For phone users Timestamps: Supplies - 1:30 Megaman X - Hot Water x Hair Dryer - 4:53 Figma Deku Clone - Pledge Floor Care Mod - 9:44 Marvel Legends Spider-man - Super Glue Water Method - 12:06 Clone Revoltech Wolverine - Soap x Hair Dryer - Loosening Joints - 14:42 Clone Figuarts Spider-man - 17:00 S.H. Figuarts Gotenks - Face Plate Tightening - Super Glue x Accelerator Mod - 17:17 McFarlane Cuddle Team Leader - Back Bling Fitting - Hair Dryer Method - 20:49 Toy Biz Raimi Spider-Man 2 - Super Glue x Water x Pledge Floor Care - 21:49 Clone S.H. Figuarts Hulk - Super Glue x Water mod - Joint Tightening - 28:01 Figma Genji - Pledge Floor Care Mod - Tightening Joints - 29:27 S.H. Figuarts Goku (original) - Pledge Floor Care Mod - Tightening Joints - 31:00
@dannythecheeto74815 жыл бұрын
Underrated comment
@psychopotato71825 жыл бұрын
Thx
@russiagear92125 жыл бұрын
Lol thanks
@rizalwinata5 жыл бұрын
Ty
@jayskiiix5 жыл бұрын
Thx
@victormeyer41165 жыл бұрын
The broken parts can be reconnected , yes it involves superglue but also a metalic wire(this can be obtained from paper clip) and also precision and technique.Make a deep hole(in the center) to both broken parts in order for the metalic wire to fit and put superglue to the end parts of the wire and also put superglue around the holes of both broken parts .In the end when the superglue has dried then put supergluer around the connected area.From an estetic point of view it won't be appealing.
@AGuyNamedIan5 жыл бұрын
You Watch Jobby, Hmmm A Man Of Culture I See
@ryanle53835 жыл бұрын
Bruh, it's like toy review with Filthy Frank. I found his channel like 3 years ago. Knowing have stepped on a gold mine, I mined all his videos in few weeks XD
@christianwithk14765 жыл бұрын
Am I the only one getting toy story 2 vibes....
@sebastianlozanofilms5 жыл бұрын
Stealth KY you can’t rush art
@jacksonUSA4 жыл бұрын
No i am to
@dragon-jx4zj2 жыл бұрын
I agree
@BrianHallmond4 жыл бұрын
26:40 me too!!!! I bought that figure after I got my first job when I was 17. I always wanted a Spiderman toy when I was a kid. Mine is super loose now too and I remember him being so great. I'm so glad I can't try fix him! Thanks heaps!!!!
@Tedwinscrandesar5 жыл бұрын
11:39 “I don’t wanna be a hero anymore “
@FloofyCloud1155 жыл бұрын
Teddy Rider77 oh my gosh 😂
@hypnos_debts79775 жыл бұрын
There not dolls mom there action figures
@Borger39414 жыл бұрын
😂😂😂 what Shartimusprime says
@mungofinalfi44804 жыл бұрын
*They're
@gg_mydog9683 жыл бұрын
Same my dad and my mom always tells me that when I want to buy Action Figures because : ‚,YOURE TO OLD FOR THIS „
@Borger39413 жыл бұрын
@@gg_mydog968 Man I feel bad for ya. Your parents really suck when they say that ( no offense). Whenever my parents see that I want a figure, they are 100% ok with that, especially my dad because he's also interested in the same thing that I am. My mom is just fine with it, but its not really her thing so yeah.
@gg_mydog9683 жыл бұрын
@@Borger3941 damn you’re lucky take care of you you’re figures and your parents
@darkhearsttoys52245 жыл бұрын
For tightening joints, I use clear nail polish, which dries in minutes or seconds.
@2735angel Жыл бұрын
I used nail polish for my super saiyan full power goku's legs and it did not work very good
@suhtangwong Жыл бұрын
@@2735angel did you let it dry out first?
