wish the music really went with the time elapse and what u were going. High quality as usual keep it going

[@newgammer101]

Idk how well it would work for drifting but you could make your two upper control arms tie in to the diff and remove the pan hard completely

[@carshowkid51]

Question for I guess anyone but specifically gingium, how do you measure for the correct length for the bar so the axle will be centered. Like from back of wheels to frame? Or where do you measure on axle?

[@brianz2432]

I like how your like the only KZbinr that drifts a minitruck 🤙

[@ae86hachi]

Search drift truck on KZbin and you'll see just how woefully incorrect you are. Tons of builds out there.

[@brianz2432]

@@ae86hachi yea but gimgium gose more in depth

[@Jacob._.0619]

11:28 nice 👌🏻

[@offroader23]

please make some black plates for that rear, you need to cover those bumper mounts!

[@Zyno69]

Anyone know what the name of the background song is, it comes up in the end aswell. I checked the channel for royalty free music he has listed but i couldn't find it there.

[@gabekiakojori2392]

The music and editing in this video are really great. Along with the enjoyable content, they make for a brilliant episode and a solid KZbin Channel. 9:44 was cringey tho

[@arturohernandez376]

stiffing up the front soften the rear well make the truck better at getting that grip for them drifts

[@patrickcarlson9324]

Top quality content.

[@thatmand4542]

11:28 After that Calebs face though Lmao XD

[@ClockworkNinja24]

I was going to make a comment about the steering wheel when you mentioned it. Good eye

[@pietarisalminen2250]

Damn the truck looks good

[@lazlomiskolczi5217]

Make a Dodge challenger hellcat style light for the one that is removed to get airflow to the intake ! That would be really cool !

[@osmiumviii4193]

If John gets to 5k subs, Gingium has to get a drill press.

[@QuiickGamin]

I think you should paint that bar red!

[@bakkywlu326]

Lmao i was literally half dead an hour ago wondering "what kind of fun things is gingiumbdoing right now?" Yeet now i know

[@illfox240sx6]

damn that's a nice bar

[@TheCalvinSkinner]

I wonder how it would have done with a panhard bar parallel to the axle

[@ContasYT]

Would love to also see some visual mods to the truck, and the bent antenna is triggering me ahah, get something better or put the antenna somewere else :b

[@vegas_the_trucker1595]

Should always put the nut on the bottom so that if it backs of the bolt stays in the hole

[@sherkoperko]

if i where you i would put the bolts in from the top of the bracket for the panhard bar if possible, if your nuts "wiggle" lose the bolt will fall out but not of its the other way around. i hope you understand what i mean xD

[@_Gingium_]

That is true, but those brackets are already the lowest part of the truck and they sometimes scrape of stuff. If I had the bolt pointing down it would scrape on EVERYTHING haha

[@messerschmitt_bf109]

Fr tho john makes good content

[@seanspeakers]

That Daniel Caesar type background music 👌🏼

[@rami8975]

lol im even squinting my eyes when he is welding

[@kostas21_]

Damn you are like a younger version of Stephan Papadakis!!

[@jonathanr8745]

Please cover up the holes in the rear bumper with some metall plates

[@alebone_]

The reason the bracket split is because you bent it the "wrong" way from where the cut is. I always have the cut outward