Hey friend , There is so much information and videos about DTF printers. But in the end everything is very confusing. I understand Epson has DTF printers but they cost a lot of money compared to those that do conversion. But bottom line, due to excess information I can not understand a simple question. What is the best printer that can be converted to DTF? Which brings out the best color quality, and which brings out the highest quality resolution, etc ...?
@KingdomDTF2 жыл бұрын
Sure Color P series, p400, p600, p800, but also 2400, 3880, 4880, 7980 are good.
@samuelanthony47422 жыл бұрын
@@KingdomDTF Please what are the dtf printers that do not need to be converted?
@hamidg3 жыл бұрын
Thanks for this very informative video, I just have some questions: as I beginner if I buy the l800 what ink would I use to do dtf printing and how often do I have to maintain it and how do I maintain it
@KingdomDTF3 жыл бұрын
You need dtf inks if you planning to do dtf, sublimation ink if you planning to do sublimation and so on. Yes, you need to do maintenance to printer is recommended. Check our videos for maintenance or other channels since you can find many info on youtube.
@MoThingsEmpire3 жыл бұрын
What is the best solution for maintenance if you go on vacation for a week or two?
@KingdomDTF3 жыл бұрын
There is different solution and not all of them are the same. There is special solution for this when is going to be down more than 1 or 2 weeks... what brand, I don't know how go they can be. You need to research that.
@thepitstop772 жыл бұрын
Is it better to convert ink tank or ink cartridge printer
@KingdomDTF2 жыл бұрын
I prefer tank since is a bulk system and that way I don't need to worry about that the cartridge will run out of ink faster.
@llcoollasa23 жыл бұрын
1. What are the software for printing? 2. What types of ink we can use?
@KingdomDTF3 жыл бұрын
1. You need a rip software in order to print white ink. 2. You use dtf inks, direct to film inks.
@kabirsoni31722 жыл бұрын
I have one question only Please reply If i have big print to do on a t shirt And i have only a4 size films And i join 2 sheet together of a same photo but different sheet as it is big Will there be a crack Or some sort of line Or it will print good As the. Ink of thick What will happen? Sorry for long question
@KingdomDTF2 жыл бұрын
I don't know, never try it. You will need to try it by yourself and see the results.
@slrhodes Жыл бұрын
Epson XP4105?
@KingdomDTF Жыл бұрын
can not
@slrhodes Жыл бұрын
@@KingdomDTF Thank you!
@CustomizeYoLife2 жыл бұрын
Hello, what do you think about the printer xp 15000? Thanks
@KingdomDTF2 жыл бұрын
Good for beginners also, but L1800 is more stable.
@jhonnypaz18543 жыл бұрын
Hola, como se puede mejorar los colores, por ejemplo tengo problema con los azules, siempre lanza un tono oscuro, siendo que en el diseño figuran azules claros y oscuros, pero la impresora epson l1800 los imprime todo en tono oscuro, Saludos.
@KingdomDTF3 жыл бұрын
Intenta usar un % de tinta mas bajo. Tambien un icc profile ayudaria a que los colores sean mejor pero nuncan seran 100% igual lo que tu vez en pantalla.
@xkingtito74x802 жыл бұрын
You Have videos how to convert Epson xp 15000 to dtf
@KingdomDTF2 жыл бұрын
No, you can search youtube and many video will come up.
@AmericanWithTheTruth3 жыл бұрын
I have a p400 in my closet not bring used. I want to try DTF for first time. I only do screen printing right now. Is p400 worth it to convert?
@kvnggatti53942 жыл бұрын
I would buy it off you if you plan on ever selling
@susanireland31612 жыл бұрын
If I get an Epson XP 15000... what program do I print with?
