I don’t feel nearly as bad now at fpv! Thanks for keeping it real! Cause it’s not all that easy and I happen to wreck often too:)
@Maverick_2479 жыл бұрын
I have none of the problems you encountered mine works a charm and is crazy fast
@omaralagna92314 жыл бұрын
Hi my led lights from ODS and main control are constantly red. After replacing the main power board, I had a very minor crash at low altitude and low speed. ever since leds are red and it behive funny. meaning it turn to left or right, it depends of the day... any idea?
@TaunusTV9 жыл бұрын
Tryed out the 250 today. Flys real nice and the ascend speed is crazy ! After about 7 min. it did the "death roll"... I should have done what you did with the switch on the radio right from the start....
@DustinDunnill9 жыл бұрын
Sorry to hear about the FOD! What's the damage?
@TaunusTV9 жыл бұрын
+Patrick ta1 It dropped from about 15 meters. Onlt the props broke and one antenna was a bit bent. No damage to frame !
@DustinDunnill9 жыл бұрын
Cool! That's very minor damage for that high up.
@lukewarlock92114 жыл бұрын
I bought one like this (250 runner) around 2015 but I've only used it once after it almost drifted away 🤣. And since then I haven't tried it out till now that I found you with tips. Your right, most of the video people crash them lol. I didn't crash mine hard since it had rain the day before and I fly it on a sunflower field it soft landed. It almost happened to me like when you dropped it hard. I managed to lift it at the last fraction of a second and got scared and put it away lol.
@mulder24007 жыл бұрын
You don't need to do all that "Stuff" to keep the Flip Of Death FOD from occurring. I just adjust my Throttle Trim Tab to about 4% so it's Armed, but the Props aren't spinning. I entered TX Settings and Re-Set throttle Position Failsafe, to shut Power off if TX Signal is lost, which keeps it from flying away, ever. I Modified the Battery Bracket with 2mm Carbon Tubes, for strength, and the Upper Panel as well. I run 5045 V2 Tri Blade Props w/Nylocks (Self Tightening Props can/do Spin off in flight on Rapid deceleration), and got rid of that 41gram stock metal Run Cam, and bought a RunCam Swift, at like 12g. My Runner is lighter and stronger than stock, and scarey fast
@JulianOwens9 жыл бұрын
Great solid video. I am a newb to the hobby and ordered a cheaper one,FY326, to learn and I might really be looking at this one down the road. I liked seeing the realistic crash resilience of this model.
@DustinDunnill9 жыл бұрын
Hey Julian, The Q7 is a great start! Enjoy it. I'll be racing the Runner 250 this Sunday. Be sure to stay tuned for more video on it and how it does :)
@jamble7k9 жыл бұрын
Those crashes were kinda brutal, surprised it didn't take more damage! Nice review also, good tips.
@eatdick8159 жыл бұрын
awesome video, loved it, so helpful, it would be awesome if you could make that video on how to program the transmitter to do the buzzer and the arming sequence
@pghsteel369 жыл бұрын
Nice Review. Probably should have watched this before buying, but what fun is that lol. I too would like to see your future vid on the beeper install. Now to work on that FOD mod. Thanks again, good job.
@DustinDunnill9 жыл бұрын
It's on my list of vids to do. I still think it's a good starter FPV rtf quad.
@ShaneWymore8 жыл бұрын
Love your reviews Dustin! I also really like what you have done to the runner in your DIY vid! I'm sure you noticed some really big changes to quality of flight.
@TaunusTV9 жыл бұрын
Thanx for the review & tipps ! Gonna buy me the Walkera 250 tomorrow.
@DustinDunnill9 жыл бұрын
Cool! I think you'll enjoy it. Just take it easy if this is your first FPV quad.
@jb46889 жыл бұрын
Good review...looks like a tough little quad-can crash with minimal damage. From your review it looks as thought that it would be a good BNF quad where you use your own transmitter and your own FPV equipment, especially since many people move their FPV equipment from model-to-model as the situation warrants and although I'm not a fan of the runcam, the mobius has similar lag time...better to use the small cams for live FPV.
@DustinDunnill9 жыл бұрын
Thanks JB. I think your right great bnf and I think I will be installing that little Cam I have laying around for leat lag time. It's a light one. The stock Cam was real heavyweight but looked durable.
