The British Army has the ULTIMATE Military Knife!? Indestructible BEAST

[@DutchBushcraftKnives]

Sponsored by www.Knifeenthusiast.com ! The place to sell or buy knives you might not find anywhere else like this discontinued spyderco: bit.ly/DBKSpydercoProficient Check them out and support small knife business!

[@tphvictims5101]

Chinese ?

[@packersmresandvintage]

£107 Holy dogshit I can't say ote about price my dad gave me the one I have

[@stewartrv]

Is that a genuine MOD knife? I didn't see the NSN number on it I think that the genuine all have "NSN 4240-99-127-8214" on the blade don't they?

[@SkunkPunch73]

Ahh the joy of reading the comments it makes me so glad i don’t know anyone of you lot. Or i honestly think i would end up water boarding myself!!😂😂

[@danielmcfarland1653]

Can you please review knives from greyman, rmj tactical or winkler

[@InquisitiveBaldMan]

Think this knife was for comandos going into arctic combat. It's meant to be a hatchet, knife and spade all in one. The metal isn't flush with the wood so at -30 celsius your skin doesn't touch the metal.They don't sharpen the knives in the box, its up to the soldier to keep it sharp. The soft metal means it can be sharpened on any stone and also means it will never shatter or be brittle in low temperatures.

[@paulharding366]

At last, a brain.😊

[@gilbertopadilla3611]

Satire? Or truth?

[@Tonys-Adventure]

I got issued one of these with 42 cdo when we did arctic survival and warfare training. I also got issued a "brand new" one dated 1971 for jungle training in Belize. This was in 1996 and it lives in my garage toolbox to this day.

[@geegaw14]

If it is -30 celsius i dont think you would be bare handed when using the knife. I seriously think that is part of the design, probably just poor quality control

[@michalurbanful]

Arctic combat? At -30 celsius? Wit SKIN on the metal? U SERIOUS? 😀

[@frankcavill2206]

I was issued one of these for my first arctic deployment to Norway, I deployed with 42 Cdo RM, It was a decent knife for the arctic, good for chopping small trees and making shelters etc.

[@David_LoPan]

Gen mate, I've still got mine from 45! Some Matelot tried taking it off me saying it wasn't pussers issue, then I showed him the pussers arrow. I like it! It's a great chomper!

[@samsnuts4716]

The knife handle is met to be larger than the tang. To keep your hand making contact with steel,even when wearing gloves in extreme freezing weather. Not sure if rivets are %100 copper but are recessed into handle for same reason.

[@nickbremner6274]

This was called the Wilkinson survival knife and was issued to all members of the RN who were sent to Norway to take part in 3 Commando Brigade's winter exercises. No bladed weapon is issued by the MOD sharp. It is very heavy to aid in cutting down vegetation to construct overnight survival shelters. It is of very robust construction and the blade is wide so that it can be hammered to aid in cutting firewood.

[@daemonharper3928]

In civilian hands, everyone reshapes the handle, uses paint remover on the blade coating, grinds down the finger guard - and convexes the edge. It does actually become quite useable. In the army it's used for digging holes to poop in more than feathersticking 🤣 It's meant to be 1080 steel

[@DutchBushcraftKnives]

hahahahahahaha! well it has enough blade to be a shavel i guess hahah

[@hdsamte]

😂😂😂

[@haydenwayne637]

The "shovel recce". Never used a knife for that.

[@CreepyUncleStupid]

aint wromg

[@Elijah_Dove]

Totally agree. I chipped through a brick wall with the one in the Land Rover.

[@smartugs1]

I bought one of these ex surplus when I was 15, 32 years ago. I replaced the scales with some walnut to make a nice handle with brass pins instead of the copper rivets to make it more comfortable. I still use it today. Most solid knife I own by a long way.

[@jim-bob-outdoors]

It was never a general issued knife, because its too heavy. Only in some areas of operation. Normally kept in the tool boxes of vehicles. It was always a muti tool rather than just a knife. Shelter building, digging holes in the ground and all the things you would not want to do with your own knife. Mine is modified also. I use it camping rather than taking a hatchet.

