Dye Sublimation Onto Glass Short Cuts

[@rogersshop]

To see this process step by step, watch this video- kzbin.info/www/bejne/laecqoN7abKjjMU&ab_channel=Roger%27sShop

[@joancaraballo1182]

Roger. Just did 18 of them and the turned out amazing. Just wanted to let you know that I transferred the rapidtac liquid to a small spray bottle (from dollar tree) and it works so much better. No waste and it is just enough for the vinyl to adhere to. No excess comes off the glass as it’s JUST ENOUGH.

[@TheBinklemNetwork]

seems im not the only one who enjoys the good ol' upside-down printed mug ;) mine is of a spaceship from a game so i can try to claim its all in the perspective

[@nikkipate-mercer8195]

Thanks!

[@kukync]

I'm speechless! Never have seen this before. I just happened to come across your video. Thank you so much for sharing!

[@michellerice5405]

Roger I’m new to sublimation, not diy or crafting of about every kind, I just wanted to tell you I really enjoyed this very straight forward video, I like your no fuss style, and I learned quite a lot. Thank you Sir.

[@TheSpike1959]

Are you sublimating onto the vinyl or onto the glass? I can't work it out by watching the video. I love your straight forward approach . Thank you for the video will be subscribing.

[@rogersshop]

The vinyl. To see this step- by - step, see this video: kzbin.info/www/bejne/laecqoN7abKjjMU&ab_channel=Roger%27sShop• DYE Sublimation On Glass Step By Step

[@amberwil684]

New subscriber :) I've been doing cricut stuff and sublimation for 5 years. And this blew my mind! Thank you for shared this with us all.

[@Elnahna]

Thank you for sharing and answering all the previous questions Mr.Rodger.

[@melaniekitchen8552]

OMG I did this and it turned out great. Thank you for sharing, I'm proud of my self

[@yvonnehughes3036]

I need to try all this. It's new to me!

[@toocraftychez8306]

Thank you so much for your video, love your layback style, easy to follow steps, think I'm going to have a go at this over the weekend. Much appreciation Chez in Au.

[@accapella4U]

Wow. Was this ever helpful. Found Rapid Tack on Amazon too. Thank you very much for sharing this info with us.

[@csaunders7007]

Excellent tutorial! I learned this process not only from your video, but from your answers to the questions asked of you. Thanks, I just subscribed.

[@DUCKSJO]

thanks for sharing. well done and explained.

[@caevans11]

This was great! I was trying to put a design on glass using cut out vinyl. This is so much easier.

[@carolynssistercantcook1181]

Thank you! Thanks for being real too!

[@debbiestein4712]

Hi Roger, I am seeing in most videos for glass Oracle 651 Matte or Glossy white vinyl is used. Could you use Oracle 651 Clear instead of using a laminate sheet on the Dollar Tree glass cutting board ? I'm not gettinga good seal with the laminate. I'm making suncatchers and the white defeats my purpose. Any help would be awesome. Love your videos they are such great learning tools !

[@rogersshop]

Yes. The clear works just as well.

[@joycepugh5347]

i've watch your tutorial & I just love them - I know you have done this last year - but what is "RAPID TAC"? can you buy this anywhere? thank you very much for your awesome shares

[@rogersshop]

Rapid Tac amzn.to/3JBYMGn

[@sheryltupa4289]

Thanks for the great tutorial Roger. Did my first cutting board and it came out perfect. I even cut my vinyl square with rounded corners to match the corners on the glass piece.

[@FullMoonLoonDesigns]

Thank you so much for this video. It was the first one I found on this process and I was just blown away, thought no way, how does the sub image actually go THROUGH the vinyl like that - but I tried it the same day and made my first one! I didn't have Rapid Tack but had a misting bottle with Synthrapol surfactant in it and found it worked perfectly.

[@deniseliscoumb7670]

Great video Can I ask, i heard the image dulls in a few months, is thst so? How long will they stay vibrant? Thanks 😊

[@rogersshop]

Yes, this can happen and I actually did a video on this. It is not a consistent problem with blurring. They will fade if exposed to direct sunlight.

[@n1peacebaby]

You heat them on at the same time?? I thought you had to do this separately! Thus will save me a TON of time!

[@elainedaniels6541]

Thanks for all of your information.

[@mistarfix]

Hi Roger! Thank you for sharing, its amazing to know, we did not have a idea that's is possible🙂 I want to ask you, can be put this chopping board in dishwasher or must be only handwashet?

