Dryer Repair- Replacing the Thermal Fuse (Whirlpool Part# 3392519)

www.partselect.... Click here for more information on this part, installation instructions and more.
This particular Thermal Fuse is specific to Whirlpool manufactured brands including Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Glenwood, and Caloric. To find a Thermal Fuse specific to your model, visit www.PartSelect.com
If your dryer is having any of these symptoms, then replacing the Thermal Fuse could solve your appliance problem.
1) Dryer will not turn on
2) No heat in dryer while it's running
3) Dryer takes way too long to dry clothes
PartSelect Part Number: PS345113
Whirlpool OEM Part Number: 3392519
Tools used for this repair/replacement:
1) 1/4" Nut Driver
2) Pair of Needle Nose Pliers
Get model-specific repair help from PartSelect.com. Learn how to troubleshoot, diagnose and repair your appliance with user-generated installation instructions, hundreds of step-by-step repair videos, and our Instant Repairman. If you've got an appliance problem, we can help www.partselect....

[@tanyadegurechaff6798]

Im ashamed to admit I let me dryer be broken for so much longer than necessary. It was not heating nor shutting off. Only tumbling forever. I didn't realize how easy it would be to fix by myself. I didn't want to shell out hundreds for a handyman so I did a little bit of research. It was surprisingly easy information to find and this video was excellent and solved my exact problem. It took me more time moving my dryer out than it did replacing the part. Im happy to report my dryer heats and turns off by itself now. Thank you very much, I think I'll try DIY methods more often now. You gave me some confidence!

[@L2PlayRunescape]

Same i put it off for so long that i was hanging my clothes to dry in my house with a fan... did that for months... finally got around to this

[@kristenwittman]

Thank you so very much for making an easy to follow video. Thanks to you I was able to repair my dryer for under $20. You saved me from having to buy a new dryer!

[@blackrifle6736]

*Steve: Thank you for another superb presentation towards renewing my LGR7646. It's decades older than one shown but the guts are all the same since 1966. Cheers!*

[@henrythe8th155]

Thanks for your video! I was able to get my dryer going again for the cost of a $10.95 fuse!

[@sauronthegreat5799]

Another thing we should do while replacing the thermal fuse is to clean the vents. Blockages in the vent will increase the temperature and burn out the fuse again. It’s always good practice to clean out the vents.

[@barbarac3971]

I am truly so grateful for you making this video!!! My dryer has been broken since November 8, 2023. It just up and quit working after I had just spent time, and money, fixing my washer. So I just started hanging clothes on the line while I save money for what I'm assuming would be an electrical issue...since it wouldn't even power on. I even contemplated replacing my 8 year old set. THEN, I came across your video a few weeks ago and sent it to my son. I have recently had neck surgery so I definitely couldn't do any of the work. Cut to yesterday, January 20, 2024 when my son bought a multimeter and checked the fuse. He found one on Amazon for a mere $2. He ended up buying a 3 pack for $5. Package arrived today. For over 2 months I've been stressing over a part that took 2 minutes and $2 to replace!?

[@dugutigi_4176]

Fantastic video! This was so easy. My dryer stopped working and all the internet articles seemed to suggest it was either the thermal fuse or the door switch. I tried the thermal fuse first and the dryer works again. Once I had the part I was done in 20 minutes. Thank you so much!

[@partselect]

Dugutigi _ Great to hear! Now it's time to get caught up on all that laundry!

[@bengus8148]

Thanks! Even on a much older Whirlpool dryer the layout is exactly the same. I bought this part for about $10 shipped and it took maybe 20 minutes to do the job. I spend another 20 mins doing a through lint clean up with a brush and my shop vac. Last time I paid to have this fuse replaced it was at least $125.00+ and that was 7-8 years ago. Thanks again!

[@katieellenburg3394]

I want to thank you for taking the time to do this video. I found, and got, the fuse out with ease (mine came out easier than the one in the video). Then replaced it in a jiffy, and am the proud owner of a working dryer again after a year. Again, thank you for doing this video and video series.

[@partselect]

You're very welcome! Happy to hear that you're dryer is working again!

[@EliasArismendez]

Repair estimate was $160. Cost of part was $11. I watched this video and saved some money. Thank you!

