Drilling The Well - Cable Tool Drilling w/LD Rhino

Tips about cable tool drilling

[@752brickie]

By the looks you were close to a mud ring and without jars you could be in deep kimshee !

[@mizaeleletronicareal]

Mizael eletrônica real paulista pe lingado nucanal valeu irmão muito bom mesmo tamos juntos valeu

[@charleswoodbury3655]

It seems half these videos I watch they don't know how to operate the rigs properly. When you hear an engine laboring you know he doesn't know what he's doing.

[@mattwoody1089]

How much is this rig

[@user-pg7ph7so5i]

واو شي حلو

[@hugoflores1944]

Máquinas para pozos marca lobos

[@gregorypasternack8337]

The volume is too quiet to use. I recommend you re-do the audio over the video

[@sharalynn4399]

You guys are not doing it the right way cabletool drilling should be done you never screw two drill stems together for one thing they will snap off at the joint in hard formations and never use grease on the joints light oil is the best .your dump box needs to be taller to not get mud everywhere come to new mexico and I'll show you how it's done oil well style works the same for water well drilling .

[@LifewaterDrilling]

Would love to learn more of your drilling experience, Shara ~ reach out to [e-mail] if you'd like to connect.

[@tonyhudson8698]

Drum splitting is extremely hard on the rope, get rid of it.. 27 years as a water well driller, steel casing from start, often drilling to 150 Mtrs, 350 foot. Then pull casing back to expose screen.. Flow rates up to 350 gallons per minute.. Never used Bentonite, except to seal off Artesian wells. Often worked on wells with heads of 10 foot, free flowing 150 - 300 gallons per minute.. As other comments use the bailer Drum upright, keeps you dry.. Slack line on Sandrine is bad if extreme, as it can allow trapping of wire , then tension and bending of wire rope.. Different areas , different ways , yes I understand that.. Cheers..

[@752brickie]

I was concerned about that too ?? But everyone needs to learn . I just pray they are safe because you can get killed very fast around a rig ! From the time I can remember my grandfather ,dad and uncles all STRESSED SAFETY !!!