SDS Drill bits PBS 7 A2 - www.lidl.sk/p/... Parkside Performance Roraty Hammer Drill PKHAP 20-li C3 www.lidl.sk/p/... Music: KZbin W. A. Mozart, Symphony No.38 in D major - A Far Cry
Пікірлер: 32
@GleanProducts9 ай бұрын
hello , my friend. I would like to inform anyone that is reading the comments, that there is a firmware update for this tool. my advice is to not update it. It will brick the device. 18 attempts have been made to update the tool and all fail. the only thing that manage to do is make the tool unresponsive.
@BrokeLifeEU9 ай бұрын
Yes, indeed I am seeing reports of that. My hands are itching to try it and see what happens 😂. It is also interesting to see if it will be a battery issue or a tool issue in the end.
@GleanProducts9 ай бұрын
@@BrokeLifeEU If you can find a replacement tool in a local lidl store, than try it. But this is what will happen. the update bar will show that all is going well, keeping steady pace and when it is around 100%, there will be a message that connection has been lost. than you will see the bluetooth blue led bliniking on the tool. and as per instructions, you will have to reconnect the battery to the app and try again. the battery will need 5 to -6 attempts to connect with the app and when it does, you will see that the app will read, that there ia no tool connectd to the smart battery. after doing the procedure 2 or 3 more times, you will see that the app does not recognise the tool. it will aknowledge that there is a tool connected but no model will be recognised. you will try again , and one more time, to the end , it will report that connection has been lost. by that time the tool led bluetooth will keep blinking eradically. do it if you can find a replacement and you don't want to wait a replacement from the service center.
@jkd7799Yann7 ай бұрын
@@BrokeLifeEUhow to update the tool ? Through parkside app ?
@piotrcyran67556 ай бұрын
Hello, I've bought this C3 model, but it looks that the drill in SDS handle has some side movements, not spinning centrically. Is it normal for this model or should I make a complaint?
@BrokeLifeEU6 ай бұрын
If the movements are very slight it is fine, but if there is a huge amount of movement I would just ask for another one. I hope I have managed to help you just a little.
@Рашка-у8й8 ай бұрын
It looks like the concrete piece you used was of the mildest grade. Can you try it on M50 or harder certified workpiece? I'd do it myself but I hear the b2 is fragile so I'm saving it for remodeling a bathroom. 😎
@BrokeLifeEU8 ай бұрын
I have a video coming up with this C3 and a 20V brushed version in which the test is mostly in stone. I think that will be interesting for you. In this video the concrete on the left was rather weak, however the piece on the right was tough to do. If I did not pull out the drill bit to decompress they would get suck quite easily even with the 5mm in most cases.
@XA.BAS.9 ай бұрын
i have only the 4 ah battery it enough ?? (or it will byst my b@@lls?) better 2 4 ah or 1 8 ah, 8 ah 70 e 2 4 ah 70 euro.
@BrokeLifeEU9 ай бұрын
4ah is enough, the 8ah will mostly just result in a longer run time for home needs. I have another video in which I use it with the 4Ah against a 12V with the 4ah. That will give you an idea of what it‘s like with the 4ah.
@dadom859 ай бұрын
Nice as always. Thanx
@BrokeLifeEU9 ай бұрын
I am happy you are enjoying the videos!
@typhoontim1259 ай бұрын
Good video. I have the previous version of this drill...it's really good...goes thro concrete like butter
@BrokeLifeEU9 ай бұрын
Thank you! Do you have the B2 or A1 version?
@typhoontim1259 ай бұрын
@@BrokeLifeEU I have the PKHAP 20-Li A1 version. It says Kompernass on the label, Mfg 2019-08. I doesn't have the antivibration in the handle that yours does. I have used it with a 4AH Battery.
@BrokeLifeEU9 ай бұрын
The anti-vibration handle I think does not do a lot unfortunately. @@typhoontim125
@jkd7799Yann9 ай бұрын
Thanks friend. Fantastic. Do you think that it's better than the B2?
@BrokeLifeEU9 ай бұрын
Thank you! Unfortunately I have never tried the B2. I have only tried the C3 from Kompernaß and Grizzly.
@valeriocoelho81389 ай бұрын
@@BrokeLifeEU better version grizzly or kompernass?
@BrokeLifeEU9 ай бұрын
@valeriocoelho8138 In general I would say Kompernaß are always the better Parkside tools.
@jkd7799Yann9 ай бұрын
@@BrokeLifeEU concerning the new impact wrench B4(grizzly), it's quite better quality than the A2(kompernass), more powerful at speed 1 and the esthetic is miles ahead. So it depends
@BrokeLifeEU9 ай бұрын
@jkd2038 It is good to hear that! I can only hope they will deliver better and better tools at great prices!
@boriskajfes20639 ай бұрын
U biti lagan i malen stroj,pogodan za montaze polica,namjestaja,za rupe do nekih cca 14 mm,mozda napraviti koju rupu u cigli i to je to. Za proboje i ozbiljnu upotrebu nije.
@BrokeLifeEU9 ай бұрын
Da točno. Ali ako ga trebate u kući, lijepo ga je imati.
@boriskajfes20639 ай бұрын
@@BrokeLifeEU za tu cijenu svakako. Čak je vrlo praktičan za upotrebu kad si na ljestvama ili u nekom nezgodnom polozaju. Po mojoj procjeni,s obziirom da sam radio sa Makitom,nema vise od 2 J udarac,što je vrlo dobro za ciglu. Ne napravi vecu.
@josiplacic12309 ай бұрын
Kupio prije 2 3 tjedna malo probo i ostavio u kutiji zatrebat ce, inace kao i uvijek odličan video volio bih vidjeti usporedbu c3 i b2 verzije 😅
@BrokeLifeEU9 ай бұрын
Hvala vam! Nažalost, nemam B2 s kojim bih ga usporedio. Ali ne mislim da će biti toliko drugačiji.
@zefautino9 ай бұрын
People, unless you're rich, stay away from parkshit.
@BrokeLifeEU5 ай бұрын
I also have some Ferrex tool videos if you are interested 😅
@zefautino5 ай бұрын
@@BrokeLifeEU No thank you. I was only stupid enough to waste money on parkshit.
@BrokeLifeEU5 ай бұрын
@zefautino Einhell? I am looking in to that.
@zefautino5 ай бұрын
@@BrokeLifeEU So far, so good with Einhell. Can't complain. The day I can, I'll make sure everyone knows.