E Ride Pro SS / EBMX X-9000 Installation

[@backwoodsbike8904]

Thanks for making this video. Just got mine installed- the torque is absurd!

[@joshjorgensen2476]

Great video. Very informative and easy to follow. Can’t wait to get mine.

[@tiggy1559]

Nice bike, cant wait to get mines just ordered mines last week, this one is nice with all the upgrades.

[@arniehenry5084]

You guys been so much help...ty

[@DeruginizCLS]

After removing the battery make sure to cycle the key couple time in the ignition. A lot of times there is still power in the system.

[@ChargedCycleWorks]

Very good point!

[@GazzaJollyRoger8152]

WOW, Awesome video! Thank you for sharing.

[@makten-cn8jg]

How do you get a warp9 horn button and gritshift headlight switch to work with it once the controller is installed? My x9000 v2 works perfectly besides headlight and horn. Worked before removing the OEM sport/eco/horn

[@Sherman1862]

I just bought the Controller for my E Ride SS Pro 2.0, I guess I don't even need or will not use the Harnesses that came in the box in the plastic bag. I just use the Blue Tooth and Thumb Throttle Connector, and the Hartness that came with the bash guard and side plates for SS Pro Skid plate? So really, all I need to do is connect eride harness, blue tooth, thumb throttle, disconnect the stuff on the bike and replace phase wires and positive, negative connectors, attach new EBMX Controller.. Disregard the other wiring that came with in the box? If that makes sense.. lol..

[@THECLIPSS666]

Is the bash guard a tight fit. I’ve had trouble getting mine on smoothly. The motor wires hit on the plate.

[@MCMedina]

Does the horn still work after you add the new controller?

[@makten-cn8jg]

Mine doesn’t

[@Luke_ride]

Yes

[@DJBRAND-X]

Good informative video. I’ve been looking for a video on swapping out the stock kickstand. Haven’t found one yet. Know of anyone that’s done it? I’ve been trying to figure out how the linkage to the safety feature is connected. 🤙🏾

[@tumbles94]

Thanks for the video it helped me a bunch installing my controller. I did reuse the red and black wire eyelet covers on the old harness for the new positive and negative leads at the controller to protect the fitting so they would not short out. The negative does not matter as much as the main positive lead. Do you know if there is a way to see the percentage of battery power left versus just the battery icon with the bars like a phone? I know the factory eride would show a percent left and was looking around in the menu for that. Good job on this BTW!

[@ChargedCycleWorks]

On the egg rider display it goes off of voltage which is much more accurate than a percentage. 72v batteries go dead at 62V

[@gabrielabelha4044]

If I put this controller on my eride pro s would I be able to put the ebmx motor with it?

[@Sherman1862]

Would a common blow drier work instead of a heat gun to waterproof the Heat Shrink Wrap? thank you! I/m about to buy that Controller from Charghed! : )

[@ChargedCycleWorks]

It will! It may take a little longer, but I use a hair drier quite often on my graphics kits at home

[@Sherman1862]

@@ChargedCycleWorks Thank you!!! Just bought the Controller. Prob get it Friday maybe. Can I just leave head light and horn connected as is? or need to unplug and reconnect into MBMX9000? Happ New Year 2025 to you and Charged Cycle Works!!! : )

[@EmotoModsAndMore]

Bro what if someone Hacks your controller on your bike and messes it all up ? Couldn’t they just get the app connect to your bike? Is there a passcode or something

[@VincentJohns-yg2vy]

Yeah they get my key, turn my bike on, download the ebmx app and mess with my settings, turn the bike off , put my key back and I end up getting on and crashing cuz they hacked my bike. I’m glad u brought this up so I can deploy counter measures. You’re a life saver bro

[@Ebbrush3]

what about the battery upgrade ...chi battery sys has a 60Ah available

[@melbournechugging2999]

Has anyone seen those EVF XL Frame Extender it's sold only in Europe wonder if charge cycle works could do a review on that.

[@themountain59]

Awesome software ❤

[@rans4339]

Amazing bike in a few days i will buy it with the x9000 but i want to ask where did you get that beautiful wrap kit so i can also built my bike just like the video cause i love it❤

[@ChargedCycleWorks]

We sell them on our website! Feel free to check it out and let us know if you would like one!

[@rans4339]

@@ChargedCycleWorks hey took some time to answer but i saw on the website that this specific color that you have on this video (that i want) is only for the surron lbx and talaria should i buy it cause the lbx frame is the same with the eride pro ss 2.0 i think atleast thats what it looks like ohh and also iam in greece do you guys have international shipping?