@markschaffer1679 жыл бұрын
Wow, I did exactly what what you said!! The first day in the first 10 minutes of flying my copter crashed just as you described. I throttle up then all the way down then back up, then CRASH!! Just like you said. I've done this same sequence to other copters I own and I had NO issues. Can you PLEASE do a video showing exactly how to make the change to the radio so we don't have the fall of death ?? Please!! I need to see how it's done. Thank you
@DustinDunnill9 жыл бұрын
Sorry to hear about your crash. There is 1 or 2 videos on KZbin showing how it's done. If I have some time I'll make one that may be a bit easier to follow.
@markschaffer1679 жыл бұрын
Dustin, that would really be helpful to me and I'm sure a lot of other people would definitely find it very helpful also. I really wish people selling the Runner 250 would warn the buyer so they don't crash, costing themselves their new copter.
@keefygee559 жыл бұрын
Good posting, Thanks. I was thinking of developing a form of radar that would steer away from blips but have decided that there is more to be had from replacement props. Kidding, both times that the tree had you it was really close, but no try, no glory. Thanks again for the reviews you do. Must take a fair bit of time.
@DustinDunnill9 жыл бұрын
Thanks. It is time consuming but I enjoy the hobby so much :). I need FPV practice that's for sure.
@keefygee559 жыл бұрын
Dustin Dunnill I couldn't enjoy FPV racing as I am paranoid about everything that would mangle my quad. Flying by FPV in the open is fine, as I can verify the position on a big screen housed in the carry case. Cheating I accept but it is protecting my investment LOL
@scorpio14589 жыл бұрын
Nice video, Never had any of your issues so they must have listened.
@nimben809 жыл бұрын
By the way the clover leaf thats provided with the RTF is left hand polarized thats why its pulsing in and out. Just put a right hand polarized and you're good to go. You might need an adapter. CHEERS!
@DustinDunnill9 жыл бұрын
Hey Willie. Really? I didn't think having different polarization would pulse completely off steady like it was at close range. I'll have to test with different antennas again.
@mulder24008 жыл бұрын
+Dustin Dunnill please Elaborate what you learn on Cloverleaf polarization, Right Handed or ?
@angelrodriguez-nw3rv8 жыл бұрын
Wow i didnt know so many people have the same problem , i hope the solution works !!
@Hoverbot1TV9 жыл бұрын
You need voltage osd info for proper racing. Frame had fibreglass middle layer too but it did do ok in the light crashes.
@DustinDunnill9 жыл бұрын
Wouldn't a low voltage beeper be ok in place of OSD voltage?
@angelrodriguez-nw3rv8 жыл бұрын
It was not defective-the side screws were too long and was making contact with the boards electronics, the solution is simple take off the stock screws and use shorter ones. I had the same problem and i just kept trouble shooting and i got lucky to figure it out.
@GrandpaJake9 жыл бұрын
Hello Dustin, great review. I have had a 250 before but it did not work so well. I was thinking on the Runner 250 as the price seems reasonable. I like the setup you have with the buzzer especially !! Not sure if you put together a video on the setup, but if you do or can do please let me know. Take care Grandpa Jake
@DustinDunnill9 жыл бұрын
Thanks Grandpa J! Haven't made a vid of it but it's on my list. There is one out but tuff to follow.
@GrandpaJake9 жыл бұрын
+Dustin Dunnill thanks again Dustin if you do get one done let me know I think I'm heading in that direction
@modshobs10149 жыл бұрын
Great in depth and thorough tutorial as usual,I see you can get a little reckless with speed and acceleration,lol.God bless bro,another great vid thanks for sharing.
@DustinDunnill9 жыл бұрын
Hey bud. Glad you enjoyed it. I do like to get speedy and I'm sure I'll pay for it ;). Thanks for sticking with me from the beginning! Hope your good.
@modshobs10149 жыл бұрын
All is well by Gods graces,you're welcome bro I learned a lot from you,appreciate the shares.You moved up quick bro,proud of you.
