Driving Peterbilt 352 Cabover

[@gj5250]

Man that CO sounds so sweet, you remind me of my granddad he was a hard working SOB. Keep up the great videos mate love your channel.

[@alhoppe7952]

My brother had a '69 Pontiac Firebird convertible with a 400 ci "Armstrong steering" what a handful.

[@rabahyacobi5232]

Heyyy man!!! You made me love this job.

[@docmcneedy5471]

I can't see enough of that beauty!!!!! Love her!!!!!!

[@novmad67]

I totally love that truck, someday....

[@ronaldmicheau5086]

Sweet hello from Michigans up

[@xabisontombela6715]

You're one hard working dude, owning a shop and also trucking. 💪🔥

[@fsctrucking]

Time or money, can't have em both. I heard that on a song by Akon once...

[@MichealSinclair-sp5iz]

Do jen smoke

[@treygiles917]

Wow just found this video very nice ol rigs sir...

[@clarenceswope4915]

I like your square body bourbon sitting in there even though it is a 2X wish it was a four by with correct 6.2 l diesel not a lot of people like the diesel but I like

[@donh8973]

Can't wait to see more

[@omegatafkal]

Cabover Pete with a reefer on :)

[@paulbrown6554]

That 352 sounds sooo good imagine what she’d sound like with a heavy load on the Back 👌🏽

[@jwelshdesign]

I give it a thumbs up for the F'n Shine Box!

[@johnpryor7989]

Some thing about saving a old truck is great I learn on an old cabover like that one it had no power steering, no cruise control, no power mirrors. No air conditioning, no power windows. No automatic transmission and if you were lucky you had a AM radio most of the truck drivers out there today could not drive one like that I'm 64 years old I learned how to drive when I was 18 and I will always have a soft spot in my heart for a good looking cabover

[@ronfullerton3162]

And that am radio had a cardboard speaker cone that wasn't very clear to listen to even before it started cracking. Those old trucks were still neat, even if not as good at creature comfort.

[@jasonjimenez1138]

Great channel. You bring me right back to my early years where my Dad had a shop and a few trucks, mostly Fords and Internationals. It was a great way to grow up. I was the only kid on my block that knew how to break down and mount an 11R 24.5 or where to spray the ether on those cold mornings.

[@bigryanm7083]

these kind of cabover trucks are shipped to my homeland philippines, they are really old but a great truck to learn on and to get paycheque from..

[@zachwisler9976]

You have some SWEET toys. Hard work pays off for sure. That 352 is beautiful.

[@jbdiecast3809]

She's a cool old truck love the paint job

[@williamengland6119]

Love the old rigs. Woundful sounding machines. Thanks for sharing. Happy thanksgiving! William

[@bobsmithsonrealtor]

Brings back bad memories. Before anyone had power steering, then came air assist and center point steering. Good job!!!!!

[@ronfullerton3162]

We always called it Armstrong power steering.

[@whotf888]

I know we're here for 'em trucks, but daamn, these Mercs look sharp even after like 7 years. Congratulations on all the things you've worked for, sir.

[@bryanphillips6666]

Hi Steve I just wanted to let you know that I have been telling truckers about your channels, and I am seriously enjoying watching them

[@plumbingstuffinoregon2471]

Man that's pretty much my dream truck. I seriously wouldn't mind going OTR in a truck like that. It's just too cool!

[@yepperbgolley8215]

Thanks for all the great videos about Orwell and everything. The guy with KZbin channel "KT3406E" he seems knowledgeable about the 3406 and all the variations. He has sources for parts. I don't actually know him, I just watch his videos.

[@lornperkins4270]

F.s.c thanks for letting us hear it crank up..a lot of other truckers who have channels skip the start up phase and that pisses me off..I wanna hear that sweet starter kick over and see thoes pipes roll that coal.ans listen to the horns and jake brake..thats what I want

[@renesolorzano5019]

Hello my friend FSC Speed Shop I congratulate you for the videos they are excellent and illustrative I do not know English but I understand what you are saying I see that you like Peterbilt ñatos a lot a hug from a distance greets you René from Ecuador

[@edwardmorgan9411]

Can’t get enough of those trucks, awesome video!

[@voltmandk.h.sherman777]

Thanks for the drive and thanks for the ride!

[@bobwilliams3502]

Also I bought a brand new '79 cabover 362 out of Little falls New Jersey which that dealership is long been gone but they might have been when they were transitioning from 352 to 362 I don't know for sure mine had a 400 Cummins in it though and a 15-speed trans it had a hell of a Sharp paint job to it

[@Chevy4x4dawg]

Was that Chicapee (sp)? What was the paint scheme?

