A costly mistake.

[@kellylindamood1590]

If I can make a suggestion, why not get a dry erase board and keep track of the builds that way? Thanks for the great content. Keep it up!

[@colbychymycz4730]

he does have one, under the flags on the wall

[@albertomarin7240]

I don’t think he’s written on it since he got the shop lol

[@jtocguy]

Gone in 60 seconds style 🤜🏼💥🤛🏼

[@uafoo]

For the Hawkeye, you can order the parts you need, then cancel the order before it even ships cause you’ll still get a receipt emailed to you

[@NeffsyStudio]

Yo this guy is on to something that’s genius

[@joshmills4419]

200iq

[@Jschwanger89]

Take your time and build things right. You've got a ton of projects now. Don't worry if you don't have content to post from time to time it's ok. We won't unsubscribe bro. I think we appreciate the quality diy builds you do.

[@Jeremy_EvoX]

Tech Tip: On Evo 10’s. The very top of the clutch pedal assembly, up inside the dash area, it has rubber bushings that tend to make a squeaking sound whenever you press the clutch in. If you get in there and spray the bushings with some lubricant, that annoying sound will disappear. Lol

[@phuongma5175]

Alway add loctite when install on flywheel or pressure plate , because you are running high horsepower, when the bolts remove and reinstall , the treads stretches or the bolts stretch, so add some loctite to secured all the bolts

[@joshmills4419]

dude the front right wheel wobbled pretty good when you turned the wheels on the lift

[@gothrulz1]

glad im not the only one to notice hope its not bent its brand new

[@jeffreyalejandre9306]

Missed your videos a ton man! Glad you got back safe from your trip! Man keep up the great content Dev!💪🏾🤙🏾

[@edgarardon3660]

Best way to keep track of what is needed for each build is put painters tape on the windshield with the list. Cross out the items as they are done.

[@SushiPac]

Glad you guys are back but also glad you guys took a break!!!! Break is well deserved you both work hard!!!

[@reign2732]

I look forward to your videos every day man! Keep pumping out this content you beast!

[@jamesk3565]

At least you saw the pressure plate bolt issue before reinstalling the transmission and having to pull it back out

[@BushidoPhoto]

That's crazy that it had those long bolts. I'm glad you didn't put it all back together and still have issues again. Props bro!

[@darrenderousse4804]

Thee best all around KZbin car channel! Who else does over 90% of the work by themselves?! I’ll wait!! 🤔 keep pumping out the awesome content man! Hey everybody let’s get Devin to 500k! Should be a mil!

[@angelbruno6556]

Happy to see you back man. Clutch and flywheel jobs are no joke! 💯

[@loekfelten548]

That was one rough day ! Glad you managed to fix the issues.

[@tuurkishman]

Can I make a suggestion to ,Devin I've seen you using a jet wash to clean dirty oily parts of have you ever considered purchasing a hot steam pressure washer .

[@JDMEvolution]

Good to see you back a great episode a lot achieved and fixed. Any links to the the tyre pressure inflator?

[@NoDayz0ff]

Nice find on the clutch bolts dude, something like that can be easily overlooked

[@artblackwood7936]

I'm always amazed at how much you get done by yourself.

[@hectorrivera5093]

Bolts were definitely the issue but resurfacing the fw was definitely the best move especially when you know your gonna turn the boost up

[@ThatwhiteSTI]

I can’t wait to see the subie builds start again! Glad you enjoyed your time off from working on cars

[@davidoconnor3971]

Is it just me or is your front passenger side wheel buckled? Thought it had a little wobble when you had the wheels spinning on lift

[@edwinrodriguez804]

i saw the same. Def some wobble there

[@stewart10239100]

I watch a lot of channels and this one is by far the best!

[@charlesradloff8083]

Devin, how about a link to that tire inflator. It appears to be rechargeable, sweet!

[@KC-zo7xj]

Those aftermarket bolts probably had washers with them originally

[@dadstro]

Glad you got a getaway, back to the grind 💪🏻

[@augustine360]

What a first day back. Nothing like facing the reality of the grind after vacation. Great to see you back. 🤙

[@thomasmurphy5906]

Rough 1st day back, I missed the daily uploads big time, good to have you back bro

[@peteranderton6521]

Surely the fact you had the flywheel skimmed thinner means the bolt holes would be shallower, therefore the bolts would need to be shorter ??