@2735angel Жыл бұрын
@@suhtangwong Yeah but I discovered a new way that works really good: small paper towel piece. Just put the paper towel piece over the ball joint, put the leg on, and boom just like new
@suhtangwong Жыл бұрын
@@2735angel lol yeah that works too lol no one will notice.
@pants9894 жыл бұрын
These are great tips As for the extra strong super glue, I find it works well to dip a straightened paper clip into the glue, and apply it that way, because a drop is generally too much of the strong stuff.
@DCSG815 жыл бұрын
Will add this video to my LIKED video.. watching it later! Thanks for sharing!!
@CHloE7485 жыл бұрын
...you know there is a “watch later” button on every video right?
@andrewivan6162 жыл бұрын
i can tell you really love figures the way you touch them, thanks fot the tips!
@Jack-b5o6r5 жыл бұрын
Wow great info .... the five year old in me cried out for joy when I saw you fix them back to health! You’ve earned a new sub for sure
@mr_bropo5 жыл бұрын
Two uploads in one day?! Heck yeah
@hammskie054 жыл бұрын
I just fixed a bootleg sh figuarts vegito with the superglue trick, IT WORKED LIKE A DREAM! I'm so excited right now because this is my first time modifying a figure, AND I needed a Vegito figure.
@j0doe15 жыл бұрын
19:06 "It will fuse!" He says while repairing a fusion.
@ZenRyoku5 жыл бұрын
oh shut up.. THEY ARE COMIC BOOKS!!! 😂LOL JK it's funny talking about "graphic novels" thang... ppl get so up in arms over that kind of stuff... lol
@karnagecworld98205 жыл бұрын
Thanks for this! Very useful! I have a few figures in my collection in mind that could use some of these treatments.
@NaiveSteve5 жыл бұрын
Guys don't use the hair dryer like he does. Obviously he shows his mistake but you should never use the hair dryer as close to the figure as he did... Melts plastic, ruins paint, warps easier etc. Hold the dryer about two inches away for great results
@NaiveSteve5 жыл бұрын
@@dstar01 still a little too close for my tastes but I did see that. This comment was written while watching the video. I have finished it now
@willisjackson70293 жыл бұрын
@Commissioner Badgeface Have you gotten an answer or tried anything yet? If not I've used clear gloss paint from Tamiya (clear X-22) is the item number. I hope that that helps. But there are other methods as well. Just let me know and I can recommend some other methods if that would help. It all depends on the size and weight, type of joint, ect., ect.... That way you or I can better assess what method will work best for the figure that you want to repair.
@RichardULZ4 жыл бұрын
Highly recommend silicone shock oil for loosening tight or stiff joints. Designed for professional RC car shocks, it's safe on plastic or metal and way more effective than soap or hot water. Had great success on brittle nendroid joints, and fragile locked/squeaky joints for a Chogokin Fireball Charming Drossel.
@uryuu3005 жыл бұрын
I am happy this was in my recommended feed! I will definitely try the pledge floor care method for the joints on my Indoraptor figure; it is already getting loose in some places.
@GuyWebz5 жыл бұрын
I will be using the super glue & accelerator trick on Gotenks’ face
@raddad88475 жыл бұрын
Try using clear nail polish first
@joemarvel42704 ай бұрын
Spider Man 2, I had one of those bad boys growing up, and ALWAYS talk about how elite it was as a toy. Absolute favorite, even after the fingers on the left hand came off. I treated my action figures well and didn't like to share, and that was why. Next time the leg got ripped off, and my Iron Spider figrue got it's arm broken off. I was almost happy when I started getting bullied for "playing with dolls" after 10. Almost... still made me stop playing with them at 14, and sold them all when I moved out at 19. Huge mistake....
@warrenmak5222 жыл бұрын
The title of this vid should be "watch me become a figurine surgeon for 36 minutes"
@mootroidXproductions5 жыл бұрын
I really appreciate this, thank you so much- think you could do some serious joint repairs for breaks?