[@DutchBushcraftKnives]

it feels exactly like thats the right place and use

[@Jib230181]

Yeah I served 8 years as a British infantry soldier 🇬🇧 and I never was issued this knife the only knife I was ever issued was the bayonet for our rifle the SA80 A1/A2 but that was designed to kill only not for anything else really, unless is this a new thing soldiers now get issued as I served 2001-2009.

[@gavinmiller690]

It is & was an issue kniffe for us in the Royal Maines. It is issued both on artic warfare and survial element of training. It is a very old design designed decades before any of the big leaps in survial knife designs and technology today. Handle was aised above the metal if I remembe to to help protect aganst hands sticking in cold but you were also issued a a ange of mitts and gloves to also help.

[@jim-bob-outdoors]

@@gavinmiller690 not general issue as normal EDC for most British units though. 👍

[@Jib230181]

@@gavinmiller690 thank you for saying, yeah I thought it might of been for artic and jungle etc. I’ve just never seen it been issued to anyone but then you was in one of the best units in the world. Thank you for your service, respect ✊.

[@Vormulac1]

This is a terrific knife, it's a perfect blank slate. The handle is designed to protect the user in freezing conditions, but most people grind it down. All this really needs to be the last knife you'll ever need is to have a decent edge put on it.

[@473specop]

I was issued an MOD Knife for Norway tours 1985/6. It's a great knife for felling young trees for making Brushwood shelters, you can't all carry Forest axes, so it's a great stop-gap. I kept one throughout the rest of my army service and still use it for Bushcraft today. As I say, great if you have no axe [with the curve at the end of the handle together with a para cord loop you can really get some kinetic energy when swinging to chop]. You can also do most normal cutting tasks including feather sticks and lighting a Ferro rod, I love them! I do have a new sheath made for mine though.

[@nicholsliwilson]

@DutchBushcraftKnives the MOD utility knife is deliberately supplied dull so solders can be taught to sharpen it.

[@haydenwayne637]

I never once saw a sharpening stone during my time in the army (Royal Engineers).

[@gregpower308]

They were in the bayonet frog mate. A rectangular oil stone.

[@gregpower308]

They were in the bayonet frog mate. A rectangular oil stone.

[@nicholsliwilson]

@@gregpower308 it’s actually integrated in to the back-strap of the scabbard & the fact that you’ve forgotten that is a good indictor of how… “useful” that particular stone was. Then again we gave you a file to sharpen the issue Golok (machete) & whilst I understand it, as a “knife guy” that hurts my soul.

[@haydenwayne637]

@@gregpower308 The SLR bayonet did not have an oilstone anywhere, besides that my personal weapon was mostly an SMG and I never got to see any bayonet for that. Fact remains I NEVER saw any kind of sharpening tool other than a coarse file (for the golok and in the vehicle tools) during my time in the army. Not in WFR, not in AER.

[@MaxwellMoore-d1u]

Just for your information Yank .The vaunted American Bowie Knife 🔪 was made in SHEFFIELD. England wasn't Sharpened until it Reached America. So it didn't get Taxed .

[@velvetine74]

As a British person discussing British military equipment we have a very long history of supplying the troops with shit kit to save money. Then the troops complaining that it's shit so it all needs a refresh and ends up costing more money than it would have to get it right the first time!

[@NoLaunch]

As an American, we do the same thing with healthcare 😅

[@shipwrek4388]

That's everyone man that's how they get those bigger budgets and make money dissappear. Also help there businessman buddies its 1 big fuck show.

[@martkbanjoboy8853]

It looks like a dumbed down version of the legacy Aitor Jungle series. The daddy of the MOD knife is the Wilkinson Type D knife which was made in several versions but those are now rarely seen collector knives. The legacy Aitor Jungle - same.

[@greencanopybushcraftsurviv6713]

Yeah, good one. I ended up (like most), buying my own kit where possible. Boots, smocks etc. MOD work to the cheapest contract. Whoever produces the cheapest bit of kit, wins the contract (well, was in my day). Hence shit kit. Cheap = Mostly Shit (IMHO).