[@rogersshop]

Hand wash

[@sherrillgarrett5535]

This literally blew my mind. Thanks for sharing!

[@BobbieBTexas]

I did one today but little light but think had wrong temp. I got feet off and bought some gorilla glue and I touched it and my fingers stuck together. Finally got apart some strong stuff. Thank you love this and will make more.

[@normazaharioudakis115]

Thank you so much I manages to make two boards not as sharp as your colors but I’m so happy I really appreciate all your tips

[@cindigiannantoni6255]

I am going to try this with my easy press 2. Did you ever do a video on the Easy Press on glass cutting boards? I can’t thank you enough for your calm, easy going videos!

[@rogersshop]

While you can use a Cricut Easy Press, it takes a lot of pressure and patience to not move while pressing.

[@cindigiannantoni6255]

@@rogersshop thank you! I’ll give it a try.

[@cindigiannantoni6255]

Hi, one more question: I notice you have a Teflon sheet attached to the top plate of your heat press. Why did you do that? I’ve been watching your videos on heat presses and you didn’t mention that.

[@rogersshop]

@@cindigiannantoni6255 Protects the platen in case I have a geezer moment and forget to put paper on top before pressing.

[@karenk5229]

How do you attach the butcher paper to your press is it magnets or something

[@vuerukozu5463]

I love your channel ! Thank you for sharing ! God Bless !

[@tinkermccain8282]

This was a cool video and enjoyed watching it. I am not a crafty person but I believe I could do this due to the fact you explained it so well. Thank you.

[@valdirs.martins3921]

Mestre muito bom seu trabalho, sou o Brazil e ainda não tinha visto nenhum trabalho de sublimação em vidro dessa forma. Obrigado pelas explicações; mesmo sem entender o idioma, mas somente pela imagem deu para entender o processo do trabalho! Valeu.

[@annettebrandon7575]

Roger I’m interested in making an acrylic calendar with sublimation and not vinyl. Can you do a tutorial or do you have one I can view?

[@rogersshop]

Since I have used my big heat press to heat acrylic so I can bend it, sublimating on it (with a laminate layer) would be risky, if it works at all. The acrylic may warp or melt. I doubt that you could sublimate direct to the acrylic without a substrate to accept the dye.

[@rickswizzle4824]

Thanks for the tutorial sir. Really got me thinking of some new ideas.

[@pjfoltz8810]

New subscriber- Thanks for this tutorial - I have a cricut maker and want to get into sublimation. This is a great craft!

[@radicalrick9587]

*_I'm impressed._* *_You have a new Subscriber_*

[@sweetlyevil187]

Great Job Roger! Thank you!

[@jannetteperson8534]

Thanks Roger! very easy process to follow, I may have just found my niche.

[@sherrycastro3070]

Hi Roger thanks for the tutorial my vinyl keeps coming up and not adhering g to the round .. so you have any suggestions as to what this is happening .. I used rapid tac squeegee it and let it sit for 20min pressed for 10 min to tac down the vinyl pressed for 90 min

[@rogersshop]

Let dry for 30 minutes- 1 hour after squeegee. Press with vinyl at bottom, graphics facing up for 180 seconds at 385 degrees. Do not hot peel. Let cool to the touch. Wet paper surface, let set 3-4 minutes, remove paper. Works 100% of the time. No pre-press.

[@PatriciaBarrett-w1n]

I followed your directions and my project looks beautiful but I can't seem to get the paper from the sublimation paper off the back. Did I maybe heat them too long with my heat press....did the 385 degrees for 190 seconds? I used the same paper. Do you have any suggestions for removing the excess paper? Thanks great video

[@rogersshop]

Soak in water. It will come right off.

[@CatherineAguirre-pf4co]

You said in the video you cut the vinyl 7.70 x 7.70 whether it's square or round. What size is the image you are sublimating? I noticed you had a border all around.

[@rogersshop]

Size of image depends on what it is and the desired result. I don't always make it the full dimension of the vinyl. I do leave a .05" border around the edges of glass. This pretty much prevent little fingers from trying to peel off the vinyl. when making a full coverage graphic, I often make it 8" to make sure there are no white edges.

[@BobbieBTexas]

Your demos are awesome. Thank you

[@keelsg]

Amazing! Thank you! I'll be trying this today! Just normal, permanent vinyl yeah?

