E3 Rebuilding a $750 Marketplace Tandem Axle Trailer - Spare Tire Mount Welding & Fabrication

[@BrandonLund]

AWESOME TOOL BUILDS! kzbin.info/aero/PLfbf78fMz9Vo2Cv3V5fmYlDZGpS8Hp98l $25 Aluminum MIG Conversion kzbin.info/www/bejne/fHjLhKJuZ7KDb7c 21 Volt Cordless Grinder amzn.to/3NBOyJ8

[@DougLovejoy]

Yes!!! Back to the trailer!

[@davestewart9146]

I made a similar spare tire mount for my trailer years ago, I also left some space behind the tire so I could use a spare tire cover, we have three dogs, two that came from the shelter, love them to death, great video my friend 👍😁

[@BrandonLund]

Thanks man. Shelter dogs are special. I think they know down deep they were given a second chance. I like your spare tire cover idea. I wished I remembered to mention in the video, but I'm going to simply use one of those mag wheel locks to secure the wheel. Probably put the 3 remaining others from the kit on the rest of the wheels. The spare is the easy one to get though.

[@davestewart9146]

@ because of my ocd I also put together a toolbox, I had an extra scissor jack, added a proper size lug wrench and wheel lock socket and anything else I could think of such as wire for lights, electrical tape, wire nuts basically things I could make repairs away from home, I take it with me when I’m towing my boat or utility trailer, we have four vehicles that I can tow with all different lug nut sizes and jacks

[@BrandonLund]

Are you sure we're not related? You sound a LOT like me. I hate not being prepared for ANYTHING

[@jeremynelson541]

Use a tapered nozzle for those tight areas. I used to keep a nozzle, tip and diffuser all together in my toolbox, just for those tight areas

[@BrandonLund]

Great tip! I will look into

[@jmac3163]

That mount looks great. I had a friend that mounted a complete trailer hub assembly to his trailer for his spare tire mount. He had a spare hub, race, bearing, tire, basically anything that can go bad if he needed it.

[@BrandonLund]

Funny you mention this! I ALMOST went that route! It's a great idea. My brake hub assemblies won't be here until January, or I would have :)

[@Tubeagrutis]

Awesome, Brandon! Looking great! Can't wait for the rest of the series.

[@BrandonLund]

Thanks man I'm glad your enjoying it. It should be pretty decent when it's done

[@Weldon-c2t]

Another great video from Australia

[@BrandonLund]

Thank you very much!

[@mikeoatman1771]

great stuff always look forward to Friday's videos

[@BrandonLund]

Thanks Mike!

[@Coreyb83]

Looks great, nice work! I had sent you an email about a potential small Honda Big Red project. Thanks Brandon and Happy Holidays!

[@BrandonLund]

Thanks, man, same to you! If I haven't replied, I'm sorry. I will check my email shortly. I don't check it as often as I should.

[@Coreyb83]

That’s quite alright, thank you!

[@JeffreyTalde-y6i]

Great vid

[@randiegadberry5448]

Thanks for the great idea! I’m definitely going to put one on my trailer.

[@BrandonLund]

Right on!

[@jakeschisler7525]

I have Dewalt tools and years ago bought a jigsaw that rain on 18 volts, so I bought the adapter to use the 20 volt batteries. Another piece of equipment is hedge trimmer by Ryobi and those 18 voltage batteries wouldn't last so I bought an adapter for it to run Dewalt battery. You could buy a lockable lugnut for that spare tire.

[@BrandonLund]

Those little adaptors are awesome. I like your idea with the lockout. I'm pretty sure that's the route I'll go! 👍thanks man!

[@donaldsowers7961]

Great video! Super informative

[@BrandonLund]

Thank you Donald!

[@phillipkirbow8567]

Really nice work.

[@BrandonLund]

Thank you Phillip!

[@olddawgdreaming5715]

Thanks for sharing with us Brandon. Turned out really good. Stay safe and Merry Christmas to all. Fred.

[@BrandonLund]

Thanks Fred and Merry Christmas to you and your family!

[@donaldhalls2189]

Great job, looks like it's stong enough ,thanks for sharing, all the best to you and your loved ones Merry Christmas and wishing you a great New Year

[@marcelknippers9591]

Fabulous wheel-mount and what a sweet dog. I am very fond of dogs. It's time to get one myself. There's a saying that you get older with having pets. Love the way how you start creating a sketch(simply on paper) and have an amazing result. Respect Brandon...Great trailer which is going to look like new again... Greetz and Merry Christmas from Holland..😀💯🌲🌲🌲🍀🍀

[@BrandonLund]

Merry Christmas Marcel!

[@jimmacsuga2592]

That was such a good and useful way to mount a spare!!! Could you have switched to stick for those inside welds??? Love you watch you work. Be well, be safe, be Blessed!!!

[@BrandonLund]

Thanks Jim! Great suggestion! Stick would have been perfect in that application! 👌 Merry Christmas and blessings to you and your family!

[@rogertaylor8615]

That came out super nice merry Christmas to you and your family

[@BrandonLund]

Thanks Roger and same to you and your family!

[@christianbos1691]

Hey Brandon, great job man and perfect solution for the spare tyre. Your table is also awesome, stay safe and take care of yourself, have a great weekend and greetings.

[@BrandonLund]

Thank you Christian and Merry Christmas!

[@nathanpullin467]

How do you get the sharpie marks off the table? Nice work too.

[@BrandonLund]

WD-40. Thanks for watching man!

[@nathanpullin467]

@ Yes sir Thank you for making them for us.

[@loghauler3069]

Where did you buy the digital level?

[@BrandonLund]

It's an older craftsman 10". Probably discontinued.

[@dagorithe]

Finn sounds a lot like Charlie (10 months old). Everything goes in ilia mouth as well.

[@BrandonLund]

Hopefully it stops at some point lol