@DustinDunnill9 жыл бұрын
Right on S. Stay cool :)
@rane13699 жыл бұрын
Hi Dustin, great review. It sounds like the Walkera 250 is kinda buggy. Maybe they listened to your feedback and improved the design/set-up with the Walkera 250 Advanced model? Also, how is the flight time with the Walkera 250 (even with your lighter set-up)? ------I am currently looking at the advanced model and thinking of picking up three of them for a friend and his two teenage boys, but I am concerned I would just be buying them a headache based on some of the challenges you experienced in your video with the 1st gen Walkera 250. Have you looked at the newer advanced version or have you any comments about it? -------I am a newbie myself starting on a Husban x4 (big fun in a little package), but I also bought a SRD250 from Helipal and it is definitely a big boy's toy (super durable with a short flight time of 7-8 min). Helipal offers a Walkera 250 advanced RTF package where they supposedly test it prior to shipping (My SRD250 from Helipal was a RTF package and it worked great out of the box). Anyway looking for guidance on buying a small sized (250ish) RTF drone package that is not too expensive and is easy to fly and own. One thing about the Walkera 250 advanced that I liked a lot is its plug-n-fly approach to hardware components rather than having to solder wires when something breaks (like my SRD250, I'm replacing the 14awg battery leads after shearing them in a most wicked crash,lol). Any comments would be great, thanks again.
@DustinDunnill9 жыл бұрын
+rane Hi Rane, I haven't spent any time with the runner 250 advanced but I hope to review it soon. I've got to do some Mobius cam review testing so i'll do some timings on the runner when I test with and without the cam. There were some defects with mine but this is the case with all electronics. I was just unlucky but felt I had to mention it in the review vid. Yes, the modular design of the runner is neat and there are more and more coming out with this design. I'll be reviewing the spedix f250 and Emax nighthawk 280 pro shortly...then hopefully the runner advanced. I have honestly only had experience with the runner 250 in the race realm but will be expanding models and experience with them and continue to share my pros and cons :)
@hquiroz1130648 жыл бұрын
what kind of antenna are you running? I hear the stock ones are junk. great video
@DustinDunnill8 жыл бұрын
Still stock. Seems OK with no signal loss yet.
@JamesManimal Жыл бұрын
I can hardly believe this was good back in the day. and oh man are those bull nose props?
@rogercligg45317 жыл бұрын
tres bien. shall have to watch this video numerous times. as have bought a reasonable priced one on the famous e bay. only a basic 2 version though
@Darediver1007 жыл бұрын
Dustin: Did you say you found a defective on the OSD or Receiver system of this quad when you unboxed?, I´m a good pilot but not as good dealing with either fixing or fond of staying hours in front of a computer instead of flying, that´s reason why I just purchased RTF models. Do you think is this for me? I´ll thank your information. Helicopterer.
@TexasBulldog746 жыл бұрын
im a total noob when it comes to drones but not to RC Flying... you were moving some good weight changing the drone's CG which had to be causing bad habits.
Crash mine last week falling above 50m from the sky, PDB snapped & battery bend. After disassemble, thin layer of copper trace can be seen. For my advice, try not to crash too hard, PDB itself really fragile even it is protected from top plate.
@DustinDunnill9 жыл бұрын
+Hideo VT Wow, that is very high... 150ft! I'm sure almost anything would get bad damage at that high. I have only crashed from maybe 10M/30Feet so far and damage not too bad.. still flyable without repairs. Thank you for sharing though.
@hideovt62639 жыл бұрын
+Dustin Dunnill U are welcome, make sure your local hobby shop have the replacement ready just-in-case. Head over my FB to see the snapped point & new PDB shot --> facebook.com/photo.php?fbid=775213062604490&set=pcb.775213729271090&type=3&theater
@TattedTommysTv Жыл бұрын
I'm actually picking one up today brand new to very good video I was wondering can you run a hot 4s or 6s as well ?
@dennishatz64009 жыл бұрын
Hey Dustin, meant to ask....is the walkera 250 frame true carbon fiber of just looks like carbon fiber? Have read and heard that the arms break easily. Great videos...keep up the good work.
@DustinDunnill9 жыл бұрын
I think it's a Corbon/fiberglass mix not sure. Honestly haven't had any 50mph crashes into anything to really test breaking point. Just the crashes in my review and some on my crash test video as well. N broken arms yet.
