E RIDE PRO SR 25KW BEAST #unboxing
33:25
E Ride Pro SS 3.0 IS HERE!!
17:22
Пікірлер
@dcweber1
@dcweber1 49 минут бұрын
If you guys are a Surron dealer, why don't you show any models in your Bike category?
@dcweber1
@dcweber1 51 минут бұрын
Could anyone send me the official Surron USA website URL so I can find a dealer near me in Ocala Florida?
@Joshdrinkswater
@Joshdrinkswater 8 сағат бұрын
Would you rather have this or the fast ace gravity?
@thethrottleculture
@thethrottleculture 8 сағат бұрын
my sr is out for delivery and should be here in under an hour. i’m going to watch your video to build it!
@xhdultrawalk
@xhdultrawalk 9 сағат бұрын
Altis sigma is $5500 and runs just as fast as a KTM 500. KZbin it.
@macd3394
@macd3394 11 сағат бұрын
Will the tip sensor affect wheeling?
@freeze1305
@freeze1305 22 сағат бұрын
The way the seat secures to the bike is really awful. You have to carry tools around with you if you want to be able to take the seat off while on a ride...
@lukeroberts5501
@lukeroberts5501 23 сағат бұрын
Any alternative to the seal grease used when sliding the tubes back together?Can white lithium grease work or regular automotive grease? Cant find that particular grease anywhere plus id like to use stuff I have already rather than buying some especially that it needs so little.
@jerryricketts6032
@jerryricketts6032 Күн бұрын
Was gonna buy one. Tis out of stock with no estimate on delivery
@thethrottleculture
@thethrottleculture Күн бұрын
Mine is coming tomorrow! can’t wait
@russkielol
@russkielol 2 күн бұрын
I am 6.2 180lbs how is this going to fit me
@EMotoRiders
@EMotoRiders 2 күн бұрын
👎 Chinese 🇨🇳 Ventus 👎
@Bryan-x8l
@Bryan-x8l 2 күн бұрын
hey this may be a stupid question but i haven't bought one of these lightweight e-motos.... but... what side is the throttle on? and what type of throttle is it? Do you pull the hand grip back on the right side? Or is it that lever looking thing on the left side? Just curious man. Thanks
@4theFiero
@4theFiero 2 күн бұрын
Great video, I really can't believe I've been putting this off for so long Looks super easy. I'd like to see a video on the OE surron light bee KKE fork.
@grinkle976
@grinkle976 2 күн бұрын
what e bike would u reccomend for someone who is 5 foot 5 too 5 foot 6. i have been looking at the Talaria Sting MX5 Pro but not sure since my height if it would be a good fit or not what are your thoughts?
@26keifer
@26keifer 2 күн бұрын
Great video! Any idea what weight fluid is in the new ERide Pro SR front forks? Mine are very soft. ALX32RC forks Also the amount of oil? Comes with a 60lb spring, hoping I can get some stiffer springs soon. When will yall offer? Thanks!
@Alan-l3i7d
@Alan-l3i7d Күн бұрын
How many miles do you have on those brand new SR forks? Have you tried simply adjusting them?
@26keifer
@26keifer Күн бұрын
@ 30miles, yes
@AngelOrtega-r1g
@AngelOrtega-r1g 2 күн бұрын
Is anyone really not gonna fall for this bike with the NEW PRICE TAG $5800?!?!?! That does not compare to the Eride or any bike with this coming fully upgraded controllable or not this is at hand power OTB for $5800🫠
@gabe1392
@gabe1392 2 күн бұрын
thank you!!!!! very similar to my street bike fork but way easier and no special tools. very informative.
@Ebbrush3
@Ebbrush3 2 күн бұрын
awesome ...thanks ...easy squeezy
@MarkFries-o7n
@MarkFries-o7n 2 күн бұрын
Another great instruction video!!!
@carlborgen
@carlborgen 3 күн бұрын
Also, big thanks for your extensive list of tire weights and fitments for the surron!