[@rogersshop]

Any good quality permanent outdoor vinyl. We use Oracle 651 and 751

[@paulmay6013]

Hi Roger I think I’m having a senior moment!!! I’ve watched the video twice and still can’t get my head around it (senior moment). The 651 is stuck to the glass then the print is placed on the 651 (ink side to 651). Then heat pressed. This I understand. What my senior moment is I can’t understand how the ink transfers through the plastic 651 and can be seen through the glass. I may be overthinking the process! Be gentle I’m still learning.

[@rogersshop]

Yes, it does. Does not seem really possible, but it does work and the results are excellent. And, permanent.

[@paulmay6013]

@@rogersshop Thank you for your reply and saving me from the senior moment.

[@BlingPalace]

Thank you Paul for your Question. This is what I know I thought I saw but then I watched it twice and still thought I missed something. I will have to try one day.

[@BlingPalace]

@@rogersshop thanks for your response and sharing

[@pamalasills1644]

Paul I had the same thoughts as you about the vinyl and the print. Thank you for asking the question.

[@AaronPetrosky412]

Just found your channel. Good stuff man!

[@rosarivero34]

Hi. I have a question: would you like tell me what vinyl do you use to do it, it is permanent vinyl , oracle or any other please thank you so much to create videos for us.

[@rogersshop]

Oracle 651 or 751. Permanent Outdoor Vinyl. Links in the video description.

[@WebbsCustomDesigns]

I like this roger thanks sir

[@meadenaloyd7497]

Can you tell me why my design blurs after a couple of months? And I love your tutorials!!

[@rogersshop]

Just did a video on that: kzbin.info/www/bejne/iIqZg6N_jp1koNk Still looking at other things, but this takes a long time since each experiment needs to sit for several months.

[@shelleyberger2735]

Did u ever try the easy press with the printed sub on top instead of at the bottom?

[@rogersshop]

Vinyl will deform and melt when done the other way and if you move at all while pressing, the vinyl will shift on the glass. Plus, you can't see if the graphic transferred completely without taking it off the mat, which is necessary when using an Easy press since you can't accurately control the pressure. This CAN be done with an Easy Press, but it is not the best way since it requires heavy pressure for an extended period of time and there is a risk of moving while trying to put this much pressure on, resulting in ghosting of the image.

[@anarobello7505]

TY so much I have a question about the 2720 printer if you can answer it for me...I would appreciate it

[@rogersshop]

Sure. What is the question?

[@anarobello7505]

@@rogersshop it started jamming all the time. so i bought some more paper and it isnt jamming but when i try to print a all black page with pictures on it , its coming out gray and the pictures are like transparent. im really frustrated and dont know what to do ..... I dont want to have to buy another printer but i dont know anyone that can help me.... thank yo for reaching out

[@rogersshop]

@@anarobello7505 Sublimation ink looks that way. Blacks appear gray and other colors seem washed out. I just shot a video today (not posted yet) on how to recover a clogged Epson 2720 sublimation printer that had not been used for many months and explained during the shoot about the colors being "different". Some suggestions: Under printer preferences, turn OFF high speed printing. Use high quality. Set paper to "Premium Presentation Matte" for sublimation paper. We use A-Sub and HiIPoo papers. If left to high speed printing, it does not saturate the paper as well since it uses fewer "lines". The video I shot today should get posted later this week. It isn't edited yet.

[@anarobello7505]

@@rogersshop Thank you so much. i did a lot of maintenance, cleaned heads etc... working with the right colors now... i have been sublimating since july of last year I now know i need to clean often... I truly want to thank you so so so much for getting back to me and caring... God bless you for all you do for us!!!! i subscibed to your channel and look forward to watching you...

[@rogersshop]

@@anarobello7505 The Epson 2720 head cleaning video is getting posted later today.

[@judimecham7320]

Thank you so much for this video. I watched it twice I think I have it down pat. Heading out to see if I can find the cutting boards. You did a great job explaining everything. Well watch all of your videos that you come out with. 👍😊

[@FullMoonLoonDesigns]

I live in MN and searched several stores. Only found a few of the ones with designs on them already - BUT if you soak them a bit it is easy to take a razor blade or knife to the paper/vinyl (not sure what they used, almost like a coated paper) and remove it. I tried to order from Dollar Tree website but no clear ones in stock there either when I checked last night, but they have a variety pack that has some clear and some designed. I did my first one the other day after watching this video and it was so easy!

