E-flite Carbon-Z Cessna 150T 2.1m BNF Pilot Ryan Radio Setup

[@3DJunkie]

Cheers Mr Pilot Ryan that made my life alot easier , so thanks alot buddy , great video and well put forward Happy landings

[@ruger0962]

Perfect video. Very simplified and I'm new to nx8. Most other videos take the long road to a short answer.. I'll be subscribing here.

[@scottsettleproductions]

T is for TERRIFIC! Awesome!

[@T-Gill777]

Yes indeed that’s how I set up my radio which I am just a intermediate pilot so far working on being a expert gonna take me time just like learning the forward programming I have to apply what I learned so far the Avia programming is my next step for reversing thank u and your compadre I love these videos learning a lot quick✌️👍🇺🇸

[@boss2234]

Good job. will track you down at Muncy , will get there about 4:30 pm Friday. Good lord willing and the creek don’t rise, on the road now.

[@eddieksrc]

Great setup video Ryan!

[@kendonnelly3248]

shortcut to the switch selection on the 10. highlight the switch and just click the switch you want that function on.. Automatically sets it. Rather than scrolling. I also setup audio warnings on the safe mode. Nothing worse than taking off and trying to go into a knife edge and fighting the safe. Nice setup. I have one coming. Going to test fly with those settings. Thanks Pilot Ryan Happy flying!

[@jetman899]

Good stuff! Thx PR.

[@barrycampbell6117]

Great setup vid!

[@BadFishRacing1967]

Thank you so much for the video! So much better than the book. Now if you can tell us how get the get digital servos to stop buzzing, you will be my hero 😂

[@PilotRyanMedia]

Noisy for sure, they’ll quiet down a little after hinges relax after use.

[@paulmcneil5529]

Thank you for another good video.

[@EflightTimberx]

Very helpful

[@56corvette75]

Nice video, found it very well produces and educational. Keep flying!

[@davidsnyder238]

FINALLY!

[@jcb6713]

thanks for the info...

[@rcglory435]

2nd to LIKE -- LET'S GET IT ON!!!!

[@BDTennessee]

Good setup video! If you update radio,it has a option of "Link" (one setting for all position of flaps) or "Independent" (each flap has separate settings)for flap speed.

[@old-rcplane-phart]

That was/is a nice added update it needed! 👍

[@toolbaggers]

The Spektrum LED logo on the NX10 is too ghetto for the MSRP

[@old-rcplane-phart]

Did u download the online setup, or do it manually? (After almost a year of the templates, i quit. BY the time i reset all their backwards to me settings, i could have saved time doing my setup manually 🤪🤯!) Too, the v1 cz 150 (NO 'T'), tricycle gear, which way do i need to setup reverse? Free plane, no manual.

[@PilotRyanMedia]

I usually do it manual

[@old-rcplane-phart]

@@PilotRyanMedia Too much 'rearranging' for me. I used to be futaba or nothing for everything. Futaba really loves their recievers! 🤯 After over a year of getting back into flying, & learning spektrum, i like it! 🤪

[@jpap1059]

I’m curious. The manual calls for a brake force of 7 but yours shows 0. Is that intentional?

[@PilotRyanMedia]

Not intentional. I still do have reverse thrust. I’ll have to take a look at that

[@jpap1059]

@@PilotRyanMedia thanks for the response. I would like to know what you find out. It seems to work fine the way you have it set up but I am wondering why the manual has 7 as a brake force and if it makes any difference.

[@bcflyer99]

What's the difference between SAFE Select and SAFE?

[@PilotRyanMedia]

No diff

[@bcflyer99]

@@PilotRyanMedia thanks I recently noticed both in forward programming where you can turn on one buy not the other.

[@boss2234]

Do you have a link to HSD for the Cessna, Bitgo is out. 🤔

[@PilotRyanMedia]

Let me take a look. I’ll get back soon. I’m on the road for 20 more minutes

[@boss2234]

@@PilotRyanMedia no problem I will wait till tomorrow contemplating eflight or HSD will see where your at before pulling trigger on it.

[@PilotRyanMedia]

Here’s the link for Bitgo. It’s now in stock at both places. www.bitgohobby.com/hsdjets-2000mm-c-182-red-pnp?affid=2

[@boss2234]

@@PilotRyanMedia THANKS I will order tonight when I get home hate to be a bother.

[@boss2234]

@@PilotRyanMedia order is complete Thanks Through Bitgo.and your link.