Angles can be taped easily with a compound tube and do not need a roller to set the tape.
Пікірлер: 71
@curtwehrmeyer1248 жыл бұрын
I bought the same Can Am and I get the same results in the Northern part of Wisconsin! It works great and I got it from your videos so I thank you. Cheers to the MudSlinger!! A little Iron Maiden goes a long way when doing this kind of work.
@mgrantom4 жыл бұрын
Wow! Love watching someone that really knows their craft! Thanks for sharing!
@gme109554 жыл бұрын
I got rid of my corner roller years ago when I bought the Better Than Ever corner tools. The 2" flusher works fine for bedding and glazing the angles
@lefyre12667 жыл бұрын
Just when I think I've seen every method, I get surprised again. Very Interesting idea, I'm always looking to improve the quality of my corners. Have another house to tape in 2 days, Im a supertaper(small job) and bazooka(largejob) guy, but will clean cobwebs off tube and applicator and give it a try.
@Mudslingr7 жыл бұрын
Give it a go. Just remember not to press too hard with the tube. After all you can only set the tape so far. Hardest part is figuring out how much mud to put on top. A little practice.
@VidzMisc8 жыл бұрын
thanks for the demonstration, i am now considering investing
@jonathangiraldo21485 жыл бұрын
Thank you for keeping the trade alive.
@Ocanadakiter7 жыл бұрын
Thanks. .yeaa new to me use to rock the super taper before...Guess i will just keep on practicing. . cheers and Merry Christmas from vancouver island. .
@jonathanwise42526 жыл бұрын
Thank u mud slingr. U helped alot.took wheels off..i think it just needed broke in.likeany auto toos..now I can feel it float..taping angles with flushers works perfect..still learning to second coat with flusher tho
@Mudslingr6 жыл бұрын
Jonathan wise I'm happy it is working for you. Good stuff !
@Ocanadakiter7 жыл бұрын
Great video as always ..I'm going to try this way next time.
@MarvelSnap592 жыл бұрын
I tested your technique which works well but once dry, did you finally iron it wider for the finish?
@Mudslingr2 жыл бұрын
Yes. This was a 2" flusher. When it's dry at some point of my routine I will put on a finish coat with a 3" which covers the 2" edge. That video will be coming up in a few days. It's usually the last step of my routine.
@MarvelSnap592 жыл бұрын
@@Mudslingr Thanks👍
@Ocanadakiter7 жыл бұрын
Thanks ..yea probably going to go that route. cheers from van island.
@bobs61295 жыл бұрын
ah that saves so much time not using a roller and using the angle applicator thanks brother
@Mudslingr5 жыл бұрын
You're welcome !
@mtec87438 жыл бұрын
thats the shiz keep the videos coming. trooper is the song
@bysdto8 жыл бұрын
Where can one purchase this tube and corner application and do you also have a tool that does the flat surface taping? Thanks
@Mudslingr8 жыл бұрын
All-Wall is a great place to get tools. They are very helpful. Look here. www.all-wall.com/Categories/Compound-Applicators/
@user-ti2vw3oo5o3 жыл бұрын
Good tips.
@tygr70037 жыл бұрын
hi, im wondering why you choose to do it this way rather than useing a roller. I can clearly see that it works, but its still the same number of steps and in the end uses a little more mud. do you find it gives you a knowtessly better finish, or is it simply to avoid having to carry a roller?
@Mudslingr7 жыл бұрын
Sometimes a roller will squeeze the mud out too far or not enough depending on the angle. By embedding and adding mud to it with the tube I am guaranteed a filled and feathered finish.
@jonathanwise42527 жыл бұрын
Does the bte and Columbia 4 wheel inside applicator only run mud out 1" lime the can am?I kno the plastic tapepro and tapetech are wider
@Mudslingr7 жыл бұрын
I could not tell you that because I have never tried BTE or Columbia applicators. I take off the wheels on my Can-Am. I like to feel the head float on the mud. Let's me know better how much I am applying.
@rzbanshee3507 жыл бұрын
hi,how much water are you add roughly to a bucket of mud?are you using a full compound tube of water to mix your mud roughly? thanks
@Mudslingr7 жыл бұрын
kzbin.info/www/bejne/qWW0kKZ6rNdqadU
@jonathanwise42526 жыл бұрын
Does can am applicator run both ways?I have mud start spilling every so often..builds up behind applicator. Am I pushing 2 hard
@Mudslingr6 жыл бұрын
Have to run it a little slower and lighter touch so you don't squish it out while running backwards. Like you have figured out, just a little practice. I only run it backwards on stand ups. Not always neatly. Too messy on upper angles to run backwards.
@puttyman.paintpark Жыл бұрын
대단한 영상 입니다! 감사합니다! 👍
@jonathanwise42527 жыл бұрын
Do u use plastic angle applicator?Like tapetech? I wonder if they run mud wider than can am metal ones
@Mudslingr7 жыл бұрын
I only have Can-Am applicators. I flush my tape with a 2" and finish with a 3".
@dominicbernardo6 жыл бұрын
Innovation is for the brave! I like it keep it up
@king99686 жыл бұрын
Oh Great Slingr of the mud couple questions bout the tube system do you do your upright angles and let them dry then the top angles ive been having issues with the tape folding over in the three ways when flushing also I use dura bond most of the time should I wait til im on second coat or just run my angles through the mesh? great vids love the one with the tunes.
