e6013 (2.6mm) vertical welding rod amperage (thin square tube)

e6013 (2.6mm) vertical welding rod amperage (thin square tube)
#welding #howtoweldforbeginners #verticalwelding#amperage#thinsquaretube

[@UKpolitoons]

Well done for uploading this. Amperage seems high as it burned a hole at the end but pulling back at that point might have avoided it. Learning curve for all who have never done it as its pretty good you got that far. Im not gonna be someone who laughs at the work because its actually cool you uploaded it for people to see technique as it grows. Youre getting there so again well done!

[@VarlMuN]

i watch other video he show the right amp for 6013 he say/show 70~75amp. the weld is clean. this video is in the recommended right amp 👍🏼

[@weldingbilgin]

Kolay gelsin 👏🇹🇷

[@StickWelding]

Çok teşekkür ederim, umarım siz de her zaman başarılı ve sağlıklı olursunuz🙏

[@wagadwagad9917]

10/10

[@StickWelding]

🙏

[@ntsenyhunkemp8622]

Improve your welding skills first

[@StickWelding]

thank you for the advice, this is a special motivation for me🙏

[@leeandmandybattersby5958]

Isn’t that galvanised steel that ant good for you 🤮

[@StickWelding]

yes, of course, my friend

[@calipcasi567]

😂😂😂😂

[@shawndungan9330]

Several serious mistakes. 1. Amperage is too high for the thickness of metal you are welding. Turn it down to avoid undercut. 2. Work angle is wrong. Angle the rod so that the heat is directed toward the thickest part. 3. Whip and pause is not a proper technique for E6013. Drag or push the rod through the entire process. The constant tacking you're doing looks terrible and would get you fired from a jobsite day one. 4. Don't preburn your end, it will give you very poor start of your weld. 5. Stop putting videos about 'tips' on facebook. You're showing new welders very bad habits that will cost them jobs. Pick up a book and practice laying beads withe entire rod and don't crush a second rod to use as 'filler material.' Very poor craftsmanship overall.

[@hunterestt5473]

There is always this type of guy 🤡 , bro just stfu if you don't like it just skip it.

[@mutd18]

This is so embarassing