Eachine EV800D Fatshark Mod // 3 Wire Mod Install any Fatshark Module Eachine Ev800D

[@DroneMesh]

EV800D FPV GOGGLES MOD Video www.banggood.com/Eachine-EV800D-5_8G-40CH-Diversity-FPV-Goggles-5-Inch-800480-Video-Headset-HD-DVR-Build-in-Battery-p-1180354.html?p=CS101558118042016088& Wires For modding www.banggood.com/30cm-40pcs-Female-To-Female-Breadboard-Wires-Jumper-Cable-Dupont-Wire-p-90154.html?p=CS101558118042016088& Ts100 SOldering Iron www.banggood.com/MINI-UpGrade-TS100-Digital-OLED-Programable-Interface-DC5525-Soldering-Iron-Station-Built-in-STM32-Chip-p-1021266.html?p=CS101558118042016088&

[@BernRex]

I refuse to pay 500 for the latest fat sharks. F those guys. mods like this are the real fatshark killer. nice work.

[@ArchmageAU]

Great work. Like how the mod is reversible (non-destructive). Can see this helping people.

[@kool-k-kel]

will this mod produce a blue screen when reception is lost ? on your module ...i.e does it fade to white noise/static or just blue screens you...= crash!!! thx guys great mod, ive read through the comments and this issue is asked a few times , with no answer... cheers

[@mssippijim]

I have a friend who's internal receivers are great in the EV800D, mine, on the other hand suck. Thanks for the mod.

[@skydogfpv]

Mine seem to be awful as well... did you do this upgrade?

[@Asu01]

The AV in port looks like a 3.5mm port. If so, you can take an advantage of the third unused pin as power output, thus no dangling wires and neater look. And oh yeah, love that JB style "I'm from the future" correction.

[@hanquah]

Can i use av and plug directly thru the av input. So no need for wire? I plan mod the crap out of this 800d

[@Asu01]

Probably, @@hanquah. I don't see any reason for it to not work.

[@hanquah]

@@Asu01 thx for replying bro

[@cliffcurry5264]

@@hanquah hows the mods going?

[@RiteshSeth]

So, did the AV port Mod work for adding the FatShatk module to the EV800D googles?

[@francisroan]

Would have been so useful if the blue screen doesn't come on when there's no signal. But I guess that's the issue of the FS receivers. They kill the output when there's no reception. That's really bad when you're flying and you suddenly get blue screen instead of at least some level of static so you can make out something.

[@harryfp1494]

I seen in a different video that you could fix that issue

[@jcofpv]

@@harryfp1494 which video? I'm planning on doing this mod

[@Drzeq]

The link to the FatShark module from the EV800 video is dead, is it still obtainable? Is it possible to do the same mod to work with HDZero or even DJI? Are there simmilar modules available for these systems? I'd greatly appreciate if you could share links to such modules. Thank you, you did a great job with this video, I'm new to the hobby and to the soldering, but I'm sure I'd be able to do it myself. Cheers!! :)

[@SapekQ]

Is it possible to get audio since we are using the av-in/audio connector?

[@paulpark4899]

Can i use the rapidfire module? Or like can i use ANY fatshark module?

[@bennedictbyy]

What is the purpose of installing Fat Shark Modules?

[@ulissesmuniz]

Better reception

[@tomfunk7514]

Thanks this helped out a lot great video. I had some very slight bit of fuzzy or grainy video in mine so I used a shielded wire and removed the yellow and now its clear as day. Thanks again. I also did a small fan on mine just under the rear part cause my glasses would keep on fogging up and wired it to the external battery plug. Now no more fogging.

[@shattereddnb3268]

Simple and genius! Do you know what the rest of the unused pins on the module is for?

[@MCsCreations]

FANTASTIC work, dude! 😃 Yeah, those goggles are awesome! Super comfortable to wear too! And, please, try the DVR! But put the internal modules in a different channel first, to get only statics, to be sure it's recording the AV in. 😉

[@kral5932]

The ev 800d do record av in. I have used a 1.3 reciever with av in and it works

[@MCsCreations]

@@kral5932 Awesome! Thanks! 😃

[@giga18116]

@@kral5932 i have troubke to instal 1g3 on this. Suspect that gnd wiring has something to do with it, or ntsc/pal issue.. or just faulty receiver. Im going mad :)

[@kral5932]

@@giga18116 not sure sorry, i switched to fatshark hd2

[@elbedouirayen7938]

Please can the rapidfire work the same way?? Thank u

[@major751]

Nice video. Um, wouldn't it be a lot easier to put the negative and video wired onto a AV jack then you could just plug it in and take it out whenever you wanted? Then do a plug off the 5v so again you could just plug it in? Just a thought.