@Tedwinscrandesar5 жыл бұрын
Further more 19:17 is the hidden Simpson child that was lost in time
@shaunpark96025 жыл бұрын
i used the super glue/hot water method on my marvel legends black panther, and it worked really well!
@AvosChannel5 жыл бұрын
Great video bro 🤙🏽but tour thumbs made me uneasy 😂 they are so flexible 😂
@raddad88475 жыл бұрын
Try clear nail polish in place of super glue and water.... the handed of ruining a figure goes way down and works just as well.
@thered_hood74515 жыл бұрын
nice dude, i actually thought you just leave em all in one box forever lol
@JinzoCrash5 жыл бұрын
Didn't think I'd learn anything here, but I honestly never saw the super glue / water technique.
@KitbashCustoms5 жыл бұрын
You can use the blow dryer to accelerate the pledge and as far as that stuck knee I believe running alcohol should fix that as well
@KitbashCustoms5 жыл бұрын
Dstar01 damn that’s tragic
@thesentinel55235 жыл бұрын
@13:14 Now I know how the people who saw Jesus turn water into wine felt like when witnessing it LOL!.
@anajjar4565 жыл бұрын
My Piccolo is loose as F. I really need to try the floor finish method. Thanks.
@aymanemoubarak895 жыл бұрын
I liked this video so I can rewatch again if my figures broke(hope not lol) but very informative thanks !
@thepackproductionscyberwol67685 жыл бұрын
With all the spare parts you should try to make a new figuer
@Deadlyblack5 жыл бұрын
I should try that Pledge Floor Care method with my old Play Arts Lightning's leg joints.
@djline25 жыл бұрын
neat i have tones of floor care cleaner now I have a use for it
@edviza19355 жыл бұрын
Jesus I remember in the winter soldier/iron man 3 days of hasbro marvel legends, (2013-2015) they broke SO easily. Their joints were bendable and overall crap.
@gamingfor26075 жыл бұрын
The coolest thing is that he first destroys the toys and then fix them whaaaaaaaat 💪😎
@gmpnj295 жыл бұрын
Good video, thanks for explaining the processes. I really like the Spider-Man Figure also.
@lucasmolina59595 жыл бұрын
It's not been reilly
@C.K862 жыл бұрын
Does the hot water remove paint and after you put it in the hot water will it become easier to come off all the time and dose the same apply to the hair dryer and how long does it take for you to take them off?
@cymruambyth77583 жыл бұрын
Thank you good sir.. I now have the means to fix my figures subbed.
@fullstoppunctuation66924 жыл бұрын
Play the video on 2x, it is way better Edit: also listen to the music in the background. LOL
@lui53925 жыл бұрын
Awesome, about to watch this and I hope this does help me out!
@ZenRyoku5 жыл бұрын
id like to ask everyone, what kind of success has everyone had with transplanting ball joint systems from one type of action figure to a complete different one... * what did you use * what did you try to fix * what type of complete custom fabrications have you tried and made certain things from scratch * how did you feel about using lego ball joints in place of standard action figure types --- i found that the old school ninja turtles (from the early 90's) are the hands down best ball joint systems for any figure ever made, even after 25 years, they still work like a champ. im about to try adopting that whole setup for all sorts of action figures.. ill let you know how it goes
@Rezigunn5 жыл бұрын
One issue I have with these is the pledge floor care. I used to work for a professional cleaning company your fine to use it but don't use it too much on one figure otherwise over time it can turn a milky white and depending on how much you put to the figure itself might show up. Overall not a bad idea but do be mindful of it.
@kunjiklub5 жыл бұрын
Added to my save list. Thanks for sharing!
@Unc-325 жыл бұрын
Thanks I might use the pledge fix for my marvel legends Spider-Man figure
@DalFrostreamZ5 жыл бұрын
Deku clone & spider man : wh-wh-what are you doing that isnt the place t-to put th-that in -ugh~~
@aremdvnasophia5 жыл бұрын
I need to try the Pledge floor care for my Lord Dakkon.