@KingdomDTF2 жыл бұрын
You can use Cadlink DF 10 or Acrorip. You can see here kingdomdtf.com/collections/software
@areej43063 жыл бұрын
Hi Jose, I'm having problems with my Epson L1800 where, after having not cleaned it for 2 weeks, it wasn't printing and the nozzle checks were all really bad as you can imagine. Having spent hours unclogging all the nozzles, cleaning the printhead with cleaning solution and sucking up any water-like ink from each cartridge with a syringe, the printer is now printing in magenta only, with lines in between any design. I was wondering if you had any suggestions as to why this might be or what to do. Could the ink pipes themselves be blocked? I will be replacing the data cable to see if that helps. If not I will replace the printhead. But just wondering if there's anything else I should try? Or why this might be happening? Thanks in advance
@KingdomDTF3 жыл бұрын
The lines may be clog too after that long. Try to flush with a little solution and distilled water, maybe that solve the problem, if not it could be the print head clog very bad after 2 weeks without maintenance.
@areej43063 жыл бұрын
@@KingdomDTF Many thanks for your fast reply - when you say flush do you mean do a power ink flush? Which replaces all the old ink with new ink? And could the printhead still be clogged even after the solution ran completely clear after I tried to unclog every single nozzle? I thought it's unclogged because the solution ran clear after I spent many hours unclogging with a syringe...
@areej43063 жыл бұрын
Hi again, Having tried the power ink flush with the cleaning solution it didn't work. I rang Epson customer service who said I should try it again but that they don't recommend to use the cleaning solution and instead use normal ink. They also said you can't replace the printhead with just any printhead and need one that has the same code and need to find out the software that the specific printhead needs. Any ideas on this?
@annacoronado13382 жыл бұрын
Can we use acrorip with xp 15000?
@KingdomDTF2 жыл бұрын
Yes, recommended 10.5
@Carlos-ru4zt2 жыл бұрын
What’s the difference with matte and glossy film ?
@KingdomDTF2 жыл бұрын
At least when I talk about matte or glossy is the film is double side or single side. Matte is double side that is fit better on desktop printer when using sheets, still have one side coated. Glossy is one side coated and the back is pure glossy and some printers can not fit easy, but the glossy is better looking for a customer because it shine.
@Carlos-ru4zt2 жыл бұрын
@@KingdomDTF I’ll be ordering a 24 inch dtf set up
@marielab87742 жыл бұрын
Do I need a SPECIAL printer for DTF PRINTING????
@KingdomDTF2 жыл бұрын
Yes, a DTF printer or a desktop converted printer to do DTF. You can see what printers you can convert here kingdomdtf.com/pages/supported-printers-for-dtf
@1stclass9373 жыл бұрын
Hey I bought my L1800 and all my supplies from you guys but now that I'm trying to order some more powder it says you don't ship to Ohio
@KingdomDTF3 жыл бұрын
We all good now. Some items where out of stock and is going to say that.
@hanzjerichogarabiles51982 жыл бұрын
My L1800 always have white ink issue (not printing, too thin) It's like everyday I need to do something just so white ink will print. Is that common to all L1800 printer?
@KingdomDTF2 жыл бұрын
Yes, white ink needs every day to be shake to get mixed well again. I recommend to rotate the inks, just shake before start printing, then pull ink with a syringe and back to tank. That help to mix all.
@MoThingsEmpire3 жыл бұрын
Does this make good photo films ….You know is if customers want a picture of them selves or other on a shirt
@KingdomDTF3 жыл бұрын
Yes, most printers so far can print a picture.
@dicknastee16522 жыл бұрын
Are dtf inks eco solvent or water base?
@KingdomDTF2 жыл бұрын
water base
@delroyvalentine2 жыл бұрын
How much do you sell a dtf printer for I live in Toronto Canada
@KingdomDTF2 жыл бұрын
We have different prices and shipping options.
@GabrielHernandez-tz8uh3 жыл бұрын
Hey buddy I'm having issues with my L1800 it's not printing in the middle of have the arcorip 9.03
@KingdomDTF3 жыл бұрын
In the middle? please specify more.
@socaservices7138 Жыл бұрын
Papi tienes que hacer uno en español jajajaja
@KingdomDTF Жыл бұрын
Intentaré
@dicknastee16522 жыл бұрын
DTF and Sublimation are totally different ink systems. Can’t compare.
@KingdomDTF2 жыл бұрын
They are different if compared for the application each one has. DTF can be pressed on many garments vs sublimation just poly.