[@playmatee1]

Is there latency difference with them ? Also where is the 5v regulator and right pin or scheme , that should be the best place i think ,? ((or itsuck power from the screen, i don;t believe.)) ??

[@Memento86Mori]

Cool man. I think I may put the some electrical tape on the back of the screen to be just extra carefully. Not necessary but maybe give some people alittle peace of mind

[@BenjaminClemons]

is there a way not to get blue screen when you loose reception and to get static ?

[@Qubnix]

What do you think about adding second fatshark module and make quadversity? Will it work with this gogles software?

[@mssippijim]

You mentioned a blue screen with no signal present...does this happen when signal drops in use? If so, it's a deal killer.

[@eternalfpv9461]

This is a great question. I'm wondering too

[@nejcosolnik9749]

Yes, when signal gets very weak you get a blue screen.

[@gombi77]

What is the solution of the problem??

[@kral5932]

NIce video, just a few questions before I do this. 1. Does the av in still work if you route the wires differently? 2. When using av in I notice the goggles have bluescreen. Is this a big issue? 3. Is there a lot of added latency? Could you maybe test it?

[@RCinginSC]

I feel like I can answer this. Yes, the av in will still work if you route the wires differently. If you leave the jack open and you can still use it to plug in other av compenents . You must unplug module first though. Second, the blue screen is normal when av in is selected with no input . Once an input is given , it will display. Third, there should be no added latency. All the Google is doing is internally switching inputs. Hope that helped.

[@Everett-xe3eg]

There is an open 3.3v pad on the board. The RTX6715 chips(inside our favor rx5808 modules) runs off a stepped down 3.3v. It will work fine off the 3.3v open pad near the second antenna.

[@aidelis7]

Great tutorial! I will do my best to follow your instructions and not fry my goggles! Well done!

[@illpro2]

Might as well go all the way and have an external 1S Battery connected to a voltage step-up module to power the fat shark module. Then connect with a modded AV cable. So you don't even have to change the goggles at all.

[@RCinginSC]

This is true.

[@properix9139]

Will this work with the Eachine PRO58 module or only with fatshark?

[@78Kisscool]

Nice vids ! Would you have a tutorial to do the same thing with the eachine VR D2 ? (video or photos ?) ?

[@Everett-xe3eg]

Because AV doesnt support snow or static does that mean when you fly into static the thing turns blue? Does the DVR record AV in or just the FPV feed?

[@IIIDarkWorlDIII]

Best place to solder 5 V red cable would be after the capacitor on the way to some other 5v consumer bro. Im thinking I should make a video with the explanations of where exactly to solder and also with the coax. What do you think?

[@JasonEllingsworth]

Please make a mod video! If possible making use of the a/v In jack instead of everything soldered to the board.

[@Bill-NM]

Another great video. Love to see you do this on the Fatshark Scout. Thanks.

[@RCinginSC]

Awesome. To take it a step further, instead of using the av jack to route the wires thru, drill a small hole to run wires in and leave the av jack open. Then you can still use it to run other av inputs into the jack, but I imagine you will need to unplug the module before doing that.

[@kool-k-kel]

@@Haverr1 ive seen this posted but no real answer yet...So im asking as well,, im thinking it goes to blue screen not static? white noise? etc..

[@WHAK]

@@Haverr1 В моем случае видео совсем прекращает записываться.. (Это огромная проблема!)

[@tw3413]

This is a good mod. Saved me hassle to find out where to connect what after my internal RX started going haywire. One suggestion is to install L/C filter in the power line to fatshark module as without it I had some interference/lines. I used a super micro L/C filter (www.myrcmart.com/lc-filter-super-micro-for-micro-multirotor-14s-1a-current-02g-p-11036.html) and now the signal is perfect.

[@IIIDarkWorlDIII]

How much lag does it add?

[@tgenial58]

Hi! nice mod, thank you. I'm wondering: if I remove one of the both rx5808 and connect the external module in place of the rx5808 (by taking the 5V on the connector of the module), will this work and finally, does it make a "triversity" goggles?

[@jayb6180]

lots of love drone mesh, can i do the same on fatshark recon v3? can u plz upload a short video on recon v3 showing just connecting pin images?

[@pratap3369]

thanks for posting the video in time,I'm gonna get either Ev800 or 800d. Is there any difference in picture quality between them? I'm leaning more towards EV800 and modding them with pro 58 and dvr,what do you you think?

[@DroneMesh]

Both screens are identical. However the EV800D has a built in DVR for the internal receivers. But I will be making a second part for the EV800 to add the DVR to the external fatshark modules.

