Dual Weber 34 ICT Tuning

[@everettplummer9725]

Weber carbs were on the Fiat Bertone X1/9. 75 hp. Could pick up one side and flip it, small tight car.

[@AndersVestlund]

Wow, a calm and really explaining video. Fantastic work! Following 👍🏻

[@charlieh9128]

Very Happy that I found you and this video! I got a brand-new set of these ICT 34's and are on my stock 1600 Bug engine (same cc's as yours). Less than 700 miles on them and a rebuilt engine. I paid to have the carbs "preset" at the dealership when I purchased them, and sought out professional help with the initial setting of the adjustment screws. Just recently I had to remove the carbs to do other work (one being to add Weber windows for easier access). (Also an issue with proper crankcase ventilation, but that too is another story). Long winded here ... wanted to tell you that this video will help me tremendously in getting the mixture and idle screws properly reset along with reminding me to reset the crossbar and accompanying linkages. Sooo..thank you for assisting me in getting back of the road ... wanting to achieve this tune-up myself! Charlie, from Oregon

[@oldmanfixingstuff3722]

Glad this helped

[@gavturner4419]

Excellent video , always been aware of the basics for setting icts , but this just goes into detail that little bit more , has confirmed my thoughts that the stock Webber jetting for the icts on a 1600 is a little on the large side and that the acc pump needed dropped a hole to lean it out on quicker throttle applications , respect for a great video

[@daveshaffer4593]

thank you for taking the time to teach!

[@doughobbs7706]

this is such a great video for these carbs/balancing twin carbs in general - many thanks

[@mijyadoc5374]

I do appreciate your work here.... thanks.

[@oldmanfixingstuff3722]

Thank you

[@SlimWizard69]

Thank you for this video ❤

[@youaintgottaliecraigqr519]

I have a 65 bug 1776 40idf. Planning on getting dual weber 34 ict.. how is your running.. recommendation?

[@oldmanfixingstuff3722]

So far, I like them. Just make sure they are jetted for your engine.

[@gordonmack9948]

I just screw in the mixture screw until the engine stumbles and screw it out to the engine run at best.