@dennishatz64009 жыл бұрын
I found a review on the new walkera 250 Advanced with GPS that addressed this very issue. The Advance is true carbon fiber and the first version is fiberglass with a fake carbon fiber thin layer that looks like true carbon fiber. They claim that the older version is flexable and the Adv is rigid and more prone to break. IDK...I plan to get one or the other...for the price both are good entry level racer feames . thx again for the info.
@DustinDunnill9 жыл бұрын
Good info. I hope to have a go at the advanced some day soon :)
@tobyliebke1429 жыл бұрын
Hey, thanks for the video, assuming the hardware isn't a defect do you know if the stock fpv gear would work with FatShark teleporter goggles? And also do you know if the wakera gear will work with a Spektrum dx6i? Thanks again.
@PainJunky018 жыл бұрын
Fabulous review!!
@DustinDunnill9 жыл бұрын
+Stan Crenshaw Hey Stan. Can't reply directly for some reason. thanks... I'll make a video when I get some time on the buzzer and calibrating.
@bofroe8109 жыл бұрын
hey +Dustin nice video. i would really like to see how you installed the beeper. and are using a qaunum goggle ? and which receiver do you use on the goggles. just getting in to fpv racing quads. used to fly dji phantoms. thanks.
@DustinDunnill9 жыл бұрын
Hey Justin thanks. I'll try make a vid on beeper install when I have time. The VRX is the RC832 that comes in the quanum goggle kit and I modded goggle to fit it in top of foam.
@bofroe8109 жыл бұрын
Dustin Dunnill ok cool :-) Thanks for the quick reply. Ok so if i buy the runner 250 basic 2, the qaunum v2 and the rc832 I'm pretty good to go if i get it right haha ?
@DustinDunnill9 жыл бұрын
Yah. You'll be set. Get more props! :)
@bofroe8109 жыл бұрын
Cool thanks man ! I'll keep you posted when i have one :-) And looking forward to see more cool vids !!
@Benny718 жыл бұрын
Hi Dustin,I recently watched your review on the Eachine 250 racer now I am trying to decide between the Walkera 250 and the Eachine 250.price is very close and I was curious if you recommend one over the other.Thanks again for the great review work you do :)
@DustinDunnill8 жыл бұрын
Eachine hands down goo.gl/2c3gyx
@DustinDunnill8 жыл бұрын
More durable and less proprietary.
@Benny718 жыл бұрын
Nice,thanks :)
@keithcaht8 жыл бұрын
+Dustin Dunnill thats comes with transmitter or do i need to buy a transmitter?
@keithcaht8 жыл бұрын
+Dustin Dunnill ARF Version it means?
@bobbyjones888887 жыл бұрын
its not a fluke . I bought the walkera runner 250 pro. the fpv did not work for me either. walkera support sucks. Do you know if you can replace the camera and hook it up in the same plug as stock camera.
@jggraphx9 жыл бұрын
Great review on the 250.. I have the same thing you have but my looks nothing like yours.... I don't have that long antennas. or the to straws that the antenna runs through on my RX 710. Antennae wires are cut short like really short.. but I'm having problems on distance range... Camera works great my fat sharks are perfect on it.. Did severe bad crash over concrete been three motors broke one arm. But the thing is you can't replace just one arm you got replaced all of the front in that I did not! Like somewhat of a bad design. If you break one arm left or right back or front you have to replace the whole arms.. Can't just replace one. And that sucks. The props don't even use them or you place them as soon as possible that's what I did I'm running the GEMFAN 6045 .. Other than that the flight is great no problems.. I am new to FPV racing. Not new to UAV I have the DJI inspire one and the Walkera scout x4... I'll be in Maui in November let's FLY if we meet up 👍🏻👍🏻😀
@DustinDunnill9 жыл бұрын
Cool. Thanks for the info. I thought we could replace individual arms. I'll definitely be trying some different props soon. Give me a holler when your here and maybe we can connect.
@jggraphx9 жыл бұрын
Dustin Dunnill nice!! will do bro! ":)
@uptownaron19 жыл бұрын
Thanks a lot my man. Great review. I will be buying this product now. You are really good att what you do.
@DustinDunnill9 жыл бұрын
Glad it helped Aaron. Much appreciated!
