Epson P600 Printer Conversion to DTF (Direct To Film)

[@tooncasual]

Thank you for taking the time to help others. This is priceless. So helpful!

[@jasonrenner5539]

Hey I have an Epson p600, I have some questions about it. Is there any way I can get in contact with you, I'd really appreciate it.

[@fadeawayproject3166]

Yeah you can email at [e-mail]

[@TheDmf1979]

Converting my p600 while watching this ..very easy up to now 🥰

[@DavidMan91]

hello, great video, thanks for the treat on the trolley track! I see that you have kept the system pressurized ... have you tried the ciss system with dx7 dumper? Sorry for my english

[@BladeCornGaming]

hello can u please tell me how to install TDF inks on new P600 and after proccess ?

[@MKMK-ju4ve]

Hello Have you one catridge install fix with cleaning fluid?

[@dirtyrichesproduction1890]

Would this be the same for the p400

[@xvaladezx]

Hello, thank you for the video. Would you know the size for the Y connector and hose? Thank you.

[@fadeawayproject3166]

For the Y Tip Connector for the waste tank i use 3mm inner and 5mm outer. Very thick but works great with no issues. you can do smaller as well.

[@Ayfey]

Hello my friend I would have liked to know where you bought his little pads for the print head good day

[@DjSykey]

Don't you got to download a rip software? Is there a way to do it without the rip software to be able to put white ink? Please let me know

[@cyberspider78910]

Which epson print head is used in this printer. It would be kind of you to share please.

[@fadeawayproject3166]

The DX7 print head on the Epson R3000 and Epson P600.

[@macinons]

Great video! are you able to do the same installing Eco solvent inks?

[@fadeawayproject3166]

Unfortunately eco solvent ink is different and not normally used on Desktop Dtf Printers. The eco solvent inks are mainly used for other purposes. I have heard of people using UV inks on these printers to print on hard surfaces but never tested myself and can only image being more complex as well.

[@pressonnatty2677]

@@fadeawayproject3166 They now have WATER BASED ECO SOLVENT INKS for epson printers, it will work with p600, as with all setups there is maintenance if you don't print everyday.

[@fadeawayproject3166]

@@pressonnatty2677 do you have more information on the inks by chance? This is very interesting, do you know how are they being used the film type for the Epson p600?

[@NashvilleCustomApparel]

Great video! Did you remove all rollers? Including rollers on end?

[@mbraddy24245]

can this be done the same way for the p800

[@MaryStremmel]

I ordered a XP-970 and then ordered a ciss tank system for that printer. I'm curious though about your waste tank redirect... can't you just remove the empty tank and use a chip resetter instead of getting new keys?

[@fadeawayproject3166]

So the best part about the Epson P600 is we wouldn't have to use a chip resetter, we use a Firmware bypass so the printer thinks the ink is always full. So keeping that in mind the waste tank is separate and having to tell the printer that it's not always full by using a key resetter for the waste tank/ ink pad to out perform its current factory settings/ setup. Hope that helps. Don't forget to subscribe. 🙂 thank you.

[@taylorpatterson8232]

Hello! Is this the same with a P400? Does it bypass it or do you need to do a chip reset?

[@PassionPainNDemonsStreetwear]

Did you say you have to buy a key every time you run a clean?? How much are the Keys? Also what type of ink are you using for the dtf prints? Plastisol ink? DuPont ink?

[@Marc-io6pv]

You buy a key every time the printer thinks it's full of waste ink. Depends on use and the amount of cleans you do. It's ink similar to DTG ink. Some seem to just use the same interchangeably.

[@HildaS22]

I just picked up a p600 for $20. The previous owner said it has a problem reading one of the inks so I’ll be trying to fix that first. But I’d be interested to know if you’re still using your p600 and is there anything I should be aware of when converting this model for dtf. I haven’t started dtf cuz I’m saving for the Acro rip program. I also have an r1900 that hasn’t been converted yet but has a clean printhead. Anywho I thank you for this video.

[@Bluntedco.]

cool! i have a p800 and i get head strikes by just printing reg photos not even dtf yet. so adding some type of foam behind that fixes the problem?

[@fadeawayproject3166]

It has definitely helped with head strikes, can't say it will fix it but it has worked for me and my printers have been printing great.

[@dika7210]

Hi thanks for video. Whats the size of tubing you use ?

[@fadeawayproject3166]

I believe the one I used in this video is the Silicone Tube 3mm /0.12" ID x 5mm/0.2"OD 3.3' Flexible Silicone Rubber Tubing. With 3mm / 5mm Y-Type 3 way hose plastic connector.

[@dika7210]

@@fadeawayproject3166 great.. thank you very much

[@iam2370]

Hi, I came across your video, I have p400 and there aren't many videos made for p400. Do you by any chance know the difference between the two and would it work in the same way? Thanks.