[@vickifowler5069]

Thank you again Roger!

[@1961smudge]

Brilliant tutorial thank you!

[@Lifelocslove]

I tried to find the answer before asking… so far no luck. Question: do you have to have that spray to adhere the vinyl to the glass? And btw this is the BEST tutorial out there. So many others were super confusing. Thank you for your reply.

[@rogersshop]

No. You can also use plain water or nothing at all. The Rapid Tac helps in positioning and eliminating air bubbles. Water works too, but not as well.

[@Lifelocslove]

@@rogersshop OMG Thank you for replying!

[@denisehentz9257]

Amazing process! My mind is racing with other projects to apply this process. One question that I don't think you addressed. What amount of pressure are you using with the glass?

[@rogersshop]

Medium-heavy.

[@jessiereed4070]

So my question is the sublimation image on top of the white vinyl that was heated to the glass?

[@rogersshop]

Image is on the bottom, facing up, against the vinyl with glass above it. Step by step here: kzbin.info/www/bejne/laecqoN7abKjjMU&ab_channel=Roger%27sShop

[@tonie1106]

And I love the way you do it!

[@jorgemendieta8583]

What kind of vinyl is this one? Thanks for your videos

[@rogersshop]

Oracle 651. Permanent outdoor vinyl.

[@gregbaldwin6428]

I love this idea man. Very cool

[@christinecobbins6294]

Great video can I use anything other than rapid tack

[@rogersshop]

Plain water (good, pure water) also works, just not as well. Make SURE you let this dry before pressing or you will get blisters as any residual water will flash to steam.

[@poohv22]

Thank you so much for the video. We tried this and it works but the colours aren't as vibrant as yours, very muted with a cloudy effect. We pressed for 190secs 3 times and no difference to the colour transfer. We have a sawgrass sub printer and printed on glass settings. Any advice in getting the picture to be vibrant in colour?

[@rogersshop]

I do not have a Sawgrass printer, so not experience with settings on one. I do know that setting paper type on an Epson makes a huge difference as well as turning off high speed print and setting to best quality. For paper type (Using A-Sub paper), I set it to Premium Presentation Paper Matte.

[@tinafranklin1585]

Hi Roger. Love your videos all the way from Australia. Just a quick question. What can I use instead if Rapid Tack? We don't have that here. Can I use just water down dishwashing liquid in a squirt bottle?

[@rogersshop]

Just plain water. Don't add any soap as it may interfere with the vinyl adhesive.

[@donnapletcher8473]

Only one of my first 6 or so tries came out without random blotches (maybe they’re gaps between the glass and vinyl). I didn’t see any bubbles after using the Rapid Tac and squeegeeing, so I’m hoping you have an idea of what’s going wrong?. Thank you!

[@rogersshop]

Possibly not enough pressure or timing/temperature is off. Here it is step by step: kzbin.info/www/bejne/laecqoN7abKjjMU&ab_channel=Roger%27sShop

[@tychemamitchell1737]

Thanks for the tips I also sub onto glass also .can you explain how to setup the square cut of the oracle on cameo?

[@rogersshop]

I don't use a Cameo, but 7.75" square is all I use on my Cricut.

[@katherineharbigerwalker464]

Hi Roger, I need help. Last year I put together a couple dozen of these glass cutting boards. I followed your process and same materials (Dollar Tree glass cutting boards, Oracle 651, A-Sub paper, Hiipoo Ink, Epson 2720 printer and RapidTac), no problem. I have a few left over and thought one might make a nice hostess gift this weekend. However, when I pulled one out, the print had blurred badly when looking through the glass. The reverse side is clear and sharp, but what shows through the front is very blurry. Do you have any suggestions for future trivets? Have you had this problem? Thanks

[@rogersshop]

Yes, it can happen: kzbin.info/www/bejne/iIqZg6N_jp1koNk&ab_channel=Roger%27sShop

[@brittanycasey390]

If I use clear vinyl will the glass stay clear on parts where there’s not a picture? For example, if I want to do a 2x2 photo on a 4x4 plaque, will the plaque still be translucent where the photo isn’t applied? And the same for words. If I print out text on a sub printer and apply to acrylic, it’s always translucent. But, I want to keep the acrylic translucent and only opaque where my text and/or photo is.

