Did a lot of this growing up. Used to tie a string on the cable to see how far we were drilling down. Dressing tools was a lot of fun as well
@752brickie5 жыл бұрын
Gary looks like your formations are not too bad. Post more videos . Love these old rigs!
@gulammuratza94575 жыл бұрын
I'm not English. But I look like
@danaburth67693 жыл бұрын
I worked on a similar one many years ago, around 1959. Owner was Homer Elliott in Rome NY area. Was one of the best jobs I have had.
@ericwilson81447 жыл бұрын
Man I love to see cable rig still kicking ass, no other rig will ever drill a cleaner well or fish out faster!
@markwilliams45252 жыл бұрын
@Kate g they definitely have their place here in FL. I'd like to get me one
@752brickie Жыл бұрын
I was raised on the Derrick floor of my grandfather’s Standard Rig and National Machine. I was too young to let me drill with the Standard Rig but I did get to drill with the National. Iloved that National when you had the right motion that 200’ cracker on top of the tools would hit twice every stroke. Very few are left to know the feel of the temper screw. Those were the best days of my life.
@PersMachinist10 ай бұрын
Thanks for a nice drilling work...
@philippinestransformacommu8877 жыл бұрын
I found one of these rigs in the mountains in the Philippine, but never knew what it is until now. It's been abandoned for many years..
@jamesamani84447 жыл бұрын
nice one . i wish one day to have that machine thanks for the video
@tresguerrasactsa40082 жыл бұрын
Ando perforando en el estado de Querétaro. México
@752brickie3 жыл бұрын
Looks like =you have some pretty good drilling Gary !
@ilyassbouchaf55295 жыл бұрын
Thank you for sharing that
@gulammuratza94575 жыл бұрын
Very very good
@victorriceroni84554 жыл бұрын
This has got to be the strongest feller on the planet, pulling up and down that drill steel with just one hand.😉
@752brickie7 жыл бұрын
Are you still using the old 33??? They were an amazing rig ! There cannot be many left?
@richardhaywood94744 жыл бұрын
Do you allow the governor on the engine to activate while you are drilling? I’ve heard that the best motion is achieved when the engine is allowed the free wheel as the tools go down.
@jeronimosouzadeandrade1430 Жыл бұрын
E não e fácil eu tenho anos nessa área conheço bem
@supervidere74 жыл бұрын
Good living mate, i'm kinda jealous.
@olubadeajanaku81267 жыл бұрын
Does this take SPT and undisturbed samples? what maximum depth can it reach?
@krista77227 жыл бұрын
water well not geotech holmes
@ericwilson81447 жыл бұрын
You could take split spoon I guess
@robmurphy8062 жыл бұрын
You could try split spoon but you'd have your spoon full in one blow lmao
@omaromar-mc9vi5 жыл бұрын
hi thanks for the video. i have same water well which was dug 20 years a go but for same reason i didn't used, i deiced now to used it for my farm. unfortunate, has been covered by same rubbish and stones, i have rent a seminar machine but the problem i face is one of my rig casing is 8 inch which is they didnt have the stem drive to fug so i need your help were i can find a 6 inch casing and stem drive for it, and do i need to dug more as i have been advice to increase it by 20 more netters to get more water. am waiting your replay pls i can provide you with same videos if its help for my request thanks again
@cablerigoperator5 жыл бұрын
Pictures and video would help. Any rig company should be able to help find drill pipe and drill stem. What kind of material are you drilling in.
@theoronaldo52623 жыл бұрын
How do you make bailer New to cable tool drilling , I'm planning to make one ..? Hope you are interested in helping with someone experience
@hickoryridgehomestead9177 Жыл бұрын
Did you ever get a bailer figured out?
@macmac89305 ай бұрын
How deep is max for this rig? in feet rating
@cablerigoperator5 ай бұрын
It’s rated to drill 1,200 ft. I’m sure that would depend on cable diameter and size and weight of drill tools. It has different settings for changing the length of drilling stroke.
@ozzieulloa60886 жыл бұрын
Whats in the bag that he ads. And how far can it go i just had a well dug whith a 36 they used a 13.5 wide stem to drillit ways over 1 ton. Looking for water in my ranch i found im prity good at finding water i even got the depth of each stream by one meter. Im looking to by a machine need ability drill. Min300m by 12 inch. Any advice.
@cablerigoperator6 жыл бұрын
osbaldo j. ulloa jimenez the bag containes bentonite chips. I use it to make a thin clay slurry to help bailing out my drillings. This rig was designed to drill 1200 feet, depending on the size of the drill tools. I have 600 ft on this rig.
@cablerigoperator6 жыл бұрын
osbaldo j. ulloa jimenez check with other drillers in your area. The geology in your area might be better handeled by a rotary or down the hole air rotary.
@JimJones-lc1kv6 жыл бұрын
get a big ol spudder. 60 l at least. 36 probly keep ya out of trouble though. also depending on formations and your longstring steel or plastic ?
@kaledkala17485 жыл бұрын
شيأ حلو 🤗🙄
@josephherrmann6304 Жыл бұрын
Too much slack.
@garyhoyer25864 жыл бұрын
Richard, the engine is only working to pick up the drill stem. After the spudding arm starts to drop the drill gravity takes over and the engine is coasting. You want an engine speed that lets that happen.