[@frankdenardo8684]

Elias Arismendez this video is a big help

[@danielcarroll503]

GREAT VIDEO, My dryer is exactly the same on the back. Tested fuse with my multimeter and it was open. Hard part was getting the fuse! Had to order it on-line as could not find one in any local store (including Lowes, Home Depot, ACE, and Sears appliance store). Did a thorough vacuum and cleanup with the cover off and the hose disconnected. Replace fuse, replace cover, VOILA all working fine again. THANK YOU.

[@christophercarlson3641]

Hi, I just wanted to say thanks for the video. I watched it and learned how to do this repair. Very happy from an unhandy type guy. Easy and cost me only $6. Thanks.

[@charlinstephanie]

Thank you so much!!! I fixed my dryer all by myself with your video and a replacement kit from Amazon. It cost me 50$ instead of a new dryer or the cost of someone else to repare it.

[@danschultes7107]

thanks Steve. I just changed my thermal fuse (I purchased a 3 pack through Amazon) and my dryer now works again!

[@capp11295]

Thank You Part Select where do we send the check!!! for saving us over 100 dollars because that's what the repairman wanted or maybe we might have given in and bought a new dryer for over 500 hundred dollars without installation and delivery So for the cost of 2.50$ for a part from amazon and then watch this video we did it ourselves, Thank You so much because we just fixed our own dryer and we never fix anything without breaking it even more. Thank You Chris.P from South Philadelphia

[@dawncolon4878]

Thank you for this video. Everything went exactly as shown in the video, and a part that cost less than $10 saved me from buying a new dryer. Keep up the great work!

[@fostib3467]

My dryer turns but no heat. do you think it would be the heating element or the thermal thing shown here? I am about to literally panic. thanks please reply if you have time.Desperate mom w laundry piled up

[@dawncolon4878]

@@fostib3467 HI, I doubt it because this is just a fuse but cannot say as I was in the same boat as you - a desperate Mom with laundry piling up lol. Email PartSelect, they have the pros to assist. Good luck!

[@fostib3467]

Thank you. Yes your correct it was not it was the element. We took it off and some of the coils were broke. 60 dollar part fixed it. Thank you for your pleasant response. (btw the laundry is caught up now) lol. I was worried we would have to dry off with a hair dryer after baths !

[@tking3464]

Thank you for the helpful video. My dryer is gas and had to remove the gas line in order to remove the back cover. Dryer was covered in lint. Good time to vacuum and clean the dryer area;)

[@genew2140]

Thanks for posting this video. Changed the thermal fuse and everything is working again.

[@dano8051]

Thank you for the video, I tested the fuse & it was bad, I cleaned out the dryer of dust bunnies, replaced the fuse, I got the part from a appliance repair shop, saved me a $100 service call. Fuse was $15.

[@Paigerbaby1976]

I believe this is what is wrong with my dryer. Thank you for the video tutorial.

[@lawofficeofrebeccaperkins7716]

Thank you for this video. I was able to fix my own dryer for $5.47. Ordered the part from Amazon

[@DSNCB919]

@@sunnydays4966 your house burn down yet?

[@6406pas]

I HAVING A PROBLEM WITH MY DRYER IT COMING ON EVERYTHING BUT IT NOT PUSHING ANY HEAT ,COULD IT BE THE THERMAL FUSE OR THE HEATING ELEMENT NEED CHANGING WHAT TESTING COULD I DO ON BOTH PARTS,AND WHAT READING DO I HAVE TO LOOK FOR .....

[@davo7045]

I just changed my fuse on a whirlpool dryer( wasn’t the switch or the door sensor) but as soon as I tested it the dryer smells like burnt hair/popcorn... really bad. So I unplugged it. Is my dryer dead?

[@johnzirkle606]

This is awesome! Saved me a few hundo and having to replace my brand new dryer.

[@mr.t.3689]

Thank you very much for showing how to replace the 'thermal fuse'. . I saved me some $$$$$,

[@tonyrod41]

Thank you for this Great, short, sweet, and to-the-point video. You have saved me time and $$$.

[@denisenorris7435]

Thank you for posting this excellent video - I like the trick about holding the lid open. It was easy even for a rookie like me...AND IT WORKED! (just a fuse in my case)

[@m.m.1261]

Thank you for this video, was able to replace and get my dryer back up and running.

[@raymondbennett]

Great video. I would have mentioned when removing the terminals from the fuse, to mark them so you know their location when reconnecting.