@Mudslingr6 жыл бұрын
I like to do the stand ups all the way around first. I'll give the tops a wipe after I do a room. Then I'll start the top angles where I started stand ups first. They should be dry enough not to snag since I've wiped them already. But if you only have a room or two there isn't much drying time. Don't flush all the way into the three way. Stay a flusher head away from the three way. You have to clean it up after anyway. Thanks !
@king99686 жыл бұрын
kewl that makes perfect sense ill give that a try tomorrow Thanks!
@mwj51505 жыл бұрын
Mud Slingr when you do your 3 ways are you only costing one side of each joint? Meaning the flusher isn’t going tight into the corner. Great vids.!
@vyaterminaciones5 жыл бұрын
Wow!!! Nice job!!! Thank you !!
@jonathanwise42527 жыл бұрын
I have bte inside corner applicator 4 wheel.it don't glide smooth and mud spills over the edges.advice?
@Mudslingr7 жыл бұрын
I like to take my wheels off. This way I can feel the head float on the mud which let's me know how much mud I'm applying. It's all in the speed and pressure.
@frankvoge16105 жыл бұрын
No wheels at all? I have a 4 wheel and found it applies too much mud.
@kevinwhite37888 жыл бұрын
Hey mud slingr great video! what angle applicator do you use? I been running the bte with the 4 wheels and I can't get it to run a clean consistent bead of mud in my corners.
@Mudslingr8 жыл бұрын
I have the CanAm applicator with two wheels. I have a four wheeled but take two of them off. Works well without wheels also I find.
@robbob48726 жыл бұрын
what about the globs you left where the tape meets the ceiling? You still have to go back and clean them up...
@Mudslingr6 жыл бұрын
You mean the 3 ways in the closet ? Yes.
@riderrrr2068 жыл бұрын
Great technique Mud Slingr. I have tried it and it works great. I just had a question for the second coat. When I use the tube to apply the mud for the 2nd coat, the applicator drags and does not move easily. do you know why? it is a Columbia applicator. Thanks.
@Mudslingr8 жыл бұрын
Are you getting enough mud on to flush it out properly ? If so , you may have to live with the drag. But I bet it's because your flusher is new ? Work it in a bit. It will get smoother. I prefer two top wheels if any. And I like to feel my tube riding on a bed of mud which slides real nice. Just a matter of speed and pressure of the mud coming out. I'm sure you realize you don't have to push hard into the corner with the tube.
@riderrrr2068 жыл бұрын
+Mud Slingr thanks for your reply. First coat it is very smooth and flushes really nice. But second coat, the applicator doesn't slide. I see your point that the applicator has to slide on the mud. I am not feeling that. How can I get it to slide on the mud? my applicator is 4 wheeler and second coat leaves black mark on the corner since it has a black coating of paint.
@Mudslingr8 жыл бұрын
Take your bottom wheels off. That should make the difference. All wheels off is good too but you have to really watch how much pressure you apply or else you end up squishing the mud too wide and end up with ridges. Sounds like you got it though.
@riderrrr2068 жыл бұрын
+Mud Slingr thanks..will give it try!
@BushmanCanuck8 жыл бұрын
I've never seen you wet tape with for example a super taper. Why do you prefer dry tapeing?
@Mudslingr8 жыл бұрын
I prefer an auto taper actually, but only on larger residential jobs. I also prefer dry taping over a supertaper or a shitbox. A little slower but much cleaner. And it works very well.
@BushmanCanuck8 жыл бұрын
+Mud Slingr I see its very clean, and you have it dialed in. Is it how you originally learned?
@Mudslingr8 жыл бұрын
Auto tools originally. When I went on my own I saw a really tall dude using a tube even though he could have taped an 8' ceiling off his knees. Threw my shitbox away and never looked back. Haven't used a roller with this system in about 17-18 years
@ray6504208 жыл бұрын
good tip, thanks
@laurentaouate31148 жыл бұрын
HI. That's interesting. I discovered your videos recently and i can learn a lot from seeing you in action. Thanks for that. What is the brand and size (length and width) of your trowel in others videos ?
@Mudslingr8 жыл бұрын
I use only flat Marshalltown trowels that are approximately 11" x 4-1/2".
@laurentaouate31148 жыл бұрын
thanks. Appreciated
@nathanielmccoy63847 жыл бұрын
Pretty cool tool but don't see the use in it if you know how to run a bazooka cause it's twice as fast unless it's a small job and not worth getting a bazooka all dirty .
@Ocanadakiter7 жыл бұрын
i cant afford a angle box at the moment so i better get more practice at this.Going to buy a set up sooon.
@Mudslingr7 жыл бұрын
Doing angles with a tube works just as well as an angle box.
@Ocanadakiter7 жыл бұрын
How thin should my mud be ?Thanks Ryan. .
@Mudslingr7 жыл бұрын
Best way to describe it is like pancake batter. Quite thin. If you're pushing too hard with your flusher or not filling properly thin it out some more.
@Ocanadakiter7 жыл бұрын
Ok thanks think i made it a bit thick today lots of excess mud and tapes didn't look beautiful. Also got a few small wrinkles. Was using flusher head with wheel.Not sure if i like using it...😂
@Mudslingr7 жыл бұрын
When applying the mud with the tube I like to feel the head float on the mud as I fill. Don't want it to touch the wall. Keeps from taking mud off the angle and leaves just the right amount. The fill on top of the tape is more important. Just takes practice.
@austincheramie7 жыл бұрын
What size tube is that? your awsome , speed and quality of work is amazing
@Mudslingr7 жыл бұрын
Thanks. It's a 42" tube. I also have a 24" that is great for tight areas.