Tap to unmute

DTF Anti Static Avoidance System Version 1

  Рет қаралды 1,581

Custom Made By Us

Custom Made By Us

Күн бұрын

Пікірлер: 12
@jeffreyroy4167
@jeffreyroy4167 Жыл бұрын
I have the Seismo M16 which is a different design. I just use some extra powder which adds weight to override any static issues. Maybe you can add more powder to help. Also, I back feed my shaker with film (Ecofreen AWESOME) which really helps. I call it the head and it is about 7 feet long and I use it for months and months. But I am not sure if you can do that b ecause it appears that you don't have a roll to roll.
@BritBratReviews
@BritBratReviews 9 ай бұрын
@custommadebyus did this help with the powder residue on your prints I have it too bad especially when I am putting them on dark garments:(. Thanks so much
@custommadebyus
@custommadebyus 9 ай бұрын
I've never had any powder residue issues on the prints. This may help with that, but can't state specifically.
@magicmanny72
@magicmanny72 Жыл бұрын
If you don't mind, what rip software are you uising please?
@custommadebyus
@custommadebyus Жыл бұрын
I have a Flexi 22 subscription.
@felixfresh7521
@felixfresh7521 Жыл бұрын
I am having the same issue with the paper and the machine. Has those wood slats helped?
@custommadebyus
@custommadebyus Жыл бұрын
The wooden rails have completely fixed the issues I've had with film sticking to the intake tray.
@felixfresh7521
@felixfresh7521 Жыл бұрын
Thanks for making this video! Going to get the wood now!!! @@custommadebyus
@richierich3194
@richierich3194 Жыл бұрын
Was wondering if you like the equipment if you get a chance let us know thanks
@custommadebyus
@custommadebyus Жыл бұрын
I think the equipment is great. There was definitely a some learning to go through, but once you’ve done that and understand your print it’s smooth sailing from there.
@IdleTimeCreations
@IdleTimeCreations Жыл бұрын
I can save you all that hand feeding. I have the exact same machine. Hope you dont touch your print reaching in like that. Let me know if you want some pointers.
@custommadebyus
@custommadebyus Жыл бұрын
I’ve got it setup now where we never put our hands in the shaker. Do you have another system that allows you to not put your hands in the powder shaker?
DTF Film Feeder Part II
10:47
Custom Made By Us
Рет қаралды 732
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
Common DTF Mistakes - What NOT to do!
24:27
Transfer Superstars Direct to Film DTF Printers
Рет қаралды 60 М.
Common DTF Mistakes! | AA Print Supply
5:38
AAPrintSupplyCo
Рет қаралды 35 М.
How to make a GANG sheet for DTF printing
14:09
Ace Eaton
Рет қаралды 6 М.
Laminating and Mounting
9:23
goetterdone
Рет қаралды 107 М.
Which DTF Powder should you use in 2024?
2:32
DTF Superstore
Рет қаралды 4,1 М.
How to DTF more efficiently with the Seismo A13
31:37
A-Dubb Productions Allan Wade
Рет қаралды 7 М.
Should You Switch To Black DTF Powder? | AA Print Supply
5:10
AAPrintSupplyCo
Рет қаралды 10 М.
Wet Capping Ricoma REVEL - end of day.
10:47
Custom Made By Us
Рет қаралды 751
Ready To Press Valentines Day Gang Sheet
43:15
Custom Made By Us
Рет қаралды 337