[@dronereviewman9580]

I am thinking about getting the same pair!!! I also like the Viper fxt goggles!!! I need 2 save some money up and by Christmas hopefully they have a new pair of goggles coming out!??? If not I'll probably get the 800d goggles!! HAPPY FLYING

[@j.r.0420]

@@DroneMesh does this mod increase the signal penetration through obstacles like trees and buildings?

[@dickysoeliantoro5576]

Does putting the goggle to AV mode turn off the stock internal receiver? Otherwise, it's like running 2 receivers, and will be very power hungry.

[@hrithikaron1992]

Does the DVR still record?

[@dronesyfpv7232]

It works IT REALLY FUCKING WORKS!! hooked up rapid fire and checked and it said its not in low power mode

[@mastafoo886]

@Drone Mesh, from a purely logical standpoint, this should work with any goggles that have AV in right?

[@billybbob18]

That's my thought on this. I went as far as to de-pin the receiver module from the circuit board and run wires to the + - and video signal pads. Now my 40 dollar goggle has as much range as any fatshark goggle.

[@JasonEllingsworth]

@@billybbob18 can you please post a video showing this and explaining it? This sounds like a very helpful mod for the community who is new to FPV and your contribution would be greatly appreciated I am sure.

[@eddie_Za]

Love ur video. I learn alot. But im trying to use a rapidmix module which dont have physical button. Hope u can help.

[@scalpix0257]

Can you do a tutorial for the vrd2pro ? or the mods is the same as for the ev800d Good video and very good job Do you have the possibilitie to review off more fpv goggles.. Ev900.topsky 1 or 2

[@smks5]

What module is this that you use?

[@budgetdrone990]

sir, i have a question. I want to add pro58 module to my goggle. My question is, can I add this module without unsoldering the original module on the goggle board? I'm worried if I don't remove the original module, it will detect the original module even though I have installed this pro58 module.. can you answer my question?

[@paulpark4899]

Will this mod work the tobyrich goggles the one thats exactly the same as these

[@schummiehugo]

hello mister mesh. i so you haf a upgrade on the micro switchses. can you tel mi witch nummer it is ? pls.( maby a link ? olso nice this upgrade vid gr

[@slobodanbirgermajer6117]

Hey DM, I just checked. The EV800 also have AV in. So probably it is possible to do this same on EV800, and not to damage the receiver. The MENU button on the EV800 will change to AV.

[@DroneMesh]

There are 2 versions as I know for the ev800

[@slobodanbirgermajer6117]

well, I have the version with AV IN. I'm waiting for the Eachine PRO58 RX module and will try modding it by AV and not removing the internal module.

[@slobodanbirgermajer6117]

and above the all, thanks for the great work and as always great educational videos regarding FPV quads!

[@masslona]

@@slobodanbirgermajer6117 Hey, i'm very interested in the answer as well, did it work? Thank you!

[@karthikranga]

Hey! I did this mod recently and I got diagonal lines in the feed, when I changed to internal module, there were no problem. Is this because the video wire needs to be shielded? But your feed was good in the video. Let me know what you think.

[@FenyxFyre]

KARTHIK R whenever possible try to use shielded wiring. For most applications, it normally isn’t required but when working with wiring so close together having shielded wiring is almost a requirement.

[@maskfpv113]

Hi, did you solve your problem? I have the same issue, i changed the yellow wire for shielded wire but it doesn't remove the diagonale lines...

[@RavenWindrunner]

Does it hurt the goggles to power them up without antennas? Or is that only an issue for transmitters?

[@leandroebner1405]

There's NO(!) problem with ANY(!) goggle or reciever. Only with transmitters, if you're unlucky you'll fry it. Some are protected, some not. So try to avoid it in any case.

[@Tonynux]

I'd like to do that on my FXT Viper V2, but I do not understand how to switch source to VIDEO IN on the goggles. There is a HD IN source, but I think that one is for HDMI input.

[@JasonEllingsworth]

Quick question. How would adding shark byte to the ev800d work? Would it be the same? Is it even possible?

[@connellhuilcapi3369]

Bro your vids are so informative 👏👏. I learn a lot from you ur vids.

[@DFEUERMAN]

I recommend adding kapton tape to entire back of the screen. The back of the screen looks like thin-steel or aluminum, and it's is conductive. One youtuber demonstrated in his battery mod video that this metal back is charged at something like 5v, so it causes bad interference if the screen touches the circuit board. (It was happening to me.) Yeah, so about 2 or 3 single layer pieces of kapton tape did the trick! (depending on the width of the tape. I think I have a roll of 2" wide kapton.) I hope this helps someone!