@TheNattyChook7 жыл бұрын
i wish I could just get mine to fly ,I arm motors then they wont go past 50% throttle,any ideas ,,,great VID by the way ....
@ninjanick409 жыл бұрын
What is the biggest battery that you have put on a CX-20/Quanum Nova? How long flight time with FPV, gimbal, and camera?
@DustinDunnill9 жыл бұрын
sounds like this question should be in one of my cx20 videos :). I've put a 5100mah in it but it sticks out a little. Check my channel for a bunch of CX20 videos and mods.
@ninjanick409 жыл бұрын
+Dustin Dunnill ok thanks!!
@rtcfpv10129 жыл бұрын
Great vid and review man.
@DustinDunnill9 жыл бұрын
Thanks Ronnie!
@davemiller47308 жыл бұрын
that video cable is for buddybox
@yuzual95069 жыл бұрын
nice beast, thx for u re vids
@DustinDunnill9 жыл бұрын
+pierre mathern You bet :)
@Indy647389 жыл бұрын
thanks for your job... not quite sure I want to buy one now, I enjoy the REAL RTF that works well, like DJI stuff :D Repairing is ok, but arguing with companies or online shops to get what's not working is pretty boring...
@DustinDunnill9 жыл бұрын
I agree Lionel. The defects I encountered are a rare occurrence it seems. I am asking Gearbest and Walkera for the replacement parts which were defective and I'll let you know how they handle it.
@kentmartin48 жыл бұрын
Hi which is better for racing? Walkera Runner 250 or Eachine Racer 250 or Eachine Falcon 250? I wanted to buy a fpv quad.
@partsbenttoys8 жыл бұрын
good honest review, tks
@DustinDunnill8 жыл бұрын
+Roland c Thanks. Hope it helped Roland.
@tonytapuro92647 жыл бұрын
hey Dustin, Maui Gold box so what part off up country park where you at that park looks like a good place to learn how to fly I'm very much new to race drone just got my first one its the Eachine falcon 250 ,we're you at Kihei last Saturday they had some kind of race going I think they had the park set up with banners and all I think it was Lumenier banner first time seen it there all I know is that they fly there on Sundays
@nimben809 жыл бұрын
The same thing happened to me and most people use right handed so I changes the 250 runner to right handed
@retlas019 жыл бұрын
there is a reason for electronic speed controllers they keep it from going out of control the training cable is so you can have a master controller and a trainer connected
@mulder24008 жыл бұрын
+James Nelson You're correct james, he was mistaken the Trainer Cable is to connect two Controllers together, A Master and Newbee.
@alanlloyd10117 жыл бұрын
Aloha Have you ever plugged the FC into a computer and adjusted the PID's? Thanks for the great video I've watched it several times.😎🎮👍
@SamirAhmed2kool4u7 жыл бұрын
alan lloyd what program do you use
@rexfarell9 жыл бұрын
Would you recommend this for a total noob who lives downtown in a very crowded city?
@DustinDunnill9 жыл бұрын
Get a cheap FPV toy quad first if you haven't done FPV yet. This could be dangerous around people if your new. Check out my FPV reviews. There are some good options for training before you step up to a real race quad.
@kjellk758 жыл бұрын
do you find it easier to do flips through fpv or los? also how does this compare to the eachine racer 250? thanks for another rad review.
@DustinDunnill8 жыл бұрын
+Kjell Kittelson easier if your LOS in horizon mode but not Acro. In Acro FPV is easier. I would go for the eachine or the new walkera f210. I have also reviewed them and you can see them on my channel.
@MrMosinNagant19379 жыл бұрын
I was deciding between the runner 250 or the hobbyking black widow 260, went with the black widow. since the bottom of the frame on the runner 250 is thin and prone to bend or break.
@DustinDunnill9 жыл бұрын
Cool. Haven't seen that one yet. I'll be doubling up the bottom plate to strengthen the Runner 250.
@FRESHx913x9 жыл бұрын
had any issues yet? trying to decide between that black widow, eachine racer, or building my own.