[@martkbanjoboy8853]

​​​@@greencanopybushcraftsurviv6713It could be carefully reground to a convex grind similar to the Wilkinson, but make sure you have hearing protection, and several gallons of coffee as you'll be there a while. 😅 An old Brit Army scout told me the MOD knife was issued as part of military vehicle kit. Seems like the knives always had 'a ride' sort of like an old horse pistol.

[@bernhardroth7109]

In Germany we do it other way around, we buy expensive equipment, and then we find out we bought no spareparts, no ammo, it‘s not fitting to the eqipment we already have! But the knives we use, are from Victorinox! Hell yeah, we did something right! 😅 Best regards from the Bavarian Forest - Bernhard

[@mark6809mm]

I wore German Para boots in the Army (British). Excellent bit of kit!

[@ianm2317]

I was issued my mine way back in 86. Still going strong with minimal touchups required.

[@DoloresVillatoro-ho5jg]

I just discovered this knife about a month ago. Good to see that you guys did a review on it. I have the all black version, all I did was sharpen it to a razor sharp edge. It's my favorite knife now, and very affordable.

[@sharzadgabbai4408]

Military personnel serving in arctic conditions have these quaint fashion accessories called glove liners and gauntlet mittens

[@TheDavewatts]

Superb knives, built to last, I've had mine for 20 years still going strong

[@DogsOfWarr]

Possibly one of my favourite knives in my collection - junk out of the box - but if the world was ending, I'd grab that & a Mora and you'd be set... I honestly felt bad for your pellets when you started blasting at it 😂

[@leemichel8199]

The knife was in most vehicles not meant for combat. The handles were overdone scales for winter conditions, so you never touched any metal with your hands ,Jack of all if looked after ,crowbar with an edge ,we often modded them sharpen etc ,took the top of the guard off for bushcraft situations great content brothers ,God bless you and your families. Lee

[@jakubhoke9526]

I've had this beast (modified) for almost 5 years and use it as an axe, crowbar and hammer. I spoke to someone in Sheffield and according to him it is hardened to 56-57 HRC from 1080 steel equivalent. In my opinion, it is perfect for rough work when it is supplemented with a longer folding knife for other work and killing some sausages. I use it with a large swiss army knife and it's an unbeatable duo.

[@centurycity]

Now that's a "Noife ". I got one and its awesome. That gap between the owod and the metal is to stop your hands from freezing in the winter. And it was never designed to be sharp sharp.

[@finbarscanlonwolf]

The softness helps too absorbe the shock & also makes it sharp in the field.

[@lonewandererbushcraftwildc6822]

The wilkinson sword early version of this knife is far superior. & the reason for the gap in the handle is when they train in the arctic the blade steel does not stick to the hand when it's very cold.

[@user-ue6iv2rd1n]

But you wear gloves in the arctic so that argument doesn't work. I think it's just a bad design, no knife in history has a sharp handle that cuts into you.

[@lonewandererbushcraftwildc6822]

@user-ue6iv2rd1n the handle doesn't cut into you I've used them in the field for over 20 years. & when your in the military you are discouraged from wearing gloves when your chopping as it can be dangerous. If the handle is cutting your hand when your using a real mod knife then the handle is either damaged or faulty. The knife shown in the video is not a genuine mod knife it's a copy its a bag of s@*t Trust me I've used an earlier genuine one & have done for many years & not once has it cut my hand by the handle. I'm not saying it's the most comfortable handle for a military knife because it's not but it's not bad either. & I've used hundreds of different military issued knives over the years & most of them do not have comfortable handles. Because they are designed to get the job done & work horses not designed for comfort civilian knives are way different to military knives. Civilian knives are designed for comfort. Military knives sacrifice comfort for durability. Have you ever handled a spanish toledo sf knife man that thing shreds your hands to bits in 5 min. I'd choose a mod type d anyday over that lol.

