One of the best mods...

[@kevinjentzsch7405]

Should do a carbon front lip to pull it all together!!

[@dylanwatkins1019]

Dude go check out Ricer Miata’s channel he’s selling a Evo 1 that could be something really sick to get into since you do a lot of Evo stuff

[@HaHa-hn3sb]

Tell me I’m not the only one who laughed when the dash popped out while he was testing the boost gauge!!

[@BushidoPhoto]

I laughed and spit out my drink.

[@surenberugoda161]

nope haha

[@UltimaBlank]

It was so funny 😂😂

[@kawikastricker2946]

Get to meet Devin and Bobbi in person and next video I watch he installs same canards I have on my car. So sick. Absolutely love the builds.

[@angusmacgyver1390]

You could consider the BLITZ FATT ADVANCE Turbo Timer with Boost sensor, with some minor modifications it could sit in the clock area giving you a possible read out of Boost, including max Boost achieved, Battery and Turbo Timer settings both Auto and Manual settings alarm limits for Boost and Battery. I have this in my EVO IX beside the Steering Column and had considered the clock space but I needed the clock for traveling through states as a more accurate time on road in Australia as my phones would auto correct time to new Time Zone.

[@thomasmurphy5906]

Canards look sick and nice work on the boost gauge

[@UltimaBlank]

I'm doing this when I get my Evo, such a cool mod, keep us updated when you find a psi gauge!

[@rotorglowralliart2222]

Enjoy your trip in Hawaii. Much deserved!!!

[@ttakiari6820]

You're missing the Carbon lip and you should get the duct vents as well. That'll make the front look good.

[@kaneswade7235]

Sending love from Trinidad and Tobago and your videos are making my lockdown much easier to stay inside. Love your channel and cars 🙏🏽💯

[@JoelMartinez-lo8by]

This dude actually never stops on the grind this man is honestly such a role model for me

[@wesleyhelm7033]

Enjoy Hawaii !! I live here on Oahu you must have to visit Leonard‘s bakery for the best Malasadas

[@mattnucci7716]

Might wanna consider not taking signal from the fuel pressure regulator line

[@St4nceislife]

You should flock the top sections of the door cards so it flows more from the dash

[@stefanb974]

You get to reading in bars after a little. My gauge is in bars and I'm used to it now. Sleek mod too.

[@TheOriginalSpawn]

D, That Bar gauge is a Game changer 💯

[@Alex-kg5eo]

That’s so simple and so clean I always love the little mods makes such a big difference

[@justinlucero6652]

Are you planing to button up the black evo 8 and sell it ? Or she a keeper

[@badrababane9647]

The boost gauge location is amazing 👍👍👍

[@luvinassh8892]

man that's definitely the sickest build

[@SilentKiller-fx1qj]

Devins a little sauced it looks like.

[@delandroboxill8333]

Get a carbon front lip to make the front flow better

[@denilsonturciosmejia615]

You should put yellow strip on the canards, lip, and side skirts like the evo 10

[@denilsonturciosmejia615]

Love your content 🔥

[@nickjewell471]

The canards make the lip look small....need a wider lip now

[@Ggtvler]

Black hardware for those canards is much needed. Clean it up big time

[@IamByzer]

You need to do a yellow half cage. That’ll definitely up the interior. With some black and yellow harnesses.

[@theovandaele3220]

I had the (factory spec) winglets since 2006 on my IX. They weren't carbon though - these look pretty nice. Always loved them. Seeing this I might replace them with carbon ones that match the weave of my carbon front lip. Edit: still something wrong with the gauge though. It should really show 1.8 to 1.9 (or 2.0) under boost, and go up/down in 10ths of a bar. Vacuum would be -1.0 bar or around there, and 0 bar on the gauge would be atmospheric pressure (which in reality is 1 bar :-) ).

[@LeonNaude111]

Life is getting better and better it seems👍

[@marllleyy]

Devin I still miss the O.G Black 8 🔥👌👌The Blue Is Prefect In Her Own Way Still 🥰

[@andrewtillotson9472]

Dannnng that thing is sooo clean!

[@supersage789]

Do you have a video on how to install the AFR gauge,boost gauge and, oil pressure gauges for EVO 10 ?

[@amariheeralal4316]

The canards look sick

[@coltonatherley6980]

Bro you are literally the best I love your vids 🙌

[@justinlucero6652]

It little extra jdm Devin says lol good one!

[@H_Mathieu]

Can´t you use just the sender of the previous boost gauge and it will read in psi?

[@sf2372]

Nice man... I have a pair too and I am umming and arrhring cos of the holes i have to drill. This has inspired me though. No guts not glory.... hole

[@ericrosado1527]

They look sick Devin

[@douglasbrill1376]

I wanna see Bobbi sti with a built motor already

[@s3evi752]

It is

[@dustyn109]

You gonna pay for it? 😂

[@douglasbrill1376]

@@dustyn109 hell yeah 😂😂😂

[@s3evi752]

@@austinsolo3135 so what has the nigga been doing for the last month or so making 500 horse?

[@danhoward6441]

Import Face-off! Pacific Raceways - Kent Washington. 8/29 Show winner for sure.

[@harrybetty453]

Hopefully your changing these wheels, I just picked up a set of Enkei RS05rr's which would look 👌 on this

[@dekotaw12902]

i thot i was the only one who didn't like the rims he's got on currently

[@gnamir]

How much for the rs05rr

[@glennyjohnn7207]

Voice change at the beginning was tripping me out 🤣🤣🤣

[@andrew_ep_curtis]

love the canards

[@19Newby81]

Devin, do a quick vid of removing the 1/4 glass on the Evo X. Want to tint my car but want to take the 1/4's out so there is no light gap

[@TheTinTin12]

you should get a carbon front lip so it match!