[@rogersshop]

Yes, it will stay translucent, or clear, depending on the type of vinyl used. Some are crystal clear and some not-quite-so-much. I'm going to be making a video soon on sublimating to clear vinyl over glass.

[@chitariv62]

I have made these two different ways. I find that when i use the vinyl method and peel off the image once cooled it leaves a white film on the backside of the board image. Any way to avoid this?

[@rogersshop]

No. But, washes off with plain water very easy.

[@chitariv62]

Good morning. I have a quick question. How do i prevent my images to not stick to my laminate sheet once pressed? I have made tons of these boards now all of a sudden the paper is wanting to stick to the laminate sheet. Thanks for any suggestions you might have to fix this problem.

[@rogersshop]

It happens. Just drop into water after it has cooled and the paper falls right off.

[@chitariv62]

@@rogersshop Okay thank you. Someone also said there was moisture in the paper and put it under the heat for a few seconds to dry it some. Is that a good idea? Thanks for all your help.

[@tammygriffin4122]

love your video..question how did u get your writing to read correct? i made one and the writing is backwards... thank you for your time...how did u mirror the image via cricut or what? for writing to be correct when u turned it over

[@rogersshop]

I do not mirror graphics in this process as they are applied to the back and pass though to be viewed from the front. If you mirror the graphic here, it will appear backwards when viewed from the front.

[@fionalilley5073]

Great video. Can you use a Cricut easy press. If so what temperature and for how long. Thanks

[@rogersshop]

Yes and I have done this. 385 degrees F for 190 seconds with HEAVY pressure, so really lean on it! Be very careful not to let the easy press move or your image may ghost.

[@fionalilley5073]

Thanks will give it a try

[@reneeverklan8321]

hoping you have a suggestion. I'm following your instructions and my images don't always come out crisp and bright, they are dull and light in color. Any help or advice you have is appreciated.

[@rogersshop]

Not enough pressure and/or time too short and/or bed not pre heated.

[@bettiebardwell7883]

Is there another product I can use instead of Rapid Tac on my glass. Will Windex work. Thanks

[@rogersshop]

You can also use plain water. NO soap. Do not use Windex as it will affect the adhesive. Use of windex to clean the glass is fine, but do not use it to position the vinyl.

[@anitawarren6711]

How long does the picture stay clear. Someone said the picture doesn't stay clear for a long time. Just curious. Thanks.

[@rogersshop]

kzbin.info/www/bejne/iIqZg6N_jp1koNk

[@dorothyrose9262]

Love this idea and video! Thank you so much.

[@mrgrinch61]

I noticed on one of your other videos you wound up with some cutting boards that were clear non-textured I was wondering if you choose them yet and how they came out

[@rogersshop]

I haven't used them yet, but know that the results will be the same as with the textured. I've sublimated to vinyl on plain glass before. Dollar Tree picture frames are a good cheap source. Just keep in mind that the glass used there is about half the thickness of regular single strength glass. Easy to break..........

[@mrgrinch61]

@@rogersshop I'm kind of debating whether clear would make a better cutting board or not

[@rogersshop]

@@mrgrinch61 Most of our 8 x 8 cutting boards are marketed toward the home-bar-type setting. They are perfect for cutting up fruit for mixed drinks. A little small for kitchen use. The surface, whether textured or not, I guess will depend on the customer. I would think that the clear would show scratches more than the textured.

[@mrgrinch61]

@@rogersshop thanks you

[@WarLordPsycko]

is there a way to make these with a clear back round and not all white or a color ?

[@rogersshop]

Use clear vinyl or laminate.

[@Sunni877]

Have you ever had issues with the ink spreading over time? Seems like when I press the images they’re crisp but about a month later they start to blur slightly. I’m using oracle 561.

[@rogersshop]

It can happen: kzbin.info/www/bejne/iIqZg6N_jp1koNk

[@Sunni877]

@@rogersshop of course you had a video about it already! I looked but couldn’t find it. Appreciate the response and all your help!

[@chitariv62]

I have been using the laminate sheet process for my cutting boards. Now all of a sudden my laminate is wrinkling. Any idea what could be causing this. It was never an issue before. Thank you..

[@rogersshop]

Stick to name brand, like 3M

[@joyce1245]

I have never made any thing like this, I am interested in making some for my organization. My question is, what sort of sticker can I use or where can I order custom made stickers for this project? I have searched but am not even sure what I am looking for in ordering stickers.