[@user-ue6iv2rd1n]

​@@lonewandererbushcraftwildc6822 I don't think you have to make a handle uncomfortable for it to be strong. You look at tools, axes, sledge hammers etc all have smooth handles. You look at historical melee weapons, again all smooth handles.

[@jamesfairmind2247]

Good David Attenborough impression at 6.02.

[@azhomeboy2000]

Falkniven F1 is the best military knife, imo.

[@2011GETUP]

Love these boys. Miksy and Martini keep up the good work.

[@jeffreycain6856]

US Army Cattaraugus 225Q (aka Quartermaster knife). Best indestructible knife with an extremely comfortable leather stacked handle. It’s very heavy, but with a refined edge, will do everything well. I haven’t dealt with a modern version, but swear by the WW2 version.

[@camaxeman4370]

Not sure that's an original issue y'know. Blade should be marked 'J ADAMS' (and a crows foot) or with 'Wilkinson' There are some Chinese copies around.

[@leejames9422]

I own a Wilkinson version and several other iterations of the knife. All were issued at different times for Arctic Warfare or Jungle warfare deployments or training. Like all things, the quality was watered down over time to save money.

[@flagstafup5857]

During a visit to MOD Boscombe Down in the early 90s, I was being shown the packing of ejector seat parachutes and the small box containing the survival items stored in the seat. This knife was included in the ejector seat pack up. I was given a survival knife on that visit. This knife served me well for many years, to this day it’s my go to for splitting wood. The leather sheath perished long ago and the wooden grip is bound in Para cord but it’s still a great tool to have around.

[@clarky4492]

I customised mine on my channel and have wanted this on here for ages

[@TheTommyw77]

Top video again Bushcraft boys. From England.

[@PhillipBicknell]

So the knife is like a traditional pair of British Army boots, which were expected to be polished and bulled to a brilliant shine on the toecaps by the wearer.

[@prometheus_beard]

It'd be a different world if British squaddies all sounded like Sir David Attenborough haha

[@Scurvybilgerat10]

i agree about the handle and dullness, my solution? i sharpened it and filed the handle down, sorted!

[@Scurvybilgerat10]

i wrote comment before i watched video, but as you can see this is a nice little machete

[@SkunkPunch73]

Nice to see that they’re getting a piece of kit that makes them have that extra bit of skill instilled into them like putting on a tidy edge! Which is not something that just comes naturally to a hell of a lot of people especially when you take away like you used the work sharp or fixed sharpening systems. As for the grips the none flush scales are basically because 99% of the time soldiers are wearing gloves and the grove helps in stopping the knife slipping around in the un gloved hand. As always h lads a total joy watching you two just doing your thing!! One highlight of this one for me Maarten trying to figure out an English accent 😂😂 it was first class 🤣😂🤣.. Hopefully you two have a cracking weekend and stay safe and healthy as always and that goes for your loved ones too, till the next highlight of my week 🫡🫵🏻😘👍🏼

[@gristtudor-mills4515]

After sorting out the scales, the next best thing to do is to remove the top cross guard . Then it becomes a good carver. It looks new knives ,like yours, has a standard heat treat with a hard spine. The spine used to be butter soft due to its differential heat treat, hence useless for ferro rods. A good cheap project but compared to a Fallkniven F1 ???

[@harveywyatt4316]

This was the first fix blade knife I ever had, my dad found it with a bunch of old tools and gave it to me. Great video 😁

[@MylesDavid]

Two knives I would DEFINITELY try are: The “Medford Fighter” and The “Winkler Drop Point Crusher”

[@jockspice]

Having had and used one of these during my military career, the things you say that are wrong are exactly spot on. We tended to customise the knife to improve the use, such as reshaping the scales and adding a better edge on a scandi-convex grind. It is for heavy use, it is not a precise blade and I have used it as a wood and heavy duty chopper. However, as you say, the bloody thing is indestructible!

[@MarcusCrypto-hu5je]

Yet another top drawer video- thank you

[@willienelsongonzalez4609]

I would genuinely love to see a DBK inspired British Military M.O.D. 2 Knife!