[@bobwilliams3502]

@@Chevy4x4dawg it was Green gold and I if I can remember a black stripe. I've only seen one of the truck paint ed with that paint scheme and it was a conventional Pete

[@scottklaske7753]

Found your channel and like the content. Really peaked my interest that you are from jersey and your wife from Philly. My wife and I live in Oxford pa. But are originally from Fond du lac, wi. Keep up the good work.

[@robertferguson6433]

I SEE MEMORIES THERE WITH THOSE OLD DAYTON WHEELS, IVE DRIVEN A FEW PETE CAB-OVERS AND IVE OWNED 3 PETE CONVENTIONALS. I LOVE YOUR CHANNEL AND WATCH A LOT, SO OFTEN I SHOULD FILL OUT MY OLD LOG BOOK. ONE CHARLIE-HORSE ON THE SIDE.

[@markpaulene4002]

Hi your trucks are massive or should I say the sleepers are compared to ours over here in the UK, your sleepers are like mobile homes but nice I love the cabovers, each to there own, bet you don't have to say move over love give me some bed, not in your kingsize bed. Hay only kidding I was a trucker but now retired due to an accident at work and now unable too work but do love trucks, keep shiny side up and love looking round and the sound. Thanks markuk

[@fsctrucking]

The one in my blue truck actually is close to what they call Full here in the states. I've seen pictures of European trucks. They sure are different than here. I'd love to see them first hand one day.

[@goratgo1970]

Thx for tour and the ride in the classic with class

[@MrRJBooth]

Great vlog and gotta add what a wonderful sound that truck makes . Hog is a great machine , wing mmmm . Cruiser I guess but getting rare

[@OldIronRC]

Sweet old trucks. You'll get a heap of views on this. Old cabovers have quite a fan base on KZbin. Will be watching out for the '79 repair videos.

[@rjhtrucking5429]

I might be buying a 1975 352. It has a Cummins small cam 350 . No powrr steering, no front brakes but does have Jake's. Hopefully i can meet up with him soon to look it over. Great vid, thatnks

[@GTSTWINCAM16]

My new favorite channel

[@kman-mi7su]

I love that old Goldwing!!! I want one.

[@fsctrucking]

The new ones have less room for luggage, but look bad ass! I still love the older ones. Fun bike. Both my bikes have compete different personalities and attitude.

[@kman-mi7su]

@@fsctrucking Yes, I agree. I like the older ones for that fact. I'm going to need the space I plan to throw my girlfriend on the back and ride thru Shenandoah National Park in the Blue Ridge Mountains. I imagine us spending part of the day enjoying the beauty of the area, then going for dinner and drinks and checking into a hotel, so I need the luggage space. I'm getting close to retirement from my job so I'll have time for some 3 or 4 day weekend rides. Keep up the great videos!

[@kyles280]

I have that same goldwing. It’s a nice bike. I’m just a little south of here in WI too

[@MM-cz9fq]

Damn them bikes are dirty! Now go home and get your F@CKEN SHINEBOX! “Make ‘em look like f@cken MIRRORS BABY!” -Billy Batts.

[@kevinrichards3288]

Cabovers rock 🚛😎👍

[@shreddder999]

1:03 Jakes aren't on, are they? 352 I'm guessing the cab is not air ride yet.

[@seansclassoictrucks]

no such thing as a D Cat, but love both of your COE's! my 1972 Peterbilt 352 has its original 1693, and for the Jakes? you can try G and O truck parts in Jackson, CA but they arent the easiest people to deal with

[@ruxoneto6560]

On early 3406 a the fire ring was thin and would flex with a jake brake & break , most of the old rings are gone.

[@davidkennedy7153]

Cool Truck , as I said in my comment on the last video , LUV the C.O.Es , my favorite are those THREE FIVE TWOs !!!!

[@roadtrain5910]

cant wait for the 352 is ready for the road

[@moneyman1588]

That's cool never knew you owned 2 peterbilt cab overs

[@bobwilliams3502]

When you first started it up I could have sworn it was a 1693 cat also that paint job looks like an old international transport truck that of Houston Texas

[@chadsmith961]

That’s because it’s a 3406A “precup”. Got that clatter 👍

[@ronald6138]

It was out of Rochester Mn i was leased to them 1979 to 1984 .

