MERCH ► sammit.net FOLLOW ME ► @sammit01 I drift a completely stock 350z base model with the VQ35 HR engine. Everything on the car stock & not modified. It was the worst car I have ever drifted...
Пікірлер: 304
@240Trevor2 жыл бұрын
Here in Florida there is a ton of people who drift the Z. The formula is simple: Disable traction control (completely) Weld the diff Install coilovers These cars are a ton of fun after you get these 3 things done. Its a really awesome budget seat time car for anyone, stock power is perfect for learning and even more advanced driving. If you can afford a little extra a good seat, steering wheel and angle kit can help.
@offgridas2 жыл бұрын
I would add an oil cooler to that list, and then she'll be bulletproof
@240Trevor2 жыл бұрын
@@offgridas It’s also worth checking oil pressure on these. I have done like 5 oil gallery gaskets on these. After that these are REALLY solid.
@offgridas2 жыл бұрын
@@240Trevor now I need to go and do this on my car lol, paranoid now. Mine idles at about 2 when warm, builds quick when I apply throttle, up to about 6
@240Trevor2 жыл бұрын
@@offgridas Carful man, could cost you an engine. It’s a big job but it’s the most important thing to get done on these engines for reliability. Thanks for the sub btw! I upload weekly! If you have any questions about the gallery gaskets or other technical questions you can message me insta.
@kymmedia22 жыл бұрын
do you think the e46 is done the same way?
@hobotechMASTER2 жыл бұрын
from all the dudes who drift 350z.... just a re-gear, weld it, angle kit and youre pretty good to go. add dual pass rad, oil cooler, ps cooler and youre good to go. i just have a 13
@legacyautofocus2 жыл бұрын
I like how you just said 13, I call mine the 14 lol
@mckinnonwolf78772 жыл бұрын
I used to slide my G35 with just hitting the VDC off button and clutch kicking and it worked fine.
@pleiadianpilot50762 жыл бұрын
Don't forget cut the TCS cables in centre console
@pleiadianpilot50762 жыл бұрын
Don't forget cut the TCS cables in centre console
@mjc82482 жыл бұрын
You can always just shim the diff also if it's an lsd. I've seen it both ways.
@MistahPokeymon2 жыл бұрын
Your Z is a base edition with no LSD and yes the ebrake is in the same spot in all models
@zULTRAxNATIONz2 жыл бұрын
Yes just like he says, I have a 2008 350z but mines has the lsd cause it’s the enthusiast model
@hk200002 жыл бұрын
Japanese base model does have an LSD. Learn the jdm facts.
@zenkiethan2 жыл бұрын
@@hk20000 base models Z no NOT have vlsd from my current understanding.
@Gizawar2 жыл бұрын
@@zenkiethan only in states, US got poor versions with open diff and breaks from altima. In eu only automatics got open diff and all Zs got same brembos that are on r34
@joelgoacher16432 жыл бұрын
@@Gizawar we 100% have non lsd and non brembo 350z in the uk
@basementbanter3662 жыл бұрын
You drove into that wall. Not a tap lol.
@cd5sircoupe2 жыл бұрын
There's two ways to do it Sam: Either snip the pink wire (which I haven't done, but that's what I see being mentioned a lot) or in my experience, unplug one of the ABS wheel sensors. The sensor being broken completely disabled my abs/vdc/attesa during that time.
@Snoopmike2 жыл бұрын
Pin 69 is for HR?
@kevinmorelikekevout36392 жыл бұрын
@Eilidh Mckeeney bro what the fuck
@perspilu2 жыл бұрын
Just remove the abs fuse?
@Z06Yahir Жыл бұрын
@@Snoopmikedid you find out if it was for the hr?
@Snoopmike Жыл бұрын
@@Z06Yahir Nope. Ended up having to tune it out at my local tune shop here in SoCal @specialtyZ
@stevemainard66012 жыл бұрын
Ok Sam a few things to mention No.1 you have a base model with an open diff or a very warn Vlsd (you can shim a vlsd to tighten it up for drifting see Luke's channel) No.2 get a second fuse and cut the abs links in one so you can use it when drifting. No.3 cut the 69 pin wire from the ecu (blue with pink line) and this will negate the power cut function (burnouts etc, easy and brake lights still function) This will mean when you hit the TC button everything is off but you can swap the fuse and turn traction control back on for the drive home. No.4 The handbrake will not function for long! You need a hydro. (The Z runs an internal drum on the rear discs for the handbrake it has a small diameter and was only designed to hold the car in place when parked) if you use the handbrake a lot drifting it heats up very quick and not only stops working but can also induce cracking in the rear drum and rotor. No. 5 you should unplug the battery and then disconnect the airbag module for obvious reasons. (While you have changed the steering wheel there are 5 more airbags in that car. P.S. A quick hack for track testing stock is just to take a 10mm and pull out the 2 speed sensors (one on each side of the diff) this shuts off everything but you also have no speedo which is all good at the track. (there is no quick fix for a base model with an open diff.