[@rogersshop]

These are not stickers. You will need a sublimation printer with sublimation ink, a heat press, and permanent outdoor vinyl, such as Oracle 651. For the graphics, you can either make your own or have someone design them for you.

[@lyndahollins2881]

Hi Roger, can you use any other white? matt vinyl?? and I messed up my first sublimation onto a glass frame, is there a way to remove the sublimation ink? or is it a bust?? thank you

[@rogersshop]

Yes, you can use matte. To remove the vinyl, heat it up and scrape. It comes off pretty easy that way

[@ReginaWhite-f4o]

Did I see correctly that you pressed with the bare glass side up?

[@rogersshop]

Correct

[@vbelenpe]

Your video is very informative and organized. Good job. Thanks for sharing.

[@debrawest3562]

Love this idea! I'm going to have to try it.

[@dorothyrose9262]

What’s the rapid tack for and is there something you can use instead?

[@rogersshop]

Allows positioning and eliminates air bubbles after squeegee. Plain water can also be used. Do not add any soap or you will get spots.

[@justice2bserved107]

Thank you for sharing.

[@gerondagates8171]

I followed your instructions step by step but I used cricut white permanent vinyl And it still will not come through. So does oracle 651 the only vinyl that works.

[@rogersshop]

I have also used the Cricut vinyl and it works the same. Check your temperature settings and the time/pressure on the heat press. I use Oracle 651 because it costs less per foot.

[@gerondagates8171]

Thank you for responding.

[@gerondagates8171]

I had the wrong ink. Just tried it again and it came out just right. Then you again

[@willg9003]

i did my first one a few months back and it came out great, but after a few months, the image started to get blurry. Any suggestions?

[@rogersshop]

I've done some testing on this: kzbin.info/www/bejne/iIqZg6N_jp1koNk

[@kacaiola]

Thank you so much enjoyed!!

[@suzannenewman9053]

Hey Mr. Roger. I'm trying to learn this process but I have a small problem. When I measure something.... say that Square cutting board....I am not the best at reading a tape measure, but when I do get say 2 inches and 6 lines past....I don't know how to translate that in to a decimal for my cricut. I know I may sound dumb, I just don't know how. Do you know any tips that may help me learn to measure and translate to decimal? Thank you so much and any time you take to answer would be greatly greatly appreciated.

[@kaylavaughan3185]

I know you mentioned oracle but can I use cricut permanent if that's all I have?

[@rogersshop]

Yes. Works as well.

[@texas385homestead]

Thanks for this info! Always looking for quick tips!

[@chitariv62]

I am using Scotch Thermal Laminating Pouches, Laminate

[@rogersshop]

Same as what I use.

[@BeckyWilson1970]

This is great. Thank You. Can you use Oracle 651 clear for this?

[@rogersshop]

Yes. Just keep in mind that when using clear, the color of what-ever it is sitting on will affect the image color. I've done this on plain glass with a lit back light and it looks pretty striking.

[@tammycorton6873]

Would it be easier to sublimate the vinyl before applying it ?

[@rogersshop]

No. Just adding another step and sublimation direct to vinyl can have its own issues without a solid backing.

[@letstalkhair2167]

Love it thank you helped so much I have done a bunch of these

[@catdee9981]

I have a question. Is the white Vinyl and the image on the same side? I would assume so but I just want to be sure.

[@rogersshop]

Yes.

[@raquellawson3191]

Do you have to use vinyl? Thank you for the video, so awesome!!

[@rogersshop]

You cannot sublimate dye to plain glass. It does not bond. A substrate is required.

[@raquellawson3191]

@@rogersshop, got it. Thank you

[@carolporter7094]

I love this! I’ve been trying to figure out how to sublimate on glass. Yours is the best! I just wonder how to cut sizes with Cricut? Ps very good explanation.

[@rogersshop]

Within Cricut Design Space, you can create pretty much any size or shape, then save project for reuse.

[@57Icicle]

May I ask a silly question please. Why did you put your vinyl through the cricket and what did you cut into the vinyl

[@rogersshop]

Cuts it to size very accurately. It just cuts the shape, whether square or round.

[@Winsumone]

Love your tutorials Where do you buy the cutting boards or plates? I couldn’t find any at the dollar stores? Thank you

[@rogersshop]

We buy them direct at the Dollar Tree website. 24 to a case and they are delivered to a local Dollar Tree store, and we pick them up. Since I go though so many, the stores would never have enough in stock for our purpose.