@jholinemoore35018 жыл бұрын
hi,, I just got my walkera 250 did a test fly at 2 am i light the lights and turning sig lights, I need some help how to get my gps to work , it well not hold,, hope you can tell me what I,, can do to fex the Gps to hold, ??? thank you, I have the DEVO 7 TX cam with it , I, have ck all the thr curvs, ans did the calibration, it is to me very slow, but smooth, the punch,, is not as good as the walka 150 rodero has,, I do watch all your videos, and in joy them very much, you help me alot on my other drones, thank you,
@TattedTommysTv Жыл бұрын
Does it have turtle mode or can you set it up ? In case your not able to get to it on its back and what's the usual range on a race drone I know with my RC cars I could only go so far before it would loose signal I be scared loose signal and drone flying away lol
@michaelfisher9488 жыл бұрын
I noticed that they make a 250 advanced version, I am wondering what the improvements are ? Mike
@DustinDunnill8 жыл бұрын
The advanced version has GPS built in and they've improved on a few things but and made it look prettier but it's much more expensive.
@alanlloyd10118 жыл бұрын
+Dustin Dunnill Aloha Dustin Great review! Lots of help. I believe I read in there ad the props on the advanced have changed as well Looking forward to some good weather so I can take mine out and get my flip of death over with. I'm planning on visiting family over on Maui. would be awesome to talk story with you. 😎
@muhammadiqbalhamidi9 жыл бұрын
hy dustin dunnil, i have walkera runner 250..but first time i want to flight its. i can't move forward and backward. can u help me, what wrong about that accident??calibration or else??
@DustinDunnill9 жыл бұрын
Try the accelerometer calibration on level surface. There is a video on KZbin.
@--dh--9 жыл бұрын
Did Walkera ever fix the Flip of Death issue?
@DustinDunnill9 жыл бұрын
+awAdmin I think they did in the new "advance" version. Not sure with the old version but I would assume with new units that are manufactured they would.
@WantAdrioid7 жыл бұрын
hopefully you will review the new 250 pro??
@mumforddale19 жыл бұрын
i like your setup but with a diff cam
@Benny718 жыл бұрын
Very informative review,I am looking at the basic 2 version of this ,I plan on buying goggles later,what do you recommend for a low price but good quality goggle that works with this system.thanks :)
@DustinDunnill8 жыл бұрын
Thanks. Quanum v2 are perfect to start
@Benny718 жыл бұрын
+Dustin Dunnill excellent,thanks for the info :)
@SwFTTTT5 жыл бұрын
how did you set the throttle hold to the switch? is it in the dev7 settings or multiwii? please get back asap, thankyou
@hideovt62639 жыл бұрын
Somehow when OSD hook-up and turned on, the stock lens must not cover with anything, video will gone crazy..... not idea why it happen....
@DustinDunnill9 жыл бұрын
+Hideo VT Yes, I did test with no lens on.
@sadsausage22248 жыл бұрын
Can I use my Ipad/phone to the drone instead of FPV glasses? To see what the drone sees?
@dennishatz64009 жыл бұрын
this is the second video that pointed out a problem with the fpv as stated in this video. Hope I dont encounter the problem with mine or maybe Walkera has addressed the issue. Any body heard anything about this fpv problem out of the box? Thx.
@DustinDunnill9 жыл бұрын
Every product has it's defects. I'm sure yours will be fine. If you have an issue the vendor should honor the warranty if they want to stay in business.
@GreendeeAe1017 жыл бұрын
hello dustin! i got problem w/ my 250, how to fix the flip of death the one motor stop spinning when down stick throttle to zero, i adjust my throttle hold to 15.5% but still fallen?
@Jronesfpv9 жыл бұрын
did you try the stock cam with the lense cap off? ....
@DustinDunnill9 жыл бұрын
Yes
@VashStepler9 жыл бұрын
Hi, will I be able to change the stock receiver and use my own?
@markturner21358 жыл бұрын
Cool.😕 Dustin Thanks
@jholinemoore35017 жыл бұрын
hi, I,, do have the walkera advance, 250, and I,, use the thr hold switch for the idel up be for i take of, and to stop the motors,I do fly it FPV, and have not had acrash yet , knock on wood,:) I did put some expo in the controls, and it is a dream to fly FPV, and same for my 320 drone,:)))
@christianrosarioRC7 жыл бұрын
How do you crash yours super hard and have minimal damage but when mine lands on grass with motors off after hitting a 20 foot tree it bends the power board, im going to have to reinforce mine with 2mm carbon fiber
@getgoodnow5169 жыл бұрын
Having a real TX is a nice touch, Getting a RX601 6 channel receiver for about $15 will allow folks to use it on their own scratch built quad(s),
@DustinDunnill9 жыл бұрын
Thanks. I'll have to look into getting a few Rx to use with other builds.