[@pabloandreszaparanrojas7975]

One of the duties of a new recruit, is to learn how to sharpen your own knife.

[@kamziceq]

Today on time! Good job, boys 😊

[@DutchBushcraftKnives]

haha!

[@Mat-kr1nf]

I believe the wooden slabs are like that to prevent the metal parts burning skin in cold weather. Is yours a genuine one, I don’t think so. There are some very cheap crappy ones, which, I’m afraid, I think this is, the genuine ones, and some decent reproductions by J Adams.

[@johnpwmcgrath]

You almost sound like David Attenborough at times….I hope that was your intent!!! Love your channel!!!!

[@DutchBushcraftKnives]

Haha yes that's my way to force a British accent hahahsha

[@RS4393]

The USMC issue Ka-bar was never meant to be a "survival" or bushcraft knife. It's main purpose is to eliminate an enemy in hand to hand. I still have mine but carry a BPS ADVENTURER as my camping, bushcraft, and survival knife.

[@realPromotememedia]

I’ve got this knife, it’s pretty good it’s pretty robust but the pop rivets in the handle come out really quickly so you end up superglue them back.

[@luca_the_legend]

I would like you to test the Eickhohrn KM 2000, the knife of the german military Greetings from Germany

[@MatthewLane-rm1ni]

Regarding “ best issued military knife reviewed…” . Fallkniven F1!? 😊

[@Barlofontain]

Hi, ex British soldier here, and I have one of these beasts, it is usually issued when you're deployed in the jungle, not for general issue. I agree with everything you said I also filed the handle down so that it is flush with the tang, but then I thinned it a bit too. I then ground off three top part of the guard, because it does catch as you saw. Finally, I ground the end to make it a tanto blade... It still weighs more than most knives, but I love the thing

[@YeojUchiha]

Huge fan, love youre channel!! Keep em coming!🙏🏽

[@robertwright7937]

Every Englishman has his Fairburn Sykes, y'know...I was issued mine at school.

[@christopping5876]

Love the attempts at English accents! Whenever someone speaks English with an accent, as you guys do, it means that they are fluent in at least one other language. Ask any Englishman how many lanuages he speaks, and if he comes up with more than one, it is a rare exception! Great video, as usual.

[@MrJakedog104]

I'd love to see you guys test a Winkler. They are issued to decent number of special operations units arount the world

[@cdb6010]

I mentioned the same awhile ago, Winkler currently has a new knife out, it looks awesome I want to know!! 😂

[@michael-qd4og]

When I was scratcher on HM Submarines ,I used to get this knife for the casing party,good solid kit.

[@charlesclaridy8646]

The handles had the gap so that gloves could have a gap to help hold the knife securely while wearing gloves, and so that in the event gloves were not available the skin would not contact extremely cold metal, the same would hold true in extremely hot environments (desert) to avoid burns from skin contact with a HOT metal tang. Blades were not sharpened so that the troops could sharpen them to suit their preferred use. Plus this way the troops had to learn how to sharpen the knife. The same was true of the Sykes Fairbairn Dagger regarding sharpening. I wondered about these issues when I finally bought the Mod 2.

[@John-d7p]

Not really. They are shipped in the rough for budgetary concerns when the contract was won to produce them. That gap is not for heat or cold issues. Those aren't issues. I've been in verycold and very hot environments. It doesn't count. The gap is another consequence of having to produce something on a government procurement program. Sharpening the edge is the first thing a guy does when they get a basic, combat/survival knife from any gov contract supplier. Even the famous K-bar can be much improved. My Ontarios both got the bench treatment the moment i unpacked them. Great dollar value and they are shaving sharp.

[@charlesclaridy8646]

@@John-d7p so all those articles out on the web about why that Gap is there in the purpose it serves are wrong? Is that what you're saying?

[@John-d7p]

@@charlesclaridy8646 I'm saying they are overstating it. That's all.

[@charlesclaridy8646]

I just love how evidently KZbin remove my reply to somebody who replied to me so that it can't be seen in spite of the fact that what I stated was true all one has to do is go and research it and we'll find plenty of posting articles about it on the net. Really KZbin playing communist games again.

