E-Z Commmand Part 4

[@jcurtisp]

YES Directions in any number of DCC books. All three legs are wired through the module. Whenever a short occurs, the module reverses the polarity of the feeder.

[@3riversrambler]

Now if only the switch were automated as well

[@seaboard18]

You can buy a DCC On board switch and flip it using the controller!

[@FS2K4Pilot]

Would it be possible to use the reverse loop module to set up a turning wye?

[@CarmineRC]

Any chance of coming out with an anti derailing feature, like O scalers have enjoyed for decades? It could be a simple circuit, on each turnout leg, that always aligns the switch to the direction of the entering train. ...... It may be a world exclusive if you did!

[@jamurphy8386]

I'm surprised there has been no response to this.....

[@farmerdave7965]

4:30 Did he disconnect the cord by pulling on the red cable ? Not good !

[@VRDenshaOtaku]

It will Reverse the polarity of the Neutron flow

[@Sebdamememan]

Does the power booster work with analogue trains and controllers???

[@pauwanstrainworld6885]

Umm mr bachmann I have a question can I put the wire on the boaster to walthers scenemaster railroad crossing

[@mitchellbeardshall6305]

how do you program electric momentum?

[@josephjsellarole]

you can't (i think)

[@dunkfunk82]

If i cant use the reverse loop module for dc trains, then what else can i use?

[@digitalsoldierxp9027]

How do you put the bare wires into the track when it has a plug in

[@shanetombyll4805]

it says only make one conection to track with booster wouldnt you need to run feeder wires?

[@Speedlaser-fo1vi]

Anyone know if Dcc engines can be run without DCC controller?

[@sandwichgod7514]

they can.

[@thevikingwolfpack836]

Will this booster work the threw regular power pack instead of the dcc one.

[@ComoCo77]

How much is "many locomotive consists" ?

[@traintimeboy]

2

[@fiercetrains4052]

what about a wye?

[@blackstone1a]

just realized the layout is that 4x8 maddison central one

[@inscoredbz]

i don't see why it wouldn't work with dc engines as well. all this auto reverse module does is change polarity when a shor occures.

[@CarmineRC]

inscoredbz - The DCC power signal is similar to AC power... A DC input would either make it not work, or burn out the unit. There is nothing really similar between DC and DCC!

[@cunhafixit]

Dc trains control their direction by polarity, so it would change the direction of the train when it switches polarity. The train would go backwards when it hits the second isolator, and get stuck in the loop.

[@SouthernRailPhotography]

does the booster work with the Dynamis?

[@dunkfunk82]

Yes. The controller is not connected to the automatic reversing unit. Of your talking about the 5 amp power booster, then i dont know

[@thevikingwolfpack836]

does it work with the bluerail trains?

[@BachmannTrainsUSA]

No this is DCC not Bluetooth control. Bluetooth locos are controlled by a smart device.

[@aidensypolt]

I never did it before

[@Daddymouse-ny9cz]

First 3 vids, no problem. No. 4, not compatible with my ol' XP. WTF.....!