[@adhvikchandran634]

Amazing video(i have this goggle),any chance you can make a jr module mod for the fs i6?

[@benjywithay7098]

Off topic question but would love some help. I'm about to buy a Rundown Night Eagle Pro 2 for my monocular... Is it possible to connect it to my phone with an Easycap adaptor? Thanks

[@JustForFunRC]

doesn't it try to go to blue-screen when the signal gets weak?

[@FPVisioning]

No

[@nejcosolnik9749]

Yes. When signal gets really weak it jumps to blue screen.

[@gombi77]

My problem is same.when the signal is low jump blue screen.what is the solution of the problem??

[@JustForFunRC]

@@gombi77 I had the blue screen because i was connecting trough the video input jack of my goggles. My solution was to remove the internal module on the googles and wire the new module directly. now it doesn't go to blue screen anymore.

[@gombi77]

@@JustForFunRC whitch pin is the video on the board? Ev800d has two module.whitch one use?

[@Reecefpv]

So got a question. If I have the 2nd version of the ev800 that has the av in like the ev800d version. Could I do it just like this except for voltage regulator to part for the ev800. Well Idk now I'm worried that if you go into bad signal the screen would just turn blue like it just did there at the end. That's scary

[@zader253]

I know this is old but oscarliang put out a build on avoiding the blue screen by wiring the the dvr in between video feed... is it possible with built in dvr

[@doom3crazy]

You ever gonna finish your aomway v1 fat shark mod ?

[@shaneintegra]

VR D2 pro! I have both an EV800D on the way and a VR D2 :D would be awesome to have that capability with them

[@GB-sv9bk]

nice, you dont happen to have a pair or recon v3 and to show how to mod

[@luiswicho5301]

That's nice. A very good idea for improving my EV800D. Thx. a lot

[@MERCURYMAD]

This should also work with AKK Diversity RX correct?

[@fezfpv]

Hi drone mesh. Great video. Can you do betafpv vr01 goggle please 🙏

[@rovingteam4508]

This 3 wire also can use for eachine pro58 module sir??

[@jasonsuryadinata4022]

is possible to just connect a a/v jack on the fatshark module and plug in in the a/v in and power the module seperately?

[@thomasgilbert6924]

hi I have both glasses ev800 and ev800d so I was wondering if I can put the battery from ev800 over to ev800d does it go the battery I have in ev800d is not so good

[@dronereviewman9580]

DRONE MESH you are the man!!! This is a great MOD!!!! I can't wait for the day i have fpv goggles that i feel comfortable flying with!!! I'm tired of flying my fpv drone's l.o.s. hahaha!! I still have a bast every time

[@billybbob18]

Some modules really need an actual 5.0 volt power supply. Not 4.8 or 4.9. Sometimes they benefit from 5.1v.

[@michaeldon69]

Will it work on EV800 as well (without killing the stock receiver)?

[@FredoCorleone]

What do you gain with the Fat Shark module?

[@shantanukashyap4981]

I want to mod tbs. fission into my 7inc monitor which is diversity , but not on AV . I want to mod on internal receivers. How to do ? Please tell

[@muhammadisnainizuhriilyas1406]

Does it increase latency ? Thanks

[@gibbyneutron8641]

Will this work for other modules like rapid fire?

[@shattereddnb3268]

Would love to see a mod video on the FXT Viper by the way!

[@farhs3133]

Do this work with the ev800? like, if I put the Boost Converter, and solder the yellow wire to video in?

[@didactylos4diddy474]

I don't see that there's enough of an advantage to make it worthwhile. I guess that means that I'm not" on trend" but I can live with that :D

[@TheLazyRocket]

Cool, this time came out cleaner but i still dont see the point

[@timwsac]

Hi can you let me have a link to the voltage regulator that you used in your esc/motor tester video thanks mate Tim

[@DroneMesh]

Voltage Regulator www.banggood.com/Small-Mini-360-Adjustable-DC-Power-Supply-Module-Mini-Step-Down-Module-p-917568.html?p=CS101558118042016088&.drone

[@JB-cq2wo]

nice work. Will your battery die faster with this mod ? hmmmm ?

[@DroneMesh]

Yes 4 receivers active. AV mode does not disable internal modules.

[@mordordronefpv6561]

Hola, sirve para otros módulos como foxxer o rapidfire?? Gracias

[@planetpower6686]

Great video. Will you mod Eachine Goggles Two

[@DroneMesh]

I'll write banggood about them and the d2 pros

[@matthewdangremond]

I'd also love to see a mod for goggles two!

[@kristofferrye2203]

what module to use in 2020?