[@charlesclaridy8646]

For those who are wondering what that's about I'll just say it this way I can see it possibly this way also we can get the knives ready but we've got a slight problem that handles are oversized well let me see one loud doesn't appear to be such a big problem I'm sure our lads can handle it. Actually it does appear that there might be some advantages to the oversized grips especially in extremely cold environments keeping the hands from actually contacting directly on the Tang and one could reason then that the same would hold true if the knife are left out in a hot environment such as the desert where the metal got extremely hot. Strange how I did my research and I read an article quite a while back and then there are still present-day articles are addressing the same thing but somehow or another I'm wrong. Really KZbin you're really digging down in the pits of the doggone septic tanks for this stuff.

[@dahotrod1533]

Predating this was the Wilkinson sword type d. An absolute beast of a knife, probably better in some ways. And another one is the Wilkinson sword Dartmoor knife. Made in the 80s based upon ray mears design. Absolutely beautifully crafted and very interesting knives.

[@mark6809mm]

Yeah I had one. I did 22 years in British Army. After I served 3 or 4 years I bought one of my mate for £10. Best buy ever as it lasted my whole career. They were issued to Para Regt when I was in

[@MercutioUK2006]

A few moments refining the blade and scales gives you a superb tool - as you showed. You can't issue sharp blades to squaddies, they'll do something rash and potentially bloody to themselves ;p

[@popmanjob8438]

There’s another version with the hand guard cut at the top to stop chaffing and also a notch cut out on the blade specifically for fire steels!! It’s a bit more rare than the usual version but they exist.

[@dahpughie]

Reportedly the overhand from the handle scales was to prevent the knife from freezing to your hand in arctic conditions.... This could just be another army rumor tho

[@DutchBushcraftKnives]

could make sense but it feels like shit hahaha

[@iamarawn]

​@@DutchBushcraftKnivesThat Dutch honesty is always hilarious

[@urbanjungle9600]

If your hands freeze to this knife in Artic conditions then the soldier it is issued to has no business using a knife. Not wearing gloves (also conveniently issued by MoD) in Artic conditions is just retarded 😂

[@Jib230181]

@@DutchBushcraftKnives yes but in the Artic you be wearing thick gloves so you might not feel the raised scales but still 100% be better flushed with the tang.

[@dahpughie]

@@DutchBushcraftKnives oh yeah its another decision made by a designer thats never used the tool he's making i bet

[@Cracktower1]

@1:46 Battonning with a swimsuit in the woods is such a weird flex.

[@TurnipGreen]

I'm always surprised at the amount of people who don't know to HOLD THE KNIFE STILL! PULL THE FIRESTEEL! 🙄

[@leej9897]

I have an actual military issued one of these I was issued back in 2000 while I was serving in Sierra Leone during the troubles. It's all black and the knife and leather sheath have all the standard military markings for it ie Crows Foot, NATO Stock Number (NSN) and Date of manufacture. Mine has a simple black corrosion proofing paint on the blade and tang with a 2 piece black wooden handle with the same annoying gap! My blade seems better in all honesty which says something. It doesn't seem the knife has changed much in 25 years other than the blade composition for your civilian variant and brown stained 2 piece riveted handle. They do take abuse well which is the point as it's for hacking, slashing and splitting primarily.

[@Autiematt]

To be honest I had family members that served in the British army and the survival knife he used was the standard issued bayonet for the L85 and the tips the that the veterans / older soldiers said go out and multi tool knife or Swiss army knife

[@randomcow505]

I cant think of a worse survival knife than a cast iron blade 😂 saw 3 of them shatter when dropped the issue multitool wasn't much better, mine came totally dull, not just dull, as in it never had anything ground into it, just a flat steel bar

[@fischeswa-9]

THANK YOU!!! (Yes im yelling) for showing how you can "slightly" mod a knife and make it way better! Most REAL men (and women) have "basic" tools and skill and can fix stuff. You guys are really entertaining reviewers! ROCK ON! ....... Oh I live in USA and K-Bars SUCK!!!

