Dual ARB AIR Compressor - CUSTOM ON BOARD AIR SYSTEM PART 2

[@AntonioClaudioMichael]

Rotopack setup is sweet love the Air connect under the tail light

[@AntonioClaudioMichael]

I own a bunch of 4runners and fords But I'm subbing because your cool and great videos

[@AntonioClaudioMichael]

Just got all arb accessories for the dual compressors and tank for my v8 4th gen 4runner

[@AntonioClaudioMichael]

Love the old school Fighter planes shark mouth was on fighter planes and Bombs looks cool as heck

[@AntonioClaudioMichael]

That Jaco guage is sweet

[@j1mmyr1chter]

Totally elegant solution with the license plate delete plate. Worked beautifully for me as well. Love that you can use that solution to make your OBA seem completely custom, without having to cut up the Jeep. Many thanks for sharing your experiences here for all of us saps who cant come up with their own ideas.

[@TMogo116]

j1mmyr1chter that’s why I made the video man glad it worked out! I put two bolts with nuts on the back through the pic plate delete to keep it more secure I’m really happy with the way it came out

[@jamesrichter8386]

T Mogo116 I was even more lucky. My tag delete plate was steel and screwed on. Originally had a bottle opener attached, so I had to lose that. Honestly never used it anyway, so no big loss.

[@TMogo116]

AHHH The JCR One I was going to order that one! But no one could tell me if the bottle opener was riveted on I didnt want to have to drill it out. plus the jeep comes with 5 bottle openers anyway lol open the door and use the latch hook

[@jamesrichter8386]

You got it. Bottle opener was a separate piece; just gets locked down with the install screws for the cover plate. I just had to take that piece off and drill out the plate. Worked great. Have a good one man!

[@knuddreeen2276]

love the idea with the tiger shark mouth bomb - look 👍

[@TBizzell68]

That is one clean install! I’m going to look into those cubbies, thanks for the video!,

[@MrJoseluisvideo]

Where can I buy the air chuck it looks ,really nice and clean

[@jeffwisecarver]

Is that blue plastic line rated for a high pressure air compressor? Looks more like a water drain line or something...

[@TMogo116]

JEFF WISECARVER it was actually a high pressure line I bought it at Lowe’s or homedepot forgot which but it was rated for way more than what the compressor made

[@toddgibbs1321]

The quick disconnect is awesome!

[@TMogo116]

Todd Gibbs thank you!

[@BigBlueMoose73]

Show us a pic of your set up with the manafold

[@jbsbayarea1]

that looks awesome , think it would look better if it had the elbow brass fitting L on each side so the blue tube is hidden. I think that will give a cleaner look.

[@TMogo116]

This is true! I was trying to find 90s but never did

[@FireoftheGreeks]

Why didn't you mount the tank to the bottom of the lid and hide it in the "storage" bin you installed? It looks like it would fit in there with maybe a minor amount of work.

[@randychamberlain6350]

What size barb did u use to connect the tube to the tank?

[@lordsammich8252]

What do they call those bags you have mounted to the back drop down table ?

[@jeffzenoniani8686]

What size line did you run? 3/8”?

[@steved7633]

I see this video is almost 3 years old. T Mogo, how is the compressor and tank holding up? did you see any decrease in time filling your tires up with the tank vs the compressor? thanks Steve.

[@taraaaron1242]

Your jeep rocks.

[@TMogo116]

Aaron T thank you

[@Hunt904]

I like the set up pretty rad but not sure how I like the hoses just out there, maybe put a 90* so that they come in from the bottom if that makes sense, and I’m in Fl so we get loads of moister in our air, how are you going to drain your tank over time ? I know it’s aluminum so it won’t rust but still

[@TMogo116]

Adam Hunt I am in west palm 👍🏻 the amount that this gets used my not too worried about the moisture build up but it’s all bolted in I suppose I could unbolt it to drain the tank

[@iamnoone5248]

Do you just run the air compressors on without a cut off switch to the tank? Or is there like a cut off switch at the arb compressors?

[@TMogo116]

The compressors themselves have a cut off I aalso plumbed an emergency one on the tank as well.

[@davidkay7389]

Nice utilization of both sides in the back with the springtails.

[@TMogo116]

Thanks a few friends mentioned why not run the tank under the jeep, this will keep it away from the rocks and it was unused space anyway.

