Dynatrac Endurosport lift on my 2 door JL Wrangler! *First impressions*

[@rickaccurso]

I put this lift on my 4 door JLU back in December, I also put 35's on it, have taken the Jeep on a lot of trails since and this lift has stood up to the test. Still rides great.

[@DANIELHERNANDEZ-cp2ym]

Congratulations for this lift on your rig... It looks very nice!!

[@drivenmad2089]

Thanks man! Definitely excited to test out off-road!

[@moe2377]

Wondering if you have an update of how you like the lift and how it has held up for you? Looking at this one for my 21 Willys 4dr and very curious. Great video!

[@spencemad_4x427]

Did you end up getting this lift for your willys?

[@Verb130]

Nice shout out to TrailRecon. You should post a link to the video you referenced. Are you still in factory warranty, and does this lift affect the warranty?

[@drivenmad2089]

That’s a good idea! And I’m out of bumper to bumper warranty but since this technically isn’t the Mopar lift this would probably void that. Thanks for watching!

[@bosse641]

Awesome. Will look like a beast with 37s ?

[@drivenmad2089]

Yep! Just to fill out the arches a little more Thanks for watching!

[@AustinH7]

I think the 35s with that lift looks very proportional, looks really good.

[@drivenmad2089]

Don’t get me wrong, I think it looks good but at some point I’ll definitely be going 37’s just to fill it out a bit more. Thanks for watching man!

[@AustinH7]

@@drivenmad2089 I feel ya. I’m envious of your Jeep man!

[@mackies9151]

Dang the front is too high for sure. Bummer about the stiff ride. Wayalife jeep KZbin gave the lift a great review but it was on a 4 door and he only got 1.8" of lift. Do you think a 90lb winch will lower the front end some and smooth it out? I wanted this lift for a 2 door rubicon with 35"s but now I'm on the fence. I'm sure it will be better offroad with added flex than stock.

[@drivenmad2089]

It’s gotten better over time. Seems like it needed to settle in some. It’s definitely better than the day I picked it up. Now compared to the Mopar lift it feels smoother. Been in a couple of Jeeps with those and they were stiffer. I think having a winch on the front and a nice rear steel bumper and tire carrier like from AEV would help smooth the ride out even more for sure. But now I definitely want some 37’s 😂. Thanks for watching man

[@paulhenk4270]

Looks great. Curious if you carry any extra weight. I see you have a hitch, could you find a trailer and see if the ass end sags at all?

[@johnpurtell1142]

Hi I just bought the 2 inch lift and I have a 2021 2 door rubicon on 33’s. I haven’t installed yet, I plan on keeping the 33 bfg at also have metal bumpers winch and will have full skids My question is: Since I’m keeping my 33’s and all the weed that I have, would you say I’m going to get at least 2 1/2 inches of lift if not two and three-quarter inches I bought half inch coil spacers for the front because of the extra weight of the bumpers, and Winch, would you not put the spacers in the front I was just thinking that may be the lift would be 2 1/2 inches at the most, and then add the spacer of a half inch, which would be 3 inches in the front and with all that weight in the front, it would probably level off at 2 1/2 inches or maybe 2 1/4 inches what are your thoughts and a half inch spacers or not thanks

[@drivenmad2089]

honestly I think you ll be fine without the spacers. since this lift is designed to work with the 4 door jl as well which is heavier, even with the added weight of the winch and skid plates you should have around 2.5 inches of lift. mine was a little higher than that if I remember correctly. Thanks for watching!

[@kalo1010]

When will you be in Moab? Looking forward to that video and you testing out the lift.

[@drivenmad2089]

I was actually there about 2 weeks ago. Working on the videos 🤙🏻

[@808chaddy]

Looks really good. I got the same jL but with the 2.0. Just ordered a 2.5 metal cloak lift. Cant wait!🤙🏽🤙🏽

[@drivenmad2089]

Nice man! I originally wanted to get the metal cloak 6 pack game changer but didn’t want to spend $4,000 haha Thanks for watching!

[@LarryRichelli]

@@drivenmad2089 I am wondering why you guys are doing the 2" Mopar Lift. I just bought a 2021 JL 4 door rubicon stick shift and got a 7 year warranty that I do not want to jeopardize.