[@lornperkins4270]

My daddy had a 80 international transtar. *cornbinder* with armstrong steering and rubber block suspension i was really small but I remember

[@michaeldunagan7838]

I ran in to an old school trucker a couple years ago at a dock. I asked him about "the good ole days" which he mention driving trucks with no power steering. He told me the truck was "you gave to bounce it", which I took it to mean herky-jerky it to take weight off the steer tires so the steering wheel could be turned even if only intermittently.

[@kevineich5029]

The Bravo 3 is the one with dual counter-rotating props. The visual difference in the Bravo 1 and Bravo 2 is the lower half. The Bravo 1 has a swept back skeg below the prop shaft and the Bravo 2 is not swept back. If oil is leaking out, water is getting into the drive. You mentioned the drive makes a noise - it could be the gimble bearing which is a relatively easy fix.

[@fsctrucking]

The engine will be coming out. I intend on replacing the drive and the gimbal bearing. In fact I just got in the removal/instalation toon and alignment tool.

[@soulshakerman]

Bro! Love your truckin vids, your shots, views, sound, music and the 352/362 content makes a truck fan like me a consistant subscriber. Keep the Cabover stuff coming!

[@lawrencepervier77]

I shared this video with a few Facebook groups. Looks like a few more views for you.

[@fsctrucking]

Thanks much.

[@noddydean9395]

Look out for twin sticks garge he's finding loads of cab over bits plus he doing two old trucks up and he's like you a great guy

[@whoveniledelinquent]

Almost sounds as good as my cummins 400 big cam in my '85 cab over kenny. Naaah, good video, thanks from down under.

[@robertferguson6433]

ARM-STRONG STEERING. I REMEMBER THOSE DAYS.

[@marknewell7355]

She sounds good the old girl love it brother

[@the.porter.productions]

Well, the 352 looks pretty nice, even with the frame being so rough. Tis a shame that the rails got into that condition, but it happens. That truck IS worth saving...and it has a Cat engine ...SWEET! A cabover with a Cat! 🤩 I don’t know what the wheelbase is, but I think it’s long enough in my opinion. Is it getting new rails or just a slice N repair? The new owner is really gonna work it? Sweet! 🤩 Doing the repairs on this rig will really get attention! Trust me! 🧐 Cabovers rule! 🥰

[@jessesager9460]

That A model sounds mint!! 👌🏻👌🏻

[@fsctrucking]

That thing sounds cooler than Orwell with the "B"....😒

[@Cairnsxr8]

Love your videos man

[@djstoffe5553]

You can name the Peterbilt 352 Orwell Junior :) That is a nice pice of trucks you have, like them both.

[@rattmann36863]

I think the cab over should be brought back, especially around big cities. I've seen some vids of full size conventional trucks trying to make their way around some of those tight spots in big cities.

[@tommyhall350]

Love that pete cab over

[@philheese1728]

The F__kin shine box!? I should get one!

[@lannyhammett119]

I hated the first truck i drove with power steering. Thought it was way to sensitive,& soft I guess. But it made backing a breeze.

[@ronfullerton3162]

I thought the same until I got older. Then that power steering got to be rather sweet!

[@tommyjones2443]

you have to rock the wheels with the clutch while you turn the steering wheel

[@robertcowan8211]

SOUNDS LIKE A CLATTERING EARLY 3406 CAT

[@annyer262]

Now I know why the steering idler box in my 1966 Rover is called "the Armstrong steering Idler damper!"

[@keepontruckinoutlawlife1248]

Same thing with my motorcycle thought they would pick me off as well. Now I try not to miss one day of riding.

[@fsctrucking]

I had friends hassled in their cars coming from their work. funny only a month later Police allowed full blown Rioting. But hassled you for riding a motorcycle or going to work. We were actually issued "essential travel papers" to show trucking was our job and that we were deemed essential. I have a good friend who grew up in Romania and old enough to remember the Soviets. This reminded him of that time in his life.

[@keepontruckinoutlawlife1248]

@@fsctrucking yes sir I'm 42 years old like I said in the previous comment that I own my own rig as well as a washout/ detail shop for semis only I do clean some street bikes though as well my business is located in Detroit the good part of Detroit which there really is no good part in Detroit I'm just in a better place in Detroit. There still not deming us as essential worker's so needless to say I've been fined 500 dollars once for detailing a sweet cabover. So I've been shut down since this plan demic started really need to be open again soon before I loose everything I've ever worked for for 42 years ahhhh as soon as this governor reopens us I want to get your cabover in I will make heads turn everywhere you go free of charge because I know you're a good hard working man and I appreciate everything that you do. Thanks for replying means lots

[@ronfullerton3162]

@@fsctrucking I am retired, and was out on my Harley riding all summer of '20. Guess I am lucky, but was never stopped. I do love the older Wings! They were a sweet bike.