[@DutchBushcraftKnives]

haha thank you so much legend!

[@michaelelliott330]

Where I agree with your assessment of the Kabar USMC Fighting knife as a bushcraft knife, keep in mind that it was a hunting knife that was adopted as a Fighting knife, as such it did/ does quite well.

[@digglemeister]

Were once made by Wilkinson Sword, a very, very long time ago.

[@chaffcutter58.]

Still got mine from my flying vest,Awesome no nonsense knife.

[@glenhawman7440]

I have 2 and a joseph rodgers

[@chaffcutter58.]

@glenhawman7440 We had the choice of the Wikonson or that U.S. small k bar, with a saw blade that just got caught up in goat hair, or pig hide, best use the short machete.

[@jwhitehouse100]

Yeah fashioned after the Wilkinson type D, the wooden handle scales are meant to be bigger than the tang to stop your hands sticking to the metal in freezing cold conditions, as it was designed for use in Norway. A great piece of kit, it can be sharpened easily out in the field and can handle a wide range of tasks. I have a Type D and although over 60 years old is still capable of matching the performance of this issued tool.

[@snowflakemelter1172]

I remember these things , they sat in the stores since the day they were acquired by the MOD , this was the best place for them. Just like the WW2 era clasp knife that weighed as much 10 pen knives.

[@TheDoorspook11c]

Sharpening is what infantry does. It's by design.

[@kyle875]

I've waited so long for this video

[@Jackspratcouldeatnofat]

Can be used as a tough affordable bushcraft knife if you clean it up and carry something to sharpen it after each moderate use.

[@markbailey15]

I love my mod. Yes! you have to modify it to make it useable but you buy it knowing that. I had the grind reprofiled on mine to get a finer edge, it's still a beast and easy to get an edge. I've chopped down small tree's with little fatigue to the hand. For it's size it's an amazing chopper. Awesome video guys 😁

[@BadlydrawnBen]

Had one of these for over 20 years, its just a beast 👍

[@BenRelle]

Got one of those,but isn't wooden handled. Same thoughts as you - it's heavy, it's sturdy, it doesn't hold an edge all that well, but it's easy to put an edge on it. I like mine, but it's sort of not a practical bushcraft knife and it isn't a machete, so it sort of fails on knife related tasks (apart from chopping and batoning). But it's mine and it's like a faithful friend.

[@superfeschi]

12:11 I ❤ how Maarten says "Schnitzel". Pretty accurate I must say, but still funny 😂

[@DutchBushcraftKnives]

I never skip Schnitzel when i visit germany :D

[@monkchips]

We used to have issued kit, which we would keep for show, and then buy our own for actual use.

[@rule3036]

Same manufacturer of British Army machetes / goloks once the rough handles have been sanded , smoothed, oiled and shaped, and the blades sharpened they are tools for life. That said this knife is used more for digging sh** holes, chopping wood, bar prying ammo boxes open , wedging doors open rather than fine tasks like skinning animals.

[@billgates2903]

Martindale make the goloks aka tree basher don’t think they make this knife Wilkinson sword does

[@billclancy4913]

As a custom knife maker...here's a tip! Grind the scales with the grain in the grinder when possible.

[@Stuart-er8qz]

Appalling blade grind, handle and sheath but for £50 and a bit of modifying mine has taken a hell of a beating for the last ten years. Bloody awesome!ATB👍👍👍

[@Stuart-er8qz]

Also if it hasn't got military markings on the blade it's a fake.👍

[@DutchBushcraftKnives]

@@Stuart-er8qz i dont think its a fake. its just not bought by the military

[@MATTtheSAVAGE]

I have one of these and I clipped the tip slightly to make the MOD knife into a really hefty bowie. It really improved the looks without affecting the performance,

[@mattyp80]

A lanyard is added to the hole in the handle to allow chopping of small trees without the percussion going through the handle into your hand ( i believe you guys did a video showing how to do that!)!