@dennishatz64009 жыл бұрын
yyea...good video. getting one soon. thx
@DustinDunnill9 жыл бұрын
Thanks Dennis. You'll enjoy it.
@dennishatz64009 жыл бұрын
Have been into RC cars and trucks for over 20 years....know exactly what you mean. Thx
@DustinDunnill9 жыл бұрын
Welcome to the air :)
@occ28128 жыл бұрын
hello my friend OSD can work with RANCAM; with the FATSHARK
@watchingin3d5498 жыл бұрын
hows the frame held up? I want to order the 300 frame but them arms look weak. tbh it al looks weak.
@raikijin9 жыл бұрын
this walkera runner is over market huh. here in singapore some shop selling them.
@DustinDunnill9 жыл бұрын
Mine had defects unfortunately but seems pretty good if you get one without them :)
@RockHeroBand9 жыл бұрын
+Dustin Dunnill Yeah im ordering from bangood since gearbest failed to provide me the fpv kit., hope mine don thave any defects
@jbads19899 жыл бұрын
Do you have to use an osd? For use with the fat shark?
@DustinDunnill9 жыл бұрын
Nope. You don't have to use OSD. You can turn it off or on or just take the module out.
@michaelmauk4179 жыл бұрын
great video. I really want one of these. can you tell me how you hooked up a beeper to turn on when you lose it in the woods? that is a great idea.
@DustinDunnill9 жыл бұрын
There's a video on KZbin but it's a little hard to follow. I may do one that's a bit easier.
@michaelmauk4179 жыл бұрын
+Dustin Dunnill.... thanks, that would be the best thing to do for these because a tracker would not really be good, but the beeper what a great idea thanks I think this is my next purchase it looks like so much fun
@poggi7478 жыл бұрын
+Dustin Dunhill HI Dustin, I follow your vids, yours are always easy to follow. I recent got the Walkera Runner 250 Basic 3 w/ Devo 7. I watched the existing vids on FOD, and blogs, which I found hard to follow, I was unsuccessful, had to reset my devo 2x. Hopefully you can make a video or post instructions on how to soon.
@xxcooldudexxlollol5729 жыл бұрын
only flew mine a couple of times ...went to my sisters house took it out the area was pretty built up flew nice for a bit lost control crashed I thought it was the signal of networks internet etc I flew it today after I got my blades onl;y went 20 feet away went side to side then nosed dived into ground totally lost connection so it will be going bk
@DustinDunnill9 жыл бұрын
Bummer. Hope you get it sorted out.
@MasonSauseda4 ай бұрын
How do you get it to flip? Because I’m on the devo 7 and can’t get mine to work
@Mailbagg149 жыл бұрын
Great review👍🏻 Do you have a link for the software to reprogram the toggles?
@DustinDunnill9 жыл бұрын
I'll get one up in description later today for you.
@Mailbagg149 жыл бұрын
+Dustin Dunnill cool, thanks man.
@DustinDunnill9 жыл бұрын
Put this link to multiwii in description. code.google.com/p/multiwii/
@Mailbagg149 жыл бұрын
+Dustin Dunnill thanks I'll check it out !
@parkersciolino17889 жыл бұрын
Can you please do a video on how to do the throttle hold? Thanks!
@DustinDunnill9 жыл бұрын
Hey Parker. Yes. I'll put it on my list for this week.
@parkersciolino17889 жыл бұрын
Thanks
@mr.j92324 жыл бұрын
Where is ur video about throttle hold sir..? I cant find it..
@hankVa13ncia8 жыл бұрын
Dustin any links to show how you did the throttle hold?
@tygasdeath69148 жыл бұрын
i just got one of these today man how can i calibrate the devo to have prop throttle from start
@kevinpinkney12588 жыл бұрын
Did you take the lens cap off?
