Use this link to buy anything on Amazon and it will contribute to the channel costs you NOTHING! amzn.to/2R0LGvD
Пікірлер: 76
@jamiewalton233 жыл бұрын
Really impressed Mike working to 70 microns on your garage floor, defo a sign of a true mechanic buddy, loved the DTI stuck to the vice grip
@johnwurst6691 Жыл бұрын
Great video. I like how you point out the German spare parts and using Knipex pliers😂. My German countrymen would have a hernia watching you putting this thing together on the garage floor. Good luck!😊
@dragospahontu3 жыл бұрын
+Respect for doing these on your own
@sooperzero40873 жыл бұрын
Amazing job. Thanks for the thorough video.
@juancopini7813 Жыл бұрын
Good job, very helpful, thanks!
@MC-ei3lo2 жыл бұрын
All the measuring and finial snap ring selection results in 0.15mm (0.006") clutch drum end play, easily accomplished with a feeler gauge between the selectable snap ring and drum. Confirm it by measuring the original clutch end play, it will be between 0.10 (0.004") and 0.15mm (0.006").
@Mikefngarage2 жыл бұрын
Yea I am goin to check that next time. I really dont like the way they measured this in the book
@RobsDIY2 жыл бұрын
My feeler gauge is between 0.1 and .15mm I don’t have a dial guage Is that within spec then if I struggle to get the 0.15 under? But the .1 is pretty easy ?
@MC-ei3lo2 жыл бұрын
@@RobsDIY That's fine. With feeler gauge clearance, we are confirming that the clutch assembly isn't eliminating endplay of the input shaft in the transmission case.
@RobsDIY2 жыл бұрын
@@MC-ei3lo nice I got my r36 clutches and flywheel done myself following the feeler gauge method, did 20 adaptations of each clutch with vas and drives like a dream Thanks for that information 🙏
@mazpr2025 Жыл бұрын
@@RobsDIY after installation of new clutch, it needs to be reset in the ECM?
@StefBosquetti7 ай бұрын
Thanks for this video! Kind regards
@kafyr9377 Жыл бұрын
Very nice video, tanks for you tutorial dsg clutch 02e transmisión vw
@thierrybofraille6687 Жыл бұрын
Good job you are a boss
@Naviev13 жыл бұрын
Great job. your box is the 6 speed? DQ250 With those kilometers the Mechatronics has not given you problems. how much did it cost to kit?
@Juhzi2 ай бұрын
Big locking ring dont fit to clutch basket, any ideas? Measured and re checked all, but no.
@djsonicc2 жыл бұрын
To answer the question on price, they're about $1k now
@hammermond4 күн бұрын
@@djsonicc about $600 now. Aug. 2024
@joeworgan63122 жыл бұрын
Hi, what a great video. Do you have a video or removing the transmission?
@jeremyfrydenlund6888 Жыл бұрын
Do you have a part number off that kit? I'm looking to do mine soon on a 2013 passat it's starting to give me problems.
@Naviev12 жыл бұрын
Good morning, the tool T10524 in my case and I imagine that in your case the tool T10303, is it really necessary for the installation of the clutch discs? I don't understand what the tool in question is worth.
@Mikefngarage2 жыл бұрын
sort of it keeps the clutches from falling down when your doing the measurement. You could make something out of wood. if you wanted to. if the clutches become misalligned your measurement will be off and the snap ring wont go on.
@Naviev12 жыл бұрын
@@Mikefngarage Then the only thing it does is that the clutch pack does not go down? The clutch pack has a movement of a few centimeters. So I am asking for the utility?
@RSigel Жыл бұрын
@@Mikefngarage Hey! I did without the tool and was hard to put the metal lid back (the one we need to mark with a pen before remove)… That’s why this tool is required?
@damianlisek47442 жыл бұрын
Not sure if you can answer this, just replaced the dsg fluid on mine, but need to get the clutch pack changed now. Will a oil top up be necessary with the new pack installed or should it not be necessary?
@zachvw53495 ай бұрын
No you should not lose any dsg fluid when you do this but never a bad idea to check with the bottom 14 mm hex just make sure to keep the 8mm hex straw in the trans
@frankmick86833 жыл бұрын
Assuming you lived in AZ at one point. Have you had any dealings with Dons Bus Box ?
@Veikra3 жыл бұрын
That's a lot easier than I thought
@Mikefngarage3 жыл бұрын
not hard really....Do them when you do your DMF...pulling that trans is a pain. unless you have a lift and a full sized upright trans jack. and you dont forget anything on the top.
@Benchpress2602 жыл бұрын
Would that 1.85mm constant value spec be the same number I would use for a 2016 Volkswagen Golf R with the DQ250? Thanks in advance!
@milanchytry85583 жыл бұрын
Good job Mike ,interesting ,Milan
@daniellaws41232 жыл бұрын
Do you have the part number for the shims? I have bought a new non genuine clutch pack thats good for 600ftlbs of torque but it doesn't come with the shims to set the end float.
@Mikefngarage2 жыл бұрын
no but i think they sell them at ID parts. they are not cheap. they come with the original replacement kit at cascade german with the clutch drum and new clutches. all together. one kit that is what I do now.
@geheimgeheimer1907 Жыл бұрын
Ich versteh echt nicht welcher Wert rauskommen muss wenn man die 1.85 addiert. Was muss raus kommen welches Spiel muss die Kupplung haben..ich schnell es nicht
@jasonpaine95463 ай бұрын
do you need to drain out the fluid todo the clutches?
@dionisisziridis53312 жыл бұрын
Could you tell me how it turns out the number 1,85? I didnt understand it. Thank you.