[@DeruginizCLS]

So I bought a EBMX controller for my Surron and never put it on… with the same kit work for the eride pro? I’m thinking of ordering eride pro instead.

[@ChargedCycleWorks]

Same controller will work, you will need to purchase the E-Ride Pro adapter kit separately

[@DeruginizCLS]

@@ChargedCycleWorks perfect, I bought the controller from you guys like 2 months ago. Only opened it to look at it. That’s good to hear thanks!

[@MartinLazalde-x2i]

What's the wrap called

[@Bengy22]

On the power levels, is 15kw / 600 phase the max one should set?

[@ChargedCycleWorks]

Yes, that is the max recommended by EBMX. There is a pretty wild amount of torque with that!

[@bonesx13]

How you doing guys. I'm having a hard time getting my eride pro ss to work with the x9000 v2 kit. It only turn on for a few seconds and then turn off and would not turn back on. Bike is 2 weeks old all stock I followed ur guys video to the dot and was not successful. Any tips ? I did notice that when it turn on, on the screen showed the battery icon flashing blank, I know for a fac the battery if fully charged and functional sense I rode the bike before starting the control swap.

[@dillonschneider6862]

Im having the same issue I dont know how to fix

[@bonesx13]

@dillonschneider6862 Whats good bro. I just finished putting the bike all back to stock and NO PROBLEMS. Bike works like a champ. Now I'm going to do literally plug by plug, leave all sensors, minus brake sensors, and speed limiter. I think I know where the problem might have happened so 🤞 and hope I get all lights on and stay on. We'll keep updated

[@bonesx13]

update... no luck I've triple checked all connections and everything is to a T... when I flip the breaker after plugin in the battery i get about 5 seconds of lit up ebmx screen but then it shuts off and nothing, unless kill the breaker unplug the battery then plug battery back turn breaker on and turn the key on and i get screen for 5 secs and then got 2 repeat the cycle. I have a hunch that the controller might be pre program for a whole different setup and it turn the bike off.

[@bonesx13]

OK, I found the solution for mine. Let me know if you wanna know what it was, see if it helps you out

[@dillonschneider6862]

Yes please let me know asap. I’m trying to ride this thing!

[@Canamfishinghunting-etc]

Do you need to install the regen throttle?

[@evo_elite_tv]

"?

[@dylansala87]

No

[@boomhowre]

I thought for some reason battery current limit should be set to 150 amps?

[@phat56pat]

Correct

[@ChargedCycleWorks]

Correct: Battery Current limit is 150 Amps, Phase amps can go up to 600, and Kw can go up to 15

[@Crohniac]

@@ChargedCycleWorksis battery amps not directly correlated to kw? 150a would be 10800w

[@THECLIPSS666]

What’s a good supermoto set for the eride pro I’m trying to get some

[@Tieu23]

Cant go wrong with warp9 but I like milkracing a bit more

[@ChargedCycleWorks]

The 17” warp 9 supermoto’s are top tier, let us know if you want a set!

[@THECLIPSS666]

@@ChargedCycleWorks dose it matter that the rotor is different in mm from the front to back from 1.8 to 2.3. Will they both work

[@ChargedCycleWorks]

@@THECLIPSS666 They will, you will need to push the caliber pistons back in. then after reinstalling and centering the brakes on the rotors squeeze the brake until the pads meet the rotor and you'll be good to go.

[@1smacks116]

I installed this controller on my ss with stock battery. I can only go 46 mph tops with a 50 tooth sprocket. What gives?

[@mickeymartin1528]

I had the same issue. Several things I had to do, adjust field weakening to 100. Make sure I had the stock battery chosen and not the EBMX one (like in the video) and then I recalibrated the encoder and then throttle and thumb regen again. I’m sure I did it out of order but went from 46-60

[@1smacks116]

Yeah, messing with field weakening did for me. Thanks for the reply

[@er_ave90]

Can I install this controller on mine stage 2 M1

[@ChargedCycleWorks]

Sadly ebmx has not set it up for that bike as of yet. They are working hard to get every bike that survives in the Emoto world tuned

[@er_ave90]

@@ChargedCycleWorks thank you I appreciate it I’ll keep waiting till it happens

[@Eridepro_Luis]

Can you do this for me😭

[@ChargedCycleWorks]

We absolutely can if you schedule an appointment with our shop

[@coltonrumsey6529]

I wish the controller was thinner

[@outon2s]

Nawww I like it sticking the frame looking sic!

[@AndyWong-l1t]

Hi Brian and Nathan, Please check your email. You have received a business collaboration invitation from a new dirt bike brand. Looking forward to your response.