@brenbouza77268 жыл бұрын
After his description of the trainer cable, I think not. And when he weight the quad "stock" he still had his camera on it...huh...lol
@Soldier53flyer8 жыл бұрын
Can you put a GPS on it? It needs a lot of help! I ordered one before I seen this review and I hope I can send it back if it's as bad as this.
@DustinDunnill8 жыл бұрын
+Soldier53flyer mine had some defective issues which Gearbest fixed by sending new components. I'm sure yours will be fine. Not sure but there are open ports you may be able to add GPS
@Soldier53flyer8 жыл бұрын
Thank you
@mauriciosalass8 жыл бұрын
excelent explications, Can i use battery lipo 4 cell? thanks
@DustinDunnill8 жыл бұрын
+Mauricio Salas Thanks, yes 4s compatible.
@mr.j92324 жыл бұрын
Are u sure sir..?
@seferon1007 жыл бұрын
Good day thank you for video. Can you please make video about Devo 7 transmitter , like how to add couple drones to this Devo-7 Thank you.
@iiiDartsiii8 жыл бұрын
Yes my first flight of this did the flip of death and broke the prop.
@juancarlosoanelli96266 жыл бұрын
FRIEND, THE OTHER WHITE CONNECTOR THAT TIE (gnd, +, video,,SD-K, 6.5 M etc) what is it for? RESPONDER
@omaralagna92314 жыл бұрын
Hi. do you have any idea of why leads from ods and main controll are constantly red?
@jerry4114112 жыл бұрын
hi Dustin, would you take a look at my 250 ..
@simoncross40K8 жыл бұрын
would it be possible to hook up a go pro as an fpv straight to your monitor with this drone? if so how? Thanks
@AlexDG19908 жыл бұрын
You technically can but you'll have latency issues and the fpv cameras adjust to light quicker so you don't fly blind when moving from different lighting conditions.
@occ28127 жыл бұрын
how many inzes SCREWDRIVER Hexagon makes for ranner what Hexagon SCREWDRIVER buy for the ranner 250 ?? amounts millimeters-inzes ???? can you help me
@r16ruslan8 жыл бұрын
Dear Dustin Dunnil, How do you set up hold props on devo 7?
@RyanKubishin4258 жыл бұрын
What is the speed of this quad? I read its 30mph(US)
@englishdave86359 жыл бұрын
these have been getting real bad feed back in certain forums and they now have a Facebook group full of people with problems it's a shame now I just don't want to get one
@DustinDunnill9 жыл бұрын
It's not without issues. If you get one that's not defective and set it up right, I think it's ok to start with for an rtf for those that don't want to build.
@angelrodriguez-nw3rv8 жыл бұрын
And im talking about the fpv problem just change the srews on the camera the stock screws are too long
@Bacon-ol3yr9 жыл бұрын
hello Dustin, I'm new to this. Can you tell me how to arm it and disarm with the switch instead of the joysticks. Thanks! I tried to use multiwii but I cant figure out how to use it. I don't think my computer recognizes the flight controller when I plug it in.
@DustinDunnill9 жыл бұрын
Hi Viva, there is a video on KZbin that show's how to do the throttle hold where a switch will stop props no matter what throttle is at and that's what I've done. I still have to arm with stick bottom corner while throttle hold is on and then when I switch off TH it is ready to fly.
@Bacon-ol3yr9 жыл бұрын
+Dustin Dunnill I did that already, but I can still disarm the drone while its flying. (like I accidentally did yesterday, fell 50 feet from the sky like a brick :( so is it possible to move the disarm and arm function to an unused switch?
@DustinDunnill9 жыл бұрын
Yikes, I think what solved that for me was also modifying the throttle trim so it's always at 6% throttle. When it's flying, no matter what I do it will not disarm until I flip the TH designated switch.
@Bacon-ol3yr9 жыл бұрын
+Dustin Dunnill hmm. It does not do that for me. What KZbin video did you exactly watch?
@DustinDunnill9 жыл бұрын
+Viva Gamez I kind of forget which ones by now sorry. Try to search and you should eventually find them.
@zack69058 жыл бұрын
Does everyone of the packages come with us adapter when I do USA warehouse cause when I select it it increases the price by a lot pls help??