Dyno Power Run Ducati 2022 HyperMotard 950 SP

Now the bike has been finally released I decided to get a Dyno run done to determine what the power figures are.
I went to two different Dyno companies on the same day - Midland SuperBike Performance and Road race Performance Meriden.
The bike was on the stock SuperCorsa SP tyres running 36psi rear pressures, with the only changes being the SC Project Exhaust cans and a Sprint Air Filter. I filled the car with 95 Ron/E10 petrol.
The Peak figures the bike made were all inline with what the bike develops out of factory with a good fuel curve.
VERY HAPPY.

[@ChasingTenths]

Cracking video mate , glad you went to two different places

[@hypermotardking]

Thanks

[@mrkang4080]

Always love your content... but you really should've put her on the dyno prior to the exhaust/tuning. Great work as always though!

[@hypermotardking]

No tuning was done on the bike.. it was just power runs and to check what the fuelling is like. Do you know how much headache it is to do a stock run then change all parts over and then do another run all on the same day/time/temp range 😭😭

[@martinellen1981]

I use RRP as my local bike garage top lads, the more i watch the more i want a Ducati Hyper

[@hypermotardking]

Yeah they good guys - Nick is awesome.. used them several times on my previous bikes.

[@bokiNYC]

Great bike, I'm enjoying your videos. I have 821sp and I've been riding it for last 9 years or so, looove the bike. I have Termignoni full system and factory upmap, bike is crazy good fun. Say, at 7:55, is your chain a tad loose or it's normal?

[@hypermotardking]

Thanks.. appreciate it.. I think because its a 5th gear pull thats like nornal.. same on my latest ECU flash video

[@user-io5ke7mi2t]

👍👍

[@hypermotardking]

Thanks

[@3h0xr0]

I wonder, how much does that air filter really add, if , if you had a de-cat already on. When I have put de-cat pipe on, and flashed with the de-cat Termi map, the change was really "huge", to me I would say: the power went up, and the thottle became more linear, more direct and smooth at the same time. I did not dyno test mine though... Just wondering about filter if there would be any gain from it, and if that may need map adjustment...

[@hypermotardking]

Its like a methodical way of making changes.. small and often and then test at each stage - unlike normal bikes the air filter install is a right pain in the ar53 else I would have done a base dyno run. I don't like the "off the shelf" upmap flashes because they are too generic, so will wait until someone can really adjust an change whilst on a dyno to really check the AFR.

[@v01d2010]

@@hypermotardking ye, but the “off the shelf” map for the price, and mapped using ‘standard components’ - that is anyone else can buy, such as SC pipes eg - can be pretty good. The 200 Eur map I got with UpMap is amazing to me. I also bought once map direct from Italy from a guy who tunes a specific bike model , also through UpMap, and , reality is I doubt anyone locally can do anything close to it . Also many tuners want a piggy back system such as DynoJet, and I don’t really want to have these extras connected all the time. The generics thus can be very good, esp if you don’t have a local Pro enough or for the money

[@hypermotardking]

@@v01d2010 Yeah true - for the price it's a great alternative, and I don't like the piggy back systems too. Being a new bike with warranty I'm just going to have to wait

[@stevekirk6399]

@@v01d2010 I sent off my ecu to be mapped and that came back like a new bike, no juddering in low gear, response was amazing and it felt faster top end. that was an xsr700. i decatted my Triumph 1050 sport sc project end can and K&N filter. took it to the dyno and it made 106bhp at the wheel, but after all that the dyno guy said it would make 115+bhp if I took the baffle out. but I just wanted it for a smooth tune which I have but it still really pulls mid range.

[@juankygatillo]

My Hypermotard 950 make 108 in the back tire with The power commander I have SC1 proyect no catalyst I eliminated, Springfield air filter

[@hypermotardking]

So not much more in power with the extra changes you have.. I’m happy with the current setup and I don’t want to change alot because if warranty

[@gavinstubbs3949]

I have to in spring put my one on dnyo as its full termi and got 3k on the clock so should be nice and run in

[@hypermotardking]

Cool.. get it done and share the results 💪🏼

[@juankygatillo]

Take the cat out an put the air filter and upmap and you see the different. I have the map with the power commander together my bike fly , I race with the MT09 and I beat them up twice my make 165 mph

[@hypermotardking]

I have an air filter.. but can’t change cat/up-map because of warranty. I prefer to use the Hyper on Ttack and not looking for top speed.. its not designed for that.