[@fadeawayproject3166]

Unfortunately the P400 is not compatible.

[@ISTSystemsInc]

I don't agree with that. The surecolor p400 is compatible, for DTF and DyeSub, you can buy arc ciss , with white ink stirrer, or arc empty cartridges , install chip less and print away. If you meant the Waste Ink Tank. That's not a huge big deal. Whats impressive on his video is . The wheels assembly is easy to take out

[@tomcollick8111]

Where can I buy sets of empty cartriges for the P700?

[@Marc-io6pv]

Not been cracked yet.

[@ibrolishcustoms609]

First of all thanks for the infos, I would like to ask you, have you changed the original epson dampers the printer came with? and do you have any idea how to use white ink circulation system for the epson P600/ R3000?

[@ayazpat]

Hello. Very good video for converting to DTF here till now I was seeing for L1800 printer and the job for converting is little tough as a complete printer must be open. But P600 is simple job. But as you mentioned to buy ink pad tool with key, my question is did the Epson give or sell the software. Pls give reply.

[@joanneescano5075]

Is it the same for the p700 to remove the rollers?

[@Marc-io6pv]

But you'd have to have refillable or CISS carts for the P700. Are they out yet?

[@charlottesweb6992]

Hello Did you use the foam pads in a P800 printer? Where did you get the foam pads? We are converting a P800 my husband removed all of the pizza wheels will that cause a problem with the film feeding correctly? Thanks

[@bartinabisi76]

Thank you, helpful 😊😊

[@lilremy3]

What the ink cartridge pattern, in what order does the ink cartridges go?

[@taehanlee4198]

Bro thank you so much for the informative videos!! and have some questions, WIC RESET TOOL have to have? i will buy the 2manual`s ones, if do these 2, I will have 2 keys?? or just use the program from WIC? and we will do the waste bottle for the printer with tips. and DTF pet film, single frosted side is cold peeling? or Double single no matter, just depends on pet film type? cuz we want warm peeling instead of cold, I ordered both but they don`t mention any info on the pet film. And where I can get the ink charge program? epson? thanks in advance!! ;) Could you make more videos with p800 and p600, please?

[@Marc-io6pv]

I think the keys are one time use. Can't help you with the film types as I'd like to know myself but imagine just go off the sellers listing. One thing I think you should also add as I've just heard about it myself, is getting chipless firmare key. This will make the printer always 100% ink and not have to reset half way through printing which can be tiresome after a while keep pulling the carts one by one for them to reset if you have the auto reset carts.

[@taehanlee4198]

@@Marc-io6pv thanks 🙏 I will do chipless already bought and ready to convert just bit not sure about WIC, with bottle method will not make reset for the epson wic itself or will happen? Thanks in advance ;)

[@Marc-io6pv]

@@taehanlee4198 Ink counters... You just wait for it to get full up and then use the reset key. You can check for free the ink waste counters on WIC. No point resetting them at like 45% huh. I've just put the printer potty into mine, have a ink pad reset key ready for when needed. Having a problem with chipless. It seems my P600 board is newer so I can use the 19.99 firmware chipless key. I have to get the 50 USD one. On the WIC program see if yours have the option for chipless carts as one of the tabs. If it does you can use the 19.99 one. If not it's chipless solutions 50 dollar version ://

[@Marc-io6pv]

@@taehanlee4198 Read it again, bottle method I thought you meant the waste but do you mean CISS? If so and they'll have auto reset chips on the cartridges then I wouldn't bother going with chipless firmware. I have two Epson p600s and one I will use refillable small cartridges and go chipless. The other I'll just use CISS and see which I prefer.

[@taehanlee4198]

@@Marc-io6pv Thanks for your reply, I purchased p800 chipless and I’m try to remove the pizza roller but I can’t see those:( it’s different with p600 thought it’s same. I haven’t yet purchase WIC RESETTING yet my tank still on 25% so should do later? Do we have to use the cleaning solution at the first print? Cuz mine still on the way and I have most of set up, ink refillable cartridges, film powder heatpress, acrorip 10 Except cleaning solution and converting. Do you have any idea of pizza roller and the cleaning solution? Should i just try? Thanks Update, I’ve found the pizza roller and it’s bit hard to taken out, have to break the roller holding parts and bend a bit because of I pushing it same time pull the aluminium part but looks ok, and chipless works, now need to wait for the cleaning solution to clean up. Any idea for without cleaning solution?

[@danielnamyun7257]

I can converter the new one? P704?

[@ashleygault7329]

Where did u find the ink cartridges?

[@inoueyoshio1221]

Hi, I just want to remove the P600's PizzaWheel parts, is it possible to remove only the places where those marks appear? It's the middle part (about 6 inches wide) on letter size. Are there any errors displayed during the removal process?