[@gardo2492]

Dope videos every time

[@BushidoPhoto]

They should have added a dip switch to allow you to change between BAR and PSI.

[@twtng]

Carbon front lip to match the cannards

[@KelevraWhite]

To be honest I think canards are okay, they might look better once the Hyper Blue gets full aero of its own.

[@MultiWeirdthings]

u need a wider carbon front lip now hehe

[@twtng]

10:40 too much boost right there.

[@Enpatsu393]

I think it would match even better if you had a carbon fiber front lip. Either way it still look sick.

[@ej1975sok]

Do a front carbon lip to match

[@LuisGonzalez-qv7xz]

The only thing I don't like about this evo is the black part (WRAP) of the front bumper

[@craighorton6387]

You tried a CARLY OBD to fix the M3 headlight issue Devin??

[@haydnvankirk7367]

When u gonna do the evo 8 10 min build man?

[@gavinluckyfq3609]

Needs a new lip now in my opinion looks odd that they stick out further on the sides than the lip bellow

[@watsnu2day]

Hoping to meet you and bobbi tomorrow at the evo meet at corps even though im a subie guy at the moment. Btw, i will bring you some pupus (appetizers) or sampling of some local food for grind on if you dont mind signing a shifter trim for me, if not its all good, but enjoy the food and aloha!..my name is kevin,...

[@kainc7136]

Think it smiles now.

[@jamesbooker1518]

What the name of that color

[@scobius1]

Was I trippin' or did the gauge read HI..does it max out at 1.5 or 2 bar?

[@tradeMark182]

Troppy goat

[@bfighter125]

How do you apply the Avalon ceramic on matte finish rims, they are so rough. And these are TE37 LS in Bronze, I was gonna apply, but scared myself into not doing them because of the rough finish. IE: It's leaving lint and tiny fibers when cleaning them.

[@AvalonKing]

That can be a bit tricky but I would suggest cutting the applicator and suede and using bands to make for a very tight and snug fit and then apply as normal. Wait for 1 to 2 hours and make a second coating

[@kendallcamacho.11]

Beautiful mods 😍💪💥 sick 🤟

[@yuanbissessur6838]

You need more carbon fiber part and a carbon front lip

[@alexdeonarine6717]

🔥🔥🔥🔥🔥🔥

[@jantzen2012]

Sick!!🔥🔥Evo

[@raymondyesiltepe1804]

Need carbon ducts then the front is complete, still looks sick though

[@Ivangenelio]

Personally think you need a more aggressive lip now

[@AndreysLife]

I think it looked cleaner without the kanards (or how you spell it lol).

[@Jon_09]

Carbon lip would match that. :-)

[@MTRBuilds]

Needs a bigger front lip (carbon fiberrr)

[@jordanpanich]

Nice!

[@troublemakerakablack7759]

I like ur videos 🔥🔥

[@jobearboo8269]

bro do more then one hawaii vlog!!!

[@Catloose]

1 BAR = 14.5038 PSI

[@danboyes7477]

Hey Devin, I've seen one of these boost gauges zada-tech.com/products/single-gauges/oled-13-digital-single-boost-gauge-high-pressure-60-psi-4-bar fitted in the clock location of an evo before. Looks absolutely amazing and just a cut above the digits

[@odinsontm5368]

needs a carbon fiber varis lip!

[@jasondewar2188]

30psi is 2.0 bar. Would still prefer to see psi!

[@Hritik_93]

Bro wrap or paint the bumper lip gloss black it will look more aggressive

[@thomasmitchell6921]

1 Bar = 14.504 PSI

[@chrisss8130]

Post notification gang

[@ilj5000]

Boots/Vacuum 🤣 love it

[@s3evi752]

U need a carbon fiber lip now

[@Aar0n5Aml]

Please not that rear diffuser please. Put some carbon rear spats on instead

[@nestothepesto5178]

Lol Full Sned Boots!

[@EsePlebeJosee]

Canards are ugly too me on any car,

[@rahimiazizi1735]

Just widebody if u wanna blue look aggresive

[@richardpowell723]

👍

[@shaneross1998]

"boots/vacuum" xD

[@Castiel_Pr]

🤙🏻🔰

[@sergiojuarez6757]

Al 💯😠😠😠😠

[@truelow]

Needs black hardware, but besides that, I say ok

[@spookiazie4540]

I have a p0017 fix my evo x for me brother 🤣😂

[@abrahammoua4748]

Not first*

[@kevinadkins8469]

First. 👨🏾‍🔧👨🏾‍🔧👨🏾‍🔧👨🏾‍🔧

[@sergiomarquisvelez3705]

Second 💯

[@sergiomarquisvelez3705]

Devin I need help w/ 05 forester 💯

[@a.nordqvist]

I dont like it. Looked way better before. The car looks anazing tho

[@D4mo2612]

What would look better is to take that stupid wrap off. It looks so shite as it doesn't suit the car. An evo 8 is supposed to look aggressive. Not looking like a girls car.

[@fabianmartinez-xx4nz]

I agree, the Pepsi blue looked better

[@mishammer9698]

U need a new carbon fiber lip. It looks sick. Why don’t u look shit up be for u order it. I see u waste money on stuff that don’t work

[@rennelwilliams1946]

First to comment