@LynxStarAuto2 жыл бұрын
The 1.85 is the base number VW has you add your measured readings by. Whatever you measure and subtracted, add 1.85 to that final value.
@dionisisziridis53312 жыл бұрын
@@LynxStarAuto 👍
@Naviev12 жыл бұрын
I live in Europe, my car has 200,000 km it gives me problems with sudden changes. A tapping sound in D and R until it heats up then disappears. change the DMF but I do not improve. What do you think will be Mechatronics or Clutches. Could you tell how you did the adjustment of the clutches when it was mounted on the car?
@Mikefngarage2 жыл бұрын
hard to say on that one. could be either do you have any codes?
@Naviev12 жыл бұрын
@@Mikefngarage Going through the scanner does not show any error in the gearbox.
@LAW-fv6ys2 жыл бұрын
Your clutch pack is at fault and will need replacing.
@giosoto25692 жыл бұрын
Why is shimming so important? What happens if you don't shim? I would like to understand the concept of it . I'm about to remove the trasmission a 3 time and this time I wanna take my time and understand every step so if someone is so kindly to explain
@Mikefngarage2 жыл бұрын
shimming must be done. THe computer will not recognize the values unless they are in tolerance.. There are a few videos on this stuff. some guys use the flat shims too go get a better tolerance. Use the formula in this video and you should be good. I did it 2 times too. so dont feel bad.
@chasedavis23588 ай бұрын
If you get your own clutches, measure them completely dry
@benturvill Жыл бұрын
I’m about to do this job, is it worth emptying the gearbox oil before dropping out the dsg?
@Mikefngarage Жыл бұрын
yes you will need to refill it. get an oil change kit for dsg. Check Cascade Germán for the parts. Cheapest original quality parts available.
@smokedadowg2 жыл бұрын
I have a 2014 Audi A3 1.4tfsi with 75k miles it will only select the even gears and reverse and has error code p073f any ideas? Any help at all would be highly appreciated
@Mikefngarage2 жыл бұрын
Mechatronic or valve body I think. One of the 2.. Mechatronic comes with valve body. BUt they are not cheap. best place to buy is ECS tuning.
@satishchand8310 Жыл бұрын
Nice
@robk70916 ай бұрын
Best not to film with the camera behind you, always in front or front and side or we spend most of the time looking at your back and shoulder and can't see what you're actually doing.
@rustyr-garage56673 жыл бұрын
WOW to fix DSG I would like to know. 👍
@Mikefngarage3 жыл бұрын
not much goes wrong with them the clutches and the valve body. Hard parts last so many miles they rarely fail.
@momenttous81742 жыл бұрын
@@Mikefngarage really? Could I dm you? I’m getting crazy quotes from the dealer. Looking for someone who could fix it for cheaper otherwise I’m thinking to get rid of it at 91,000 miles
@Mikefngarage2 жыл бұрын
@@momenttous8174 yea the dealer is a rip off for repairs on the trans. They only want to replace the whole thing. Check TDI club. they have a nation wide map of people who work on these cars great resource. www.google.com/maps/d/u/0/viewer?ie=UTF8&hl=en&msa=0&t=h&z=3&mid=11ICU3ONK-3cragvamma9vBof96k&ll=44.33099314760797%2C-113.06580350000002
@mateszilagyi232711 ай бұрын
how many kilometers does such a clutch go in a passat bitdi?
@KevinsFawcett Жыл бұрын
Do you have any photos of warn out clutch kit?
@LynxStarAuto2 жыл бұрын
I think 200k is generous. More realistically, I see these clutches fail around 130-150k. Then again, I live in hot ass Miami, FL. With no inspections, and the shittiest traffic known to mankind.
@momenttous81742 жыл бұрын
How many miles u got? How’s it going for u
@Mikefngarage2 жыл бұрын
I gruess it depends on how you drive it. My 2006 has 250k miles. never had clutches done. My 2009 started having issues at 250. If your always creeping foreword it causes wear on the clutches too. When I am stopped I hold my foot firmly on the brake pedal and dont creep. your right Miami area has the worst traffic I have even been in. I always use the surpass express lanes when I am there.
@jasonsejkora4578 Жыл бұрын
If anyone has the file to 3D print that specialty tool hit me up. My buddies son has one and prints stuff for people. I need one for upcoming trans project.
@W0LV1E452 жыл бұрын
Do you need to reprogram the transmission like Hyundai/Kia when you replaced the dct clutch pack?
@jesuszaratelopez26055 ай бұрын
Pon lo en español amigo🥺🥺🥺🥺🥺🥺🥺🥺
@dragospahontu3 жыл бұрын
How long did the original clutch set last you?
@Mikefngarage3 жыл бұрын
240 miles I started to get a code and clicking. so they have been bad for a while 267mile on the clock now like 400 plus KM
@catalinnicolae44433 жыл бұрын
@@Mikefngarage Mike can you please rectify, are you talking 240 miles or 240 thousands of miles, which is 240,000 miles. This is really important isn't it?
@LynxStarAuto2 жыл бұрын
@@catalinnicolae4443 I think he meant to say 240km which is 150k miles for us in America. Which on average is what these clutch packs seem to last. I service these cars for a living, and rarely see them exceed 150k without symptoms. 130-150 seems to be the "uhh ohh spot". Also the factory spec is 200km which is 125k. Which is usually a bit exaggerated.
@totallytame25573 жыл бұрын
I have a 09 tdi with a dsg in it I'm about 2 do my 1st fluid change. Do you have a video in how 2 do it the right way?
@johnovegas Жыл бұрын
this guy has some serious anxiety
@zepus1698 Жыл бұрын
Poor video show. Most of the time, the gearbox and the job is obstructed by the mechanic. Not very instructive.