[@071753]

Why did you use a quick disconnect to connect to your ARB quick disconnect?

[@TMogo116]

The ARB tank does not have a release outlet I figured to blow out any moisture or if I need to remove it would be easier.

[@xbpbat21x]

Still got the system? Have you run any tools off of it?

[@jcjl7052]

Awesome set up man....clean install. cheers!

[@TMogo116]

Thank you!

[@Fritochiprt32221]

Any follow up information, now that you have it installed awhile? I am thinking of loosely following your install

[@TMogo116]

Scott Mcphee I will do a brief overview tomorrow I am going to install a rockhard roll cage tomorrow and I’ll touch on it. I love everything about it but I have to redo the outlet in the back a car was busted the clip that holds it in place

[@Fritochiprt32221]

Sweet! I look forward to seeing it.

[@garretr4488]

How do you go about draining the water out of that air tank?

[@herbiesnerd]

Put two 90° elbow fittings pointed down for both ends of the tank to clean it up.

[@TMogo116]

herbiesnerd so in later videos I added a manifold to the tank I was going to do the 90’s but didn’t because I didn’t want to kink the lines

[@herbiesnerd]

I’d like to see the manifold. Which video of yours is it in?

[@TMogo116]

@@herbiesnerd check the air horn video should be in there!

[@herbiesnerd]

T Mogo116 cool thanks!

[@averagerider92]

Any issues with water and deteriorating the tank?

[@randallwheaton266]

Love the setup! I just ordered the arb twin compressor and I already have the Klein train horn kit but I am looking to add in a 2-2.5 gallon reserve air tank. My question is that on your setup when you added the tank did you just run a line straight to the tank from the compressor? Did you need anything else like pressure switch and or any other items? Also looking to hook it up to a 6 switch panel similar to the one you have did you have any problems with it or are you satisfied or would have done something different? Any info would be greatly appreciated.

[@chevy-anda-jeep]

T mogo116 has the line dusted on you but the ARB compressor? I have done the same setup as you minus the tank and I keep blowing the line.

[@TMogo116]

Oscar Romero I did not, the line exceeds the psi rating of the arb though I would double check the air hose you are using, also the tank has an emergency release on mine but it has never gone off

[@chrisraistrick5355]

miss the jeep videos! would like to do something like this but curious about external air hookup on license plate delete would hold up in area with winters? or would be better to keep quick disconnect inside? what are you thoughts thanks

[@TMogo116]

So I did not have any issues down here but was always worried about sand and stuff getting in there, so I had bought a rubber cap that fit right over it so no debris got in and wouldnt be fully exposed it worked fine

[@chrisraistrick5355]

@@TMogo116 thanks for the input does arb make that rubber cap? if not where did you find it

[@kdodd8447]

Nice job on the video and I like the set up.

[@TMogo116]

kurt dodd thank you!

[@therealestmomo]

Is there a way to mount those side racks so that they don't have to be completely removed everytime i want to remove the whole hardtop? they look like they bolt down where the hardtop would.

[@TMogo116]

That is a good question I didnt think of, I would try mounting the hardtop right on top of them they arent too thick and just tighten the hard top right on top of them, the hardtop extends down past the soft top channel anyway I dont see anything leaking from there and you still tighten the rest as normal

[@brianhummel8659]

They use the factory bolt locations, but nothing says you cant use flush mount screws, make your own MPac to Tub attachment, weld, rivets....get creative!

[@yazanh5257]

Nice work,,, may I know from where you bought the Sprint Tail rear cargo unit which you used for the air tank? I have searched but couldn't find it, I would appreciate it if you share the website

[@APEX_EVERY_CORNER]

wont that plastic cover just break off as soon as you hook a hose on it pull the hose around

[@TMogo116]

no I used two small bolts and washers and nuts on the inside its really a great anchor point

[@TMogo116]

@@jon_bobs_woodworking ok so where the plastic license plate cover clips into the body, cut off the clips and drill out two small holes, I used some stainless bolts small enough to fit though the square holes on the quarter and some lock washers and nuts to secure the plastic to the tub better so it wouldnt move in or out, for the quick disconnect its a combination use the a rb quick disconnect going through the plastic and lock it onto another quick disconnect. It sounds weird but I used the arb disconnect outside, sandwhiched the plastic lic plate hole cover and then another disconnect behind it that fit though the hole in the tub. Then ran the airline with the normal end on it right to the second disconnect. Get me?