@squidyt92855 жыл бұрын
My yamaguchi wolverine left knee can barely go back so I will try the hot water tequnique
@shonen_weeb33975 жыл бұрын
Awesome videos! Keep up the good work! I love them!
@msha14505 жыл бұрын
Helps a lot! Thanks!
@mattnsg135 жыл бұрын
Jobby the Hong is my favorite KZbin Channel
@MoazIkhlas4 жыл бұрын
Pledge for the win!
@BrunDawgie5 жыл бұрын
Good stuff yo! Fixed my Dr Strange from ML ToyBiz quick!!!
@PanzermansBunker5 жыл бұрын
They make debonder solution to release super glued parts.
@aoliver2125 жыл бұрын
This is great thank you so much!!! If there’s one thing that I hate most in my collection it’s broken figures. Hopefully this’ll help me when I decide to fix them. Subscribed! If there’s one question that I have and I don’t know 100% if you covered it in this video is how do you attach back broken joints? I have a mafex Batman where his leg joint snapped and I used loctite to put it back together but it just keeps breaking apart. I would love if I could fix him and if you have any tips please tell me. I would really appreciate it!
@ItFigures-qz6fc Жыл бұрын
So MegaMan has clones for harvesting parts. Sounds like a sci-fi movie!
@fyeflex77484 жыл бұрын
The thumb though wish mines twist like that🔥
@jeshu83722 жыл бұрын
thank you for this video, excellent tips
@kaijupark5 жыл бұрын
JobbyTheHong is you here my dude!
@peytonmaner5 жыл бұрын
I have some problems with super glue. For some reason the glue makes the joint looser sometimes while other times it makes the joint tighter
@keoni92745 жыл бұрын
Wow, your thumb can bend pretty far but great video man!
@builderpup32524 жыл бұрын
I got an marvel legends ant man and in less than i day his arms became soooooooo lose so like if you barely move him his arms fly around so yeah I saw this vid and watch it and I think I’m gonna do some of the methods to go and fix my antman I also will try to fix my marvel legends black knight I edit my comment when I do it and btw I watch your channle on Xbox for a while and love your vids so I’m gonna sub on phone
@JodaroKujo3 жыл бұрын
Me-Grabs genji figma Me-MINE
@JodaroKujo3 жыл бұрын
Me-fixes cuddle team leader Me-throws against wall Anyways
@izeltheweazle91655 жыл бұрын
Can someone tell me how to fix this I pulled out my shf goku arm don't ask why and it won't fit back in can someone please help me😭😭
@ArmagdoGaming5 жыл бұрын
Is there a way to make a hole in the bootleg Mega Man D-Arts figure Buster attachment to attach the shots?
@GurtMcDirt5 жыл бұрын
No tamiya extra thin cement? I know it's a big tool to have for model builds but should transfer over well.
@tdicarus85302 жыл бұрын
great tips, thanks !
@nazca-_-80615 жыл бұрын
I love Jobby too☺
@iidontevenknow9245 жыл бұрын
This video is really cool!
@buttmuncher63365 жыл бұрын
When I was like 5 I had the super posable Spider-Man action figure my dad got it a pawn shop brand new in the box for 5 dollars.I played with it till I was 8 because I lost it and now it costs over 100 dollars
@pauloeduardoserrajunior43862 жыл бұрын
Hello Man. I bought a Captain America Revoltech Yamaguchi and its shoulder ball joints just, broke. At the first time that I was trying to pose it, it just broke. Do you have any tips on how can I fix it? Tks and congrats for the channel!
@chriscarrete53035 жыл бұрын
Good video man... Definitely alot of optoins. Have you ever tried super weld by jb weld? Good stuff.
@rob72165 жыл бұрын
Think this would work on Hasbro wrestling figures? I have a few that could be tighter due to regular use.