@Chronx100 Жыл бұрын
Youre definately right about the handbrake thing. My handbrake was so damn worn, when i went to replace my rotors, as soon as i took the rotor off the handbrake stuff just straight fell off into a million pieces. Aint got a handbrake anymore now, i just keep it in first when i park lol.
@mr.monkeyman8711 Жыл бұрын
Do the 06 touring models have an lsd ? I can't seem to find a clear answer anywhere
@stevemainard6601 Жыл бұрын
@@mr.monkeyman8711 Yes the Touring has the Viscous lsd
@offgridas2 жыл бұрын
Take the brake light fuse out, 4th one from the left, takes your brake lights away, yaw sensor under centre console is only one thing you need to do, or you can cut either the pink or purple wire going to and or from ecu. I've only done the fuse with mine, but it lets me left foot brake without pulling power. Trippy that yours one wheels, pretty sure mine has an open diff, and it's auto and it's de, but mine never one wheels ever, hooks second hard.
@jdm603jake2 жыл бұрын
Sammit read this comment!
@abdu11ah572 жыл бұрын
Everyone: stays at home and relaxes while it's raining Meanwhile Sammit: at the drift track burning some wheels
@tyhyhh2 жыл бұрын
well when your job is to get content
@Grumpy_Stiltskin2 жыл бұрын
I love how drifters run into stuff and say "I meant to do that ."
@isaiahmiracle74872 жыл бұрын
Adrenaline=FUCK YAAAA
@vn_mq2 жыл бұрын
This channel needs more views. Such awesome content, especially for people who like learning about cars
@enz03682 жыл бұрын
couldnt agree more!
@OryanGoulbourne292 жыл бұрын
A tap is a kiss bro that made out with the wall
@7112productions2 жыл бұрын
Luke fink is the man when it comes to 350's
@pablo_vs_paul48562 жыл бұрын
SLAPtrain would define that: "JUST A TAP!" Top effort Sam Just a light buff out, needed!
@drei-kun16702 жыл бұрын
0:29 SAM HAS MADE AN ADVANCEMENT:JUST A SMOOCH FOR MINAMI, I GUESS... (Wall tap for the first time in Minami)
@STiP02 жыл бұрын
Anyone else: A Crash SAMMIT: A Wall-Tap
@wheeln24-792 жыл бұрын
Yeah you can only crumple and pull that metal out so many times before its time to cut away
@stevemainard66012 жыл бұрын
In case you were wondering base models don't have a yaw sensor traction control works off the speed sensors rear wheels only and the abs has 4 outboard sensors tucked in behind each brake hence clipping the abs fuses and pulling out the speed sensors everything off but you still need to cut the wire to the ecu to remove the throttle cut otherwise every time you touch the brake it will cut throttle % if you unplug the brake switch it will bypass the function for a while but after the ecu doesn't register the function for a certain amount of time it will throw itself into limp mode until you reconnect the switch. (To much time turning 350's into drift cars :-D ) After playing around give Greg and the boys at GK Tech a call and get all the parts to make it into a serious (even if a little slow) drift car!!!
@shredy7885 Жыл бұрын
Hey Steve I got some questions. I’m trying to get my 05 base trim 350z sideways. I’m seeing snip the abs fuse and the 69 pin wire from the ecu. Do you have to pull the speed sensors from the rear wheels as well? Or is there anything else I’m missing? If you could please get back to me I’m really struggling to find info anywhere
@stevemainard6601 Жыл бұрын
@@shredy7885 No need to remove speed sensors once two smaller fuses out of the large pink triple fuse is cut and fuse is put back in then the wire to pin 69 on ecu is also cut you should be able to do burnouts with your foot lightly on the brake and the traction control and abs as well as ignition cut will all be off. the only thing then to get it to drift is weld the diff or get a LSD almost impossible to drift with an open diff
@antonioarchuleta93652 жыл бұрын
That dude actually asked if he could drift your chaser lmaoooo
@villelipponen9232 жыл бұрын
Yes. Our LHD Z's do have the same center console as the RHD Z's. So the handbrake is at the same point.