[@rogelioavila6221]

So from what I see I can connect my dual ARB compressor to a one gallon or two gallon tank without worrying that it can blow up when the tank is fully filled because the compressor would automatically shut off right?

[@TMogo116]

Correct tank shuts off and I think the plastic lines would blow before the tank would

[@rogelioavila6221]

T Mogo116 thanks!! Appreciate the feedback!

[@brianhummel8659]

Thanks for vid. I have some ideas and this helped. I plan on getting a Power Tank too. I have a weird question/observation though. Surprised you used tube from HD, why not ARB straight? The pressure difference between the two would not let me sleep. Also, have you had any problems with people, dogs, gear, etc falling or pinching the run under the carpet?

[@TMogo116]

It was just what I had available the arb hose would not fit through the hole I had

[@vincentrogers1853]

ON board water supply tanks and pumps hot running water

[@hubmd6386]

Brother, how many inches is your lift, what suspension brand did you use and what are the size of your tires?

[@TMogo116]

HUB MD check my other vids! I have a 4” pro comp stage 2 lift with Fox shocks with the reservoirs, the tires are nitto trailgrapplers 35x12.5 r18

[@Jasonswenk]

Killer dude. Where did you get the ejection sticker on the front seat recline

[@TMogo116]

Jason Swenk I don’t remember exactly it was either amazon or eBay

[@kevinhurley9001]

Awesome setup bud 👍👍

[@moneyslashdub]

hey! very nice! what size is that rotopack?

[@TMogo116]

3 gal

[@moneyslashdub]

thanks! you did a cool job on this one.

[@erykcenteno2838]

Do they make those mounts for the JL.?. I want some for mine

[@jxd1138]

another great vid! cool set up!

[@moneyslashdub]

any luck with finding a dust plug for hose inlet?

[@TMogo116]

b. webster not yet actually bought a half inch one but it was too big but so far I have been power washing it and it’s been fine

[@johncortese745]

Does that M-Pac cubby work with a hardtop?

[@TMogo116]

yep you would bolt it right through the top

[@itsrobbyjames]

Super dope set up

[@TMogo116]

Robert Garica thanks man

[@danpro62]

Love your air setup. Thinking of doing the same with my rig. Question, where did you buy the plastic plate that's just below the tail light?

[@TMogo116]

NYTRO it is a license plate delete you can get them on amazon or on sites like quadratec a lot of companies make them

[@batty505]

Where’s the tank pressure release valve?

[@TMogo116]

batty505 there isn’t one I didn’t think it was really needed on a 1 gal tank which is rarely used

[@cjohnson83108]

Will the air compressor shut off automatically when the tank is full?

[@TMogo116]

yes the compressor itself has a auto shut off.

[@alainbrouillette7740]

Who is supplying this air connector that you installed at the back ?

[@TMogo116]

Alain Brouillette it’s a standard connection I bought at Home Depot

[@alainbrouillette7740]

Thanks

[@BMPradoadventures]

Do you need to install a 1 way valve when you install an air tank ?

[@TMogo116]

Na, the pressure will go to the easiest path

[@xXReaperzZzZpwnXx]

If you're anywhere near Jacksonville I would love to to this to my jeep

[@TMogo116]

Jared J I️ am down in West Palm Beach but I’ll put a list together of everything I️ used and post it in the description tomorrow

[@xXReaperzZzZpwnXx]

T Mogo116 awesome I think this is such a great idea I'm gonna see if I can kinda do this budget wise as well #collegekidlife

[@paintballer7171986]

Dont put gas in passanger compartment. If it releses fumes thats a major fire hazard, not smart.

[@MrPaddy1000111]

To be fair, a fuel tank shouldn't leak any vapours unless it's faulty. If its hot enough inside the car to melt the plastic container then your probably on fire anyway so you have more to worry about. A lot of cars have plastic fuel tanks and the fuel pump is accessible under the rear passenger seat and it's never been a problem before. If you mount them externally then people can steal them, steal from them or worst case, make a hole in them and torch the vehicle. Also if you roll the car with fuel tanks on the outside you can crush them easily and they burst leaving 10-25L of fuel over the outside of the vehicle. Let alone if you have a crash. That, plus a hot enough exhaust or a spark from a winch motor or starter motor and your going to have a bad day. A good quality fuel tank mounted securely inside the vehicle is a much safer option.