[@tomb8381]

In this case it makes no difference ...

[@petersoncap]

It’s just an open/closed switch, wire/terminal locations don’t matter.

[@Master_Redi]

Thx for the vid, saved me lotta cashola, easy $5 fix, took 20mins.

[@iridius]

This is an excellent video with great safety alerts. I have a question, if I can. Does it matter which terminal is attached to which part of the thermal fuse?

[@f.joebidencommunistpartyof4156]

Yes, if you get it backwards your house will explode. But if you get it correct nothing to worry about. So give it a try.

[@samarawilkerson-bell9920]

This video really helped me to switch out the fuse on my dryer! Thank you so much!

[@jeffgraham9089]

Thank you so much. Could not have done this without you.

[@wowurlamee]

How do you know which wire terminal is which can you blow the fuse by mixing them up?

[@cra2cra226]

Should be the top question

[@CarmelaMartino]

Thanks, I received your message and have replied with more details. I appreciate your help.

[@muhammadrizvi5691]

when i try to start my whirlpool gas dryer, it does not tumble.. i just get a humming sound.. the belt is not broken.. would thay be caused by a thermal fuse?

[@avishaybogler8106]

The motor on this model stop working after 10 min. I tried to look for the capacitor “under the hood” but I didn’t find it. Ideas?

[@bklaw1234]

Thank you. What's the trick to removing the wire and clamps from the thermal fuse? You did it easily with just your forefingers. Mine won't budge. Thanks

[@partselect]

You're very welcome! Happy to hear that.

[@W4DSolutions]

I think you just saved me hundreds of $$. Thank you for this.

[@israelpena8163]

Does it matter which color goes on which terminal? I took it off but didn't pay attention which one went where. Thanks

[@partselect]

The thermal fuse normally has the same colored wires on both terminals, and they are reversible.

[@israelpena8163]

Thank you for posting these videos. I used this video as well as the video showing us how to replace the heating element on my home dryer. Back up and running. Thank you.

[@initiald911]

Thank for the video. Do I need to make sure the two wire are plugged back into the correct spot?

[@xandernicol3980]

I need your help by troubleshooting my mom’s dryer it’s a whirlpool dryer American made it is not hitting that well can you help me troubleshoot that dryer please thank you so much

[@susanmassaro3805]

Thank you so much! This was super easy and saved me a ton of money. Your video was well done!

[@hotmoffitt]

Thanks man! I'm going to try this on mine right now because my wife did about ten loads without cleaning out the lent catcher...

[@heatherm.8830]

Dryer turns on and spins fine. I notice it’s been taking longer and longer to dry stuff and went to check and my towels aren’t dry at all. It’s not heating up. Would it be this thermal problem or the thing by the heating coils?

[@jasonzimmerman1500]

I replaced the thermal fuse after my dryer did not start. My dryer started after I replaced the fuse, and I thought all was well. I ran a load of laundry and now the dryer will not start for the second load. Did I get bad fuse or is there another problem.

[@Ryuu882]

My thermal fuse doesn't disconnect so easily! Wow! I'm actually triggered by this video because of that. So how can I unplug my fuse? Can I try forcing it without fear of breaking anything? Is there a tool I can use? It's connected so tight.

[@jinov191]

thanks for posting, I was able to repair my dryer with just a fuse

[@sonnylombardozzi2633]

I forgot witch wire goes were on fuse dry seems to work either way . how do u double check

[@janc.1643]

Thank you for this video, changing the thermal fuse worked for us!!

[@christinakeener8931]

Thank you so much!!! Your video was perfect for me to follow with the 1st time I have ever repaired an appliance. Happy to say I have heat again :)

[@amberlygoff]

Exactly what I needed to see thank you!

[@pennyauger4227]

Is it possible to put the wire thermal on backwards? Or are they the same ?

[@cra2cra226]

Best question

[@pamelaDabestest]

What size bit was used? Help I bought the part but don’t have the tool

[@chrisg.8943]

would of bee real nice if you showed how to test it, to make sure it was bad.

[@ButtChew]

I have a whirlpool electric dryer, the back does not come off this way at all (I have no clue how to get it off, it seems welded/fused to the back). Model is GEQ9800LW1

[@KennethN]

How do you know if it is the fuel that needs to be replaced?

[@mariaburgado2920]

Steve, great video! Got the part and got it running! Thanks a million!