@rightcoastfishing1241 Жыл бұрын
Did u make a video on how to make a board to turn on and off the traction control all the way off
@Wildchildinc2 жыл бұрын
Drifted my G as auto with an open for 5 years before I did the swap. The cars handle themselves for the most part! The easier way to turn traction control off on a G/Z is to remove the power cable to the abs module.
@RRspartan242 жыл бұрын
the Hand break stays in the same place for the American Zs.. when the car is a left hand drive.. all you have to do is google images of a left hand drive Z other then that the interior parity much the same
@zenz25902 жыл бұрын
I love waiting for the new videos to come out every day
@ellenchas59632 жыл бұрын
Can u do some more mods on 350
@samurai34462 жыл бұрын
I own a z myself but never slid it in stock form so I’m happy to see what it would have been like 👍
@codyjohnson29912 жыл бұрын
I learned to drift with a 100% stock, automatic g35. Only things I’ve done to it since learning now is coilovers, plenum spacer and exhaust. Only thing I really want to Do now is get a 350z diff and weld it and get an angle kit. I’m only 1200 into the car so if I hit a wall , fix it and keep ripping!
@Dragon10102002 жыл бұрын
its automatic lol
@codyjohnson29912 жыл бұрын
@@Dragon1010200 and I have less than 1700 into it and I can drift better than half the people at the track lmao auto or not for the price, you can’t beat the fun
@Dragon10102002 жыл бұрын
@@codyjohnson2991 lol sure thing. U have way less control in auto its better to get a manual and use money on that so you dont regret it
@OdsyMJ2 жыл бұрын
Robbie Nishida drifts an auto too and he's a beast. Good on you. Ignore the haters and have fun.
@Cookie-yp5qg Жыл бұрын
I can weld the diff on my auto Z?
@hyper85452 жыл бұрын
Yeah the fuse doesn't always work. Collette had that issue. I would hit up Adam or Luke ^^
@spasm2 жыл бұрын
Base model 350z's don't come stock with LSD's. There are various things you can do to fully disable TCS/VDC/ABS you just have to be willing to make the change.
@FRIEDWINGZ172 жыл бұрын
Stoked that the S15 is broken in, and now im also stoked to see you finally skid the Z!
@sebastiangonzales35522 жыл бұрын
Is it just me or Sam looks like Freddie mercury from the queen
@Carnerd1012 жыл бұрын
"Wall tap" lol
@ridhaadelong43692 жыл бұрын
Yeah that was a little more than just a tap 🤣🤣
@radio87612 жыл бұрын
A lot of ebrake action. Anytime you feel like pulling the hydro give it a clutch kick instead. Multiple hand pulls in random spots. Almost like a habit then anything else.
@LazyDaysPlays2 жыл бұрын
Hit a massive wall tap and still didn't spill a drop of coffee NEW ad clip when needed haha 🤣
@secretsquirrel7262 жыл бұрын
That was a full into-the-wall Adam LZ tap.
@jeffdale59062 жыл бұрын
I do believe to disable the vdc you just need to pull the tail lamp fuse. I think that works in the 350 370 g35 and g37.
@nickknee35152 жыл бұрын
The E-brake placement made me realize something. I have an 04 Subaru Impreza that was made in Japan and I always wondered why the hell it was way over to the other side, even if it only a four or five inch difference. The Z's must have the Merican setup for some specific reason hmmmm.
@user-ff6up4zo5m2 жыл бұрын
Sammit: Everything stock Steering wheel?
@jagerblackice9112 жыл бұрын
Love u sam
@matthewmurray78862 жыл бұрын
Keep the bumper of and get a bash bar 🤟
@axelweder43272 жыл бұрын
4:52 ayy let’s get it man in the 240 good 8 fig!
@user-tf4yv6ez6n2 жыл бұрын
You pop the top off that fuse and snip the vdc side and you're good to go.
@braidyn12902 жыл бұрын
I saw the car behind you at 2:50 and bc of the way the boot looked at first i thought it was a supra 🥲 ..... i got exited 🥲
@quitethequinn26062 жыл бұрын
Clip the lead inside your fuse for the ABS delete. 101 ECU pin chop, VDC delete, weld the rear end and then go. Hate to see such a nice Z become a drift car but if you have to then just send it. It was cheap anyway.
@quitethequinn26062 жыл бұрын
Oh you have a base model.. no VDC. Same as mine.
@quitethequinn26062 жыл бұрын
Yes the E-brake stays on the left of the car.