[@familytraditiontransportat7951]

Patric except what you're forgetting is that as gas heats up in a sealed container, it creates pressure. Which is why a vehicle's fuel tank is vented to the outside... Yes a new car has a fuel tank mounted on the underside and you do access the pump from under the rear seat on some, none however are actually inside the passenger compartment. None vent the fumes (which are the more flammable part of gasoline BTW) to the inside of your ride. Jerry cans go on the outside...

[@TMogo116]

I didn’t see this before! Excellent advice I put it on there then realized it wouldn’t be best I am looking to mount it to my spare tire location! Thank you

[@brianhummel8659]

I had to put my Roto Fuel in my Jeep because I ripped out one of the mounts trailing. I forgot about it for a few days and you will notice the smell, not to mention safety.

[@physicalstarfighter2131]

@@MrPaddy1000111 I have rotopax fuel tanks and there not reliable enough to keep inside the vehicle there's no way I would keep mine inside and as far as fuel tanks on cars being mounted under the back seats there still on the outside of the vehicle so that dosen't apply

[@jaxgsxr]

Totally AWESOME set-up, man!! I love this. Gives me great ideas that no doubt my wife will love (really hate because it's more money spent!).

[@TMogo116]

haha I am in the same boat!

[@310to703]

Sweeeeeet very clean man

[@TMogo116]

thank you!

[@sparky2447]

How come you didn’t run a pressure switch or pressure relief valve?

[@TMogo116]

Drone Guy pressure switch is built into the dual arb it sits between the two compressors under the cover. Pressure relief was not needed as the compressor shuts off at 190 when not airing up tires the compressor is off

[@paulwesson961]

But do u not require a one way valve to keep the air in the tanks and not feed back into the compressor ?

[@timritchieblue]

Link Video for air filler?

[@TMogo116]

I actually have not made one yet lol

[@andrewwolfe8742]

I love this. I need something like this for my Jeep where I go. I don't know if I'm missing but where are you mounting the license plate? I love the outer quick release. This looks so handy.

[@TMogo116]

Andrew Wolfe I have the license plate on the tire carrier

[@cipher951]

Another great video. I have never seen those MPacs(?). Those things look awesome.

[@TMogo116]

Yea Check em out they are awesome!

[@mpope10]

Does this m pac system work for the 2 door jk I looked on the web site and it just says jeep unlimited?

[@TMogo116]

M Pope I️ know the drop down tailgate does I️ don’t think he side cubby’s will

[@mpope10]

T Mogo116 well that sucks I like the system you have looks clean.

[@Horserider1913]

Do that storage MPac work with a hard top?

[@TMogo116]

Katie Quinn yes they do

[@lawrenceschifko9594]

Great vid and awesome set up. You are right, If you have a Jeep why are you not subscribed? Continue with content like this and your subs will soar!

[@TMogo116]

Thanks man I appreciate that!

[@tropiccalibackyardgardener6241]

Dude I love your setup it is awesome. Wanna do mine? lol you should make a video run down on what it would cost someone to do that exact setup

[@TMogo116]

Brandon Crider so it’s not much the compressor is the big ticket item then the quick disconnect is like 20 bucks the line was like 25 then the couplers and fittings maybe another 20 and the license plate delete cover.

[@TriggerHapySheep]

That's actually a really awesome storage setup my dude! Do those racks work with 07-11? I've got a 10' and would love those!

[@TMogo116]

TriggerHapySheep yea man the instructions showed they would work with all years checkout springtailsolutions.com

[@physicalstarfighter2131]

Relax a little take a chill pill lol. To much crap under the hood blocks air flow to the engine...you need circulation under there for cooling not to mention the fact that the air compressor is going to get really hot under there and it's got a lot of plastic on it look how easily you cracked that connection lol . I do like where you mounted the air connector for external air hook up and moving the license plate that was good. Oh ya and why is it so important to you to tell everyone how you got the air gauge for free what's that all about "full disclosure" lol

[@TMogo116]

??