[@daytonasayswhat9333]

Not a change it goes 165 mph. Maybe your speedometer says that, but it’s wrong.

[@robertoguglielmino]

Hi , 109.8 with starace kit + full termignoni + up map with dedicated map for kit starace

[@hypermotardking]

Cool.. that makes me happy that I’m only 3bhp less without the additional costs which on the road no1 will really notice

[@3h0xr0]

It's more intresting to know the relative change - without starace vs with - do you have such dyno results?

[@jaseleese7549]

@@3h0xr0 The biggest change with the Starace kit and full system isn't how much extra power, it's the throttle response and how much faster it wants to rev. I'd say side by side on a dyno the power curves would b peak at around the same point, just the bike with the full system and Starace kit would have a steeper curve and more area under the graph.

[@3h0xr0]

@@jaseleese7549 I had a huge "direct" throttle feel / impact after de-cat + UpMap suitably. I wonder what if anything Starace kit can do in this case, it already became very direct throttle.

[@davidalderson3095]

Do you still have the cat and valve in the exhaust ?

[@hypermotardking]

Yes.. wanted to keep changes limited to bolt on/off and not fit any eliminator plugs etc.. besides its crazy loud as it is

[@davidalderson3095]

@@hypermotardking I have the 2019 SP with full Termignoni system and map plus a K&N air filter . I did a dyno run and the figure shows 115.7 hp at the rear wheel . Looking at yours I’m not convinced mine has that much . Great video brother . :-)

[@hypermotardking]

@@davidalderson3095 You can only go on what the dyno says but 115bhp is strong. I hear most people get around 110-112 with full (decat) systems.. some air filter/starace and a map (upmap/rexer).. On these bikes Torque is more important to fly through the gears

[@davidalderson3095]

@@hypermotardking yeah and extra 10 on the reading you got is a big jump so I’m sceptical. It goes well though .

[@hypermotardking]

@@davidalderson3095 Thats why I went to 2 different dyno companies on the same day just incase one was unexpectedly high.. but for me having a 1.8bhp difference fair to say the power output is true 👍🏻

[@andreajacobs799]

why it has so much torque loss? ducati says that this bike has 96 nm of torque i dont understand why yours has only 68\9 wonderful bike btw

[@stevekelly6500]

@ Foot pounds & Newton meters are two different measurement. Torque is Excellent

[@hypermotardking]

The torque figures are fine..

[@hypermotardking]

@@stevekelly6500 Cheers buddy

[@chadbeets9852]

Is that Dominic Toretto??

[@hypermotardking]

😂😂👍🏻

[@tiffter171]

What tailtidy is on this?

[@hypermotardking]

Ebay one.. its a plug n play.. check my other videos ive done an install on it (you dont need the extra wires)

[@user-tn9qr1vi8p]

@@hypermotardking Have you had your bike MOT'd since fitting the tail tidy? I heard the indicators were illegal here which is why I'm skeptical about buying one too. Bike looks mint though buddy!!

[@hypermotardking]

@@user-tn9qr1vi8p New bikes dont need an MOT for 3 years.. when the time comes I’ll install the OEM one on and switch it after 👍🏻

[@user-tn9qr1vi8p]

@@hypermotardking hahaha of course they don't!!🤣🤣 I am an idiot. Thanks for sobering me up 👍👍

[@daytonasayswhat9333]

Why dyno and not tune it?

[@hypermotardking]

Always good to get figures and fuel ratios for reference before tuning - so others can decide if they need to. Information is key. Besides i tune it later (twice)

[@daytonasayswhat9333]

@@hypermotardking got you . I just figured since you were already there.

[@ericvondoodleburg8388]

Never saw a guy so into or obsessed with a motorcycle........for the money and time you put into it you could have bought a street fighter v4😏

[@ericvondoodleburg8388]

I own the same bike...........its not a super bike......it only has 114 horsepower for fucks sake!!!!

[@hypermotardking]

@@ericvondoodleburg8388 Power isnt everything.. 200bhp on a naked road bike is pointless.

[@ericvondoodleburg8388]

@@hypermotardking You obsessing about this bike on you tube is pointless..........go find a better hobby man.

[@hypermotardking]

@@ericvondoodleburg8388 The point of youtube is to provide content to people about a subject where there is little to no information - its not about obsessing. Thanks for watching

[@ericvondoodleburg8388]

Zzzzzzzzzzz😮

[@hypermotardking]

can’t please everyone but thanks for trying 👍🏻