[@DJ_Driven]

Welcome back brother! Mistakes makes us grow to be better 🔧 💯💯🏁

[@robertwilbert1317]

Everyone needs a break....vacation good to see your back at it....love the channel and the content

[@Tofik0VW]

you took material off the flywheel making it thinner, bolts holes probably were just barely deep enough to begin with, now theyre took long i dont think you missed it the first time

[@Anfurnyy]

Devin maybe its just me, but 3:10 that passenger side front wheel looks bent.

[@sf2372]

So you were correct that the flywheel wasnt that bad to begin with. It was freeplay due to the long bolts... Never doubt the Evo King

[@vivi3548]

Good to see you back at it

[@evanlegault2257]

@3:10 did anyone else see the RF wheel wobbling on acceleration!?

[@That_turbo_fox]

Good to know I'm not the only one who struggles putting my transmission back in

[@hartpa]

Dude... When you spun the red wheels on the 10 in the air, the offside front looked buckled to Frick.

[@basedSTi]

Great work dude. 👍🏻

[@brianbelli2773]

What’s the link to the air pump???

[@derricknash4548]

Yes please

[@israeltorres6805]

Hi guys I have evox i have a question will it be okay if I use a tap and die set too re thread hole where stud went on connecting the turbo housing too my oem map exhaust manifold ???? TIA

[@caponecashfunds]

Glad u got a break but damn can u work on Bobbi's EVO ? Starting to think ur delaying because u don't want her to have the fastest car! 😂

[@vinbags]

Glad your back...I was having withdrawals!!! Lol.

[@michaelsilverstein2426]

Anyone have a link to that air pump he used? Thanks

[@SoloTravel.D]

Bro the front R wheel is verrrrry looooooose or they nuts are not torqued?! when you start the car you could see the wheel being very wobbly ... sheeeess :))

[@ianmoments]

I wonder if that gap on the pressure plate was bigger in some spots with the warped flywheel

[@christianbacud2037]

What bracket is that for the quickrelease bumper ?

[@alizae8084]

Glad you back 🔥

[@emeryman92]

Did you replace the tint on crusti yet?

[@tomswindler64]

Good catch on the flywheel bolts,good content,keep doing what your doing 👍👍👍😎😎😎

[@odysseyrider1]

May be a dumb question because I only work on Subarus If you can pull the motor quicker than the trans why didn’t you just do that? I guess I can see there’s obviously a lot of other things you need to disconnect when pulling the motor. But from my view that trans looks like a pain in the arse to pull lol. Serious question tho

[@odysseyrider1]

You don’t pull the motor from the top ever do you. I guess it would make more sense if you never pull just the engine from the bay

[@livingapexseal]

Built different didn’t even squat to pick up the trans all back power 😮‍💨

[@Nextgen_account]

What does a warped fly wheel feel like? Never experienced that

[@Mc88Flyy]

Fire content as usual 💪

[@kd3942]

Welcome back bruh

[@tyrondewee5253]

Nice to see you working on cars again

[@vinuyajohn719]

Haven't seen the EVO x camo yet...for a. Long time

[@2552]

when being a hoarder pays off

[@transactionmanage7317]

I sanded my flywheel before installing my clutch 😂 runs great no problem

[@Deafg37]

Funny when Devin said, oh my lord, I look like a homeless but anyways😂

[@devinbogue9162]

Hey Devin, how old were you when you first started working on cars ? And how old are you now ?

[@Pieter-vdP]

Check the inside of Bobbys tire!

[@dbkjayj9838]

i never got ym stuff from the drop 41 days ago :(

[@MrHiwu]

Throw a Digiorno in the oven and work on your car in the same shop 🙌

[@lmstuber6044]

Why don't you run lightened flywheels on your cars the evos it must increase power. Just wondering why you don't run then...anyone ?

[@edwinarroyo5971]

Your videos are satisfying

[@LeonNaude111]

Now for that squeeky pedal😉

[@aVEEAGUSTIN]

Evo is everything

[@odysseyrider1]

And dammit devin lift with your legs when you pick heavy shit up. How you picked up that trans is gonna kill your back long term

[@TheOriginalSpawn]

🔥💯👌🏽

[@heyu8076]

Hii devin waiting 4 u to upload

[@AWD_T]

You should invest in a tool cart. You will thank me later

[@ejripper5937]

Legendary

[@dodge1724]

Hey get some work boards up and record what jobs needs doing and what’s been done - work smarter not harder

[@МаксМ-ч1н]

Давай русские субтитры

[@LuiFromVuitton]

Notification gang 🔥

[@ryanmendez8000]

Let’s go

[@julliusnelson4027]

Second

[@Derekk_A4]

FIRST!

[@Jnlix1k]

3rd