@MoxyDave
@MoxyDave 3 күн бұрын
Great video, thanks! I recently performed this service on mine. The FastAce manual "ALX13RC_MANUAL_SEAL_REPLACE.pdf" calls for 300ml 5w in the Damper side (Right leg), and 150ml 32w in the Spring side (Left leg). I used 7w for both initially before I found the manual then replaced the oil in the spring side with 30w. Didn't make a huge difference but it was a noticeable improvement. Great idea with the adjustable pliers on that top nut. Never seen a nut like that before. Wish they would make that a standard 12-point. Otherwise they're pretty decent forks for the average rider like me.
@jcbrownfield4005
@jcbrownfield4005 3 күн бұрын
On the gouge in the stanchion, on mountain bike forks with such damage a little smoothing and filling the gouge with something like nail polish was often suggested to help smooth the interface with the seal, but you recommend doing nothing?
@Bigmannature
@Bigmannature 3 күн бұрын
What weight fluid would u recommend using for ur guys fastace with a 200 lbs+ tune ?
@ChargedCycleWorks
@ChargedCycleWorks 3 күн бұрын
7wt unless you want it really heavy/slow then you can go to 10
@MoxyDave
@MoxyDave 3 күн бұрын
I used 300ml 7w in the Damper side (Right leg), and 150ml 30w in the Spring side (Left leg). I'm about 215lbs ready to ride and this feels good to me. If you jump huge gaps these probably aren't the forks for you but for everyday riding this is a good place to start.
@Bigmannature
@Bigmannature 3 күн бұрын
@@MoxyDave I am 220 and the forks did great with stock battery and motor but now I am 72v and tm25 motor the extra weight makes the forks struggle just blowing through them now even on max compression and faster rebound
@Negern91
@Negern91 2 күн бұрын
I use a 50lbs spring and 15wt in mine😂😊
@josiahestabrook5257
@josiahestabrook5257 3 күн бұрын
It's not a nic that makes them leak. I got mine brand new in the box leaking from you guys, it's the assembly grease on the dust seal that pushes its way up in the oil seal, causing the oil to leak out. I cleaned all the grease. Reinstalled, everything refilled with fork oil and it hasn't leaked a single drop in over four months since doing it.
@ChargedCycleWorks
@ChargedCycleWorks 3 күн бұрын
It's possible the grease from the factory might be causing an issue, that's the bad thing about Chinese made suspension is they are not using high quality grease and fluids like Sirris or EXT or other quality brands. Just swapping out to a quality fluid is a difference that you can feel.
@lukeroberts5501
@lukeroberts5501 23 сағат бұрын
Im about to do mine and wanna avoid this problem, can you explain what you mean a bit more. You saying there is grease on the seal from when they are made and you cleaned them off before install? What did you use to clean them? And did you add more grease before sliding the lower tube in?
@yevgeniylankin7032
@yevgeniylankin7032 3 күн бұрын
Bookmark for most fastace owners.
@lakeloon
@lakeloon 3 күн бұрын
Where is the best place to order one? From a dealer or straight from the Eride company? Thanks.
@adrenaholic1
@adrenaholic1 3 күн бұрын
Any chance the Chain sprocket is any smaller in diameter than the belt sprocket? I have a Rerode R1 and the belt is rubbing the suspension linkage under the jackshaft sprocket.
@zicmu6879
@zicmu6879 3 күн бұрын
Thank you for your work!
@hottoma
@hottoma 3 күн бұрын
Also if this bike gets muddy or dirty how do you clean it
@hottoma
@hottoma 3 күн бұрын
Is this a two seater bike?
@MissedFGC
@MissedFGC 4 күн бұрын
does anyone know if this fits the altis sigmamx
@Armac-Piano
@Armac-Piano 4 күн бұрын
if the altis was bigger i would buy it
@Brue58
@Brue58 4 күн бұрын
I seen a video where the new eride pro sr has a thin front hub, did they upgrade the hub on this bike, let me know thanks
@Brue58
@Brue58 4 күн бұрын
The hubs are thicker now right not like a surron front hub, correct let me know thanks it looks thicker, thanks
@MG-py9gb
@MG-py9gb 4 күн бұрын
Eride has more power and Talaria has better components/reliability. Depends which is more important to you. I do sometimes feel like the eride pro has just too much power, specially the SR. They should spend more on the reliability and brakes etc. Instead of just more and more power imo
@jaydendrent4575
@jaydendrent4575 4 күн бұрын
Where can I buy these wheels for the mx5?