@luizenidog50165 жыл бұрын
How to fix a broken or severed joint using basic material found around the house and keep it moving ?
@jersonmarano78003 жыл бұрын
my sh figuarts sagat has very tight right shoulder now when i try to raise it forward i can see whitening in the ball joint. hope u could help 😭
@fullix5093 жыл бұрын
You should have used the hair dryer on the bootleg vegeta then use pledge floor care on the joint
@rickytoddbotelho95555 жыл бұрын
I repair and customize most of my figures as well.
@legacylaser5115 жыл бұрын
I like that he threw spiderman
@action9933 жыл бұрын
Great video. I have a question that no one is covering. Is it possible to disassemble the DC Direct green lantern line specifically the: DC Direct Green Lantern Action Figures series 1published in 2005 by DC Direct. The arm shoulder joints break easily and require replaced.
@randombirb59114 жыл бұрын
My SROE Goku got his neck joint broken. Not the head or the Neck but the actual joint. It broke while my friend was playing with him a year or 2 ago I think. It recently broke again in the same place 😭
@70versions5 жыл бұрын
This is kind of late but I have a problem with my Sh figuart ssgss gogeta and his arms are extremely tight. So when I tried to loosen it I broke da arm. :/ So I got another one and it has the same problem which is so unfortunate. At least it’s not as tight as broken arm gogeta.
@christisrisen67745 жыл бұрын
Have you made any Vids on how to Make a Ball joint from scratch!? I'm curious to see what method you have thanx
@gabeholland84645 жыл бұрын
Awesome!!
@mr.goodfellas71755 жыл бұрын
I have and it very well In Thailand just 4$ Oh I forgot I want a link buy shf fake
@Pun06885 жыл бұрын
Kikiใช่ปะ
@mr.goodfellas71755 жыл бұрын
@@Pun0688 yesser
@mrmistermelom5 жыл бұрын
21:49
@fernandowada75045 жыл бұрын
This is very useful! Thanks!
@RickG135 жыл бұрын
The link to the Pledge Floor Gloss is for a 6 pack. Other than the product doesnt seem to exist ANYWHERE. I've looked pretty hard. Pledge now has ,"Revive It" with the wood colored label, has anyone tried this one?
@joeyflvkko3 жыл бұрын
Should I try the super glue and water method on my SHF SSJVegeta 1.0? Same exact problem and joint as the spider man used for the water and glue method in the video at 13:15
@cooper12355 жыл бұрын
i used the pledge floor care mod on a 650$ action figure works perfectly now no wiggle and can pose him can't thank you enough
@cooper12355 жыл бұрын
dude thank you for the heart
@cooper12355 жыл бұрын
it's a 2007 ghost rider from the one with movie with nicholas cage
@cooper12355 жыл бұрын
i'm posting a video on him now
@Thepaintingwick4 жыл бұрын
For a stuck thigh swivel that won't move at all, would you recommend heating it up? I worry that it will soften the plastic and just twist/rip the joint inside and break
@christisrisen67745 жыл бұрын
Have you ever used Silicone, and or Hot Glue for loose joints!?
@ethanritter90905 жыл бұрын
one of my expensive figures handlebars fell of would some super glue work to fix this problem? on his bike and i really like this bike it came defective
@junglegymgames7335 жыл бұрын
Does it matter what type of soap you use for the loosening joints method?
@junglegymgames7335 жыл бұрын
Thanks!
@KevinLam865 жыл бұрын
What's the best method to fix a loose bicep swivel on a Mafex Spider-man? The bicep piece slides over the elbow joint mechanism. I need to tighten the peg that goes into the deltoid. Is nail polish safe to use to "thicken" pegs?
@vixorzproductions5 жыл бұрын
have you tried repairing the bootleg Spider-Man homecoming ?
@mangotheif5 жыл бұрын
Do you repair figures for people? My Sasquatch hip joint has been broken for years