[@TomBVoxman]

Thanks so much for the video. My Whirlpool is not blowing hot air but how do I determine if the fuse is bad or the heating element is bad? I already removed the fuse but the heating element might be above my pay grade..

[@SonicOrbStudios]

What's that component right below the thermal fuse?

[@indigo2005]

thanks Steve. I just changed my thermal fuse and my dryer works now.

[@cyrilharris]

Thanks Steve, well explained

[@CH-jz2xz]

Thermal fuse is for what? My Whirlpool dryer is turning on but no heat, will replacing the thermal fuse fix it?

[@lord_beethoven1169]

Any idea how to remove the wires if they are stubborn? Trying not to cause any damage getting them to force off.

[@ahaley114]

Just did mine. I put on a glove and pulled more forcefully.

[@devinliddell]

Thanks so much for this! Very clear and helpful. And now my dryer is back working!

[@Msleelee9487]

i changed it but it didn't start up and had a hard time putting the vent back on probably time for another dryer I tried

[@ckre4d]

my dryer stopped mid-load and now it won't start again, i have an estate dryer and don't know if this is the same layout or if the thermal fuse is even causing the problem. Is there any advice you have?

[@partselect]

Mary Driscoll What model number do you have?

[@jamesonfrogge5298]

I heard an electrical pop while trying to put the safety cover over the power cord wires, now it wont start do u think this is a fuse issue???

[@partselect]

+Jameson Frogge You may have shorted the cover to a wire on the terminal block. This would cause a fuse or circuit breaker in your electrical panel to open. Unplug the dryer and check the cover for signs of an electrical arc and reposition the wire terminals if necessary. Make sure the terminal screws are tight. Replace any blown fuse or reset the breaker in the electrical panel and remember to always leave the appliance unplugged until your repairs are complete.

[@Raccoon_Mama.]

Thanks, now I can make this repair myself!

[@mikemanno02]

What about a gas dryer...?...anything to different if its a gas dryer...?...thanks...

[@RichardSmith-oy7mx]

Best instructional video

[@LynnwoodCrossfit]

Thanks guys! Super easy to follow, perfect for what I needed. Bests.

[@gowbie]

Thanks Steve, this was a huge help

[@Coleone071]

The motor and drum of my Amana Dryer 7929 run when the start button is pushed. However, the timer does not move and there is no heat produced to dry the clothes. May I know what the problem is and a possible solution please?

[@partselect]

Don Coleone This model number is incomplete which makes it difficult to narrow down the possibilities. If you are using an “Auto-Dry” cycle that may explain the timer advance issue, as heat is required to activate the thermostat controlling the timer motor. You may have a defective heating element, cycling or high limit thermostat or defective timer or motor contact that is creating the no heat issue. Have you verified that you have the proper voltage at the electrical outlet?

[@Coleone071]

***** The model number is NED5240TQ0. This number may also help: DWJR-ELE-2406026-FM54. Thanks.

[@melodymakermark]

My dryer vent is on an interior wall so the lint (what the screen doesn’t catch) has to pass through the hose to the wall, take a 90 degree turn and then blow vertically all the way up and out at the roof. Over time it builds up, so I have to go up into the attic and separate the ridged vent pipe. Using an empty peanut jar, (which is just slightly smaller than the vent pipe) weighted with pennies and with a string attached to the lid, I insert it into the pipe and drop it down the pipe. This knocks the lint buildup down to the 90 degree turn where the dryer hose attaches to the wall. I asked an appliance repair tech what method he used, and he said a leaf blower, but I do not have one.

[@Nick-cm3hi]

How to you figure out the thermal fuse must be changed?

[@DeborahChapin]

Thanks for your videos, by the time I’ve done them all I’ll have rebuilt my dyer and it will be new!!! I replaced the door switch but that didn’t solve my problem so now I’m going to try the fuse and after that I don’t know exactly which one of these videos I’ll try. 🤣 The pushbutton switch just doesn’t seem to engage or turn the dryer on so I suspect it could be the fuse. Then I might try the heating elements. Then what’s next? Thanks

[@amd2623]

I can hear the timer ticking when I press the start button but it doesn't start. Does this sound like a common presentation for a blown thermal fuse?

[@whatmmmmm]

Are all thermal fuses virtually the same... Could you use one from a different model?