@devinjack7606
@devinjack7606 4 күн бұрын
Please Can u tell us about the regen button? Compare it with the regen thumb throttle of the sr?
@ApexRR1
@ApexRR1 4 күн бұрын
Thank you deciphering the Rosetta Stone! I’ll be referring to this video often going forward.
@rambojohn7118
@rambojohn7118 4 күн бұрын
Great video to follow when assembling the bike. What gauge wires are used on the battery and what connectors are those? Why did they split up the battery connection into two instead of having the same type of connection as the 3.0 and line you see on most other emotos ?
@mrKushmann1
@mrKushmann1 5 күн бұрын
You can tell Bret hates a talaria. He even complains about the grips. Why even ride it. You already know you’re not going to like it. Brett only likes Jack shaft bikes period. Anything different than a Jack shaft he don’t like it. And you can tell how biased he is from the beginning of any video with a talaria in it. Always complaining about something with it. You should have someone else do reviews on any other bike other than a Surron or an ERide pro. We already know Brett is not going to like it And we get it you don’t like the Talaria Grips.
@mrKushmann1
@mrKushmann1 5 күн бұрын
How are they know for throwing there chain? That’s absolutely not a true statement. Only on a gas bike. The chain tension does not change with the suspension travel. So how can it throw a chain.
@mrKushmann1
@mrKushmann1 5 күн бұрын
This was not a fair test. You changed the rims on the mx5 and the 21/18 rim setup does not work correctly on the bike. It needs a drop crown to work properly. If anything you should have done the 16 in rear or to make it fair do the 18in rear on the talaria and leave the front 19. That would have made it more fair of a comparison. You modify the Talaria and then say you don’t like it. You should have never modified it to make a comparison test because that’s not how the bike comes out of the box. To do a real comparison test, the bike needs to be equal or the same to start like a brand new E ride pro and a brand new mx5. And why would you put a 21 inch rim on a bike that can’t fit that 21 inch rim making the front wheel bottom out on the bottom of your fender. Of course you’re gonna say you don’t like the way it rides I mean, who would say other. Brett always wants to put a 21 inch wheel on the front and that’s fine but when you’re doing a comparison video make the video comparable
@ColoCruise
@ColoCruise 5 күн бұрын
Thank you for this tire orientation for 16/19 e-moto tires. Are any of these DOT for those of us that ride roads between trails?
@ChargedCycleWorks
@ChargedCycleWorks 3 күн бұрын
The Shinko 241 and 244 are both DOT approved tires.
@mrKushmann1
@mrKushmann1 5 күн бұрын
Why would Bret say the Talaria needs the chain guide? Any emoto that the chain does not change tension does not need a chain guide. Unlike a gas bike the chain tension does not change with the suspension travel so your chain should never come off. So the chain guide it an unnecessary option that only makes the bike sound clunky. That is unless the bike’s owner does not do there bike maintenance and keep there chain at the correct tension.
@toddprifogle7381
@toddprifogle7381 5 күн бұрын
Why couldn't they all be 5 mm Allens ?
@Bacon676
@Bacon676 5 күн бұрын
The only real difference is the wheels? Wrong. Dead wrong. There is one reason the Talaria is superior in every way: it has a gearbox, and doesn't rely on crappy belts to drive a jackshaft across the swing arm through extra bearings externally. The SurRon is a dinosaur now because of that stupid belt-to-chain jackshaft design, and the e-ride is just a Surron under another name. Either get the Talaria, or a Sigma. They use a transmission, and they're mechanically more reliable.
@dancor8380
@dancor8380 5 күн бұрын
Are they riding mtb trails? 🤨
@ChargedCycleWorks
@ChargedCycleWorks 4 күн бұрын
Private property
@High_strung
@High_strung 5 күн бұрын
When does the riding video drop??
@maibalzich7602
@maibalzich7602 5 күн бұрын
Soo weird not hearing much noise from them but there hauling ass😂.