[@yousefsaadeh7144]

Does it work with Matek 1.3GHz Video Receiver?

[@KrotowX]

Remove internal battery in favor to external Fatshark type one through 2.1mm Jack connector. Apply voltage level indicator fix. Details are described in RC Groups. And install low voltage alarm buzzer, please.

[@DroneMesh]

link?

[@KrotowX]

Yep. The voltage level indicator fix by vladG www.rcgroups.com/forums/showpost.php?p=39216109&postcount=273 Low voltage alarm for stock battery by the same guy (Attiny13 controlled) www.rcgroups.com/forums/showpost.php?p=39232074&postcount=285 www.rcgroups.com/forums/showpost.php?p=39233181&postcount=289 This guy did basically all stuff that I recommended in his way except low voltage alarm www.rcgroups.com/forums/showpost.php?p=39998406&postcount=478

[@IIIDarkWorlDIII]

Oh man that was helpful

[@giga18116]

My signal (av in) and gnd are somehow connected. Its what my multimeter shows.. any other way to do this..

[@aurisfpv3201]

you can do the same mod with ev800? the av in

[@mccolld11]

How about a VR D2 mod series?

[@hambone4779]

Is fat shark receiver that much better? I'd like to see a comparison of both feeds...I've already modded my ev800d battery this maybe next.

[@DroneMesh]

Depends there are many out there.

[@falkorfpv570]

@mckey19c I'll finally be making a mod video for this soon, as soon as my parts come in😁. My original comment isn't here anymore so I'm not sure of all that i said but I'll be doing Drone Mesh's mod (you rock) with a few tweaks, adding a headphone jack wired to the new module for sound, custom mounting breadboard wires in the front so you just plug in like an actual fatshark goggle, and a battery mod. I can't wait! Keep an eye out on my channel in a week or two and it should be done around then.

[@cedricdemets98]

Hey Falkorw i will watch your video ! Whixh module will you use and do you think this wikl work with rapidfire or wildfire ?

[@falkorfpv570]

@@cedricdemets98 I'll be using Rapidfire and it'll work with any fatshark module, i might have to step up the power to exactly 5v but we'll see when we get there!

[@falkorfpv570]

@@cedricdemets98 Ok I finally finished my mod video, sorry it took soo long! And a special thanks to Drone Mesh for starting this whole thing and showing us how to wire everything up! Here's the link to my video, enjoy! kzbin.info/www/bejne/nH-xf2Z7or9rmrc

[@Daniel-ws5tt]

So will the fatshark module work together with the ev800d module? will i fly with four antennas? In flight will i have the safety of a fatshark?

[@IIIDarkWorlDIII]

Just 2 antenna's. Video Signal comes from one single receiver => 2 antennas

[@rayandio6911]

hi sir.. can you make new video for makerfire ev800d/ls800d mod fatshark module.. im happy if you make one.. thnaks..

[@jorgeorejel9807]

You Need put 4 antenas or only 2 in the new receptor?

[@IIIDarkWorlDIII]

2 for what active is

[@rubenvaneupen7327]

I have a slightly different problem. Where to connect to AV out to the AV in on the EV800? I have a circuit board v06 version.

[@rubenvaneupen7327]

not the D version

[@haynfpv8288]

Thanks for the video man it was really helpfull🤙🏼

[@crevette337]

I think its the same for the Toby rich tr1

[@TheMadmacs]

oh, so av in does work, i wonder why i couldnt get it goin, i wanted to practice a sim with goggles but i couldnt get it to work with the jacks and video converters i have. i'll maybe look into that again.

[@weberentertainment2962]

Could it be that you are going from digital to analog video, and you don't have the right converter?

[@TheMadmacs]

yeah its digital to analogue issue or wrong pin on jack, my graphics card can do analogue but i dont think it would do a low res signal and there was no digital data back and forth to tell the graphics card to send a low res signal, normally the oldstyle vga cables could still do data to tell the graphics card what it was,

[@DroneMesh]

Waste of time to fly with goggles on sim. You want to practice muscle memory and not how fast you can achieve a headache. ;)

[@TheMadmacs]

yeah thats a good point, my goggles are extended 800d's but i still think i'd get eye strain, it would still be great to fly gta5 when the weather grounds me here in scotland

[@Jake-wl2ol]

Even hdzero module?

[@exexgr6897]

There is a new GE-FPV RX5808 with laforge V3.3 It look like this do not have USB port for firmware update.

[@DroneMesh]

There is serial pads on the boards.

[@unknw51]

Modüle Is the link available?

[@lesterbonavente659]

does this work in makerfire ev800d

[@Morthok]

Great video! thank you.