@Gizawar2 жыл бұрын
You can tighten your vlsd to make it feel more like 1.5 way lsd
@typicalscotland20082 жыл бұрын
Get to rudniks new shop for a visit or invite Chris out there. You guys are hilarious together
@RixxNation2 жыл бұрын
I'm sure that will happen in due time. Remember Japan is much more strict on allowing tourists in and out. In the USA it seems as long as they're making money nobody could care less. In Asia they actually care about the people that live there. Example: When I arrived in Korea after Covid started I had to do a test upon entering the country at the airport & they put an app on my phone to track me to make sure I stayed home and quarantined. They even called 3 times a day at different times, if you didn't answer after the 3rd attempt (incase you left your phone at home and went out) they would send the police to your listed address. If you weren't there they'd wait until you came home then take you to a government facility for the remainder of your quarantine. When I arrived in the USA after Covid started I went anywhere I wanted because our government don't care about me or it's citizens. If you remember back when Sam was finally able to go home and he quarantined for 14 days at home. He didn't stay home just because it was the right thing to do, he also stayed because if he left the Japanese government would know and he doesn't want to lose his visa over some dumb shit.
@RixxNation2 жыл бұрын
@M i Α vℓσg gσ тσ му ¢haηηєℓ! I just drift a Dodge Charger R/T with drilled & slotted rotors & Brembo break kit. Don't need an angle kit, I can just do it.
@cooperporter54392 жыл бұрын
the best drifting setup for a stock car is any coilovers, a welded diff, and a inline hydro brake. Its the best setup for the money.
@jeff666p2 жыл бұрын
That wasn’t a wall tap.... that was a wall slam
@venechiaboy2 жыл бұрын
I have a 350z as well and e break is on left hand driver side which is more easier to reach if you have left hand driver sit
@connorjames63072 жыл бұрын
Wire behind the brake pedal needs clipping Luke fink had same problem with his 370
@NissanR33Ztune2 жыл бұрын
welded Diff is about to be a thing on the Z , May will be asking question as to why her car feels broken lol
@Zach-ju5vi2 жыл бұрын
If they have limited slip models he could just put one so its not so hard to drive for May.
@ihorshylo21422 жыл бұрын
Left hand drive has it e-brake the same place as the RHD, making it more comfy for LHD :D
@Rnfjaydee2 жыл бұрын
Pull the abs bosche block under the centre console, weld the diff, and cooling mods and u good and some bolt on rack spacers
@96motodude2 жыл бұрын
I have an 04 350. And to answer your question at 15:00 the E-brake is on that same side for left hand drive. So it’s close to the driver. That’s strange the didn’t move it over to accommodate for right hand drive I didn’t know that
@MrDavis13312 жыл бұрын
There is a sensor underneath the center consul that you can clip the orange wire and add a switch to it so it shuts it off completely
@moisesguerra1782 жыл бұрын
Out here yeah the hand break stays there, it is right by the driver you don't got to reach over,
@RealRaxin2 жыл бұрын
Double exp 😂
@LOKISX2 жыл бұрын
Minami looks like a blast in the rain. Recently sold my 350z because of similar issues, it wasn't the primary and not worth the hassle. In saying that they can be super awesome with a few mods and are alot of fun for smaller tracks. Also didnt really dig how electronic everything was, fly by, vdc, lazy throttle, clutch issues, plastic everything, zero space, lazy diff etc. hahaha. Good luck with the mods on yours, bit of tinkering & it'll be alot better in the future.
@hmm4752 жыл бұрын
Sammit:- hates new cars Sammit tommorow :- buys new car
@wyattsiecker94892 жыл бұрын
In my drift 350z I had to cut a blue and white wire to the ECU and rip fuses and unplug different modules for me to have full control.
@jeffreywong51122 жыл бұрын
Hurts seeing a 350z in stock form drifting.
@toddsupraman76092 жыл бұрын
You need to unhook the wheel speed sensor sam so it disables the stability control you already disabled the traction control but the stability control is still on
@switz102 жыл бұрын
I thought that what the chaser was for lol. Please do not destroy the Z
@Grumpy_Stiltskin2 жыл бұрын
It's what drifters do, they have no mercy.
@JFlowZen2 жыл бұрын
just came from a video of a 350z at driftland uk and it seemed like they did not take out that thing to turn off TC fully, aha. i look forward to those tutorial videos, trying to fight my budget mx5 urge and move to 350z
@toddsupraman76092 жыл бұрын
And yes in the left hand drive car the brake is on the left side
@zahrulnizam74572 жыл бұрын
Cant wait to see what wheelll gonna use on Z !