[@LarryRichelli]

I was hoping you would talk about 6 gear with 35's. I also have a stick shift in my JL and am concerned with the 35's being too big for the stock rubicon gearing.

[@drivenmad2089]

I actually talked about that in another video talking about if/when should I re gear. Just adding 35 inch tires on stock wheels. I wouldn’t even worry about it. Did that and all I noticed was the ride got better. Adding heavier wheels after the 35’s is where I started to notice a difference in power and acceleration

[@JoshuaHernandez-ys3fs]

Your so underrated

[@Michael_ryan91]

I have the same setup but with my warn winch ( 110 ibs ) the front is about 2 1/4 higher then stock. Im thinking about going 37s also. I just heard for the new ford raptor bfg is making a 37 k02 that is load range c that only weighs 68 ibs. I heard july 1st is when its available.

[@drivenmad2089]

That’ll be interesting to see. Either way I’d still want to re gear but I’d be interested in it for sure. Thanks for watching!

[@mackies9151]

37" MTR's are only 72 lbs but they are over $500 a tire 😪

[@mikesters3532]

As far as I know, Dynatrac does not have a suspension lift kit for the 2 door JL, only the JL Unlimited. That is probably why yours sits much higher than 2". "This Dynatrac EnduroSport suspension lift kit has not been tested on, and is not recommended for use on 2-door Jeep Wranglers, or any models with powertrain other than the 3.6L V-6 gasoline engines. This package does not fit with Jeep Wrangler Rubicon 392 or 4xe models."

[@Michael_ryan91]

What trails are u going to do in moab?

[@drivenmad2089]

Planing on hitting hells revenge, elephant hill. If I have time maybe poison spider or top of the world. Doubt I’ll have time to but more than 3

[@Michael_ryan91]

@@drivenmad2089 I did hells revenge a few times now its awsome. Its a good combination of fun but interesting enough to keep ur attention without being to hard. Top of the world is amazing id recomend it for sure it was a little rough coming down tho. In a 2 door i was a little more nervous then my old 4 door but had no issues. I did scrape my bumper a few times and bent a control arm bracket just a tiny bit.

[@808chaddy]

How wide are your tires?

[@drivenmad2089]

They’re 315’s. So “technically” 12.4inches

[@DUNEATV]

Looks good! Do not add bigger tires...

[@drivenmad2089]

It’s hard not too 😅😅. I’d only go to 37’s. Don’t really want anything bigger. And they’d most likely be the same KO2’s. I freaking love those tires!

[@DUNEATV]

@@drivenmad2089 Me too!!! I’m just worried about your gearing and gas mileage

[@drivenmad2089]

@@DUNEATV I’m actually already thinking about re gearing. If I do 37’s then I’m definitely re gearing.

[@DUNEATV]

@@drivenmad2089 My 21 Rubicon is stock still. I’ve done some really rough trails but I’m afraid to ruin the on road drivability. I don’t want a big Jeep that is slow, handles shitty and burns thru gas. To each his own I guess...

[@drivenmad2089]

@@DUNEATV trust me man I totally understand. I was worried about that too. Hence why my Jeep was stock for about 2 years. When I added just the 35’s the ride was actually better than stock. If you have an auto it’ll handle the larger tires better since it has 2 extra gear ratios to help out. The gearing on the 6 speed is kinda wack. 5th and 6th are way to close. I’m happy with my suspension. It just took a little bit to settle in. And when it’s loaded with gear it rode awesome!

[@Lt_Dan187]

WHERE'S THE VETTE?

[@drivenmad2089]

Haha it’s still around! It was away getting detailed for a few days. There will be a video on it again soon 🤙🏻

[@Lt_Dan187]

@@drivenmad2089 Sweet!

[@CMC61]

Isn't funny that when you do a lift then you half to upgrade everything else, " Just Because "

[@drivenmad2089]

Haha yeah...its like a snowball effect

[@Marie-kj3xf]

Need to learn how to use a tape measure…

[@rufusr.freighttrainjones9699]

Doesn’t look good on a 2-door.

[@rufusr.freighttrainjones9699]

Total waste of money to do all that shit.