Dry Gas Seal System Centrifugal Compressor

This video is about Dry Gas Seal System in Centrifugal Compressor
Before understanding dry gas sealing system , we should understand primary and secondary sealing arrangement.
So if you see sealing arrangement in compressor, you will find primary and secondary sealing stages are arranged in series.
First in board seal : The one on the compressor side is known as primary seal.
Out board seal: The one on the bearing side is known as secondary seal.
During normal operation the primary seal unit seal against full operating pressure. While secondary seal acts as a backup incase of inboard seal failure ( i.e. primary seal failure), secondary seal prevents gas leakage to atmosphere.
Barrier seal is provided between secondary seal and compressor bearings to prevent entry of lube oil into seal zone.

[@sarveshsingh9099]

Bahut shandar and crystal clear explanation alok bhai

[@alchemyacademy_]

Thankyou Sarvesh Bhai 🤗

[@md.mosharrafhossain1784]

Thanks for explaining the dry gas seal system in details. I liked it.

[@akar1875]

Well explained sir, really appreciate.Thanks lot.

[@panjamurthyrajamanickam1000]

Thank you very much for the Excellent and knowledgeable lesson.

[@ahsankhan9770]

Very good explanation and informative video thank you

[@mohammadadil7763]

Excellent, much appreciated.

[@Farooq73478]

It is good video for beginners but needs some correction. In normal operation, Process gas will never cross process labyrinth seal and can’t leak through primary seal vent. In fact it is primary seal supply which flows through process labyrinth seal (80%) and remaining 20% leaks through primer seal vent which is mandatory for DGS healthy operation.

[@bhargavar8930]

Very useful information 👍, thankyou for taking your time to make a video on this.

[@maheshnevase9650]

Very nice video Thanks for video Do more videos

[@alchemyacademy_]

Most welcome 🙏

[@kunaldeep2914]

Really very informative and useful,please explain oil film seal and contact seal also

[@bhavendrajha6460]

Thank you so much, you have explained so well

[@gauravpashine7498]

Nice explanation bro, best explanation for understanding about this topic on you tube, keep posting such valuable information video.

[@MyShaikali]

Really very informative, thank you.

[@karanmehta4148]

Plz also add some practical video or image so we can understand more, but video is very useful for me. Thank you

[@denishpatel1461]

Very good explanation

[@TheSaigal123]

Good explanation. Keep it up.

[@vishalchhayani4110]

Excellent explanation.keep it up bro 👍

[@RRR3512PYQ]

Bahut badiya sirji

[@sankaravinayakaattada9863]

Good job Brother keep upload like valuable vedios 👌👌

[@hariomrathour3104]

In normal running condition compressor discharge is very high and nitrogen pressure will be low , then there will not be any forward flow. Hence Primary seal injection is taken from compressor discharge . Pls comment by maintaining pressure 0.5 kg/cm2 higher than balancing line . Pls comment .

[@maheshnevase9650]

Execellent video

[@thomasmathew4469]

How about booster gas compressor? Which loop would hav the booster gas compr installed.

[@mohd.faisalbagban8242]

Excellent video must watch does want to know about seal gas system in the compressor, One question, we also used a rotating seal on which grooves are provided please provide some explanation on that also.

[@harishankartripathi5144]

Thanks Dear

[@riteshkadam5258]

Thnk u very much Sir

[@jamankalathiya216]

Suction and dicharge side pressure different hoga to seal balance line kaise balance kar payega..

[@user-bh5wv4xm9w]

Compressor Auxiliary Shutdown .. what main?

[@creativeRam2016]

Nice

[@kanaravijay593]

Excellent

[@dilipkushwaha7825]

The great ... Excellent

[@niranjangt1087]

Please make some videos on expander compressor

[@gauravpashine7498]

What will happen if lube oil goes in lybarneth seal system? What will actually happen?

[@user-bq8hh5lb9b]

We have centrifugal compressors, but the type of seal used is the oil seal. Is it possible to make a modification to it and convert it into a dry gas seal?

[@radheshyambisen9958]

Please explain about seal balancing line

[@guruprasadshukla3408]

Compressor ko start karne ke phle kin kin bato ka dhyan dena chahiye ...and primary secondary and dry seal system detail process ...

[@nitinhanda82]

Where does nitrogen flow from secondary seal gas get discharged in normal running condition

[@karanmehta4148]

Plz prepare one animation video

[@abderrahimbouhassoun5974]

Witch plan api is it this mechanical seal

[@tansingh4524]

Secondary ka vent nhi hota, secondary puri primary vent me jati he.

[@ramchandraraj9956]

Sir, where secondary seal vent atmosphere/flare

[@technicalirfan436]

Good

[@chemicalengineer1985]

Sir balancing line ke sath wala videos share kare .

[@silentman7546]

Dry gas seal parts ur assembly per achi video bnyiaa sir

[@ajaysinghbisht5523]

Wow sir

[@chemicalengineer1985]

Steam turbine Compressor ka ho sake to detail me batay sir.