@Pxlls4202 жыл бұрын
The e brake is on the proper side in the left hand z
@manillamilkm28162 жыл бұрын
the side the hand brake is on depends on the car. for example the nd miata is on the right, but the 350z is on the left. it doesnt change for the rhd models of these though.
@captainfourstar33842 жыл бұрын
On my g35 I disconnected the plug under the center console and the fuse that you pulled you can just pull the plastic cap and just cut the abs wire on the fuse also I believe there is a connector on the abs block you can unplug. Also I have been told you should bypass the clutch damper in driver side fender well usdm
@amirnurrahman5062 жыл бұрын
Can you please do POV drives
@eyadhossam81082 жыл бұрын
please sam do not destroy that z its too clean to be a missile and driving it to the wall please do not destroy it
@Grumpy_Stiltskin2 жыл бұрын
It's what drifters do, they have no mercy.
@banzaiferret22842 жыл бұрын
yeah viscous limited slip differential over heats and then becomes a open diff .on donut media they welded a plate in the spider gears to make it work
@th3Kun2 жыл бұрын
I'm hyped for the project
@mohawk21382 жыл бұрын
THE Z350 DRIFTS LIKE A ROCK!
@DriveSMR2 жыл бұрын
Ya gotta refuckulate the modulator
@sgambless2 жыл бұрын
Hahahah watching the z stock fells so bad i can really feel the struggle
@iGunkillz2 жыл бұрын
Welcome to the VQ family
@artymusoke135218 күн бұрын
which differential does this car have? would an LSD be better? id love to get a 370z drift build but also daily driver (avoiding the welded diff)
@Andy-pi8qp2 жыл бұрын
Depends on the trim. Mine comes with a LSD, locks even in 4th. This looks like open.
@tommygtr35712 жыл бұрын
PLEASE DO NOT DESTROY THIS CAR! I can't watch....
@allecool17 ай бұрын
I always thought that the tcs button took out everything, i have a 2004 DE, but when i drift that i can just ripp it like hell and it's stock. But everytime i spin around the slip light comes on and i can't turn tcs on again, so maybe that's a way to completly turn of eveything haha, just turn it off as regular and spin out xD Edit: I think though that i have the track or gp package, because i have LSD and Brembo brakes.
@alextheking12732 жыл бұрын
I want that video about cutting off abs
@Anthony-jr7pz Жыл бұрын
My Z’s left hand drive and the hand brakes in the same spot
@PedalandTrek2 жыл бұрын
Hand Brake is on the same side for the US version.
@neiltolentino86102 жыл бұрын
do a video on how to turn off abs and traction control completely
@Eraeraerric2 жыл бұрын
hey! I was watching the Ebisu live stream and saw that! Didn't cross my mind to think it was you.
@sterlingsilver80802 жыл бұрын
You should paint it that OG Sunset Orange
@markphillips69982 жыл бұрын
Yoo sammit hit up gk tech, luke fink runs all their arms etc on his z's
@dirkdiggler9056 Жыл бұрын
The e brake is in the same spot lol it's pretty good XD😊
@biggestthreattoyourexistence2 жыл бұрын
A little slippery out there lul
@GoldenJaguar-2 жыл бұрын
can you do drifting on Lexus Is 250 or 300 2008 ?
@danielcornelius40022 жыл бұрын
Loving the content Sam. If you wire a switch into the power or earth of the abs module witch is under the steering column you should be able to slip that ass around with ease
@aaronj76292 жыл бұрын
When does drifting go well 🤣when doesn't it break or damage parts 🤣sammit tellem if ya gonna drift it's best to have deep pockets tellem sammit
@TristanYZY2 жыл бұрын
It drift well
@dubmedallions79672 жыл бұрын
fuck ya not bad sammit bruv , safe driving 😎
@etelking2 жыл бұрын
Oh yeah Z content 😍😍😍
@suicunefox33182 жыл бұрын
For the handbrake thing, most cars I've been in have it in the same spot as your z. My car has it on the left hand side just under the door, which is weird
@timholubowitch9097 Жыл бұрын
From what I've seen if you don't have cruise control it's open diff.. but I have and enthusiast edition so came on 17s but had lsd and no vdc.
@weishen59382 жыл бұрын
Not bad mate
@xDEATHCLINCHx2 жыл бұрын
the LHD 350z ebrake postion is where yours is right now
@stevemainard66012 жыл бұрын
BTW maybe you should catch up with Robbie he seems to have no problem throwing a stock 350z around :-)
@Nukezillla2 жыл бұрын
The e brake is on the same side as yours for left hand drive