[@cuttingupwitsoda7528]

Hello liked the video... do you still use this dtf printer??? If so how has it maintained? And does the program you used come with the printer??? And where do you get your cleaning solution and inks from???

[@fadeawayproject3166]

Yes we use the DTF Desktop Printers Daily. Best decision we made. We are a supplier and sell our supplies. [e-mail] if you are intrested in supplies. Thanks don't forget to subscribe.

[@leviteapparel]

cool info bro.

[@ozi7659]

Do I need to buy new cartridges for my new P706 for DTF?

[@tisprintcraftstv]

Please I have not seen anybody converting Epson SC p900 to dtf. Is it that it can't be used for dtf or what?

[@MKMK-ju4ve]

Where do i get this software?

[@rafalwaszkowiak6165]

Hi can someone help mee out pls ? I have converteren to dtf but mee colors are no maching the printhead when need come blue then come black when red yellow 😢how solve this …

[@josephchadwick9202]

Would the conversation for a P400 be the same?

[@fadeawayproject3166]

Yes process should be the same

[@srdesigneredition6407]

And where can I get the ciss for this printer?

[@smokedog7730]

What RIP are you using with the SC-P600?

[@fadeawayproject3166]

Currently using the AcroRip V10.2 For printing Roll feed.

[@gasawayelizabeth9683]

Great video can the p700 be converted in same way as your p600?

[@fadeawayproject3166]

Unfortunately the P700 can not be converted.

[@gasawayelizabeth9683]

@@fadeawayproject3166 🙏🏽

[@hugofresan]

We just ordered a P800 to convert, what's should we do different?

[@fadeawayproject3166]

Process should be the same, run tubing to waist tank/bottle.

[@srdesigneredition6407]

Great video! I’m getting smearing on mines time I print my image what is causing that

[@Martinehz]

Pretty sure u need a board since when the paper comes out it’s bends down and it’ll touch the roof of the printer when coming out

[@srdesigneredition6407]

@@Martinehz is your p600 still working well and do it need a chip resetter?

[@jessalvarez3344]

Is this okay with eco solvent inks??

[@SupremeODMG]

Hello serious question, could you sell us one set up already? We are curious about DTF. Thank you.

[@fadeawayproject3166]

We have one available, and ready.

[@SupremeODMG]

@@fadeawayproject3166 Can you email [e-mail] ~ Mike

[@gelodagr8]

I'm also interested in buying one already set up. Can you contact me at [e-mail].

[@tommypetersen5112]

Hi what is the red liquid you have standing on the table?

[@fadeawayproject3166]

It is a Cleaning Solution that i use for wet capping the print head.

[@AmericanWithTheTruth]

Will this same process work on a p400?

[@fadeawayproject3166]

Should be very similar but pretty much the same for P400 and P800

[@chittlingwhittles1198]

Thanks for this! I’ve subscribed. What is that other printer and have you done a 2880? Thanks

[@fadeawayproject3166]

I haven't done the 2880 unfortunately.

[@DTFMASTERS]

Have you had trouble with the red line flushing on p600?

[@fadeawayproject3166]

No it has been a great product that I get from dtgprinterparts.

[@DTFMASTERS]

@@fadeawayproject3166 sorry I meant when first flushing the old ink out, two of my p600 when I was converting the red color took forever to flush

[@fadeawayproject3166]

@@DTFMASTERS you will have to check your capping station, make sure when you flush it actually is sucking the ink through the capping station. Separate your waste tank lines to see the white ink and color ink Charge.

[@DTFMASTERS]

@@fadeawayproject3166 will do thank you!

[@DTFMASTERS]

Took everything apart the issue is the damper is very clogged, gotta get a new one

[@ctrosclair99]

How you convert a new epson p600 to dtf

[@MichaelBentum]

How many minutes for an average A3 print?

[@fadeawayproject3166]

Under 5 minutes for a full printed sheet full color.

[@Free76Thinker]

Very useful video, thank you for making it. I have plans to stop using my white toner printer and do a Epson DTF cnversion. Can you tell me what RIP software you use and are there more than one option for RIP?

[@fadeawayproject3166]

That's great, watch my other videos I have on this channel and subscribe. The current RIP Software I use is AcroRip 10.2 it's amazing and does a great job at outputting quality work.

[@thilaanmendis4771]

Hey could I possibly talk to you?

[@alfredosmith6107]

P800 shouldn’t be too much of a difference

[@stuartcotterill9475]

Your website does not work.

[@MaryStremmel]

it says coming soon... but really not soon enough

[@jessalvarez3344]

Is this okay with eco solvent inks??

[@stormmayluvzyu]

Would this work for the 6000?