[@kyles280]

I have the same Goldwing. It’s a nice bike

[@charleshoward2685]

Does Yellow Bell have a Detroit. ? It's to quit to have a Cat or Cummins.

[@fsctrucking]

Cat 3406A

[@raywilson800]

I've made a dreadful mistake here. I would have bet a dollar to donut that 352 had a Cummins. It sure sounded like an old NTC Big Cam. First mistake I made today, but it's early. I ment to mention in my last comments. Great kid you have there out helping with the work👍😎🇺🇸

[@fsctrucking]

HAHA, Its all good brother! Soon I'l have the cab tilted and we'll be under there.

[@okiedoke6373]

I don't know what engine you have but to me it's like the timing is off the injection pump

[@fsctrucking]

The 352 has a 3406A

[@terrymidkap9840]

You find any jakes?

[@Ismael-iw4tm]

Nice trucks 👏🏾😎🇺🇸👏🏾

[@nyx7255]

Anything being done with the 'burban at the back? Maybe a bit of a revival to it would be dope.

[@darinpeirce4094]

What is the story on the suburban behind your bikes?

[@fsctrucking]

Was my Father's brand new in '89. One day I hope to restore.

[@deanbacon8245]

The one looks like it has International Transport colors

[@SchnelleKat]

A model Cat? Almost made me think it was a Cummins. Oh boy... haha. Back when you actually had to Work to turn that wheel! That's a Real job.

[@n2uid01]

Name the boat Shaka Too!

[@fsctrucking]

no

[@crushingvanessa3277]

Nice rig, hope your plan is to keep it intact.

[@nickkirkland9118]

Do you still have the 352

[@tongli7091]

no smoke no fun

[@dieselwrench3621]

You should get the 352 road worthy and take it out on a haul once in a while 👍

[@bobbysprinkle6086]

What model is that Blue Chevy truck at your shop I got a 1973 Chevy C10 with a 307 with a police interceptor in my truck my runs I needs to come up with the money to get it back on the road

[@fsctrucking]

It's 80 something. It's a friend of mine's truck.

[@randyowens2717]

Love the Cat, but hate manual steering!

[@emmezetatim2676]

That is beast

[@norcalray7182]

Cool trucks. What's with the big red subscribe box that keeps popping up on the screen? Man that big 🐈 sounds good.

[@fsctrucking]

Only 10% of viewers are subscribed. Gentle reminder to do so.

[@andrescuriel4512]

3406a non charge air cooled f The 3406b has carge air cooler and make more power than a model

[@bobbythedreamer4513]

I have a jake brake for a 3406c 400 a 92 model don’t know if they’ll work

[@bobbythedreamer4513]

My 3406c is full mechanical

[@fsctrucking]

[e-mail]

[@Chevy4x4dawg]

Do you know the history on the 352? Paint looks like a ITT truck.

[@nashwaldrop6198]

3406 c was the b model with an electronic conversion on the back of the fuel pump

[@ruxoneto6560]

No you both are wrong the 3406 b came with both, after cooler& later with ata & 3406 b came mechanical fuel pump & electronic control called, p.e.e .c. (programmable electronic engine control.

[@niceguygesnone1]

Make it into a pick up or flatbed

[@millionmiler]

Nice shop but Westin Chaplin put 1st gen Cummins into his mustang

[@SOU6900]

Can I have that square body Chevy? Also something to consider is that supposedly, from what I read somewhere on the net, the 3406A jakes will stall the engine if you're idling with them armed. Now whether or not it's true I have no clue on as I've never had need really to research it.

[@fsctrucking]

My B will damn near stall it at idle.

[@SOU6900]

@@fsctrucking About putting jakes on the 3406A, have you gotten ahold of a Cat dealer to see what they would run?

[@mattselby9889]

The 3406C is full mechanical engine, the just have bigger bearings than the B model. We have a 3406C and it's a HORSE!

[@mikeschumann7832]

You're splitting gears in the parking lot why

[@tandem8]

You should name your boat 'DON'T DO THIS AT HOME"

[@tonypickrell4281]

Name the boat. " The JEN-LEAH ".....!!!

[@taganrog5314]

Что то я не понял ты его покупаешь? Зачем по кругу ездил?

[@rags-fv6ko]

Do that truck came from factory with a window in back

[@jessewessinger1093]

rags 1977 yep💯