[@carianin5293]

This about as good as it gets! Great simple video.

[@dumpstertrash420]

My dryer doesn't open on the back... or bottom... Looks like I have to deconstruct the entire enclosure to get to the fuse.

[@bobaldrich5379]

Nicely done, really clearly explained!

[@partselect]

Hi, Amanda! Have you had any luck here? To clarify - is it that you can't locate the fuse, or you're finding it physically hard to reach the fuse? Any details you can provide would be helpful! Thanks!

[@Iyarna666]

Hi I have a whirlpool condenser dryer it was working fine now it won't even power on its not that old I've changed fuse moved it to another plug socket in kitchen etc don't know what else to try

[@partselect]

+Kerry b What is your model number?

[@Betsybradley15]

hello i have an issue i have no heat to my roper dryer i have replace the thermal cut off kit and the fuse and the cycling thermostat. what else can i do i have no idea what to do next. please help.

[@partselect]

+Betsy Bradley What model number do you have?

[@adriasmusings71]

We were able to fix my aunt's dryer with these videos but my question is, where can we get a 1/4" Nut Driver like the one in this video? We went all over the place, Lowe's, Home Depot and a few local stores but couldn't find one like the one in the video.

[@partselect]

Most quality hardware stores or auto supply stores do sell these. I use two of these in our videos, one from a local hardware and tool supply store and the other from Snap-on tools.

[@badocat82]

Harbor freight sells it also home depot does also

[@CarmelaMartino]

I have a Whirlpool dryer that's only 14 months old. Recently, it started making a buzzing sound after it's been running for about 10-15 minutes. I think it's the buzzer alarm that's supposed to signal the dryer is done, even though I have the buzzer alarm set to "off." I have tried turning the alarm to "on" and back to off, but the problem persists. Any suggestions?

[@davidhooker6528]

I have a whirlpool dryer model number LE7080xtw1. The dryer will run on the 10 timed cycle with heat and the cool settings only. Any ideas what would be the problem? Thank you for your help

[@crazyryan808]

Hi Steve. I have a whirlpool dyer spin but no heat. So I changed the thermostat by the blower motor. I notice that the old thermostat is a 120v and the new one that I got is 240v does it matter? Pls help

[@BOICLUTCH]

It won't cut on, as in start. It's almost like it's not even plugged into the wall socket. I solved the problem some time ago but thank you.

[@SpiritCrisis]

I have a WED5600 dryer and I cannot figure out how to remove the back. There are screws but its seams are painted over and when I try to remove the back it just sits solid. Tried breaking the seal of the paint on the seam but it doesn't seem that is the only thing holding it in place.

[@kylebrooks2101]

My whirlpool still runs but the heat decided to stop working, I reset the circuit breaker, but that isn't the case. I took off the back panel to look around but the heating element is wedged too well to get it out for a look over. it's a LHE6900N0. I went looking online and it true to direct me to LHE6900W0. Diagrams call it a box heater instead of the element.

[@partselect]

Our information shows the heating element assembly to be part number PS11742505. You should check the heating element and thermostats for continuity with a multi-meter to determine which part or parts is at fault.

[@qccg03]

My GE Dryer I think is overheating. I replaced the drum support bearing and the drum rear bearing but it still scrubs and it's almost like I can see fire firm the back of the drum like it's overheating. What else could it be?

[@trevytrev6052]

Thank you you have helped me a lot and saved me money also thanks again

[@BOICLUTCH]

I have a question. My model number is CEDS563SQ0. My dryer was working yesterday ,but today it doesn't cut on. Electricity flows to it so I don't think it's the outlet. I never had a problem with it before. Does it sound like it needs a new thermal fuse?

[@blancamartinez4771]

Hello quick quest my whirlpool dryer works but has no heat can you tell me what could be wrong with it model#LEQ9508-PWD, serial # MS2422190 thanks

[@partselect]

Blanca Martinez Here is a link to my dryer diagnosis video. Hopefully this will help you! www.partselect.com/Repair/Dryer/Not-Enough-Heat/

[@A-Monkman]

Sorry for the stupid question, but my dryer's model number is Wed5700vw0 I don't know the name of it. Will this method and part fix it?

[@danielglenn2113]

Have to hold start button down to stay running. start relay was burnt replaced but still have same issue?

[@dieselxdan]

Would this be for GAS dryer also?