[@azhomeboy2000]

"It has a little extra length so it's even better" Haha..that's what -she- Maarten said.

[@daniel.rosina]

Thanks guys, is seems to be a beast ☺️

[@captainscarlet6758]

The machete was the same. I bought one a few years ago. Took me a day to regring the edge profile and refinish the wooden scales. But it was worth it.

[@RidingHelga]

Had one for the best part of 30 years, it's used mainly for weeding, chopping tree branches, clearing ivy and occasionally halving bricks. It is indestructible and will outlast me, I'm sure of it.

[@lukepepper3949]

I have the older Wilkinson Sword MOD knife and it's still solid after 35 odd years.

[@Tony-zp8xn]

The problem with the Ka-bar Utility/Fighting knife is the 90-degree angles where the rattail tang meets the blade. It's a weak point and very susceptible to failure when excessively stressed. A better design for a knife with a rattail tang would be a smooth, curved transition from tang to blade, leaving no hard angles to fail under stress.

[@realbroggo]

With close to a kilo (over 2 pounds) of pressure still couldn't cut a BESS wire. Who the hell decided to call this a 'knife'? It's just a crowbar in disguise. However, once modded seems to be at least usable and a good wood processor. From what I can tell, the steel is either 1075 or 1080. Tough as hell but won't hold an edge long but also easy to maintain. In the field a rolled edge is much better than a chipped one. Sharp blades all.

[@johnmachner6450]

I'm impressed great video

[@osricsbruk]

I had one of those for years. The best thing about it was that it's indestructible. Other than that, it's a big, heavy numb lump. I don't miss it!

[@WessexBladesHandMadeKnives]

So, tidy up the scales, square off the spine, back off the main bevel, micro convex edge...and ground down guard a little .... make a beasty right handed leather sheath, but then what the hell do I know?

[@nick_mhz9840]

100% the handle needs grinding down to your own requirements and it needs a proper sharpen BUT I've had mine for years and it's not let me down. A solid functional knife. Definitely a "Jack of all trades, master of none" knife.

[@leejames9422]

I have a few of these including a very early version of this. Stamped with the Wilkinson Sword logo it is way better than the others.

[@daemonharper3928]

As others have said - the oversized wooden handle is to prevent the metal sticking to skin in Arctic conditions......the knife has been around for decades, it's not lack of quality control.

[@DutchBushcraftKnives]

makes sense! but it does suck for hard use

[@TheSkillotron]

If you were in conditions like that you would never have bare hands because you would get frostbite in minutes. Even if you had bare hands it's too wide and shallow of a gap so your skin can clearly still contact the metal because, you know, skin is squishy and will just fill the shallow groove.

[@shughes4113]

Arghh! You defeated the purpose of the overhang. It is designed that way to reduce cold weather injury. It may not feel good but it feels better that your hands getting frost injury if you had to use it in extreme cold weather . Guys, you’re better than this. Lol

[@ifv2089]

Nah Thats just lack of quality control nothing to do with extreme cold lol.

[@loukasskoteinos4278]

Giving the troops gloves so that they don’t need to worry about their hands being exposed to such conditions would be a way better idea 😂

[@johnwyman5939]

You fellows always make me laugh and dam good job on video as always.... 🇺🇸🇺🇸🪓🔪👍🏻👍🏻

[@DutchBushcraftKnives]

cheers john! much appreciated

[@andrewmcgibbon9785]

The problem with the handle slabs being larger is a problem that can only be fixed temporarily. The handle scales are raw hardwood. They expand and contract with humidity. So in the summer the scales are larger. In the winter, they shrink. If you grind them flush when humidity is high, when the shrink back in the winter, you are going to have a nasty burr on the steel of the handle. I make knives as a hobby and this is the reason I don't use untreated hardwood on handle scales.

[@49mrbassman]

The best knife I've ever owned was a Green River hunting knife

[@sudhirnaik4751]

Back as far as you go, the Ghurka Kukri is the best for chopping through bone and meat, tree trunks, and silent night time adventures 🙏