DynoJet Carb Jet Kit Install Honda Shadow 1100 (UPGRADES PART: 2)

[@spanky522]

You don't need to get an after market jet kits for these bikes. All that is needed is one or two small washers under each needle to raise it a little to run richer. I put after market exhaust on my VT1100 Shadow and used one washer under each needle and re-adjusted the air mixture screws after synchronizing the carbs. It runs perfect.

[@GradeABeaf]

Painter D are you running a K&N? The better flowing filter will lean out midrange. At least for me it did.

[@spanky522]

I use Unifoam on an glued into an old paper filter frame (Yes, I removed all the paper) It's oiled like a K&N filter but does a much better job of filtering the air and it's washable too. The reason I didn't like the K&N filters is mostly the price and the fact that doing the research, I found they do not clean the air as well as the Unifilter foam does. My midrange is just fine and it feels like it really hauls ass.

[@AlexTBon4073]

Was it straight piped?

[@DOOM3DGUY]

@Malik Martin Hey man. How did you get on? Got my carbs on the bench and I'm wondering whether to buy or use a washer. Cheers.

[@nicotarantola6837]

Me and my buddies are taking a shot everytime you say "um" 😂😂😂

[@nicotarantola6837]

😂😂😂😂

[@drewhudson1296]

I’m late but you are just like me old fords and Honda shadows

[@jeffjlake]

You mention unscrewing the jet by turning to the right did I miss hear what you said :? are you sure I thought it was lefty loose righty tighty or is it like Mopar and is reversed thread ?

[@ThunderHead289]

I really hope I didn't say that. Yes, give her a turn to the left to get her off !

[@johnw6038]

I caught that too,glad it was clarified though I would of figured that out

[@ABCDEFGHIJKELA...]

Take a drink at every "Umm"! I dare you to make it thru.

[@ThunderHead289]

Look, sorry I wasn't a linguistic artist when I was in college. Like to see anyone stand toe to toe with me these days.

[@torolekristoffersen2591]

Hello. What pipes u got?

[@GradeABeaf]

Did you ever have any midrange misfiring or fouled plugs from running too rich? I have the same set up, K&N filter, drag pipes, stage 1 with 180 jets and needle on the 4th clip slot. My plugs are turning black from running too rich.

[@bgohio4591]

So did you keep the pilot jet stock?

[@carstrucksboats]

should be 170 jets with the 3rd clip slot

[@winnipegjohnston]

@@carstrucksboats 3rd slot of stock needle ?

[@tylarmorehead7381]

What about the tuning?

[@Paul-go6hs]

I just bought a 94 honda shadow vt1100 and the only issue i have is a gas leak from a gas line to the left side tha is loose (not connected to anything) if you could help i would much appreciate it.

[@MoBLuBSiAb4LiFe]

Do you have to put two different size main jet for the front cylinder and the back cylinder??

[@craighelzer1593]

Yes I did what the instructions said, I have a 2002 VT1100C2 or shadow sabre. Cobra pipes no baffles.

[@MrCokemaster05]

Shoulda took out the airbox an all that. Use Vstacks instead or intake. There a lot of stuff u can remove that u don't need. Like that clip thing u were talking about at the end. An all those hoses for the air box. Trash it.

[@TheSamplebridge]

what's the intro song

[@wylde007]

Eric Clapton - Layla.

[@surearrow]

>>-----------------------> Time to get a tripod buddy.

[@ThunderHead289]

buy me one lol

[@surearrow]

>>----------------------> Craigslist, eBay or a local thrift store is always my first choice for things like this. Here's a simple new one for under $10 bucks. Make sure you find on that fits your camera, i.e. iPhone, etc. www.ebay.com/itm/Mini-Portable-Swiveling-Ballhead-C-Clamp-Tripod-Stand-Desktop-for-Camera-DSLR-DV-/381809501171?hash=item58e59ea3f3:g:DocAAOSw-CpX~NIr

[@terrysmith8714]

Laya,,,um...um...just um...um...saying.

[@ThunderHead289]

Yeah ten years ago I wasn't the Public speaker I am now. Try and make a youtube video yourself sometime where your showing how to do something - most can't.

[@ScotianBlooded]

Wow glad I have a Harley lol

[@GradeABeaf]

Marcus Munn why?

[@terrysmith8714]

um,,,,um,,,,um,,,ummmm,ummm,,,,um

[@stevemaxon8796]

what stage jet kit did you install

[@ThunderHead289]

I installed the largest jets because I was running exhaust with no baffles

[@asswerty123456]

Stage 1 kit or stage 2 ?

[@kennypool]

Not up to your normal standard. You cut/skipped all the important parts. Big raspberries

[@ThunderHead289]

This was 10000 years ago. I’ve been around longer than all the other youtubers folks commonly think of

[@kennypool]

@@ThunderHead289 o.k. , you get a pass. I have the vt750 shadow. And the carb removal is a bitch. Happy riding, stay safe.

[@mabast007]

I haven't seen any work, you only talk... And you a tripod if you planning to make videos.

[@ThunderHead289]

Chris Samurai you could have just not had the info at all. Feel graced that I gave a damn to make a video since there aren’t any others.

[@mabast007]

FYI, I am looking to Chop It Garage channel.

[@ThunderHead289]

have fun - couldnt care less. if you cant do it/understand with what i showed you, i fear it will not be an easy path for you. i figured it out as i went. now in all seriousness and me putting my butthurt bullshit aside - just jet according to your pipes. it made a huge difference on this when i went to straights with the larger jet. completely different bike afterwards.

[@galvan311]

Link to the pipes?