Duplicating a key on a HPC Speedex Key Machine | Mr. Locksmith™ Video

[@IkaraPentiki]

Looks easy, why can't anyone in a hardware store get this right?

[@vencentbauer]

Is the speedex a good maching for automotive keys

[@24hrMrLocksmith]

The Speedex is an ok key machine but mostly for the simple residential keys (Kiwkset, Weiser, etc.). For Regular and Automotive keys, I prefer the Framon Key Machines or for High-Security Automotive keys I use the Miricle A5 and A9s.

[@setofirons]

Great channel . I've got a question . Can you give any input on how to protect a front door with a sidelight ?

[@24hrMrLocksmith]

Double Cylinders Deadbolts are great but you can not get out in case of a fire unless you have a key. Illegal in some areas. However, I have one on my house because if they break-in via a window they can't take my stuff out via the front door. Sidelight: Lexam or the new 3M Shatterproof film is a very good product and I recommend the film be installed on any glass on the main floor.

[@setofirons]

+Mr. Locksmith thx for the reply . I'm having an impact door and sidelight installed next month . I am selecting a multi point lock system for added safety

[@setofirons]

+Mr. Locksmith absolute and by far a great channel

[@brucecoulda1596]

Doesn't matter what kind of lock I have on my front door. My apartment has one of those card board closet doors most of the time you just push on it and it opens. This building was made in the 70s it still has the nasty yellow flower wallpaper in the kitchen. I try to look mean and dangerous when I go outside so my neighbors think I'm scary lol and I'm almost always home and everyone around me knows I'm here

[@jamescc2010]

Hi, Does car key length, metal part, for example for Honda key, of a blank key has to exactly match the original key length for laser cut? A blank key length is a bit shorter but I don't think it is matter. I am kind of new to this.

[@jimu57]

does this machine use the 23 RF cutter? I am not found of the radius on the cutter. it will not make cuts that have sharp corners in the root of the profile. i had Gilray tools sharpen 2 23RF cutters. they came back with a flat instead of a radius. I was very pleased actually. I use the resharpen cutters on my small Ilco mini mite. Makes great keys. I can make an original from space and depth keys within .002". I really like the flat on the cutter. why isn't the new cutter made with a flat instead on the. .032" radius?

[@jmysgirlriddle2477]

Side Hussle

[@stephenecappssr7651]

it,s crap , junk, buy an SEC-E-9 and get it over with 2400 dollars and fully automatic SEC_E_9 and my blitz this is 24/7 locksmith service!